Benutzeranleitung / Produktwartung NetTool des Produzenten Fluke
Zur Seite of 43
TM PN 1560839 May 2000, Rev 2, 03/02 © 2001, 2002 Fl uke Networks. A ll rights reserve d. Printed in US A All product names ar e tradema rks of their r espective compani es.
.
i Table of Contents Title Page Ready, Aim, Register ! ...................................... 1 What is NetTool ? .............................................. 1 How to use NetTool ....................................... 2 NetTool Capabil ities ......
NetTool™ Quick Reference G uide ii Link Connec tivity Probl ems ............................ 25 Network Problems .......................................... 25 Health ......................................................... 25 NetWare ..............
1 NetTool TM Quick Referen ce Guide Ready, Aim, R egister! What’s in it for me? A FREE PER SON ALIZ ED HOL STER !!!! Get a free holster with a personal or company name embossed on it for your NetT ool by visit ing www . f l uk e n etworks . c o m and registering your NetTool today.
2 How to use NetTool I don’t have a lot of time to kill, how do I light this candle? NetTool has two RJ-45 jacks , one on either side of the unit. Plug it in and turn it on…either between two devices like a hub and a PC or directly into a wall plate to check a network drop.
3 NetTool Capabilities Service Id entif ication Telco Token Ring Ethernet Health Utiliza tion Broadcast /E rror m et er s Cable Test Wiremap PC Conf iguration Link Config Health Address es Used Server.
4 Single-Ended Mode What’s lurking behi nd that wall pl ate? Note To optimize discovery, connect NetTool with the device (lik e a PC) off, turn NetTool on, press Aut oTest, t hen turn t he devi ce on. ⇒ Plug an RJ-45 (supplied PN 642774) cable into a network drop or a single net work devic e , such as a hub, PC, server, or pri nt er.
5 Cable Testing You can check cable length, det ect split pairs, or use the wiremap adapter (s uppl i ed PN 1563930) to verify pin-to-pin c on tinuity from the near to the far end of a cable. Cable Test ⇒ Plug the cable to test into the jack on either side of the NetTool.
6 Wiremap When both ends of a cable cannot be connected to NetTool (e. g., one end is in wiri ng cl oset ), use t he external wi re map function. ⇒ At tach the near end of the cable to the NetTool. ⇒ Att ach the wiremap adapt er to the fa r end of the cable.
7 Service Identification ⇒ Plug one end of a cable into the RJ-45 jack on either side of Net Tool and the other end into any RJ-45 wa ll jac k. ⇒ Power up NetTool and select AutoTest .
8 Force Link : For a device that does not respond, NetTool enables the Force Link functi on and displays it as a menu choice below AutoTest . Sele ct Force Link and NetToo l at temp ts to force a connection with th e d evi ce. Check the users manual for more informatio n.
9 Inline Mode They say two ports are better than one… Note NetTool can’t t ell you about what it doesn’t see. NetTool must sense traff i c on a network or device so it can supply protocol or health informatio n. Inline means NetTool is connect ed between two devices simul t aneou sly like a PC and hub.
10 So what? ⇒ Select the PC or Hub icon for more link configurat i on inf ormati on, heal t h, Segment I D, and for PC s − address and server information.
11 Getting Acquainted Skip this page if you have ever used a radio… Batteries Use four (4) AA size batteri es (s upplied PN 1560231) or the optional rechargeabl e batt eries (PN 1572184) as shown (optional charger PN 1572191).
12 Buttons and Indicators Press the buttons al l you want. What you press won’t hurt you or your network. ⇒ Power – press and hold for two seconds to turn on or off. ⇒ Backlight – After NetTool has power, you may turn o n the backlight by simply pressing the power button once quickly.
13 (right) if t here there are more it em s to view. This applies to dat a screens not “sc rol l -select” scree ns.” ⇒ Press t he Up key to navigate to the (top right) and press Select to close the current screen. ⇒ Certain screens al s o display a wrench icon left of the .
14 NetTool Menus Just show me the dessert m enu. Lif e is too short not to order dessert first . There are two sets of menus to assist in troubleshoot i ng: icons on the top of the screen and the main me nu below the icons. Network Icon PC Icon Setup Icon Main Menu afq27f.
15 Duplex Settings : = Full Duplex = Half Duplex NetTool displays duplex s e ttings for each device, advertised or collis i on-det ermined. The underlinded indicat or is the confirmed dupl ex and the non- underlined value is the advert ised dupl ex. Duplex mismatc hes can i m pede communi cati on bet ween devices.
16 NetTool Menus - PC ⇒ Connect NetTool to a PC and select t he PC icon. The icon displays on t he left or ri ght, depending on where you connected the cable. ⇒ Af ter the PC sends frames, y ou can scan the PC configuration by navigati ng through t he menu.
17 Pro toc ols Exactly what l anguages are these devices speaking to each other? ⇒ Select Protoco ls to v iew the protocols s een on the desktop or network. This can be very useful for findi ng confi gurat ion mismatches. The Protoc ols screen bel ow shows such a mismatch (Apple protocol found on the network si de but not on the P C side).
18 Addres ses Used My name is, my name is… NetTool displays t he best -discov ered name on the PC as well as the IP, IP X , MAC address of the PC. It also lists DHCP or autom ati c pri v a te IP address informat ion.
19 NetTool Setup Setup options enable you to modify the displ ay and other parameters. From the main menu, se le ct the NetT o ol (middle) icon t o access t he NetTool set up options. afq07s.bmp NetTool Setting s Access S etti ngs to: ⇒ Check the batte ry level .
20 More NetToo l Setup Opt ions Other setup options i ncl ude: Unwanted Protocols IP Setup Ping List Editor Language About NetTool afq59s.bmp ⇒ Select Unwa nted Prot oco ls to specify protocols that NetTool will warn you are present on the network. This helps in situat ions like a network- wide migrati on away from certain prot ocols.
21 Network ⇒ Select the Network icon to view network activity. The icon displays on t he left or ri ght depending on where you connected the cable. Link Conf ig : (described in t he PC section). Health : (described in t he PC section). Protocols : (described in PC section).
22 NetTool Main Menu The main menu items are your starting poi nt. View NetTool’s dis c o very screens t o resolve thos e daily connecti vity battles y ou face.
23 Problems Use NetTool. Solve problems. Get home on time. It’s a beautiful thing. ⇒ Select Prob lems to view the Problem Log. The Problem Log provides a conci s e list of all problems detect ed, from physical l ayer to applicat i on layer problems.
24 Problem Displ ay The problem display area consists of these elements from left to right : P roblem Type, Problem Severity, Problem ID, and Problem Text.
25 Link Connectivity Problems • Speed mismatch • Pair m isma tch • Duplex mismatch • Polarity re versed • Level low • Transmit pai r open Network Problems Health • Short Frames rec eived (als o j abber/FCS ). • Excessive utilization seen (also collisions).
26 Name Resoluti on • No DNS s er v e r f ound on n e t work t o r e s ol v e name s . • DNS re s ol u t io n f ail ed. • W I NS r e s olution f ailed. • I n c orrect W I NS s e r v er xx x .x x x . xx x . x xx c onfigured o n PC. • No W I NS s e r v er f oun d on ne t work t o r e s o l v e na m e s .
27 Email • Unabl e to connect t o mail server. • Unabl e to connect t o SMTP server. • Unable to connect to POP2 server. • Unable to connect to POP3 server. • Unabl e to connect t o IMAP server. Printe r • Unable to connect to IP printer serv er.
28 Key Dev ices Check this out! ⇒ Select Key Devices to vie w all the servers, routers, and print ers Net T ool has found on the network. NetTool al ways att empts to display the highest lev el address possible for that device, be it a NetBIOS name, DNS name, IP address or M ac address.
29 Toolkit The right tools when you need them… ⇒ Select Toolk it to a cce ss th e Pin g, H eal th, and Reporter functi ons. These tools provide critical support for troubleshoot i ng probl ems and documenti ng your work. afq43s.bmp af q44s.bmp Note Trial uses of the Ping and Reporter features are currently provided on al l new units.
30 Ping Note The Ping option only works in single-ended mode. If you want to ping and are in inline mode you will see . Disconnect one of the RJ -45 cables from the NetTool and then rerun AutoTest .
31 ⇒ Selecting Manual configurat i on enables you to static ally ass ign to your NetTool an IP address t hat complies with your network’ s addressing sc heme. This app lies if your network does not us e DHCP or if you just prefer to manually configure it.
32 Pinging a Single Device From the main menu select Toolkit then Ping to access NetTool’ s pi ng funct i on. You can ping one IP address or a set (Ping Catalog) of address e s t hat you define using NetTool Toolkit. ⇒ To ping a single device, select Add New Device .
33 After defini ng and uploading the lists using NetTool Toolkit PC software, Net Tool displays the catalogs us i ng the names you gave them. ⇒ Select Pin g Ca talo g from the Toolk it menu. ⇒ Select one of the catalogs by highlight i ng it then pressing Select .
34 Health Doctor, I hav e a pain in my network. ⇒ Select Health from the Toolki t m enu to view the health of fram es and to simultaneously check each side o f the conv ersation for healt hy frames in real time.
35 Reporter Get the fa cts. .. Note To take full advantage of the Reporter function, the PC you use m ust be enabled t o communic ate properl y wi t h NetT ool. Make sure you instal l and start t he NetTool Blaster and NetT ool Toolkit PC soft ware that came with your purchase.
36 Workin g with NetTool R eports NetTool’s Reporter option can s ave the current st ate of what NetTool detects on the PC (or other device) and the network and you can give that collect ed data a unique name. ⇒ Connect NetTool to the device(s) y ou are checking and select AutoTest .
37 ⇒ After you have entered a useful name for the report press S elect and navigat e to and select Save Report or Delete Report . ⇒ Aft er you save reports (up to 10 can be stored on the NetTool), you can then use NetTool Toolkit to upload, view, or print the reports .
38 NetTool Updates, etc. Don’t miss out… Get updates to NetTool soft ware when t he y are released. To check the version you have, select the NetTool icon and then About NetTool.. . ⇒ To find out if there is a new version avaialble, a cc e s s ww w .
39 NetTool TM Blaster What would we do without a littl e soft ware i n our lives? Updating NetT ool is a simple process that requires you to run the update program that came on CD-ROM or from the web. ⇒ If you received the upgrade on CD-ROM, follow the i n structi on s on the sc reen to instal l the NetTool Blaster! program.
Ein wichtiger Punkt beim Kauf des Geräts Fluke NetTool (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fluke NetTool noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fluke NetTool - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fluke NetTool reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fluke NetTool erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fluke NetTool besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fluke NetTool verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fluke NetTool. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fluke NetTool gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
