Benutzeranleitung / Produktwartung HASXEE-IM-HS des Produzenten Emerson
Zur Seite of 502
www .EmersonProcess.com Instruction Manual HASXEE-IM-HS 10/2010 Gas Analyzer Series Instruction Manual.
ESSENTIAL INSTRUCTIONS READ THIS P AGE BEFORE PROCEEDING! Emerson Process Management (Rosemount Analytical) designs, manufactures and tests its products to meet many national and international standards.
Emerson Process Management GmbH & Co. OHG T OC-1 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 T OC T able of contents SHORT FORM GUIDE FOR THIS MANUAL T o nd information about see chapte.
Emerson Process Management GmbH & Co. OHG TOC-2 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 T able of C onTenTs Introduction S-1 Denitions S-1 T erms used in this instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emerson Process Management GmbH & Co. OHG T OC-3 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 T OC T able of contents Chapter 2 T echnical data 2-1 2 . 1 C o m m o n T e c h n i c a l D a t a ................................................
Emerson Process Management GmbH & Co. OHG TOC-4 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 5 . 3 . 1 D i s p l a y .............................................................. 5 - 3 5 . 3 . 2 S t a t u s L i n e ........................
Emerson Process Management GmbH & Co. OHG T OC-5 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 T OC T able of contents 7 . 4 . 8 R e s t o r i n g a C a l i b r a t i o n ................................................ 7 - 4 0 7.4.7 Cancelling an Ongoing Calibration .
Emerson Process Management GmbH & Co. OHG TOC-6 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 Chapter 9 Modbus Functions 9-1 9 . 1 A b s t r a c t .............................................................. 9 - 1 9 . 1 . 1 M o d b u s T C P / I P .
Emerson Process Management GmbH & Co. OHG T OC-7 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 T OC T able of contents I ndex of T ables T ab. 3-1: Standard paramagnetic sensor - cross interference by accompanying gases ............. 3-6 T ab.
Emerson Process Management GmbH & Co. OHG TOC-8 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 I ndex of f Igures Fig. 1-1: X-STREAM front panel (here the X-STREAM XEGP) ............................................1-3 Fig. 1-2: Optional heated area .
Emerson Process Management GmbH & Co. OHG T OC-9 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 T OC T able of contents Fig. 3-8: Wheatstone Bridge ..............................................................................................
Emerson Process Management GmbH & Co. OHG TOC-10 X-STREAM XE Instruction manual HASXEE-IM-HS 10/2010 Fig. 6-1: X-STREAM XE Software menu structure ...............................................................6-2 Fig. 6-2: Measurement display elements .
Emerson Process Management GmbH & Co. OHG S-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 S Safety Instructions The instruction manual contains information about the component assembly , function, installation, operation and maintenance of the X-STREAM ® series gas analyzers.
Emerson Process Management GmbH & Co. OHG S-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 TERMS USED IN THIS INSTRUCTION MANUAL Lower Explosion Limit (LEL) V olume ratio of ammable gas in air below which an explosive gas atmosphere will not be formed: the mixture of gas and air lacks sufcient fuel (gas) to burn.
Emerson Process Management GmbH & Co. OHG S-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 S Safety Instructions This symbol attached to the unit ... ... means dangerous voltages may be exposed. Covers may only be removed when power to the unit is disconnected, and only be trained personnel.
Emerson Process Management GmbH & Co. OHG S-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 This symbol used in the manual ... ... means dangerous voltages may be exposed hot surfaces may be.
Emerson Process Management GmbH & Co. OHG S-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 S Safety Instructions INTENDED USE ST A TEMENT X-STREAM series gas analyzers are intended to be used as analyzers for industrial pur- poses. They must not be used in medical, diagnostic or life support applications nor as safety devices.
Emerson Process Management GmbH & Co. OHG S-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 DISPOSAL OF BA TTERIES • This instrument contains a Li battery (button cell) of type CR 2032. • The battery is soldered and usually does not need to be replaced during the instrument´s lifetime.
Emerson Process Management GmbH & Co. OHG S-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 S Safety Instructions Safety Instructions INST ALLING AND CONNECTING THE UNIT The followi ng no tices shou ld be care follo wed to ensur e com plian ce wi th th e low vol tage directi ve (Europe) and other applicable regulations .
Emerson Process Management GmbH & Co. OHG S-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Safety Instructions EXPLOSION HAZARD Th e u ni ts de sc ri bed in th is man ua l may n ot be u sed in ex pl os ive atm os ph ere s without additional safety measures.
Emerson Process Management GmbH & Co. OHG S-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 S Safety Instructions Safety Instructions HEA VY INSTRUMENT The models intended for outside and wall mounted use (X-STREAM XEF , XDF and XEFD) weigh between 26 kg (57 lb) and 63 kg (139 lb) depending on options installed.
Emerson Process Management GmbH & Co. OHG S-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Safety Instructions GASES AND PREP ARA TION OF GASES GASES HAZARDOUS TO HEAL TH Follow the safety precautions for all gases (sample and span gases) and gas cylinders.
Emerson Process Management GmbH & Co. OHG S-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 S Safety Instructions Safety Instructions POWER SUPPL Y CONNECTING UNITS FOR PERMANENT INST ALLA TION Only qualied personnel following all applicable and legal regulations may install the unit and connect it to power and signal cables.
Emerson Process Management GmbH & Co. OHG S-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 General Operational Notes GENERAL OPERA TING NOTES • The unit must be installed in a clean and dry area protected from strong vibrations and frost .
Emerson Process Management GmbH & Co. OHG 1-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Chapter 1 T echnical Description The fo ll owi ng are the main fe atu res of th e n ew Emerson Pro.
Emerson Process Management GmbH & Co. OHG 1-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1 T echnical Description • Non-ince ndive assem bly for ins tallation in Zone 2 and Div 2 for the measurement of non-ammable gases. • Simplified purge system (Z-purge) for installation in North American Div 2 envi- ronments.
Emerson Process Management GmbH & Co. OHG 1-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.1 Overview Fig. 1-1: X-STREAM Front Panel (here the X-STREAM XEGP) 1.1.1 The Front Panel The graphic LCD shows measurement and status information with plain text and sym - bols.
Emerson Process Management GmbH & Co. OHG 1-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.1 Overview Further analyzer features include (so me of them optional): • Congurable measurement display: • gas measurements results and/or se- condary results (e.
Emerson Process Management GmbH & Co. OHG 1-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.2 Conguration of Gas Lines 1.2 Conguration of Gas Lines V arious materials are available to allow the analyzer to be customized to your needs.
Emerson Process Management GmbH & Co. OHG 1-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.2 Conguration of Gas Lines 1.2.6 Optional Components for Gas Lines The analyz ers ca n, as an op tion , be tted with further components.
Emerson Process Management GmbH & Co. OHG 1-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.2 Conguration of Gas Lines 1.2.6.5 I n te rn al T emperature Sensors In the same way as press.
Emerson Process Management GmbH & Co. OHG 1-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.2.6.7 Optional Heated Area The physical components can be optionally se p ar a t ed fr o m th e e l e ct r i ca l c om p o ne n t s by means of a special box (not an option for ½ 19 in units).
Emerson Process Management GmbH & Co. OHG 1-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.2 Conguration of Gas Lines De pen ding o n t he ap pl ica tion an d th e sele ct ed analyzer options, alternative gas line congu- rations are available, exemplied in the follo- wing diagram of a dual-channel analyzer: 1.
Emerson Process Management GmbH & Co. OHG 1-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.3 Interfaces 1.3.1 Analog Outputs By default each X-STREAM analyzer is t- ted with one output per channel, which can transmit data on concentration levels to an external data acquisition system.
Emerson Process Management GmbH & Co. OHG 1-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.3 Interfaces The Ethernet Modbus interface of fers the same form of communication with a data acquisition system as does a serial interface.
Emerson Process Management GmbH & Co. OHG 1-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.3 Interfaces In addition to the 4 default digital outputs, analyzers can optionally be upgraded with 9 or 18 more digital outputs ( 1-13) , to be used for various purposes, e.
Emerson Process Management GmbH & Co. OHG 1-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.4 Comparison of Analyzer Models 1.4 Comparison of the V arious X-STREAM Analyzer Models 1 ⁄ 2.
Emerson Process Management GmbH & Co. OHG 1-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1 ⁄ 2 19 in housing, table-top or rackmountable, protection type: IP 20 1 ⁄ 1 19 in housing, .
Emerson Process Management GmbH & Co. OHG 1-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.5 X-STREAM XEGC: ½ 19 Inch T able-T op Unit 1.5 X-STREAM XEGC This compact model for general purposes can be tted with up to three photometer measurement channels (IR or UV) and one additional non-photometer channel (eO 2 , pO 2 or WLD).
Emerson Process Management GmbH & Co. OHG 1-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.5 X-STREAM XEGC Fig. 1-7: X-STREAM XEGC - Views 7 8 9 10 1 Status line 2 Graphic display 3 Mess.
Emerson Process Management GmbH & Co. OHG 1-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.6 X-STREAM XEGP: 19 Inch T able-T op or Rackmount Design 1.6 X-STREAM XEGP This model can be fitted with up to four measurement channels in any combination.
Emerson Process Management GmbH & Co. OHG 1-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Fig. 1-8: X-STREAM XEGP - Details 1 Status line 2 Graphic display 3 Messages line 4 home key 5 enter key 6 4 keys for adjustment and menu selection 1.
Emerson Process Management GmbH & Co. OHG 1-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.7 X-STREAM XE Field Housing 1.7 X-STREAM XEF/XDF: Field Housing With Single Or Dual Compartment The eld housing model is conceived for outdoor use and wall-mounting.
Emerson Process Management GmbH & Co. OHG 1-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Fig. 1-9: X-STREAM XEF / XDF- Front Views 1.7 X-STREAM XE Field Housing HEA VY INSTRUMENT X-STREAM eld housings, intended for outside and wall mounted use, weigh approx.
Emerson Process Management GmbH & Co. OHG 1-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.7 X-STREAM XE Field Housing Fig. 1-10: X-STREAM XEF - Right Side and Bottom V iew 1 Cable gland for power cable 2 Cable glands for signal cables 3 4 brackets for wall-mounting 4 Gas in- & outlets (max.
Emerson Process Management GmbH & Co. OHG 1-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.7 X-STREAM XE Field Housing 1 Screw-type terminals for signal cables 2 Power line lter 3 Cable glands 4 Power supply terminals with integrated fuses 5 Ethernet and USB connectors Fig.
Emerson Process Management GmbH & Co. OHG 1-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.7.1 Field Housings for Installation in Hazardous Areas (Ex-Zones) Special X-STREAM eld housi.
Emerson Process Management GmbH & Co. OHG 1-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.8 X-STREAM XEFD 1.8 X-STREAM XEFD: Cast Aluminum Flameproof Housing Th e mos t obvi ous X-S TR EA M XEFD ana ly ze r feature is its ameproof housing ( g.
Emerson Process Management GmbH & Co. OHG 1-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 gases. The assignments of the connectors is given on an adhesive label situated near the connectors.
Emerson Process Management GmbH & Co. OHG 1-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.8 X-STREAM XEFD HEA VY INSTRUMENT The model X-STREAM XEFD, intended for outside and wall mounted use, weighs approx. 63 kg (139 lb), depending on options installed.
Emerson Process Management GmbH & Co. OHG 1-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1.8 X-STREAM XEFD 1 T erminals for signal cables (shown fully populated) 2 Power line lter 3 Cable inlets for power and signal cables 4 Power supply terminals with integrated fuses 5 Ethernet and USB connectors Fig.
Emerson Process Management GmbH & Co. OHG 1-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010.
Emerson Process Management GmbH & Co. OHG 2-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data Chapter 2 T echnical Data This chapter contains all the technical details of the analyzers, divided into common and model-specic data.
Emerson Process Management GmbH & Co. OHG 2-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.1 Common T echnical Data 2.1 Common T echnical Data Gas parameters Chapter 3 “Measuring principles” Purging option The purging medium (e.
Emerson Process Management GmbH & Co. OHG 2-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data Interfaces, signal inputs and outputs Interface signals are accessed in differen.
Emerson Process Management GmbH & Co. OHG 2-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.1 Common T echnical Data Optional interfaces for all models Digital I/O board 7 or 14 digital inputs (X-STREAM XEGC: max. 7 in- puts) electrical specication max.
Emerson Process Management GmbH & Co. OHG 2-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.1 Common T echnical Data Optional interfaces for all models Analog I/O board 2.
Emerson Process Management GmbH & Co. OHG 2-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.2.1 Model-Specic T echnical Data: X-STREAM XEGC Fig.
Emerson Process Management GmbH & Co. OHG 2-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.2.1 Model-Specic T echnical Data: X-STREAM XEGC Fig.
Emerson Process Management GmbH & Co. OHG 2-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.2.1 Model-Specic T echnical Data: X-STREAM XEGC T emperatures operational 0 ... +50 °C / 32 ... 122 °F storage -20 ... +70 °C / -4 ... -158 °F Weight, max 8 .
Emerson Process Management GmbH & Co. OHG 2-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.2.1 Model-Specic T echnical Data: X-STREAM XEGC Nominal input voltage 120 / 230 V 50/60 Hz Input voltage range 95 - 138 V / 187 - 264 V , 47 - 63 Hz Power consumption max.
Emerson Process Management GmbH & Co. OHG 2-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.2.1 Model-Specic T echnical Data: X-STREAM XEGC This PSU can optionally be ordered for rack installation. T wo variations are available: • with blind front panel, connectors at the rear side • with rear panel, connectors to the front.
Emerson Process Management GmbH & Co. OHG 2-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.2.1 Model-Specic T echnical Data: X-STREAM XEGC This PSU can optionally be ordered for powering 2 tabletop units with a single common power supply .
Emerson Process Management GmbH & Co. OHG 2-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.2.2 Model-Specic T echnical Data: X-STREAM XEGP 2.2.2 X-STREAM XEGP: 19 Inch T abletop and Rack-Mount Models Fig. 2-7: X-STREAM XEGP - Dimensions approx.
Emerson Process Management GmbH & Co. OHG 2-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.2.2 Model-Specic T echnical Data: X-STREAM XEGP T emperatures operational 0 ... +50 °C / 32 ... 122 °F storage -20 ... +70 °C / -4 .
Emerson Process Management GmbH & Co. OHG 2-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Fig. 2-8: X-STREAM XEGP - Power Supply and Signal Connections 1 Power connector 2 Fuse holder 3 Power switch 4 Signal connectors (some optional; CAN projected) 3 1 2 4 2.
Emerson Process Management GmbH & Co. OHG 2-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.2.3 Model-Specic T echnical Data: X-STREAM XE Field Housing 2.
Emerson Process Management GmbH & Co. OHG 2-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2.2.3 Model-Specic T echnical Data: X-STREAM XE Field Housing Fig.
Emerson Process Management GmbH & Co. OHG 2-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data 2.2.3 Model-Specic T echnical Data: X-STREAM XE Field Housing T emperatures operational 0 (-20) ... +50 °C / 32 (-4) ... 122 °F storage -20 .
Emerson Process Management GmbH & Co. OHG 2-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Fig. 2-12: X-STREAM XE Field Housing - Power Supply T erminals / Fuse Holders 2.2.3 Model-Specic T echnical Data: X-STREAM XE Field Housing 1 Ethernet & USB (CAN projected) 2 Analog & digital I/O terminal strips 3 Max.
Emerson Process Management GmbH & Co. OHG 2-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data Fig. 2-14: X-STREAM XEFD - Dimensions T ransport lugs to be removed after installation Cable inlets (enclosure threads; M20 x 1.5) Flame arrestors with gas ttings (enclosure threads: M18 x 1.
Emerson Process Management GmbH & Co. OHG 2-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 T emperatures operational 0 (-20) ... +50 °C / 32 (-4) ... 122 °F storage -20 ... +70 °C / -4 ... -158 °F Weight, max up to approx. 63 kg / 138.
Emerson Process Management GmbH & Co. OHG 2-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 2 T echnical Data Fig. 2-15: X-STREAM XEFD - Power Supply T erminals / Fuse Holders 3 2 4 1 1 Power terminals with integrated fuse holders 2 Protective earth terminal (PE) 3 Power cable entry 4 EMI power supply lter 2.
Emerson Process Management GmbH & Co. OHG 2-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 NO:FS 150 ... 5000 ppm IR UV UV eO2 1 1812345678 NO 2 :FS 100 ... 5000 ppm SO 2 :FS 100 ... 5000 ppm O 2 :FS 5 ... 25 % NO:FS 150 ... 5000 ppm IR UV UV eO2 1 1912345678 NO 2 :FS 100 .
Emerson Process Management GmbH & Co. OHG 3-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles Chapter 3 Measuring Principles 3.1 Infrared Measurement (IR) Ultraviolet Measurement (UV) 3.1.1 IntrinzX T echnology X-STREAM series analyzers support several measuring principles depending on the gas component of interest.
Emerson Process Management GmbH & Co. OHG 3-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3.1 Infrared (IR) and Ultraviolet (UV) Measurement lution frequency . As a result, the proof peak process is integrated into the measurement information, in contrast to being articially inserted in the measurement signal.
Emerson Process Management GmbH & Co. OHG 3-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.1.2 NDIR Detector Fig. 3-2: Gas Detector Design Principle Compensation chamber Fill.
Emerson Process Management GmbH & Co. OHG 3-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Fig. 3-3: Photometer Assembly Principle 3.1.3 T echnical Implementation 3.
Emerson Process Management GmbH & Co. OHG 3-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.2 Oxygen Measurement 3.2 Oxygen Measurement T wo different principles are used for mea - suring oxygen concentrations.
Emerson Process Management GmbH & Co. OHG 3-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3.2 Oxygen Measurement 3.2.1.1 Cross Interferences by Accompanying Gases The table below shows, how accompanying gases interfere the paramagnetical oxygen measurement.
Emerson Process Management GmbH & Co. OHG 3-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.2 Oxygen Measurement T ab. 3-2: Solvent Resistant Paramagnetic Sensor - Approved Solvents Component Measuring cell type Solvent resistant Corrosion resistant (Chlorine, dry) Case SS 1.
Emerson Process Management GmbH & Co. OHG 3-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3.2 Oxygen Measurement 3.2.2 Electrochemical Measurement (I) This sensor utilizes the principle of galvanic cells, g. 3-5 shows the design. Fig. 3-5: Electrochemical Sensor - Design Principle Fig.
Emerson Process Management GmbH & Co. OHG 3-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.2 Oxygen Measurement Resistance (6) Thermistor (5) (1 1) (red) (black) (+) Lead anode (1) (-) Gold cathode (2) Electrochemical reaction: Electrolyte (3) Fig.
Emerson Process Management GmbH & Co. OHG 3-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3.2 Oxygen Measurement Due to the measuring principle the electro- chemical oxygen cell requires a minimum internal consumption of oxygen (residual humidity avoids drying of the cell).
Emerson Process Management GmbH & Co. OHG 3-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.3 Thermal Conductivity Measurement Th er ma l c on duc tivi ty i s t he pr op er ty of a ma te - rial that indicates its ability to conduct heat.
Emerson Process Management GmbH & Co. OHG 3-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3.3.2 T echnical Implementation A block made of stainless steel contains two gas paths. Both, the volume of the block and the mass of the sensors have been minimi- zed in order to obtain short response times.
Emerson Process Management GmbH & Co. OHG 3-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.6 Measurement Specication 3.4 Measurement Specication Sample gas components and measuring ranges (standard congurations) Note! The following table gives an overview only .
Emerson Process Management GmbH & Co. OHG 3-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3.6 Measurement Specication General Performance Specications T ab. 3-8: General Measurement Performance Specications Notes! Not all data listed above are applicable to all analyzer versions (e.
Emerson Process Management GmbH & Co. OHG 3-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 3 Principles 3.6 Measurement Specication Special Performance Specications for Gas Purity Measurements (ULCO & ULCO 2 ) T ab.
Emerson Process Management GmbH & Co. OHG 3-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010.
Emerson Process Management GmbH & Co. OHG 4-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation Chapter 4 Installation This chapter describes the correct installation procedure for the various X-STREAM analyzer versions. On receipt, check the packaging and its contents thoroughly for damage.
Emerson Process Management GmbH & Co. OHG 4-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.2 Installation - Introduction In order to comply with regulations on elec- tromagnetic compatibility , it is recommended to us e o nl y s hi el de d c ab le s w hi ch c an be supplied by Emerson Process Management.
Emerson Process Management GmbH & Co. OHG 4-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.3 Installation - Gas Conditioning 4.
Emerson Process Management GmbH & Co. OHG 4-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.3 Installation - Gas Preparation The number of gas connections and their conguration may vary according to analyzer version and installed options.
Emerson Process Management GmbH & Co. OHG 4-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation Internal solenoid valve block The max. permissable overpressure for all gases is restricted to 500 hPa if the analyzer is tted with an internal solenoid valve block.
Emerson Process Management GmbH & Co. OHG 4-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.4 Electrical Connections 4.4 Installation - Electrical Connections ELECTRICAL SHOCK HAZARD Only qualied personnel, observing all applicable technical and legal requirements, may install these devices and connect power and signal cables.
Emerson Process Management GmbH & Co. OHG 4-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5 Analyzer Specic Instructions for Installation 4.
Emerson Process Management GmbH & Co. OHG 4-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Plugs and sockets required for the electrical connections are on the rear panel of the units (g. 4-4 & 4-5). X-STREAM XEGP analyzers provide an in- ternal widerange power supply for worldwide use.
Emerson Process Management GmbH & Co. OHG 4-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation The number and conguration of the gas inlets and outlets vary from model to model and are indicated on the notice on the rear of the instrument.
Emerson Process Management GmbH & Co. OHG 4-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.4.2 Installation - X-STREAM XEGP Fig. 4-6: X-STREAM XEGP - Rear Panel, Model With T erminal Ada.
Emerson Process Management GmbH & Co. OHG 4-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.1 Installation - X-STREAM XEGC, X-STREAM XEGP Fig.
Emerson Process Management GmbH & Co. OHG 4-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.5.1 Installation - X-STREAM XEGC, X-STREAM XEGP Fig. 4-8: Plug X2 - Serial Interface Serial interface For specications and notes on control, see chapter 7 Pin 1 Pin 8 Ethernet connector Pin no.
Emerson Process Management GmbH & Co. OHG 4-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation Pin Signal P2.1 Channel 1, (+) 4 (0) - 20 mA P2.2 Channel 1, GND P2.3 Channel 2, (+) 4 (0) - 20 mA P2.4 Channel 2, GND P2.5 Channel 3, (+) 4 (0) - 20 mA P2.
Emerson Process Management GmbH & Co. OHG 4-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.5.1 Installation - X-STREAM XEGC, X-STREAM XEGP Fig.
Emerson Process Management GmbH & Co. OHG 4-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.1 Installation - X-STREAM XEGC, X-STREAM XEGP Pin Signal P3.1 Input 1 P3.2 Input 2 P3.3 Input 3 P3.4 Input 4 P3.5 Input 5 P3.6 Input 6 P3.
Emerson Process Management GmbH & Co. OHG 4-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.5.1 Installation - X-STREAM XEGC, X-STREAM XEGP Fig. 4-12: Plug X5 - Analog Inputs Note! Consider the installation notes in section 4.6. Analog inputs Analog inputs are located on a 9-pole submin-D-connector (plug X5; Fig.
Emerson Process Management GmbH & Co. OHG 4-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.1 Installation - X-STREAM XEGC, X-STREAM XEGP Fig.
Emerson Process Management GmbH & Co. OHG 4-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Power supply X-STREAM XEGC 24 VDC is supplied to the unit by means of a three-pin XLR connector on the rear panel of the instrument.
Emerson Process Management GmbH & Co. OHG 4-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.2 Installation - X-STREAM XE Field Housings 4.5.2 X-STREAM XEF , X-STREAM XDF Fitted with four eyebolts and featuring IP66/ T ype 4X protection, the X-STREAM XE eld Fig.
Emerson Process Management GmbH & Co. OHG 4-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 All dimensions in mm [inches in brackets] Cable glands Connector for potential equalization Gas ttings 4.5.2 Installation - X-STREAM XE Field Housings Fig.
Emerson Process Management GmbH & Co. OHG 4-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.2 Installation - X-STREAM XE Field Housings Power and si gnal cables ar e conne cted using internal screw-type terminals. This requires opening the unit, which in turn requires relea- sing the fasteners on the housing.
Emerson Process Management GmbH & Co. OHG 4-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.5.2 Installation - X-STREAM XE Field Housings Installing cable glands with shielded cables 3 . Feed cable through dome nut and clam- ping insert 4 .
Emerson Process Management GmbH & Co. OHG 4-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.2 Installation - X-STREAM XE Field Housings The number of actually available signal out- puts, and also the number of built-in modules wit h scr ew-t ype termin als, var ies accord ing to the conguration of the unit.
Emerson Process Management GmbH & Co. OHG 4-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.5.2 Installation - X-STREAM XE Field Housings Fig. 4-18: T erminal Block X1 - Analog Signals and Relay Outputs 1-4 Note! Consider the installation notes in section 4.
Emerson Process Management GmbH & Co. OHG 4-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.2 Installation - X-STREAM XE Field Housings Serial interface Specication and interface control: Chapter 9 Fig. 4-19: T erminal Block X1 - Serial Interface Notes! Consider the installation notes in section 4.
Emerson Process Management GmbH & Co. OHG 4-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.5.2 Installation - X-STREAM XE Field Housings The RJ45 connectors are located on an electronics board in the card cage section of th e u n it (F ig .
Emerson Process Management GmbH & Co. OHG 4-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.5.2 Installation - X-STREAM XE Field Housings Fig.
Emerson Process Management GmbH & Co. OHG 4-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Analog Inputs Pin Signal P3.1 not used P3.2 not used P3.3 not used P3.4 not used P3.5 not used P3.6 not used P3.7 not used P3.8 not used P3.9 not used P3.
Emerson Process Management GmbH & Co. OHG 4-29 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation Feed the power cable through the cable gland at the instrument´s right side and strip the outer insulation.
Emerson Process Management GmbH & Co. OHG 4-30 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 When all connec tions are correctl y made and checked, • close the front panel and secure with the two fasteners.
Emerson Process Management GmbH & Co. OHG 4-31 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation 4.6 Notes On Wiring Signal Inputs and Outputs 4.
Emerson Process Management GmbH & Co. OHG 4-32 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 On-site conditions often differ from test environments and may require special pre- cautio ns. Such a case arise s when str ong electromagnetic elds which could induce an interference current in the shielding.
Emerson Process Management GmbH & Co. OHG 4-33 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation Fig. 4-27: Shield Connector T erminal With Cable 4.6 Installation - Notes on Wiring The shield connector must be ordered to t the cable diameter , and can be retrotted: Ø 1.
Emerson Process Management GmbH & Co. OHG 4-34 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4.6.2 Wiring Inductive Loads Switching inductive loads creates electroma- gnetic interference: When an inductive load (e.
Emerson Process Management GmbH & Co. OHG 4-35 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 4 Installation Frequently , several loads in one system are controlled by several analyzer outputs, whe- reby the power for the loads derives from a common source.
Emerson Process Management GmbH & Co. OHG 4-36 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010.
Emerson Process Management GmbH & Co. OHG 5-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup Chapter 5 Startup Once the unit has been unpacked and in - stalled, it is recommended to rst check the settings, and if necessary adjust them to the user ’s needs.
Emerson Process Management GmbH & Co. OHG 5-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.2 Symbols Used 5.2 Symbols and T ypographical Conventions In the following sections, the symbols and typographical conventions explained below are used to describe the software menus and navigation.
Emerson Process Management GmbH & Co. OHG 5-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 10.000 ppm Ch1 CO 5.000 ppm Ch2 CO 7.000 ppm Ch3 CO 20.
Emerson Process Management GmbH & Co. OHG 5-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.3.3 Keys Six keys enable the use of the menu system. Depending on the operational mode (measu- ring, browsing menus, editing) they have the following functions: enter key: Mode Function Measuring Enter main menu Browsing Open submenu (.
Emerson Process Management GmbH & Co. OHG 5-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup left key: Mode Function Measuring Enter main menu or open 2 nd meas urement disp lay pag.
Emerson Process Management GmbH & Co. OHG 5-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.4 Software The ana lyz er s oft ware dis pla ys m easu rem ent result s and sta tus mess ages, al lows par ame- ters to be set and edited, and maintenance functions (e.
Emerson Process Management GmbH & Co. OHG 5-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.4 Software Some menus hav e more entries than can di s- played at once. In these menus, an indicator in the last ( ) and/or rst ( ) line indicates the direction the menu continues in.
Emerson Process Management GmbH & Co. OHG 5-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.4 Software Component selection menu Within the analyzer software, one can distin- guish between analyzer related and compo- nent related menus: While the rst contain entries, relevant for the analyzer (e.
Emerson Process Management GmbH & Co. OHG 5-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.4.1 Access Levels & Codes Ac ce ss le vels can be use d to pre ven t ch ange s to parameters by unauthorised personnel.
Emerson Process Management GmbH & Co. OHG 5-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.5 Powering Up De pen ding o n t he la st ac ti on per fo rme d by th e user , one of the following messages may be displayed to assist or inform the user .
Emerson Process Management GmbH & Co. OHG 5-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup The setup menu enables several additional congurations, e.
Emerson Process Management GmbH & Co. OHG 5-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 If the analyzer is operational and it becomes clear that the incorrect language has been set, which is unintelligible to the operator , the 5.6 Selecting the Language 5.
Emerson Process Management GmbH & Co. OHG 5-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.7 Checking the Settings Starting with the measurement display ( page 5-1 1), pressing.
Emerson Process Management GmbH & Co. OHG 5-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.7 Checking the Settings Press left to return to seTuP , highlight " In- stalled options" and press enter . This 2 pages menu indicates, which of the possible opt ional compo nents are insta lled in the unit.
Emerson Process Management GmbH & Co. OHG 5-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.7 Checking the Settings Check the settings for the measurement display , temperature and pressure units, and for menu access: press enter to open DIS- PLA Y .
Emerson Process Management GmbH & Co. OHG 5-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Multi-channel unit: Select the component to be set in the gas component selection menu. Once the display settings have been chek- ked, press l e f t to r e t ur n t o S E T U P a n d open CALIBRA TION to check the calibration settings.
Emerson Process Management GmbH & Co. OHG 5-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup Signal damping (set in DAMPING) allows smoothing the output signal, but also affects the response time of outputs and display: • The factory setting is 0 seconds.
Emerson Process Management GmbH & Co. OHG 5-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.7 Checking the Settings Press left t o r e t ur n t o S E T UP , a n d t h e n open I N/OUTPU TS, and from th ere ANALOG OUTPUTS. 5.7.4 Setting the Analog Outputs Select the analog output you like to check.
Emerson Process Management GmbH & Co. OHG 5-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.7 Checking the Settings *) Numbers 1 to 5 refer to components [chan- nels] 1 to 5: In.
Emerson Process Management GmbH & Co. OHG 5-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Signal: Comp1 OutRange: 0-20 mA Low Scale: 0.00 Max Scale: 100.
Emerson Process Management GmbH & Co. OHG 5-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.7 Checking the Settings T ab. 5-1: Analog Output Signals Settings and Operation Modes Output signal, if Column A B C D E F G "OutRange" "FailMode" Failure signal level acc.
Emerson Process Management GmbH & Co. OHG 5-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Signal: Comp1 OutRange: 0-20 mA Low Scale: 0.00 Max Scale: 100.
Emerson Process Management GmbH & Co. OHG 5-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.7 Checking the Settings Press lef t until SETUP is displayed, then open ALARMS - CONCENTRA TION 5.
Emerson Process Management GmbH & Co. OHG 5-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.7 Checking the Settings Y ou may turn the alarm function On or Off se pa ra te ly for e ac h chan nel (" A larm Mon it or ") . It´s also possible to use only some of the thresholds.
Emerson Process Management GmbH & Co. OHG 5-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5 Startup 5.7 Checking the Settings Y ou have now completed checking the unit’ s settings: • Press home to return to the MEASURE- MENT DISPLA Y .
Emerson Process Management GmbH & Co. OHG 5-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 5.8 Perform a Calibration 5.8 Perform a Calibration We reco mmend to perfo rm at least a zero calibration, after startup of the instrument, to ensure proper measuring results.
Emerson Process Management GmbH & Co. OHG 6-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Chapter 6 User Interface and Software Menus This cha pter descri bes the str ucture and con- tent of the X-STREAM gas analyzer software menus.
Emerson Process Management GmbH & Co. OHG 6-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2 Menu System Fig. 6-1: X-STREAM XE Software Menu Structure 6.2 Menu System Notes! This gure applies to software revision 1.0.x Numbers are page numbers of this manual, where the associated menu is explained.
Emerson Process Management GmbH & Co. OHG 6-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Control Menu 6-5 Event/Calibration logger 6-20 Data logger 6-19 Ranges Menu 6-18 .
Emerson Process Management GmbH & Co. OHG 6-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Control.. Setup.. Status.. Info.. Service.. 6.2 Menu System MEASUREMENT DISPLA Y Setup the instrum.
Emerson Process Management GmbH & Co. OHG 6-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.2 Control Menu Press enter in this line to lock all menus, for which "Code" in MENU ACCESS has been set to On ( 6-32) 6.
Emerson Process Management GmbH & Co. OHG 6-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Zero Calibration Cancel! Start! Zero Gas 0.000 ppm Concentration 0.000 ppm Flow 0.00 l/min Status.. Results.. Restore.. 6.2.2.1 Zero Calibration Menu Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be calibrated.
Emerson Process Management GmbH & Co. OHG 6-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Span Calibration Cancel! Start! Span Gas 0.000 ppm Concentration 0.000 ppm Flow 0.00 l/min Status.. Results.. Restore.. 6.2.2.2 Span Calibration Menu Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be calibrated.
Emerson Process Management GmbH & Co. OHG 6-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.2.3 Advanced Calibration Menu 6.2.2 Control Menu Note ! This menu is only available if “V alves” in IN- ST ALLED OPTIONS is set to a value other than none .
Emerson Process Management GmbH & Co. OHG 6-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.2 Control Menu Open a submenu to see calibration status summary for all chann.
Emerson Process Management GmbH & Co. OHG 6-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Zero&Span Single Cancel! Start! Zero Gas 0.000 ppm Span Gas 500.
Emerson Process Management GmbH & Co. OHG 6-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Calibration Status Summary Cancel! Calibration Status Single.. Current Action Ready Action Detail Off Current Duration 0 s Prev . Duration 0 s Current Step 0 6.
Emerson Process Management GmbH & Co. OHG 6-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Calibration Status Single Cancel! CalibrStatus Ready Remaining T ime 0 s Concentration 0.000 ppm Zero Gas 0.000 ppm Span Gas 5000.000 ppm Current Range Range 1 Applied Gas Sample gas 6.
Emerson Process Management GmbH & Co. OHG 6-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Open a submenu to see detailed, channel specic calibration results information 6-14 6.2.2 Control Menu 6.2.2.3.4 Calibration Results Control.
Emerson Process Management GmbH & Co. OHG 6-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.2.4 Calibration Results Single 6.2.2 Control Menu Control.. ... ... Calibration Results Single... Calibration Results Single Zero Result Success Zero Date ---- Span Result Success Span Date ---- Calibr .
Emerson Process Management GmbH & Co. OHG 6-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.2.4.1 Calibration Deviations Control.. ... Calibration Results Single.. Deviations.. Deviations ZeroDev . 0.000 ppm ZeroDev . T otal 0.
Emerson Process Management GmbH & Co. OHG 6-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Apply gas Applied Gas: SampleGas Flow 1.00 l/min Concentration 25.
Emerson Process Management GmbH & Co. OHG 6-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.2.6 Acknowledgements Menu 6.2.2 Control Menu This submenu provides function lines to acknowledge status messages and alarms, separately (lines 1 to 5) or simultaneously (last line).
Emerson Process Management GmbH & Co. OHG 6-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Ranges Current Range Range1 Range Start 0.000 ppm Range End 100000.000 ppm Concentration 25000.000 ppm 6.2.2.7 Ranges Menu 6.2.2 Control Menu Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be congured.
Emerson Process Management GmbH & Co. OHG 6-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.2.8 Data Logger 6.2.2 Control Menu Control.
Emerson Process Management GmbH & Co. OHG 6-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.2 Control Menu 6.2.2.9 Event/Calibration Logger Control.
Emerson Process Management GmbH & Co. OHG 6-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Setup 2of2 Operation Hours Meter .. Identication.. T ime.. USB Interface.. Data Logger .. Event Logger .. PLC.. Calculator .. Setup 1of2 Display .
Emerson Process Management GmbH & Co. OHG 6-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.1 Display Setup Menu 6.2.3 Setup Menu Congure how measurement results are dis- played 6-.
Emerson Process Management GmbH & Co. OHG 6-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Contrast Default! Increase! Decrease! Contrast 148 6.2.3 Setup Menu P r e s s enter t o r e s e t t o t h e d e f au l t v a l ue (148).
Emerson Process Management GmbH & Co. OHG 6-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Measurements Component.. T emperature.. Pressure.
Emerson Process Management GmbH & Co. OHG 6-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 10.0000 ppm Input CO 10.0000 ppm Output CO Flow 1 0.00 l/min Specify how the measur ed gas concen tration values are displayed. Component Unit.
Emerson Process Management GmbH & Co. OHG 6-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.1.2.1.1 Component Unit Setup Menu Setup.. Display .. Measurements.. Component.. Unit.. Ch1 Component Unit Unit: ppm Unit T ext: ppm Span Gas Unit: ppm Span Unit T ext: ppm Custom Factor: 1.
Emerson Process Management GmbH & Co. OHG 6-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.1.2.2 Display T emperature Setup Menu 6.2.3 Setup Menu Setup.. Display .. Measurements.. T emperature.. T emperature Unit Unit: °C Precision: 1 DSP-T1 30.
Emerson Process Management GmbH & Co. OHG 6-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu Select the ow unit to be used for all mea- surements. Available options: l/min, l/h, ml/min, gal/min Note! 1 gal = 1 US.liq.gal.
Emerson Process Management GmbH & Co. OHG 6-29 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.1.3 Measurement Display Setup Menu 6.
Emerson Process Management GmbH & Co. OHG 6-30 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.1.3.1 Setup Measurement Display Labels Setup.. Display .. Measurement Display .. Labels.. For each MEASUREMENT DISPLA Y line you may enter an individual text, called "label".
Emerson Process Management GmbH & Co. OHG 6-31 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Ch1 Concentration LoLo alarm: Off Lo alarm: Off Hi alarm: Off HiHi alarm: Off Concentration 5.000 ppm Input 0.000 ppm CO Output 0.000 ppm CO 0.
Emerson Process Management GmbH & Co. OHG 6-32 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Menu access Restrict Level1: Off Code Level1: 00000001 Restrict Level2: Off Code Level2: 00000002 Restrict Level3: Off Code Level3: 00000003 Activate: On Home 6.
Emerson Process Management GmbH & Co. OHG 6-33 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Ch1 Calibration Gases.. T olerances.
Emerson Process Management GmbH & Co. OHG 6-34 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Ch1 Gases Zero Gas: 0.000 ppm Span Gas: 50000.000 ppm Range Gases.. Current Range: Range 1 6.2.3 Setup Menu 6.2.3.2.1 Setup Calibration Gases 6.2.3.
Emerson Process Management GmbH & Co. OHG 6-35 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Ch2 T olerances DeviatT oler .: Off Zero Limit: 20.
Emerson Process Management GmbH & Co. OHG 6-36 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Ch2 Procedure Purge T ime: 10 s Max. T ime: 120 s Zero Ranges: T ogether Span Ranges Separately Zero Method: Stability Span Method: Instant T est Mode: No 6.
Emerson Process Management GmbH & Co. OHG 6-37 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.2.4 Setup Calibration V alves 6.2.3 Setup Menu If the system is setup accordingly , the access code for level 3 must be entered to gain ac- cess to this menu.
Emerson Process Management GmbH & Co. OHG 6-38 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Multi-channel unit: Press left to enter SELECT COMPONENT , to change the settings for another channel.
Emerson Process Management GmbH & Co. OHG 6-39 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.2.5 Setup Calibration Program Sequence 6.2.3 Setup Menu This menu with 8 pages allows to setup a se- quences of up to 30 actions (steps), to carry out individual calibration procedures.
Emerson Process Management GmbH & Co. OHG 6-40 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.2.6 Setup Calibration Interval Time 6.2.3 Setup Menu Sele ct th e pro cedur e(s) you wan t to congur e to be carried out on a regular (interval time) basis.
Emerson Process Management GmbH & Co. OHG 6-41 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Start ... Month: 1 Day: 1 Hour: 10 Minute: 0 Set! Next 6/23/09 10:00 6.
Emerson Process Management GmbH & Co. OHG 6-42 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.2.7 Setup Calibration Deviations Setup.. Calibration.. Deviations.. Ch2 Deviations ZeroDev 5.000 ppm ZeroDev T otal 7.000 ppm Zero Deviation Reset! SpanDev 100.
Emerson Process Management GmbH & Co. OHG 6-43 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.3 Setup Measurement 6.2.3 Setup Menu Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be congured.
Emerson Process Management GmbH & Co. OHG 6-44 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Ch1 Ranges Current Range: Range1 Range Start: 0.000 ppm Range End: 50000.000 ppm Starts & Ends.. Range Control: Manual Auto Ranging.. 6.2.3.3.1 Setup Measurement Ranges 6.
Emerson Process Management GmbH & Co. OHG 6-45 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.3.1.1 Measurement Ranges Starts & Ends 6.2.3 Setup Menu Select the range to be congured, and set start and end concentrations.
Emerson Process Management GmbH & Co. OHG 6-46 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.3.1.2.1 Autoranging Switchover Levels 6.2.3 Setup Menu Specify individual switchover levels, instead of using one single hysteresis value for all ranges.
Emerson Process Management GmbH & Co. OHG 6-47 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Ch1 Damping t90 Range1: 2.0 s t90 Range2: 2.0 s t90 Range3: 2.0 s t90 Range4: 2.0 s t90 Current 2.0 s Current Range Ch1-R1 t90 T ime Max 76.
Emerson Process Management GmbH & Co. OHG 6-48 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Ch1 Linearization Linearizer: Off LinearMethod: Splines Calculate! Setpoints (X).. Actuals (Y).. Linearizer Min 20.000 ppm Linearizer Max 1 10.000 ppm Status Normal 6.
Emerson Process Management GmbH & Co. OHG 6-49 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu Submenu to enter coefcients ( ). Select the currently to be used range. Currently measured gas concentration Separately switch On or Off the Linearizat ion for each range of the selected channel.
Emerson Process Management GmbH & Co. OHG 6-50 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.3.3.1 Setup Linearization Setpoints (X) Ch1 Setpoints (X) 2of4 Lin X9: 0.000 ppm Lin X10 0.000 ppm Lin X1 1: 0.000 ppm Lin X12: 0.
Emerson Process Management GmbH & Co. OHG 6-51 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.3.3.2 Setup Linearization Actuals (Y) Ch1 Actuals (Y) 2of4 Lin Y9: 0.000 ppm Lin Y10 0.000 ppm Lin Y1 1: 0.
Emerson Process Management GmbH & Co. OHG 6-52 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu Assign polynomials to each range of the current channel. Multiple assignments are supported. Submenus to enter polynomials coefcients; .
Emerson Process Management GmbH & Co. OHG 6-53 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.3.3.3.1 Enter Polynomials Coefcients Overow: 10.
Emerson Process Management GmbH & Co. OHG 6-54 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.3.3.3.2 Calculate Polynomials Ch1 LinearSetpoints.
Emerson Process Management GmbH & Co. OHG 6-55 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.3.3.3.2.
Emerson Process Management GmbH & Co. OHG 6-56 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.3.4 Setup Cross Interference 6.2.3 Setup Menu Setup.. Measurement.. Cross Interference.. Ch1 Cross Interference Activated: Off IF Source1.. IF Source2.
Emerson Process Management GmbH & Co. OHG 6-57 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.3.4.1 Setup Cross Interference Source n 6.
Emerson Process Management GmbH & Co. OHG 6-58 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.3.4.1.1 Setup Cross Interference Linearization Curve Setup.. Measurement.. Cross Interference.. IF Source 1 ... 4 Linearization Curve.
Emerson Process Management GmbH & Co. OHG 6-59 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.3.5 Setup Measurement A verage 6.2.3 Setup Menu In this line specify the averaging time. Accepted values: 0 ... 120 min Elapsed time for the next average.
Emerson Process Management GmbH & Co. OHG 6-60 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Ch1 Delay Delay T ime:: 2.0 s Delay T ime Max 98.
Emerson Process Management GmbH & Co. OHG 6-61 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Ch1 Pressure compensation Manual Pressure: 1013 hPa Pressure 1013 hPa Pressure Status Good 6.2.3.3.7 Setup Pressure Compensation 6.
Emerson Process Management GmbH & Co. OHG 6-62 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 In-/Outputs Analog Outputs.. Digital Outputs.. Digital Inputs.
Emerson Process Management GmbH & Co. OHG 6-63 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.4.1 Setup Analog Outputs 6.2.3 Setup Menu If the system is setup accordingly , the access code for level 3 must be entered to gain ac- cess to this menu.
Emerson Process Management GmbH & Co. OHG 6-64 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.4.1.1 Setup Analog Output n 6.2.3 Setup Menu " Signal ” species the value associated with the selected output.
Emerson Process Management GmbH & Co. OHG 6-65 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Signal: Comp1 OutRange: 0-20 mA Low Scale: 0.
Emerson Process Management GmbH & Co. OHG 6-66 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu Output signal, if Column A B C D E F G "OutRange" "FailMode" Failure signal level acc.
Emerson Process Management GmbH & Co. OHG 6-67 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Signal: Comp1 OutRange: 4-20 mA Low Scale: 0.00 Max Scale: 100.00 AutoScale: Y es FailMode: LOW - 10% 0/4 mA: 0.00 20 mA: 100.00 Hold: No 6.
Emerson Process Management GmbH & Co. OHG 6-68 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Digital Outputs (X1) Output1 Node: System Output1 Signal: Off Output2 Node: Ch1 Output2 Signal: Off Output3 Node: Ch2 Output3 Signal: Off Output4 Node: Ch3 Output4 Signal: Off 6.
Emerson Process Management GmbH & Co. OHG 6-69 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu Node: System (related to analyzer) Option Description Off Switc.
Emerson Process Management GmbH & Co. OHG 6-70 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu Digital Outputs (X4.1) 1of3 Output5 Node: System Output5 Signal: Off Output6 Node: System Output6 Signal: Off Output7 Node: System Output7 Signal: Off Digital Outputs (X4.
Emerson Process Management GmbH & Co. OHG 6-71 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.4.3 Setup Digital Inputs Setup.
Emerson Process Management GmbH & Co. OHG 6-72 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu Node: System Input n Function Option Description None Not used ZeroCalAll Carry .
Emerson Process Management GmbH & Co. OHG 6-73 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.4.4 Setup Internal SHS 6.
Emerson Process Management GmbH & Co. OHG 6-74 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.4.5 Setup Analog Inputs 6.2.3 Setup Menu Setup.. In-/Outputs.. Analog Inputs.. If the system is setup accordingly , the access code for level 3 must be entered to gain ac- cess to this menu.
Emerson Process Management GmbH & Co. OHG 6-75 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.4.5.1 Setup Analog Input n 6.2.3 Setup Menu Setup.. In-/Outputs.. Analog Inputs.. Analog Input 1 ... 2 Analog Input1 Max. Good V alue: 800 Min.
Emerson Process Management GmbH & Co. OHG 6-76 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Adjust Conversion Input1 Mode: 4..20mA ADC Output 8388608 Input Normalized to 0...1 Coeff a0: 1 Coeff a1: 2 Coeff a2: 3 Calc. Input V alue 1013 Status Good Select the type of signal, provided by the external source.
Emerson Process Management GmbH & Co. OHG 6-77 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.5 Setup Communication Setup.
Emerson Process Management GmbH & Co. OHG 6-78 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Serial Protocol: Modbus-RTU 32Bit Mode: 16BitLow Mbus ID: 1 Baud Rate: 19200 Parity: Even 6.2.3.5.1 Setup Communication Serial Setup.. Communication.
Emerson Process Management GmbH & Co. OHG 6-79 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.5.2 Setup Communication Ethernet n Setup.. Communication.. Ethernet 1...2 Ethernet1 MAC 123456789 IP: 123.456.
Emerson Process Management GmbH & Co. OHG 6-80 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.6 Setup Alarms Setup.. Alarms.. Alarms Alarms Output Failsafe: Y es Concentration.. Conc Average.. T emperature.. Pressure.. Flow .
Emerson Process Management GmbH & Co. OHG 6-81 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.6.1 Setup Alarms Concentrations Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be setup.
Emerson Process Management GmbH & Co. OHG 6-82 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.6.1.1 View Concentration Alarms States This menu gives an overview of activated alarms, based on the currently measured " Concentration ".
Emerson Process Management GmbH & Co. OHG 6-83 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.6.2 Setup Concentration A verage Alarms Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be setup.
Emerson Process Management GmbH & Co. OHG 6-84 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.6.2.1 Setup Alarms Conc Average States This menu gives an overview of activated alarms, based on the currently measured " Average " of concentration.
Emerson Process Management GmbH & Co. OHG 6-85 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3.6.3 Setup T emperature Alarms 6.2.3.6.4 Setup Pressure Alarms 6.2.3.6.5 Setup Flow Alarms Setup.. Alarms.. T emperature.. Setup.
Emerson Process Management GmbH & Co. OHG 6-86 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.6.6 Setup Alarms Calculator n Specify up to 4 threshold levels: " LoLo " and " Lo " levels are to be setup below the expected calculator result range.
Emerson Process Management GmbH & Co. OHG 6-87 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.6.6.1 Setup Alarms Calculator n States This menu gives an overview of activated alarms, based on the currently calculated " Result n" (here of Calculator A).
Emerson Process Management GmbH & Co. OHG 6-88 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.7 Setup Installed Options Some software features are optional and can be unlocked with a license code.
Emerson Process Management GmbH & Co. OHG 6-89 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus Setup.. Installed Options.. Licenses.. 6.2.3 Setup Menu 6.2.3.7.1 Setup Installed Options Licenses This menu is used to unlock software fea- tures, to be purchased separately .
Emerson Process Management GmbH & Co. OHG 6-90 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Setup.. Installed Options.. Flow .. 6.2.3 Setup Menu 6.2.3.7.2 Setup Installed Options Flow Ch1 Flow Flow Source: XSP F1 Flow 1.00 l/min SensorMin.: 0.
Emerson Process Management GmbH & Co. OHG 6-91 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu Setup.. Installed Options.
Emerson Process Management GmbH & Co. OHG 6-92 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.8 Setup Save-Load Setup..
Emerson Process Management GmbH & Co. OHG 6-93 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.8.1 Notes on Save-Load Procedures While a backup or restore procedure is on- going, an information screen appears, as shown to the left: W ait until " Progress (0.
Emerson Process Management GmbH & Co. OHG 6-94 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.8.2 Save-Load Local Backup Setup.. Save-Load.. Local Backup.. Local Backup Save.. UsrBack Date 7/29/09 14:26 Restore.. Undo Restore! Busy 0 Progress (0.
Emerson Process Management GmbH & Co. OHG 6-95 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus This menu enables to save or restore the current analyzer configuration to/from an external USB device. Consider the notes on 6-93 ! 6.
Emerson Process Management GmbH & Co. OHG 6-96 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu Firmware is the analyzer´s basic operation software. This menu enables to update your current analyzer rmware from an external USB device, e.
Emerson Process Management GmbH & Co. OHG 6-97 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.9 Setup Operation Hours Meter Ch1 Operation Hours Meter MaintRequInterval: 26000 h Hrs of Operation 145 h Reset Hours! Setup.
Emerson Process Management GmbH & Co. OHG 6-98 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.10 Setup Identication Identication System T ag: Device tag Plant Name: Plant name Customer: Company name Component T ags.
Emerson Process Management GmbH & Co. OHG 6-99 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.10.1 Component T ag Setup Menu Setup.
Emerson Process Management GmbH & Co. OHG 6-100 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.1 1 Setup Time If the system is setup accordingly , the access code for level 3 must be entered to gain ac- cess to this menu.
Emerson Process Management GmbH & Co. OHG 6- 101 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.1 1.1 Setup NTP Server The last line show s the current analyzer time.
Emerson Process Management GmbH & Co. OHG 6-102 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3.1 1.2 Setup Manual Time The last line shows the current analyzer time. 6.2.3 Setup Menu Use this menu page to manually set analyzer date and time.
Emerson Process Management GmbH & Co. OHG 6- 103 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus USB stick memory information (if a device is connected). Specify the usage limit for the USB stick, to give a warning. 6.2.3 Setup Menu Setup.
Emerson Process Management GmbH & Co. OHG 6-104 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Fig. 6-5: USB File System Structure 6.2.3 Setup Menu Setup.. USB interface.. Format USB stick... 6.2.3.12.1 Format USB Stick Format USB stick and erase all existing data! Are you sure? No! Y es! Select "Y es!" to start formatting.
Emerson Process Management GmbH & Co. OHG 6- 105 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.13 Setup Data Logger If the system is setup accordingly , the access code for level 3 must be entered to gain ac- cess to this menu.
Emerson Process Management GmbH & Co. OHG 6-106 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.3 Setup Menu 6.2.3.13.1 Setup Data Logger Export Menu lines 1 ... 4: Specify which data to be exported. Available options: Y es, No Select the eld separator , separating the dif- ferent data columns in the exported text le.
Emerson Process Management GmbH & Co. OHG 6- 107 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.3 Setup Menu 6.2.3.14 Setup Event Logger Note! This menu is available only , if a valid soft- ware upgrade code has been purchased and entered ( 6-89 ).
Emerson Process Management GmbH & Co. OHG 6-108 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4 Status Menu Status.. Failures.. OffSpecs.. Maintenance Requests.. Function Checks.. Measurement.. Calibration.. Alarms.. Operation Hours Meter .
Emerson Process Management GmbH & Co. OHG 6- 109 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.1 Status Menu Failures Status.. Failures.. Up to 3 menu pages are prepared to show status messages of type 'Failure'.
Emerson Process Management GmbH & Co. OHG 6-1 10 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4.3 Status Menu Maintenance Requests Status.. Maintenance Requests.. Up to 3 menu pages are prepared to show status messages of type 'Maintenance re- quests'.
Emerson Process Management GmbH & Co. OHG 6-1 1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.5 Status Menu Measurement Status.. Measurement.. Measurement Component.. T emperature Sensors.. Pressure Sensors.
Emerson Process Management GmbH & Co. OHG 6-1 12 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4.5.1 Status Menu Component Multi-channel unit: In SELECT COMPONENT , select the chan- nel to be viewed. Multi-channel unit: Press left to enter SELECT COMPONENT , to view the status for another channel.
Emerson Process Management GmbH & Co. OHG 6-1 13 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.5.1.1 Status Menu Component Statistics Status.. Measurement.. Component.. Statistics.. Ch1 Statistics MinConc 0.
Emerson Process Management GmbH & Co. OHG 6-1 14 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4.5.1.2 Status Menu Secondary V ariables 6.2.4.5.2 Status Menu T emperature Sensors Status.. Measurement.. Component.. Secondary V ariables.
Emerson Process Management GmbH & Co. OHG 6-1 15 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.5.3 Status Menu Pressure Sensors 6.2.4.5.4 Status Menu Flow Sensors Status.. Measurement.. Pressure Sensors.
Emerson Process Management GmbH & Co. OHG 6-1 16 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4.6 Status Menu Calibration Status.. Calibration.. Status.. Calibration.. Component.. Ch1 Single Calibration Status.. Results.
Emerson Process Management GmbH & Co. OHG 6-1 17 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.6.1.1 Calibration Status Single Menu Status.. Calibration.. Single Calibration.. Results... This page provides calibration results for the selected channel.
Emerson Process Management GmbH & Co. OHG 6-1 18 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4.6.2 Next Automatic Calibrations Menu 6.2.4.6.1.2.1 Calibration Results Single Deviations Status.. Single Calibration.. Results.
Emerson Process Management GmbH & Co. OHG 6-1 19 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.7 Status Menu Alarms Status.. Alarms.. This menu lets you select from several alarm functions, to view detailed status informati - on.
Emerson Process Management GmbH & Co. OHG 6-120 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.4 Status Menu 6.2.4.7.1 Alarms Status Details Status.. Alarms.. ... All alarm status menus, accessible from ST A TUS - ALARMS ( previous page), are designed in a similiar way to provide the information.
Emerson Process Management GmbH & Co. OHG 6- 121 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.4 Status Menu 6.2.4.7.2 Operation Hours Status Status.
Emerson Process Management GmbH & Co. OHG 6-122 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.5 Info Menu 6.2.5 Info Menu Info.. Info Firmware 1.0 XSP V ersion 1.0 Serial no 123456789 Components.. Installed Options.. Ethernet1 IP 192.168.
Emerson Process Management GmbH & Co. OHG 6- 123 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus See below for the measurement info menu 6.2.5 Info Menu 6.2.5.1 Info Menu Components Info.. Components.. Components Channel1 Enabled Channel2 Enabled Channel3 Enabled Channel4 Disabled Channel5 Disabled Measurement.
Emerson Process Management GmbH & Co. OHG 6-124 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.5 Info Menu 6.2.5.2 Info Menu Installed Options Info.. Installed Options.. Installed Options Package None V alves None Pump None DIO#1 Installed Y es DIO#2 Installed No Anal.
Emerson Process Management GmbH & Co. OHG 6- 125 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6 Software Menus 6.2.5 Info Menu 6.2.5.3 Info Menu Identication Info.. Identication.. Identication System T ag My T ag Plant Name My Plant Customer Me Component T ags.
Emerson Process Management GmbH & Co. OHG 6-126 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 6.2.6 Service Menu 6.2.6 Service Menu Service.. Service Europe.. North America.. Latin America.. Asia-Pacic.. Factory Setup.. Europe Emerson Process Management GmbH & Co.
Emerson Process Management GmbH & Co. OHG 7-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures Chapter 7 Maintenance and Other Procedures This chapter gives instructions not only for maint enance procedures, but als o covers se- ver al proc edu res usef ul for p rop erl y op era tin g the instruments.
Emerson Process Management GmbH & Co. OHG 7-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.2 General Maintenance Information 7.2 General Maintenance Information Visual Inspections Compone.
Emerson Process Management GmbH & Co. OHG 7-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.2 General Maintenance Information T ests Component Interval T ubi.
Emerson Process Management GmbH & Co. OHG 7-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.3 Performing a Leak T est 7.3 Performing a Leak T est Ma x.
Emerson Process Management GmbH & Co. OHG 7-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4 Calibration Procedures 7.4 Calibration Procedures Note! T o achieve best and proper measuring re- sults, it is recommended to perform zero and span calibrations on a regular weekly basis.
Emerson Process Management GmbH & Co. OHG 7-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 Before starting any calibration take care of the table below , and the following sections, describing general preparations for calibra- tion procedures and how to perform such calibrations! 7.
Emerson Process Management GmbH & Co. OHG 7-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures Gases Zero gas: 0.000 ppm Span gas: 50000.000 ppm Range gases.. Current range: Range 1 7.4.1 Preparing Calibrations 7.
Emerson Process Management GmbH & Co. OHG 7-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.1 Preparing Calibrations Example: Measuring range: 0 ... 50 % Zero gas: 0 % Span gas: 50 % T olerance limits: 20.0 % (see gure above ) Situation: Due to a fault zero gas is supplied to carry out a span calibration, instead of span gas .
Emerson Process Management GmbH & Co. OHG 7-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures Analog outputs Output1.. Output2.. Output3.. Output4.. Output5.. Signal: 0 Out range: 0-20 mA LowScale: 0.00 MaxScale: 100.
Emerson Process Management GmbH & Co. OHG 7-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 Fig. 7-2: Calibration Improvement by V ariable V alve Assignments 7.
Emerson Process Management GmbH & Co. OHG 7-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.1 Preparing a Calibration Before starting to assign valves to gases and channels, you need to check if valves are supported: Open SETUP - INST ALLED OPTIONS and check the "V alves: " line.
Emerson Process Management GmbH & Co. OHG 7-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.1 Preparing a Calibration 7.4.1.1.1 Internal V alve Assignment If your analyzer provides inte.
Emerson Process Management GmbH & Co. OHG 7-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.1 Preparing a Calibration 7.
Emerson Process Management GmbH & Co. OHG 7-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.1 Preparing a Calibration The next step is to assign the valves to the channels: Continue with 7-15.
Emerson Process Management GmbH & Co. OHG 7-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.1 Preparing a Calibration 7.4.1.1.3 Calibration V alve Assignment For each channel a valve has to be assigned zero gas valve or span gas valve, wherea t the valves can be freely assig ned to any channel .
Emerson Process Management GmbH & Co. OHG 7-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.1 Preparing a Calibration Now open the next menu to assign up to 4 span gas valves to the selected channel: one for each range.
Emerson Process Management GmbH & Co. OHG 7-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.2 Manual Calibration 7.4.2 Manual Calibration 7.4.2.1 Manual Zero Calibration Startin g from the MEAS UREMENT SCREEN press dow n to open the MAIN MENU and enter CONTROL.
Emerson Process Management GmbH & Co. OHG 7-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.2 Manual Calibration The next lines show • the calibration gas setup (here: required zero gas concentration is 0.000 ppm), • the currently measured gas concentration • and the current gas ow .
Emerson Process Management GmbH & Co. OHG 7-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.2 Manual Calibration When nis hed, press lef t several tim .
Emerson Process Management GmbH & Co. OHG 7-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.3 Advanced Calibration 7.4.3 Advanced Calibration For a description of how to perform all cha.
Emerson Process Management GmbH & Co. OHG 7-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.3 Advanced Calibration 7.
Emerson Process Management GmbH & Co. OHG 7-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.3 Advanced Calibration The analyzer immediately begins zero calibration(s), showing the CALIBRA TION ST A TUS SUMMARY screen.
Emerson Process Management GmbH & Co. OHG 7-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.3 Advanced Calibration start to zero all channels with the current zero gas valve assigned, conside- ring the individual purge times select channel 1 increase channel no.
Emerson Process Management GmbH & Co. OHG 7-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.3.2 Span All Calibrations 7.4.3 Advanced Calibration Before selecting any further line make sure the required calibra- tion gas is applied! Supply all calibration gases with the same ow as the sample gas (re com med ed a pp rox .
Emerson Process Management GmbH & Co. OHG 7-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.3 Advanced Calibration The analyzer immediately begins span calibration(s), showing the CALIBRA TION ST A TUS SUMMARY screen.
Emerson Process Management GmbH & Co. OHG 7-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.3 Advanced Calibration Fig. 7-5: Span All Calibration Procedure Flow Diagram start to span all chan- nels with the cur- rent span gas valve assigned, conside- ring the individual purge times select channel 1 increase channel no.
Emerson Process Management GmbH & Co. OHG 7-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.3.3 Zero&Span All Calibration 7.
Emerson Process Management GmbH & Co. OHG 7-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.3 Advanced Calibration Fig. 7-6: Zero&Span All Calibration Procedure Flow Diagram span all channels with the current span gas valve assigned select channel 1 increase channel no.
Emerson Process Management GmbH & Co. OHG 7-29 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.3 Advanced Calibration The a nalyze r imme diatel y begi ns to calibrate , showing the CALIBRA TION ST A TUS SUM- MARY screen.
Emerson Process Management GmbH & Co. OHG 7-30 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.3 Advanced Calibration 7.4.3.4 Notes on Span Calibrating Channels With Multiple Ranges X-STREAM XE series gas analyzers sup- port up to 4 ranges per measuring channel ( 6-44).
Emerson Process Management GmbH & Co. OHG 7-31 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures Advanced calibration 1of2 Cancel! Zero&span single.. Zero all! Span all! Zero&span all! Programmed sequence! Blowback! 7.
Emerson Process Management GmbH & Co. OHG 7-32 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.4 Remote Calibration Remote calibrations may be initialized by di- gital inputs or Modbus com.
Emerson Process Management GmbH & Co. OHG 7-33 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.4.1 Calibrations Initialized by Digital Inputs 7.
Emerson Process Management GmbH & Co. OHG 7-34 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.4 Remote Calibration Fig. 7-7: Digital Inputs - Examples of Sequences Cancel Calibration Span.
Emerson Process Management GmbH & Co. OHG 7-35 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.4.2 Modbus Activated Calibrations Without V alves 7.4.4 Remote Calibration Several Modbus commands allow to start calibrations ( Chapter 9, List of Modbus Commands).
Emerson Process Management GmbH & Co. OHG 7-36 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 Before selecting any further line make sure the required calibra- tio n ga ses are app lie d, and va l- ves are assigned properly! Supply all calibration gases with the same ow as the sample gas (recommended approx.
Emerson Process Management GmbH & Co. OHG 7-37 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.5 Unattended Automatic Calibration Within SETUP - CALIBRA TION, " Interval time.." opens the following screen: Several time intervals may be specied: "Zero all.
Emerson Process Management GmbH & Co. OHG 7-38 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.5 Unattended Automatic Calibration All submenus opened by above menu lines ha ve the sa me co.
Emerson Process Management GmbH & Co. OHG 7-39 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.4.6 V erifying a Calibration 7.4.6 V erifying a Calibration Startin g from the MEAS UREMENT SCREEN press dow n to open the MAIN MENU and enter CONTROL.
Emerson Process Management GmbH & Co. OHG 7-40 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.4.7 Cancelling an Ongoing Calibration Any menu, from where a calibration can be started, shows a line "Cancel!" (see example to the left).
Emerson Process Management GmbH & Co. OHG 7-41 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.5 Replacing the Electrochemical Sensor 7.5 Replacing the Electrochemical Sensor In consequence of its design the sensor‘s lifetime is limited and depends on theoretical designed life and Oxygen concentration.
Emerson Process Management GmbH & Co. OHG 7-42 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.5 Replacing the Electrochemical Sensor ELECTRICAL SHOCK HAZARD W orking at opened an d powere d.
Emerson Process Management GmbH & Co. OHG 7-43 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.5 Replacing the Electrochemical Sensor HAZARD FROM WEAK ACID AQU.
Emerson Process Management GmbH & Co. OHG 7-44 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.5 Replacing the Electrochemical Sensor 7.5.1 General Hints on Handling the Sensor Do not expose the sensor to a temperature other than the temperature range of -20 to +60‘C (-4 to +140 F).
Emerson Process Management GmbH & Co. OHG 7-45 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.5 Replacing the Electrochemical Sensor 7.5.2 Opening X-STREAM Analyzers Fig. 7-9: X-STREAM XEGP Fig. 7-10: X-STREAM XEGC 7.
Emerson Process Management GmbH & Co. OHG 7-46 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.5 Replacing the Electrochemical Sensor locking device 7.5.2.3 How to Open X-STREAM XEF / XDF T o open a X-STREAM XEFD loosen the 20 screws located at the instrument´s ange.
Emerson Process Management GmbH & Co. OHG 7-47 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.5 Replacing the Electrochemical Sensor 7.
Emerson Process Management GmbH & Co. OHG 7-48 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.5 Replacing the Electrochemical Sensor 7.5.4 Disassembling the Sensor Unit The sensor unit consists of a holder , an elec- tr oni cs bo ard an d the sens or it se lf, al l toge the r installed on a base plate (Fig.
Emerson Process Management GmbH & Co. OHG 7-49 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.5 Replacing the Electrochemical Sensor 7.5.5 Adjusting the Output Signal Strip P3 for sensor connection Potentiometer R4 Tp 1 Tp 2 Fig.
Emerson Process Management GmbH & Co. OHG 7-50 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 • Disconnect the analyzer from power • Re-in stall the senso r unit into th e anal yzer • Close the housing.
Emerson Process Management GmbH & Co. OHG 7-51 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.6 Cleaning the Instrument´s Outside 7.6 Cleaning the Instrument´s Outside Use a liquid general purpose detergent and a lint-free cloth for cleaning the analyzer´s outside.
Emerson Process Management GmbH & Co. OHG 7-52 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.7 Save / Restore Conguration Data Sets 7.7 Save / Restore Conguration Data Sets After som.
Emerson Process Management GmbH & Co. OHG 7-53 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.7 Save / Restore Conguration Data Sets Fig.
Emerson Process Management GmbH & Co. OHG 7-54 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.7.1 Local Backup - Save 7.7 Save / Restore Conguration Data Sets Starting at the MEASUREMENT SCREEN press down to open the MAIN MENU, enter SETUP and next SA VE-LOAD.
Emerson Process Management GmbH & Co. OHG 7-55 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.7.2 Local Backup - Restore 7.7 Save / Restore Conguration Data Sets Starting at the MEASUREMENT SCREEN press down to open the MAIN MENU, enter SETUP and next SA VE-LOAD.
Emerson Process Management GmbH & Co. OHG 7-56 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.7.3 Factory Defaults - Restore 7.7 Save / Restore Conguration Data Sets Starting at the MEASUREMENT SCREEN press down to open the MAIN MENU, enter SETUP and next SA VE-LOAD.
Emerson Process Management GmbH & Co. OHG 7-57 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.7.4 USB Backup - Save 7.7 Save / Restore Conguration Data Sets IMPORT ANT INFORMA TION! Read carefully before activating USB procedures! The analyzer provides a dual-mode USB 1.
Emerson Process Management GmbH & Co. OHG 7-58 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.7 Save / Restore Conguration Data Sets Starting at the MEASUREMENT SCREEN press down to open the MAIN MENU, enter SETUP and next SA VE-LOAD. Highlight "USB backup.
Emerson Process Management GmbH & Co. OHG 7-59 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.7 Save / Restore Conguration Data Sets The backup les are stored within the USB device' le structure, in a subdirectory 'con- g'.
Emerson Process Management GmbH & Co. OHG 7-60 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.7.5 USB Backup - Restore 7.7 Save / Restore Conguration Data Sets St art ing fr om the MEA SUR EME NT SCR EEN , press down to open the MAIN MENU, enter SETUP and next SA VE-LOAD.
Emerson Process Management GmbH & Co. OHG 7-61 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.7.6 Undo Restore 7.
Emerson Process Management GmbH & Co. OHG 7-62 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 Data logger Logging: Off Sample time: 1 s Data logger data delete! Cached entries 14 T otal entries 0 Data Selection Export data to USB! 7.8 Logles 7.
Emerson Process Management GmbH & Co. OHG 7-63 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures The last line " Export data to USB! " enables to expo rt t he t otal ent rie s to a con nec ted USB device.
Emerson Process Management GmbH & Co. OHG 7-64 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 Fig. 7-17: Subdirectory for Log Files The li ne " Ex por t data to U SB! " e nab les to ex por t the total entries to a connected USB device.
Emerson Process Management GmbH & Co. OHG 7-65 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures Example Imported into a text le, for a 3 channel in- strument the above settings would give the following log le layout: Imported into a spreadsheet software, it looks like this: Fig.
Emerson Process Management GmbH & Co. OHG 7-66 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.9 Files on USB Stick 7.9 Files on USB Memory Device 7.9.1 autorun.inf Aft er conne ctin g or fo rmat tin g an USB dev ice , or after a rst log le export, a special le structure is present on the stick, gure below .
Emerson Process Management GmbH & Co. OHG 7-67 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.9 Files on USB Stick 7.9.2 xe_win_tools.zip This ZIP contains some les to be used with a Microsoft Windows based computer only .
Emerson Process Management GmbH & Co. OHG 7-68 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7.10 Web Browser 7.10 W eb Browser IP address for Ethernet1 connector Info Firmware 1.0 DSP version 1.0 Serial no 123456789 Components.. Installed options.
Emerson Process Management GmbH & Co. OHG 7-69 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010 7 Maintenance & Procedures 7.10 Web Browser Connect your computer to the network, open a web .
Emerson Process Management GmbH & Co. OHG 7-70 X-STREAM XE Instruction Manual HASXEE-IM-HS 10/2010.
Emerson Process Management GmbH & Co. OHG 8-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting Chapter 8 T roubleshooting 8.1 Abstract This chapter covers troubleshooting the ana- lyzer: Sectio n 8.
Emerson Process Management GmbH & Co. OHG 8-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.2 Solving Problems Indicated by Status Messages 8.
Emerson Process Management GmbH & Co. OHG 8-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.2.1 Analyzer Related Messages 8.
Emerson Process Management GmbH & Co. OHG 8-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Message Status level Explanation Recommended Actions E-Mail: Not sent Maintenance Failed to send e.
Emerson Process Management GmbH & Co. OHG 8-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting Message Status level Explanation Recommended Actions Factory le read error M.
Emerson Process Management GmbH & Co. OHG 8-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Message Status level Explanation Recommended Actions SCAL blowback Function check Device runs syst.
Emerson Process Management GmbH & Co. OHG 8-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting Message Status level Explanation Recommended Actions USB free space warning Mai.
Emerson Process Management GmbH & Co. OHG 8-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.2.2 Channel Related Messages (preceded by Channel T ag, e.g. CO2.1) Message Status level Description Recommended Actions Concentration Is Higher Than Limit Off-spec Currently the actual con- centration is outside the analyzer's range limits.
Emerson Process Management GmbH & Co. OHG 8-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting Message Status level Description Recommended Actions Flow Low-Low Failure The d.
Emerson Process Management GmbH & Co. OHG 8-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Message Status level Description Recommended Actions Range Underow Off-spec Gas concentration is out of measurement range and the- refore linearization curve does not apply (measuring results are not reliable).
Emerson Process Management GmbH & Co. OHG 8-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting Message Status level Description Recommended Actions Sensor Source + Failure .
Emerson Process Management GmbH & Co. OHG 8-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.3 Solving Problems Not Indicated by Status Messages The following table lists possible faults not det ect able by the ins tru ment ‘s soft ware , gi ves hints on the poten tial cau ses, and tips on how to solve the problems.
Emerson Process Management GmbH & Co. OHG 8-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.3 Solving Problems Not Indicated by Status Messages Situation Description Re.
Emerson Process Management GmbH & Co. OHG 8-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.3 Solving Problems Not Indicated by Status Messages Situation Description Recommended Actions Digital Outputs Not Working Properly (cont.
Emerson Process Management GmbH & Co. OHG 8-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.3 Solving Problems Not Indicated by Status Messages Situation Description Re.
Emerson Process Management GmbH & Co. OHG 8-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.3 Solving Problems Not Indicated by Status Messages Situation Description Recommended Actions F.
Emerson Process Management GmbH & Co. OHG 8-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting Situation Description Recommended Actions No Gas Flow Sample gas pump (option).
Emerson Process Management GmbH & Co. OHG 8-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components This section gives information on how to check and replace internal components.
Emerson Process Management GmbH & Co. OHG 8-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components HAZARD FROM EXPLOSIVE, FLAMMABLE AND HARMFU.
Emerson Process Management GmbH & Co. OHG 8-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components 8.4.1 Opening X-STREAM Analyzers Fig. 8-2: X-STREAM XEGP Fig. 8-3: X-STREAM XEGC 8.4.1.1 How to Open X-STREAM XEGP 8.
Emerson Process Management GmbH & Co. OHG 8-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components EXPLOSION HAZARD Special variations of X-STREAM XEF and XDF . as well as X-STREAM XEFD may be installed in hazardous areas.
Emerson Process Management GmbH & Co. OHG 8-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 Fig. 8-5: XSP - Allocation of Signal Connectors 8.
Emerson Process Management GmbH & Co. OHG 8-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4.3 Sample Pump: Replacement of Diaphragm 8.
Emerson Process Management GmbH & Co. OHG 8-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 1: If applicable: Remove the screws S1 on both sides of the pump. T ake off the cover . Required parts for the spare parts kit for the pump (PN 0375946).
Emerson Process Management GmbH & Co. OHG 8-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 2: Remove the screws S2 and screw S3 .
Emerson Process Management GmbH & Co. OHG 8-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 5: Remove the white block.
Emerson Process Management GmbH & Co. OHG 8-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 6: Remove the teon gasket. Step 7: Remove the remaining two pump parts. Clean the white plate for the gas in- and outlet.
Emerson Process Management GmbH & Co. OHG 8-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 8: Disassemble the lower block and the clamp.
Emerson Process Management GmbH & Co. OHG 8-29 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 9: Remove the two washers on the dia- phragm. Step 10: Replace the old with the new dia- phragm and assemble the washers and the clamp in reverse order (step 9 and 8).
Emerson Process Management GmbH & Co. OHG 8-30 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 1 1: Remove the locking springs on both sides of the white block and take out the old diaphragms on both sides.
Emerson Process Management GmbH & Co. OHG 8-31 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 13: Assemble the pump assy . T ake care of your marker ( step 4) 1. Put the two upper plates under the clamp ( steps 6 & 7 for reference).
Emerson Process Management GmbH & Co. OHG 8-32 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 14: Assemble the pump assy in reverse order . Put it in the pump housing and x it with the screws S2 . Fix the clamp with screw S3 and the black buffer .
Emerson Process Management GmbH & Co. OHG 8-33 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 15: If applicable: Install the cover and x it with screws S1 at both sides. Finally re-install the pump into your analy- zer , to complete the replacement of pump diaphragm.
Emerson Process Management GmbH & Co. OHG 8-34 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components 8.4.4 Paramagnetic Oxygen Cell for Standard Applications: Adjustment of Physical Zero Step 1: The gure to the left shows a heated paramagnetic oxygen cell.
Emerson Process Management GmbH & Co. OHG 8-35 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 5: T ighten the screw S2 with care, close the cover and check the zero point again. Step 4: Carefully loosen the screw S2 .
Emerson Process Management GmbH & Co. OHG 8-36 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 6: Fix the closed cell´s cover with screw S1 .
Emerson Process Management GmbH & Co. OHG 8-37 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components 8.
Emerson Process Management GmbH & Co. OHG 8-38 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 1: Check the solder bridges, located at the solder side of the board, for proper conguration: LB10 open LB4 2-5 closed LB21 1-4 closed LB20 open Step 2: Switch on the analyzer .
Emerson Process Management GmbH & Co. OHG 8-39 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components R60 T est connector P4 P4.15 P4.16 + _ Step 3: Locate test connector P4 to measure the bridge voltage : P4.
Emerson Process Management GmbH & Co. OHG 8-40 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components P1 1/ P17 Step 4: T o adjust the physical zero point : Apply zero gas to the analyzer . Connect the DVM to the following pins: P4.
Emerson Process Management GmbH & Co. OHG 8-41 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8 T roubleshooting 8.4 T roubleshooting on Components Step 5: T o adjust the physical span : Apply span gas to the analyzer . Do not disconnect the DVM: P4.
Emerson Process Management GmbH & Co. OHG 8-42 X-STREAM XE Instruction Manual HASXEE-IM-HS 06/2010 8.4 T roubleshooting on Components Step 7: T o netune the physical zero point : Close solder bridge LB10. Apply zero gas to the analyzer . Do not disconnect the DVM: P4.
Emerson Process Management GmbH & Co. OHG 9-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands Chapter 9 Modbus Functions This chapter lists all Modbus functions and registers supported by X-STREAM gas analyzers. Refer to the www .
Emerson Process Management GmbH & Co. OHG 9-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.2 Supported Functions Modbus Function Function Code Note 1) decimal (hex) ReadCoils 01 (0x01) fo.
Emerson Process Management GmbH & Co. OHG 9-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Control.
Emerson Process Management GmbH & Co. OHG 9-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Control.ApplyGas.Span3V alve2 2067 2067 Boolean R/W 0=open sample valve, 1=open span3 valve comp2 Control.
Emerson Process Management GmbH & Co. OHG 9-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Control.
Emerson Process Management GmbH & Co. OHG 9-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.Measurement.
Emerson Process Management GmbH & Co. OHG 9-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.
Emerson Process Management GmbH & Co. OHG 9-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.Measurement.
Emerson Process Management GmbH & Co. OHG 9-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.
Emerson Process Management GmbH & Co. OHG 9-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.Measurement.
Emerson Process Management GmbH & Co. OHG 9-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.
Emerson Process Management GmbH & Co. OHG 9-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.Measurement.
Emerson Process Management GmbH & Co. OHG 9-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Service.
Emerson Process Management GmbH & Co. OHG 9-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.Calibration.CurrentSpangas3 61 15… 61 16 9058 Float R/W current zero gas of comp3 Setup.
Emerson Process Management GmbH & Co. OHG 9-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.
Emerson Process Management GmbH & Co. OHG 9-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.Calibration.Range4Zerogas4 6251… 6252 9126 Float R/W zero gas of range4 of comp4 Setup.
Emerson Process Management GmbH & Co. OHG 9-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.
Emerson Process Management GmbH & Co. OHG 9-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.Display .MeasDisplay .
Emerson Process Management GmbH & Co. OHG 9-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.
Emerson Process Management GmbH & Co. OHG 9-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.In/Outputs.AO.
Emerson Process Management GmbH & Co. OHG 9-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.
Emerson Process Management GmbH & Co. OHG 9-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.In/Outputs.DO.
Emerson Process Management GmbH & Co. OHG 9-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.
Emerson Process Management GmbH & Co. OHG 9-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.Measurement.StartOfCurrentRange_2 6045… 6046 9023 Float R/W start of current range of comp2 Setup.
Emerson Process Management GmbH & Co. OHG 9-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.
Emerson Process Management GmbH & Co. OHG 9-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Setup.Measurement.XIntf.
Emerson Process Management GmbH & Co. OHG 9-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.3 List of Parameters and Registers - Sorted by T ag Name T ag Name Address Data T ype Client Access Description Modicon Daniel Status.
Emerson Process Management GmbH & Co. OHG 9-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 T ag Name Address Data T ype Client Access Description Modicon Daniel Status.Diagnostics.RawRefConce5 6039… 6040 9020 Float RO raw ADC of reference side component5 Status.
Emerson Process Management GmbH & Co. OHG 9-29 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands T ag Name Address Data T ype Client Access Description Modicon Daniel Status.NamurStates.MaintRequAlarm 5005… 5006 8003 DWord RO Namur Maintenance Request alarm biteld Status.
Emerson Process Management GmbH & Co. OHG 9-30 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 T ag Name Address Data T ype Client Access Description Modicon Daniel Status.Pressure2 6063… 6064 9032 Float RO pressure of comp2 Status.Pressure3 6065… 6066 9033 Float RO pressure of comp3 Status.
Emerson Process Management GmbH & Co. OHG 9-31 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 2001 2001 Control.
Emerson Process Management GmbH & Co. OHG 9-32 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 2068 2068 Control.
Emerson Process Management GmbH & Co. OHG 9-33 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3039 3039 Setup.
Emerson Process Management GmbH & Co. OHG 9-34 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3176 3176 Setup.
Emerson Process Management GmbH & Co. OHG 9-35 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3220 3220 Setup.
Emerson Process Management GmbH & Co. OHG 9-36 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3281 3281 Setup.
Emerson Process Management GmbH & Co. OHG 9-37 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3404 3404 Service.
Emerson Process Management GmbH & Co. OHG 9-38 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3428 3428 Service.
Emerson Process Management GmbH & Co. OHG 9-39 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3509 3509 Service.
Emerson Process Management GmbH & Co. OHG 9-40 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 4027 4027 Service.
Emerson Process Management GmbH & Co. OHG 9-41 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 8027 5053… 5054 Status.
Emerson Process Management GmbH & Co. OHG 9-42 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9006 601 1… 6012 Status.
Emerson Process Management GmbH & Co. OHG 9-43 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9026 6051… 6052 Setup.
Emerson Process Management GmbH & Co. OHG 9-44 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9055 6109… 61 10 Setup.
Emerson Process Management GmbH & Co. OHG 9-45 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9089 6177… 6178 Setup.
Emerson Process Management GmbH & Co. OHG 9-46 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 91 13 6225… 6226 Setup.
Emerson Process Management GmbH & Co. OHG 9-47 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9137 6273… 6274 Setup.
Emerson Process Management GmbH & Co. OHG 9-48 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9161 6321… 6322 Service.
Emerson Process Management GmbH & Co. OHG 9-49 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9187 6373… 6374 Setup.
Emerson Process Management GmbH & Co. OHG 9-50 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 9486 6971… 6972 Service.
Emerson Process Management GmbH & Co. OHG 9-51 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3032… 3035 3032… 3035 Setup.
Emerson Process Management GmbH & Co. OHG 9-52 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9.4 List of Parameters and Registers - Sorted by Daniel Registers Address T ag Name Data T ype Client Access Description Daniel Modicon 3481… 3484 3481… 3484 Setup.
Emerson Process Management GmbH & Co. OHG 9-53 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands Address T ag Name Data T ype Client Access Description Daniel Modicon 8126… 8129 5251… 5258 Service.Status.DeviceStates.Ch- StateInhibit1 DWord R/W Inhibit for comp1‘s state biteld (b0:.
Emerson Process Management GmbH & Co. OHG 9-54 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Address T ag Name Data T ype Client Access Description Daniel Modicon 9249… 9252 6497… 6504 Service.
Emerson Process Management GmbH & Co. OHG 9-55 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 9 Modbus Commands Address T ag Name Data T ype Client Access Description Daniel Modicon 9421… 9424 6841… 6848 Setup.Measurement.XIntf.Signal- V alues5 Float RO Cross interfere signal values1.
Emerson Process Management GmbH & Co. OHG 9-56 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Address T ag Name Data T ype Client Access Description Daniel Modicon 9766… 9770 7531… 7540 Service.Measurement.Lin.Set- 2Coeffs3 Float R/W Lin-Polynom.
Emerson Process Management GmbH & Co. OHG 10-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 10 Service information Chapter 10 Service Information If factory repair of defective equipment is required, proceed as follows: 1 .
Emerson Process Management GmbH & Co. OHG 10-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 10.2 Customer Service For order administration, replacement parts, applicaton assistance, on-site or factory repair , service or maintenance contract information, contact: In Europe: Emerson Process Management GmbH & Co.
Emerson Process Management GmbH & Co. OHG 1 1-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1 1 Dismounting & Disposal Chapter 1 1 Dismounting and Disposal 1 1.
Emerson Process Management GmbH & Co. OHG 1 1-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 1 1 Dismounting & Disposal When the instrument has reached the end of its useful life, When .
Emerson Process Management GmbH & Co. OHG A-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix Appendix This chapter contains an excerpt from the Modbus publication "Modbus_over.
Emerson Process Management GmbH & Co. OHG A-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.1 Modbus Specication A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-7 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-8 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-9 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-10 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-1 1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.1 Modbus Specication.
Emerson Process Management GmbH & Co. OHG A-12 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.2 EC Declaration of Conformity A.2 EC Declaration of Conformity.
Emerson Process Management GmbH & Co. OHG A-13 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.2 EC Declaration of Conformity.
Emerson Process Management GmbH & Co. OHG A-14 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.3 CSA Certicate of Compliance A.3 CSA Certicate of Compliance Certificate of Compliance Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.
Emerson Process Management GmbH & Co. OHG A-15 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.3 CSA Certicate of Compliance Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.
Emerson Process Management GmbH & Co. OHG A-16 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.3 CSA Certicate of Compliance Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.
Emerson Process Management GmbH & Co. OHG A-17 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.3 CSA Certicate of Compliance Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.
Emerson Process Management GmbH & Co. OHG A-18 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.3 CSA Certicate of Compliance Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.
Emerson Process Management GmbH & Co. OHG A-19 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.3 CSA Certicate of Compliance Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.
Emerson Process Management GmbH & Co. OHG A-20 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Certificate: 1714037(LR105173) Master Contract: 185562 Project: 2247530 Date Issued: 2010/01/21 DQD507Rev.2009-09-01 CAN/CSA-C22.2No.
Emerson Process Management GmbH & Co. OHG A-21 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram A.4 Block Diagram X-STREAM V ersion.
Emerson Process Management GmbH & Co. OHG A-22 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-23 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-24 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-25 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-26 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-27 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-28 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-29 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-30 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-31 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-32 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-33 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix A.4 Block Diagram.
Emerson Process Management GmbH & Co. OHG A-34 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.5 W ater V apor: Relationship of Dewpoint, V ol.-% and g/Nm³ Note! Standard conditions: 273 K (0 °C) and 1013 hPa. Water concentration calculated at dry standard conditions.
Emerson Process Management GmbH & Co. OHG A-35 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix Because of legal regulations and for the safety of Emerson Process Management employee.
Emerson Process Management GmbH & Co. OHG A-36 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 PLCQuickReferenceCard Rev.
Emerson Process Management GmbH & Co. OHG A-37 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix PLCQuickReferenceCard Rev.
Emerson Process Management GmbH & Co. OHG A-38 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 PLCQuickReferenceCard Rev.
Emerson Process Management GmbH & Co. OHG A-39 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix PLCQuickReferenceCard Rev.
Emerson Process Management GmbH & Co. OHG A-40 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 PLCQuickReferenceCard Rev.
Emerson Process Management GmbH & Co. OHG A-41 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A Appendix PLCQuickReferenceCard Rev.
Emerson Process Management GmbH & Co. OHG A-42 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010.
Emerson Process Management GmbH & Co. OHG A-43 A Appendix X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 A.8 Assignment of T erminals and Sockets A.
X-STREAM XE Emerson Process Management GmbH & Co. OHG A-44 Instruction Manual HASXEE-IM-HS 04/2010 A.8 Assignment of T erminals and Socket A.8.2 Field Housings XST A: Standard Strip With Standard .
Emerson Process Management GmbH & Co. OHG I-1 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Index Modbus Activated 7-35 multiple ranges 7-30 Preparing 7-7 Procedure 6-36 Program Sequence 6-39 Restoring 7-41 Setup 6-33 Span Calibration 6-7 , 6-8 , 6-10 , 6-15 , 6-34 , 6-39 , 6-42 , 6-69 , 7-5 , 7-7 , 7-8 , 7-18 .
Emerson Process Management GmbH & Co. OHG I-2 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Cross Interference Linearization Curve 6-58 CSA 2-2 , A-1 , A-14 ... A-20 Certicate of Compliance A-1 , A-14 ... A-20 D Damping see Setup Menu Data logger 1-4 , 6-19 , 6-21 , 6-105 , 6-106 , 6-122 , 7-66 .
Emerson Process Management GmbH & Co. OHG I-3 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Setup 6-88 Intended use statement S-5 Internal SHS 6-62 , 6-73 , 7-12 see also Setup Menu: Interna.
Emerson Process Management GmbH & Co. OHG I-4 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Flow monitor switch 1-6 Flow sensor 1-6 , 6-88 Heated area 1-8 Installed options 5-14 , 6-36 .
Emerson Process Management GmbH & Co. OHG I-5 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010 Index Measurement Ranges 6-44 Measurements Results 6-24 Menu Access 6-32 Range Gases 6-34 Serial i.
Emerson Process Management GmbH & Co. OHG I-6 X-STREAM XE Instruction Manual HASXEE-IM-HS 04/2010.
.
© 2010 Emerson Process Management GmbH & Co. OHG Rosemount Analytical Process Gas Analyzer Center of Excellence Emerson Process Management GmbH & Co. OHG Industriestrasse 1 63594 Hasselroth Germany T +49 6055 884 0 F +49 6055 884 209 Rosemount Analytical Inc.
Ein wichtiger Punkt beim Kauf des Geräts Emerson HASXEE-IM-HS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Emerson HASXEE-IM-HS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Emerson HASXEE-IM-HS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Emerson HASXEE-IM-HS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Emerson HASXEE-IM-HS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Emerson HASXEE-IM-HS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Emerson HASXEE-IM-HS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Emerson HASXEE-IM-HS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Emerson HASXEE-IM-HS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
