Benutzeranleitung / Produktwartung EWC09D5 B, EWC09D5 des Produzenten Emerson
Zur Seite of 40
9-INCH COLOR TV/D VD EWC09D5 EWC09D5 B O WNER’S MANU AL INSTRUCCIONES EN ESP AÑOL INCLUID AS. If you need additional assistance f or set-up or operating after reading owner’ s manual, please call TO LL FREE : 1-800-256-2487. Or visit our WEB SITE at http://www .
– 2 – EN – 2 – 1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
– 3 – EN – 3 – GR OU N D C LA MP S NEC - NATIONAL ELE CTRICAL CO DE EXA MPLE OF ANTENNA G ROUNDI NG A S PER NAT IONAL EL ECT RICAL CODE S 2898A WI RE DI SCHARGE UNIT (NEC SECTI ON 810-20 ) GR .
– 4 – EN – 4 – RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
– 5 – EN – 5 – AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat.
– 6 – EN – 6 – T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .
– 7 – EN – 7 – – 7 – – 7 – TV Mode • 181 channel capability PLL frequency synthesiz- er tuner with direct station call (A converter may be necessary to view scrambled cable channels.
– 8 – EN – 8 – DC 13.2V COAXIAL ANT. 39 40 38 37 REAR VIEW [Fig. 3] – 8 – – 8 – 7. Remote Sensor Window 8. C ST OP Button [page 19] Stops operation of the disc. 9. H SKIP Button [page 21] Plays back from the beginning of the current chapter or track.
– 9 – EN – 9 – – 9 – – 9 – – 9 – – 9 – 30. RETURN Button [page 21, 24] Returns to the previous screen in the setup menu. 31. ENTER Button [pages 14, 19] Hit to accept a setting. 32. K / L / s / B Buttons TV Mode: [page 14] Press to select a setting mode from the menu on the TV screen.
– 10 – EN – 10 – NOTE: • Before plugging the an antenna into the ANT . jack of the unit, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT . jack of the unit. – 10 – – 10 – PREP ARA TION FOR USE ANTENNA/CABLE CONNECTION The Indoor Antenna (supplied) is detachable.
– 11 – EN – 11 – POWER VIDEO L A UDIO R AUDIO L VIDEO R ex. VCR or video camera , etc. (OUT) A udio Cable (IN) (commercially av ailable) (OUT) Video Cable (IN) (commercially av ailable) – 11 – – 11 – CONNECTING TO EXTERNAL INPUT JACKS NOTES: • Be sure your vehicle has a 13.
– 12 – EN – 12 – CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGIT AL INPUT JACKS (for DVD) Use an audio coaxial digital cable (commercially available) for the audio connections. Connect to an amplifier equipped with digital input jacks such as MD Deck or DA T Deck.
– 13 – EN – 13 – – 13 – – 13 – CONNECTING TO A DOLBY DIGIT AL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGIT AL Data stream from its COAXIAL jack.
– 14 – EN – 14 – – 14 – – 14 – – 14 – – 14 – SET UP FOR THE FIRST TIME 1 Plug in the unit power cor d Plug the unit power cord into a standard AC outlet. NOTE: • If some digits appear in the corner of the screen, hit [POWER] without unplugging the power cord.
– 15 – EN – 15 – – 15 – – 15 – – 15 – – 15 – DEGAUSSING This television has a degaussing circuit that will clear up color errors on the TV screen that are caused by any excess magnetism which happens to get too close to the TV .
– 16 – EN – 16 – – 16 – – 16 – CHANNEL RESETTING Make sure ... • The unit power must be turned on. RESETTING CHANNELS 1 Select “CHANNEL SET UP” Hit [SETUP] on the remote control. Press [ K / L ] to point to “CHAN- NEL SET UP”, then hit [ENTER] .
– 17 – EN – 17 – – 17 – – 17 – MENU LANGUAGE 1 Select “LANGU A GE” Hit [SETUP] . Press [ K / L ] to point to “LAN- GUAGE”, then hit [ENTER] to select “ENGLISH” or “ESP AÑOL”= Spanish or “FRANÇAIS”= French. 2 Exit the Language mode Hit [SETUP] to return to exit the menu.
– 18 – EN – 18 – – 18 – – 18 – ABOUT THE DISCS If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as P AL cannot be played back.
– 19 – EN – 19 – – 19 – – 19 – – 19 – – 19 – BASIC PLA YBACK Getting started ¡ T urn on the power of amplifier and any other com- ponents, if necessary . 1 Hit [PO WER]. ¡ The power will turn on. 2 Hit [OPEN/CLOSE A ] to open disc loading tray .
– 20 – EN – 20 – – 20 – – 20 – – 20 – – 20 – STEP BY STEP PLA YBACK 1 During playbac k, hit [P A USE F ]. ¡ Playback will pause and sound will be muted. 2 The disc goes forwar d by one frame eac h time [P A USE F ] is hit. 3 To e xit step by step pla yback, hit [PLA Y O ].
– 21 – EN – 21 – – 21 – – 21 – – 21 – – 21 – TRACK SEARCH There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons 1 Press the Number buttons to enter the desired T rack Number . ¡ Playback will start at the selected track.
– 22 – EN – 22 – – 22 – – 22 – – 22 – – 22 – REPEA T REPEA T TITLE / CHAPTER To activate the repeat function, hit [REPEA T] during playbac k. ¡ The repeat mode changes as described below every time you hit the button. DVD-V REPEA T is available only during playback.
– 23 – EN – 23 – – 23 – – 23 – – 23 – – 23 – AUDIO LANGUAGE The unit allows you to select a language during DVD (if multi languages are available) playback. 1 Hit [A UDIO] during playback. 2 Hit [A UDIO] repeatedly to select your desired language.
– 24 – EN – 24 – – 24 – – 24 – – 24 – – 24 – CAMERA ANGLE Some DVDs contain scenes which have been shot simultaneously from various angles. Y ou can change the camera angle when the “ ” icon appears on the screen. 1 Hit [ANGLE] during playbac k.
– 25 – EN – 25 – – 25 – – 25 – – 25 – – 25 – For DVD-Vs 1 Hit [DISPLA Y] during playback to sho w cur- rent Chapter . ¡ The elapsed and remaining playing time of the current chapter will be displayed. 2 Hit [DISPLA Y] again to sho w current Title .
– 26 – EN – 26 – CHANGING THE DVD SETUP ITEMS CUSTOM MENU Y ou can change the DVD player ’ s settings. 1 Hit [SETUP] twice in ST OP mode so that the D VD SETUP menu appears. ¡ Hit [ L ] to select “CUSTOM” then hit [ENTER] . NOTE: ¡ If the menu does not appear , hit [PLA Y O ] first, then hit [STOP C ] .
– 27 – EN – 27 – – 27 – – 27 – – 27 – – 27 – – 27 – AUDIO SETTINGS Choose the appropriate Audio settings for your equip- ment as it only affects during the playback of DVD Follow steps 1 to 2 in the “CUSTOM MENU” sec- tion on page 26.
– 28 – EN – 28 – – 28 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back.
– 29 – EN – 29 – – 29 – – 29 – – 29 – – 29 – – 29 – – 29 – – 29 – If the unit does not perform properly when operated as instructed in this Owner ’ s Manual, check the player, consulting the following checklist.
– 30 – EN – 30 – – 30 – – 30 – – 30 – – 30 – – 30 – NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations.
– 31 – EN – 31 – – 31 – – 31 – – 31 – – 31 – – 31 – – 31 – – 31 – – 31 – CABINET CLEANING • W ipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry .
– 32 – EN – 32 – – 32 – – 32 – – 32 – – 32 – – 32 – CR T : 9 inch in-line gun, 90˚ deflection tube T elevision system: NTSC-M TV Standard Channel coverage: VHF: 2 ~ 13 UHF.
– 33 – ES INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 33 P ANEL FRONT AL DE LA UNIDAD . . . . . . . . . . . . . . . 33 MANDO A DIST ANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 33 VIST A POSTERIOR . . . . . . . . . . . . . .
– 34 – ES 22. Botón CLEAR Para cancelar o borrar un ajuste entrado actualmente. 23. Botón DISPLA Y Modo del televisor: Presione para visualizar el número del canal en la pantalla. Si presiona de nuevo, el número del canal desaparecerá. Modo de D VD: V isualiza el estado actual en la pantalla del televisor .
– 35 – ES ANTENA COMBINADA DE VHF/UHF La antena combinada de VHF/UHF de 75 ohmios puede conectarse a la toma ANT . ANTENA SEP ARADAS DE VHF/UHF En algunas zonas será necesario utilizar una antena exterior .
– 36 – ES NOT AS: • Cerciórese que su vehículo tiene un sistema eléctri- co con tierra negativa de 13,2 voltios (12 voltios). • Cerciórese de utilizar sólo el cable de batería de coche entregado. El uso de otros cables puede dañar la unidad.
1 Enchufe el cab le eléctrico Enchufe el cable de alimentación de la unidad en una toma de CA. NOT A: • Si aparecen algunos dígitos en la esquina de la pantalla, presione [POWER] sin desenchufar el cable de la alimentación. 2 Encienda la unidad Presione [POWER] para encender la unidad.
– 38 – ES REPRODUCCIÓN BÁSICA P ara empezar ¡ Conecte el interruptor del amplificador y otros equipos, si fuera necesario. 1 Presione [PO WER]. ¡ La alimentación se conectará. 2 Presione [OPEN/CLOSE A ]. ¡ La bandeja de carga del disco se abrirá.
– 39 – ES MEMO.
Printed in Malaysia 1EMN20217 TD300UA ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this product, free of charge in the USA in the event of defect in materials or workman- ship as follows: DURA TION: PA R TS: FUNAI CORP .
Ein wichtiger Punkt beim Kauf des Geräts Emerson EWC09D5 B, EWC09D5 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Emerson EWC09D5 B, EWC09D5 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Emerson EWC09D5 B, EWC09D5 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Emerson EWC09D5 B, EWC09D5 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Emerson EWC09D5 B, EWC09D5 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Emerson EWC09D5 B, EWC09D5 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Emerson EWC09D5 B, EWC09D5 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Emerson EWC09D5 B, EWC09D5. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Emerson EWC09D5 B, EWC09D5 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
