Benutzeranleitung / Produktwartung CKD5808 des Produzenten Emerson
Zur Seite of 39
O W NER ’ S M ANUA L C K D 5 8 0 8 V i s i t ou r w eb s i t e a t w ww . e m e r s on r ad i o . c o m S m a r t S e t ® C D C l o c k R a d i o w i t h A u t o m a t i c T i m e S e tt i ng S ys t e m a n d A M / F M S t e r e o R a d i o ( U . S .
1 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
2 Thank You ………… For purchasing this Emerson Research Stereo CD Clock Radio with the patented SmartSet ® automatic time setting system. As soon as you plug-in your radio for the first time, and after every power interruption, the clock will automatically set itself to the correct, year, month, date, day, and time.
3 We have taken great care to make sure that this unit was in perfect working order when it left our factory. If you have any problems with the set-up or operation of this model please do not return it to the dealer. Please call the Emerson Consumer Products Customer Service Hotline, toll-free at: 1-800-898-9020.
4 IMPOR TANT NOTES • O pe r a t e c on t r o l s a nd s w i t c h e s a s de sc r i bed i n t he m a nua l . • B e f o r e t u r n i n g ‘ O n ’ t h e po w e r , m a k e c e r t a i n t h a t po w e r c o r d i s p r ope r l y i n s t a ll ed .
5 PRE PA RATION FOR USE Unpacking and Set-up • Remove the unit from the shipping carton and remove all packing material from the unit. Please save the carton and packing material if possible in the event that your unit ever needs to be returned for service.
6 Installing The Sure-Alarm Back-up Battery (Not Included) The Sure-Alarm battery compartment is located on the back panel. 1.) Press down on the battery door locking tab as shown and remove the battery door. 2.) Gently pull the battery terminal outside of the compartment just far enough so you can connect the battery.
7 Low Battery Indicator Note : The Low Battery indicator “ ” only appears in the main display when the unit is in the power ‘ Off ’ mode. • If you install a 9- Volt battery in the Sure Alarm circuit as described above, the Low Battery indicator disappears.
8 Power Source This system is designed to operate on 120V AC 60Hz house current onl y. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty. N o t e : T he sy s t e m ha s a po l a r i z ed A C p l ug w i t h one w i de b l a de a nd one na rr o w b l ade .
9 LOC ATION OF CONTROLS AND INDIC ATORS Front Panel 29 1 2 3 1 4 10 11 9 8 12 7 13 6 14 15 5 17 18 19 32 31 30 29 28 27 26 25 24 23 22 21 20 Top Panel 33 16 CKD5808_031406.
10 1.) Speakers. 2.) Multi-Function LED Display. 3.) 3- Volt Lithium Battery Compartment (Bottom Cabinet). 4.) Lighted Dial Pointer. 5.) SLEEP Button. 6.) FUNCTION ( CD / RADIO ) Button. 7.) POWER ON/OFF Button. 8.) ALARM 1 ( BUZZER / MUSIC / OFF ) Selector Switch.
11 OPER ATING INSTRUCTIONS • Make sure that you have extended the AC power cord to its full length. The FM antenna is built into the power cord. • Make sure that you have installed a fresh 9- Volt battery in the Sure Alarm circuit if you want the Sure Alarm battery back up circuit to operate.
12 S e t t i n g Th e T i m e , T h e F i r s t T i m e I M P O R T AN T : T he f i r s t t i m e y ou c onne c t y ou r ne w S m a r t S e t ® CD c l o ck r ad i o t o t he A C ou t l e t t he i n t.
13 D a t e D i s p l a y T o s ee t he c o rr e c t da t e a t a n y t i m e , d ep r e s s t he M O N T H / DA T E bu tt on . T he d i s p l a y c ha nge s f r o m t i m e t o m on t h a nd da t e ( MM / DD ) . F o r e x a m p l e , M ay 21 s t w ill a ppe a r a s “ 5 21 ” .
14 M a n u a l T i m e A d j u s t m e n t s S o m e peop l e li k e t o s e t t he i r c l o cks 5 t o 10 m i nu t e s f a s t t o m a k e s u r e t ha t t he y w ill a l w a y s be o n t i m e .
15 S e l ec t i n g T h e A l a r m M o d e Y ou r S m a r t S e t ® c l o ck r a d i o a ll o w s y ou t o s e l e c t f r o m a m ong t h r ee d i ff e r en t a l a r m ope r a t i on m ode s f o r e i t he r a l a r m . T he a l a r m m ode s a r e : • E ve r y d ay – t he a l a r m w ill t u r n on a ll 7 da y s .
16 Listening To The Radio 1 . ) P r e ss t he P O W E R O N / O FF b u tt on on t he t op pane l t o t u r n t he sy s t e m ‘ O n ’ . T he P W R i nd i c a t o r a ppea r s i n t he d i s p l a y . 2 . ) S e t t he F UNC T I O N ( CD / R A D I O ) s e l e c t o r s w i t c h o n t he l e ft s i de pa ne l t o “ RAD I O ” .
17 Antenna Information FM : The FM antenna is built in the AC power cord. You may have to extend and vary the direction of the AC power cord until you find the position that provides the best reception. AM : The AM bar antenna is inside the cabinet of the main unit.
18 P l a y i n g C o m p ac t D i s c s Important: This CD player can play normal CDs plus CD Recordable (CD-R) and CD ReWritable (CD-RW) discs. However the playability of CD-R/RW discs may be affected by the type of software that was used in ‘ ripping ’ the tracks from the original discs and ‘ burning ’ the tracks onto the blank media.
19 5.) The display briefly shows “ Cd ” and then two dashes “ – – ” will appear as the player reads the disc. After a few seconds the display will show the total number of tracks on the disc, then playback begins on Track 1 .
20 Notes: • If you shut the power off while a CD is playing and you leave the disc in the player, the disc will start playing from track 1 when you switch the system ‘ On ’ again. • To see the track number that is playing press the TIME button once.
21 REPE AT Playback You can repeat a single track or the entire disc continuousl y . Repeat playback can be selected while a disc is playing or while the disc is stopped.
22 Programmed Playback Programmed playback allows you to program the player to play up to 20 tracks on a disc in any desired orde r. You may also program the same track to play multiple times within the same program if desired. Note : You cannot program the player while the disc is playing.
23 7.) After the last programmed track has played the player stops and the PL AY and PROG indicators go ‘ Off ’ . However the program sequence remains in the memory. To play the programmed sequence again press the PROGRAM button and then press the PL A Y/ PA USE button.
24 Alarm Operation The dual alarms in this system give you the option of waking to the radio, an electronic buzzer tone, or your favorite track on your favorite CD. You may also program one or both of the alarms for weekdays onl y , weekends only, or everyday operation.
25 Wake To Buzzer (Crescendo Alarm) Note : Alarm 1 and Alarm 2 have different buzzer sounds. Alarm 1 is a “ single beep ” sound. Alarm 2 is a “ double beep ” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.
26 Wake To CD 1.) Load the desired CD in the player, start playback and adjust the VOLUME control to the desired wake up level. Then shut the power ‘ Off ’. 2.) Slide the ALARM 1 and/or ALARM 2 selector switches, located on the left side panel to the “ MUSIC ” position.
27 S noo z e A l a r m W hen t he a l a r m s t u r n on i n t he m o r n i ng y ou c a n p r e ss t he S N OO Z E bu tt on t o c a t c h a f e w m i nu t e s e x t r a s l ee p . T he S noo z e f un c t i on s t o p s t he a l a r m f o r 9 m i nu t e s a nd t hen t u r n s t he a l a r m ‘ O n ’ aga i n .
28 SLEEP Timer The Sleep Timer allows you to operate the radio or CD player for up to 99 minutes while you are falling asleep and then shuts the power off automaticall y.
29 NAP Timer (Buzzer Alarm Only) The Nap timer function will wake you to the buzzer alarm after a nap of up to 99 minutes without the need to change your regular Alarm 1 or Alarm 2 settings. 1.) If the system is playing, shut the power ‘ Off ’. 2.
30 PHONES (Stereo Headphone) Jack This system includes a stereo headphone jack for p r i v a t e li s t en i ng w i t h ou t d i s t u r b i ng o t he r s .
31 C h a n g i n g Th e L i t h i u m B a t t e r y L i k e a ll ba tt e r i e s , e v en t ua ll y t he bu il t i n li t h i u m ba tt e r y w ill need t o be r ep l a c ed .
32 4 . ) R e m o v e t he o r i g i n a l ba tt e r y f r o m t he ho l de r and i n s e r t t he ne w ba tt e r y i n t o t he ho l de r t he s a m e w a y , ob s e r v i ng t he po s i t i v e ( + ) d i r e c t i on . S li de t he ho l de r w i t h t he ne w ba tt e r y ba ck i n t o t h e s l o t i n t he c a b i ne t.
33 R es e t t i n g T h e C l o c k A f t e r A T o t a l M e m o r y L o s s If y ou do no t c ha nge t he bu il t i n li t h i u m b a tt e r y w i t h i n a r ea s ona b l e pe r i od o f t i m e a.
34 5 . ) D ep r e ss t he T I M E bu tt on and t he bu tt on t o s e t t he d i s p l a y t o t he c o rr e c t t i m e . B e s u r e t o c o n f i r m t ha t y ou ha v e s e t t he t i m e c o rr e c t l y t o ‘ A M ’ o r ‘ P M ’ b y ob s e r v i ng t he A M i nd i c a t o r .
35 C AR E A N D M A I N T E NANC E Compact Disc Care • To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • F i nge r p r i n t s and du s t s hou l d be c a r e f u ll y w i ped o ff t he d i sc’ s r e c o r ded s u r f a c e w i t h a s o ft c l o t h .
36 T O F I N D T H E L O C A T I O N A ND P H O N E NU M BE R O F Y O UR N EA R ES T SE R V I C E C E N T E R PE R M I TT E D T O PE R F O R M W A RR A N T Y ... C A LL T O LL F R EE : 1 - 800 - 6 95 - 0098 SE R V I C E F O R CU S T O M E R SE R V I C E , P L EASE W R I T E T O : E m e r s on R ad i o C o r p .
37 L I M I T E D W ARRAN T Y E m e r s o n R a d i o C o r p. w a r r a n t s m a nu f a c t u r i n g d e f ec t s i n o r i g i n a l m a t e r i a l , i n c l u d i ng o r i g i n a l p a r t s a n.
E M E R S O N P a r t N o . 16 - 2998 603 - 03 P r i n t ed i n C h i na CKD5808_031406.p65 14/3/2006, 11:32 38.
Ein wichtiger Punkt beim Kauf des Geräts Emerson CKD5808 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Emerson CKD5808 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Emerson CKD5808 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Emerson CKD5808 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Emerson CKD5808 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Emerson CKD5808 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Emerson CKD5808 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Emerson CKD5808. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Emerson CKD5808 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
