Benutzeranleitung / Produktwartung L 56840 des Produzenten Electrolux
Zur Seite of 36
LAVAMAT L 56840 User manual Washing machine.
Thank you for choosing on e of our high-quality prod ucts. To ensure optimal and regula r performanc e of your appliance please read this instruction manual carefully.
Operating instructions Safety information Read carefully & keep for future reference. • The safety of Your appliance complies with t he industry standa rds and with legal re - quirements on the safety of appliances. Howeve r, as manufacturers, we feel it is our duty to provide the following safety notes.
• All packing and transit bolts must be remove d before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the us er manual.
• M a k e su re t ha t c h il d re n or p et s d o no t cl i mb into the drum. To prevent children or pets becoming trapped inside the drum the ma - chine incorporates a sp ecial feature. To ac - tivate this device, rotate t he button (without pressing it) inside the door clockwise until the groove is horizontal.
Detergent dispenser drawer Compartment for prewash phase or stain re - mover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Ac - tion phase in the main wash. Compartment for powder or liquid detergent used for main wash .
Indicator pilot lights (7) After having presse d the button 5 , the WASHING (HOOFDWAS - LAVAGE) pilot light ( 7.1 ) illumi - nates. When the pilot light 7.1 comes on this means that the machine is operating. When the programme has fini shed, the END (EINDE - FIN) pilot light ( 7.
1. Pull out the dispenser drawer until it stops. Measure out the amount of deter - gent required, pour it into the ma in wash compartment a n d , i f y o u w i s h t o c a r r y out the prewash phase or to perform the stain function, pour the detergent or the stain remover into the compartment marked .
Press the button 2 repeatedly to change the spin sp eed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. RINSE HOLD : by selecting this option the wa ter of the last rinse is not emptied out to prevent the fabrics from creasing.
You must select this option after you have set the programme and before you press the button 5 . You can cancel the delay time at any moment, before you press the button 5 .
After closing the door, it is necess ary to select the pro g ramme and options again and to press button 5 . At the end of the programme The machine stops automatically. The pilot light of button 5 and pilot light 7.1 go off. The phase light 7.2 goes on.
Programme Maximum and Minimum Temper ature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Com - partment COTTONS WITH PREWASH + VOORWAS / + PRELAVAGE 95° - 40° Prewash - Main wash - Rinses - Long spin Maximum spin speed 1600 rpm Max.
Programme Maximum and Minimum Temper ature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Com - partment WOOL (HANDWASH) WOL PLUS - LAINE PLUS 30° - Cold Main wash - Rinses - Short spin Maximum spin speed at 1200 rpm Max.
Programme Maximum and Minimum Temper ature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Com - partment REFRESH OPFRISSEN - RAFRAÎCHIR 30° Main wash - Drain - S hort spin Maximum spin speed at 1200 rpm Max.
Temper atures 95° or 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60°/50° for normally soiled, colour fast ga rments (e.g. shirts, night dresses, pyjamas....) in linen, cotton or synt hetic fibres and for lightly soiled white cotton (e.
Blood: treat fresh stains with cold water. For dr ied stai ns, soak over ni ght in water with a special detergent then rub in the s oap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
A water softener must be added when water has a medi um-high degree of har dness (from degree of hardness II). Follow the manufacture r ’s instructions. Th e qu antity of detergent can then always be adjusted to degree of hardness I (= soft). Level Characteristic Degrees of water hardness German °d H French °T.
2. Remove the conditio ner insert from the middle compartment. 3. Clean all parts with water. 4. Put the conditioner in sert in as far as it will go, so that it is firmly in place. 5. Clean all parts of the washing machine, especially the nozzles in the top of the washing-in chamber, with a brush.
• the machine makes an unu sual noise durin g dr aining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1. Disconnect the appliance. 2. If necessary wait until the water has cooled do wn. 3. Open the pump door. 4.
8. Put the cap back on the emergency emp - tying hose and place the latter back in its seat. 9. Screw the pump fully in. 10. Close the pump door. WARNING! When the appliance is in use and depending on the programme se lected there can be hot water in the pump.
5. Unscrew the hose from the machine. Kee p a rug nearby because some water may flow. 6. Clean the filter in the valve with a stiff brush or with the piece of cloth. 7. Screw the hose back to the machine and make sure the connection is tight. 8. Turn on the water tap.
3. screw the water inlet hose back on and repo sition the emergency emptying hose after having put the cap on again. By doing this, any water remaining in the machine is removed, avoi ding ice forming and consequently damage to the appliance. When you use the machine again, make sure that the ambient temperature is above 0°C.
Problem Possible cause/Solution The machine does not fill: The water tap is closed. (Yellow pilot light of button 5 blinks) • Open the wat er tap. The inlet hose is squashed or kinked. (Yellow pilot light of button 5 blinks) • Check the inlet hose connection.
Problem Possible cause/Solution Unsatisfactory washing results: Too little detergent or unsuitable detergent has been used. • Increase the detergent quanti ty or use an - other one. Stubborn stains have not been treated p rior to washing. • Use commercial pro ducts to treat the stub - born stains.
If you are unable to identi fy or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and pur - chase date of your machine: the Service Centre will require this information.
Installation instructions Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine eve r has to be transported again.
3. Unscrew the three bolts with the key sup - plied with the machine. 4. Slide out the relevant plastic spacers. 5. Open the porthol e, take out the inlet hose from the drum and remove the polystyr - ene block fitted on the door seal.
6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. 7. Connect the water in let hose as described under the paragraph «Water inlet». Positioning and levelling Install the machine on a flat hard floor.
1. Open the porthole and extr act the inlet hose. 2. Connect the hose with the an gled con - nection to the machine. Do not place the in let ho se downwards. Angle the hose to the left or right de - pending on the position of yo ur water tap. 3. Set the hose correctly by loosenin g the ring nut.
Water-stop device The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to nat - ural ageing of the hose. This fault is shown by a red sector in the window «A» . Should this occur, turn the water tap off and refer to your Service Centre to replace th e hose.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. Electrical connection Information on the electrical connection is gi ven on the rating plate on the inner edge of the appliance door.
Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be r e cycled by disposing of them pr o perly in appropriate co llection containers.
33.
34.
35.
www.electrolux.com 132948440 - 00 - 452009.
Ein wichtiger Punkt beim Kauf des Geräts Electrolux L 56840 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Electrolux L 56840 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Electrolux L 56840 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Electrolux L 56840 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Electrolux L 56840 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Electrolux L 56840 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Electrolux L 56840 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Electrolux L 56840. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Electrolux L 56840 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
