Benutzeranleitung / Produktwartung V1525BT des Produzenten Dimplex
Zur Seite of 23
7208630100R01 PRACTICAL USER’S GUIDE FOR THE IN-STUD FIREPLACE MODEL NUMBER: V1525BT V1525RT Valued Customer, We are pleased that you have chosen to purchase an electric fireplace manufactured by Dimplex North America Limited. Over the years, valuable memories will occur around the warmth and comfort of your hearth.
CONTENTS P AGE 1 – 2 Import ant Instructions P AGE 4 Fireplace Inst allation P AGE 13 Operation P AGE 15 Maintenance P AGE 18 W arranty QUICK REFERENCE GUIDE FOR THE IN-STUD FIREPLACE 1.
IMPORT ANT INSTRUCTIONS RET AIN THIS USER’S GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. 1. Read all instructions before using the In-S tud fireplace.
9. T o disconnect the unit, turn the controls of f, and then remove the plug from the outlet or switch off at main power supply panel if the unit is hardwired. 10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage to the heater .
3 19. Disconnect all main power supply (unplug the unit or switch off at main service panel) before performing any cleaning, maintenance or relocation of the unit.
4 NOTE: Procedures and techniques that are considered important enough to emphasize. CAUTION: Procedures and techniques, which, if not carefully followed, will result in damage to the equipment. W ARNING: Procedures and techniques, which, if not carefully followed, will expose the user to the risk of fire, serious injury , illness or death.
5 Remove glass assembly before installing fireplace on or into a wall . 1. Remove screws securing glass assembly on the mounting tabs. (Figure 1) 2. Use both handles on the sides of the glass assembly , lif t and remove the assembly from the fireplace.
6 NOTE It is recommended that the bottom of the unit not be mounted higher than 48" from the ground to maintain an optimized viewing angle of the flame. CAUTION The fireplace must be mounted at two points, one of which must be on a wall stud. W ARNING High temperatures may be generated under certain abnormal conditions.
7 Figure 3 3. W ith a wall stud finder , locate the center of the wall stud, drive a wood screw into stud and leave approximately 1/8" exposed threads for the fireplace to hang on.
8 tool to install a threaded drywall anchor as the drywall may distort, tear or slightly buckle as a result of over-torque. 6. W ith a Philip’ s head screw driver , screw that drywall anchor screw into the drywall anchor already in the wall, leave about 1/8" exposed threads for mounting the fireplace.
9 Built-In Instructions: W ARNING The installation of the fireplace unit must comply with the applicable local and/or national electrical codes and utility requirements. This installation should be entrusted to duly qualified personnel where required by law .
10 W ARNING Ensure method of installation does not obscure the air int ake slot s on bottom of unit in any manner . Keep minimum 4" clearance from bottom of unit to any surface such as the top of a cabinet. 3. Wire a dedicated, properly fused circuit with 120V , 15amp rating.
1 1 Figure 7 7. Route the power supply wire through the knockout on supplied alternative junction box cover and secure with a wire clamp (not supplied) (FIGURE 7.) 8. Connect the black wire (live) from the unit to the black wire from power supply . (FIGURE 7.
Figure 8 13. Att ach fireplace frame as shown in figure 4. Bathroom Inst allation This firebox must be protected by a GFI receptacle or circuit for bathroom use.
Operation The controls are located on the right hand side of the fireplace. Figure 9. A. MAIN ON/OFF SWITCH The switch has two ON positions marked with and “ ON ”. The “ ON ” position is for manual operation. In this position the built-in remote control is by-passed.
C. Heater Thermostat Control T o adjust the temperature to your individual requirements, turn the thermostat control upward all the way to turn on the heater . When the room reaches the desired temperature, turn the thermostat knob downward until you hear a click.
Battery Replacement T o replace the battery , slide battery cover open on the hand held transmitter . Inst all one 12-volt (A23) battery in the battery holder .
Helpful Hints It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs. Light Bulb Requirements Quantity of two 40W Chandelier or candelabra bulbs with E-12 (small) socket base, 120 V olt.
Figure 1 1 Glass Cleaning The front glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the front glass may collect dust particles, these can be removed by dusting lightly with a clean dry cloth.
OneY ear Limited W arranty Products to which this limited warranty applies This limited warranty applies to newly purchased Dimplex fireplaces and surrounds (mantels) and trims.
What this limited warranty does not cover This limited warranty does not apply to products that have been repaired (except by Dimplex or its authorized service representatives) or otherwise altered.
IN NO EVENT WILL DIMPLEX, OR ITS DIRECTORS, OFFICERS, OR AGENTS, BE LIABLE T O THE PURCHASER OR ANY THIRD P AR TY , WHETHER IN CONTRACT , IN T OR T , OR ON ANY OTHER BASIS, FOR ANY INDIRECT , SPECIAL,.
1-888-DIMPLEX 1-888-346-7539 Approved for use in the United States and Canada 1367 Industrial Road Cambridge, Ontario Canada, N1R 7G8 How State and Provincial law apply This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction.
Ein wichtiger Punkt beim Kauf des Geräts Dimplex V1525BT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dimplex V1525BT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dimplex V1525BT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dimplex V1525BT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dimplex V1525BT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dimplex V1525BT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dimplex V1525BT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dimplex V1525BT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dimplex V1525BT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
