Benutzeranleitung / Produktwartung EFS26PR des Produzenten Desa
Zur Seite of 44
TM UNVENTED (VENT -FREE) GAS COMP ACT CLASSIC HEARTH ® FIREPLACE OWNER’S OPERATION AND INSTALLATION MANUAL Save this manual for future reference. Save this manual for future reference. WARNING: If the information in this manual is not followed exactly, a fire or explosion may result caus- ing property damage, personal injury, or loss of life.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 2 WARNING: Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner flame patterns. Ceiling fans can create drafts that alter burner flame patterns.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 3 3 SAFETY INFORMA TION Continued SAFETY INFORMATION PRODUCT IDENTIFICATION 1. This appliance is only for use with the type of gas indicated on the rating plate.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 4 LOCAL CODES Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 5 5 ASSEMBLY Assembling Fireplace ASSEMBL Y ASSEMBLING FIREPLACE Tools Required: • Phillips screwdriver • 5/16" hex wrench • slotted screwdriver • scissors 1.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 6 AIR FOR COMBUSTION AND VENTILATION Providing Adequate Ventilation Determining Fresh-Air Flow for Fireplace Location AIR FOR COMBUSTION AND VENTILA TION Today’s homes are built more energy efficient than ever.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 7 7 3. Add the Btu/Hr of all fuel burning appliances in the space.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 8 Figure 6 - Ventilation Air from Outdoors Outlet Air Ventilated Attic Outlet Air Inlet Air Inlet Air Ventilated Crawl Space To Crawl Space To Attic Ventilation Air From Outdoors Provide extra fresh air by using ventilation grills or ducts.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 9 9 FIREPLACE CLEARANCES WARNING: Maintain the minimum clearances shown in Figure 7. If you can, provide greater clear- ances from floor, ceiling, and joining wall.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 10 Actual Framing Height 26" 26 7 / 8 " Front Width 26 3 / 4 " 26 7 / 8 " Depth 9 1 / 2 " 10 1 / 2 " Bottom 3/4" 3/4" 1.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 11 11 INST ALLA TION Continued Mantel Clearances for Built-In Installation If placing mantel above built-in fireplace, you must meet minimum clearance between mantel shelf and top of fireplace opening.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 12 10. Attach wood base to floor with two 1 3 / 4 " black screws pro- vided (see Figure 13). If the floor is concrete use anchor method (see Attaching W ood Base to Solid Floor , page 17).
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 13 13 Installing Blower Accessory Note: If you are using a mantel with your fireplace, use the following instructions. If your fireplace is built-in, see For Built-In Installation, page 14.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 14 Red Red Fan Switch (Auto/Off/On) Blue Blue Thermostat Switch (N.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 15 15 1 2 Remove Screw Valve Cover Shield Shoulder Screw Removing Valve Cover Shield 1. Open bottom louver assembly by swinging the assembly down (see Figure 22).
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 16 7. Insert the 4 wire harness into one of the round holes in the rear of the valve cover shield and through the rectangular hole in the front of shield (see Figure 23, page 15).
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 17 17 Extension Cord Use extension cord if needed. The cord must have a three-prong, grounding plug and a three-hole receptacle. Make sure cord is in good shape.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 18 Installation must include an equipment shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be upstream from heater (see Figures 30).
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 19 19 INST ALLA TION Continued INSTALLATION Connecting Equipment shutoff Valve To Heater Control (Cont.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 20 INST ALLA TION Continued Figure 34 - Checking Gas Joints (Propane/LP Only) Propane/LP Supply Tan.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 21 21 INST ALLA TION Continued Figure 38 - Installing Remote Receiver * Wire harness provided in the fireplace hardware pack.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 22 1. Remove log packaging material and discard packaging. Gen- tly place log on burner support (see Figure 44). The log should fit flat against top of burner support and log locator tabs fit into the slots under the log.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 23 23 CAUTION: Do not try to adjust heating levels by using the equipment shutoff valve.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 24 TO TURN OFF GAS TO APPLIANCE OPERATING FIREPLACE (THERMOSTAT-CONTROLLED MODELS) To Turn Gas Off .
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 25 25 Shutting Off Fireplace 1. T urn control knob clockwise to the OFF position. 2a. Set selector switch in the OFF position. 2b . If Using Optional Hand-Held Remote: Set selector switch in the OFF position to pre vent draining battery .
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 26 GWMT1 WALL MOUNTED THERMOSTAT (OPTIONAL) Make sure the heater switch is on AUTO and set the temperature adjustment on wall thermostat to the desired setting.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 27 27 INSPECTING BURNERS Check pilot flame pattern and burner flame patterns often. PILOT FLAME PATTERN Figure 55 shows a correct pilot flame pattern.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 28 WARNING: Turn off fireplace and let cool before cleaning. CAUTION: You must keep control areas, burner, and circulating air passageways of fireplace clean.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 29 29 TROUBLESHOOTING Note: All troubleshooting items are listed in order of operation. WARNING: Turn off and un- plug fireplace and let cool before servicing.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 30 TROUBLESHOOTING Continued OBSERVED PROBLEM Burner does not light after ODS/pilot is lit Delayed .
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 31 31 TROUBLESHOOTING Continued WARNING: If you smell gas • Shut off gas supply. • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 32 Thermostat Models: Thermostat Models: Remote-Ready Models: Remote-Ready Models: VMH10TPB, EFS10T.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 33 33 WIRING DIAGRAM (Remote-Ready Models Only) Switch Black Auto Off On Red Red White Thermopile Gas Control TPTH TH TPTH TP REPLACEMENT P ARTS Note: Use only original replacement parts.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 34 ILLUSTRA TED P ARTS BREAKDOWN THERMOSTAT-CONTROLLED MODELS: VMH10TPB, VMH10TNB, EFS10TP and EFS1.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 35 35 This list contains replaceable parts used in your fireplace. When order- ing parts, follow the instructions listed under Replacement Parts on page 33 of this manual.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 36 ILLUSTRA TED P ARTS BREAKDOWN REMOTE-READY MODELS: VMH26PRA, VMH26NRA (Shown), EFS26PR, EFS26NR,.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 37 37 P ARTS LIST REMOTE-READY MODELS This list contains replaceable parts used in your fireplace. When ordering parts, follow the instructions listed under Re- placement Parts on page 33 of this manual.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 38 CORNER MANTEL WITH FULL HEARTH BASE GMC63U Series - Unfinished GMC64F Series - Finished For all models. Space-saving mantel and hearth base corner design features clean, classic lines.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 39 39 RECEIVER AND HAND-HELD THERMOSTAT REMOTE CONTROL KIT - GHRCTA For all Remote-Ready Models. Allows the fireplace to be operated in a manually or thermostatically controlled mode.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 40 NOTES __________________________________________________________________________________________.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 41 41 • ACCESSORIES 1. Where will the product be used? ❍ Living/Family Room ❍ Office/W arehouse ❍ Utility Shed/Outbuilding ❍ Garage ❍ Bedroom ❍ Bathroom ❍ Other 2.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 42 2701 Industrial Drive P.O. Box 90004 Bowling Green, KY 42102-9004 TM Postage Required T APE T AP.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 43 43 NOTES _______________________________________________________________________________________.
107032-01F For more information, visit www.desatech.com For more information, visit www.desatech.com 44 LIMITED WARRANTY VENT-FREE COMPACT CLASSIC HEARTH ® FIREPLACE DESA International warrants this .
Ein wichtiger Punkt beim Kauf des Geräts Desa EFS26PR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Desa EFS26PR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Desa EFS26PR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Desa EFS26PR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Desa EFS26PR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Desa EFS26PR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Desa EFS26PR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Desa EFS26PR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Desa EFS26PR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
