Benutzeranleitung / Produktwartung AVR-1082 des Produzenten Denon
Zur Seite of 42
A V SURROUND RECEIVER A VR-3802 /1082 OPERA TING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI ISTRUZIONI PER L ’USO INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING ON / STANDBY ¢ OFF £ AVR-3802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE.
3 ENGLISH 2 We greatly appreciate your purchase of the A VR-3802. 2 T o be sure you take maximum advantage of all the features the A VR-3802 has to offer , read these instructions carefully and use the set properly . Be sure to keep this manual for future reference, should any questions or problems arise.
4 ENGLISH 4 FEA TURES 1. Digital Surround Sound Decoding Featuring 32 bit high speed DSP , operating entirely in digital domain, surround sound from digital sources such as DVD, LD, DTV and satellite are faithfully re-created.
5 ENGLISH Connecting video components • T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video quality . • When making connections, also refer to the operating instructions of the other components.
6 ENGLISH Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA 300 Ω /ohms FEEDER CABLE FM INDOOR ANTENNA (Supplied) 300 Ω /ohms AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND FM ANTENNA ADAPTER (Supplied) • An F-type FM antenna cable plug can be connected directly .
7 ENGLISH L R L R RL Decoder with 8- or 6-channel analog output Front Surround back Surround Subwoofer Center For instructions on playback using the external input (EXT .
8 ENGLISH Connections • When making connections, also refer to the operating instructions of the other components. ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) Connection jack for subwoofer with built-in amplifier (super woofer), etc.
9 ENGLISH 1 2 3 45 6 789 +1 0 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + - + - VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER VDP VCR-1 RDS PTY RT VCR-2 / V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.
10 ENGLISH NOTES: • The on-screen display signals are not output from the color difference (component) video signal (MONITOR OUT) jacks. • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component.
11 ENGLISH 2 Switch to the speaker configuration screen. ENTER SHIFT Center Sp. Front Sp. Subwoofer Surround Sp. A Surround back Sp. Surround Sp. B NOTE: • Select “ Large ” or “ Small ” not .
12 ENGLISH NOTES: — Assignment of low frequency signal range — • The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency signal range of channels set to “ Small ” in the setup menu.
13 ENGLISH 4 Once “ Meter ” or “ Feet ” is selected in Step 3, the Delay T ime screen appears automatically. 5 Select the speaker to be set. BAND MODE TUNING TUNING Example: When the distance is set to 3.6 m for the center speaker 6 Set the distance between the center speaker and listening position.
14 ENGLISH Use the CURSOR buttons to adjust all the speakers to the same volume. The volume can be adjusted between – 12 dB and +12 dB in units of 1 dB.
15 ENGLISH Set the multi pre-out output level adjustment. Setting the multi vol. level 1 At the “ System Setup Menu ” screen, select “ Multi V ol. Level ” and press the ENTER button. BAND MODE TUNING TUNING 2 Select the desired settimg. 0 dB, -40 dB: The output level is fixed at the set level and the volume can no longer be adjusted.
16 ENGLISH This button can be pressed at any time during the system setup process to complete the process. After completing system setup 1 At the System Setup Menu, press the SYSTEM SETUP button. The changed settings are entered and the on-screen display turns off.
17 ENGLISH 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + - + - VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER VDP VCR-1 RDS PTY RT VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD DISPLAY RETURN SETUP MENU SHIFT SURR.
18 ENGLISH Checking the preset memory settings 1 Press the power ON/SOURCE button and the OFF button at the same time. •“ SET UP ” appears on the remote control unit ’ s display.
19 ENGLISH If your A V component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit. Learning function 1 Press the power ON/SOURCE button and the OFF button simultaneously .
20 ENGLISH 5 Use the D and H cursor buttons to select the mode for the button at which the system call signals are to be registered, then press the ENTER button. BAND MODE TUNING TUNING ENTER SHIFT 6 “ SELECT KEY ” is displayed. Press the button at which the system call signals are to be registered, then press the ENTER button.
21 ENGLISH 4 Use the D and H cursor buttons to display “ RESET PRE ” on the remote control unit, then press the ENTER button. • After “ SEL PRE ” is displayed on the remote control unit ’ s display, the registered preset memory is displayed on the remote control unit ’ s display.
22 ENGLISH • The set is equipped with a function for searching for the registration number if you do not know the preset code (a 4-digit number) when setting the preset memory . Auto search function 2 Press the power ON/SOURCE button and the OFF button simultaneously .
23 ENGLISH B 1 15 2 3 Playing the input source 1 2 3 45 6 789 +10 0 TV/ VCR SKIP SKIP ENTER VOLUME CHANNEL + - + - TUNER VDP VCR-1 RDS PTY RT VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.
24 ENGLISH B 2 31 BASS TREBLE [1] Adjusting the sound quality (TONE) The tone control function will not work in the Direct mode. After starting playback 1 The tone switches as follows each time the TONE CONTROL button is pressed.
25 ENGLISH 1 Simulcast playback Use this switch to monitor a video source other than the audio source. Press the VIDEO SELECT button repeatedly until the desired source appears on the display . Cancelling simulcast playback. • Select “ SOURCE ” using the VIDEO SELECT button.
26 ENGLISH [3] Remote control unit operations during multi-source playback (selecting the input source) This operation is possible when Multi mode is selected. This operation is not possible in the REC OUT mode. 1 Select “ MUL TI ” using the RECEIVER button.
27 ENGLISH 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 13) or from the remote control unit, as described below .
28 ENGLISH NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The A VR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 10). 3 Set the surround parameter mode.
29 ENGLISH 3 Play a program source with the , mark. 4 Display the surround parameter menu. DIGITAL • The DTS indicator lights when playing DTS sources. Light SIGNAL DETECT • The SIGNAL DETECT indictor lights when playing DTS-ES/6.1-channel surround sources containing the identification signal.
30 ENGLISH 1 2 3 4 5 6 7 VIDEO GAME ROCK ARENA JAZZ CLUB MONO MOVIE (NOTE 1) MA TRIX WIDE SCREEN 5CH/7CH STEREO Use this to enjoy video game sources. Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions.
31 ENGLISH T one control setting • Use the tone control setting to adjust the bass and treble as desired. • T o operate the tone control from the remote control unit. 1 Display the surround parameter screen on the monitor . The screen for the selected surround mode appears.
* 32 ENGLISH Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.
33 ENGLISH 12 LISTENING TO THE RADIO Auto tuning B 1 1 Set the input function to “ TUNER ” . FUNCTION (Main unit) 2 Press the RECEIVER button on the remote control unit to select “ TUNER ” . RECEIVER (Remote control unit) 3 Watching the display , press the BAND button to select the desired band (AM or FM).
34 ENGLISH Recalling preset stations OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + - + - VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER PHONO CD DISPLAY RETURN SETUP MENU SHIFT SURR. PARA. OSD A/B MUTING BAND MODE TUNING TUNING 2 1 • T o call out preset stations from the remote control unit.
35 ENGLISH PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). For a description of each program type, refer to “ Program T ype (PTY) ” .
36 ENGLISH NOTES: • If step 3 does not work, start over from step 1. • If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory).
37 ENGLISH FL C SW FR FL C SW FR SL SR SB SL SR SB Multiple surround speakers Movie theater sound field Listening room sound field In this case it is important to achieve the same sense of expansion as in a movie theater with the surround channels.
38 ENGLISH • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears.
39 ENGLISH 2 Dolby Digital and Dolby Pro Logic Comparison of home surround systems No. recorded channels (elements) No. playback channels Playback channels (max.) Audio processing High frequency playback limit of surround channel Dolby Digital 5.1 ch 5.
40 ENGLISH Media CD LD (VDP) DVD Dolby Digital output jacks Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 3 Playback method (reference page) Set the input mode to “ AUTO ” or “ DTS ” (page 23).
41 ENGLISH System setup items and default values (set upon shipment from the factory) Surround modes and parameters System setup Default settings w e t y i Speaker Configuration (Surround Speaker Sett.
42 ENGLISH 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Front: 105 W + 105 W ( 8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D. ) 150 W + 150 W ( 6 Ω /ohms, 1 kHz with 0.7% T .H.D. ) Center: 105 W ( 8 Ω /ohms, 20 Hz ~ 20 kHz with 0.
Ein wichtiger Punkt beim Kauf des Geräts Denon AVR-1082 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Denon AVR-1082 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Denon AVR-1082 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Denon AVR-1082 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Denon AVR-1082 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Denon AVR-1082 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Denon AVR-1082 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Denon AVR-1082. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Denon AVR-1082 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
