Benutzeranleitung / Produktwartung Pocket DV2 des Produzenten Aiptek
Zur Seite of 40
Inst alla tion Guide Inst alla tion Guide Inst alla tion Guide Inst alla tion Guide.
.
Contents Contents 1 2 3 4 5 6 7 8 9 10 12 13 15 16 Specifications Notice Bundled Accessories Y our Camera Using your Camera Recording and T aking Pictures A/V out Mode TV Playback 18 20 21 Bundled Sof.
Specifications 1 Specifications Specifications Sensor T ype 1.3M CMOS Effective Pixels 1.3M (1280x1024 pixels) Internal Memory 16MB built-in SDRAM ( 6MB are available for capture, 2M is Hardware Interpolated) External Memory Built-in CF Card Slot Maximum 512 MB 1.
Notice 2 Notice 1. Do not drop, puncture or disassemble the camera. 2. Remove batteries during long periods between use. 3. Avoid all contact with water and dry hands before using. 4. Do not expose the camera to high temperature or leave it in direct sunlight.
Camera USB cable A V -out cable Strap 2 x AA Alkaline batteries CD driver User guide Bundled Accessories 3 Bundled Accessories T ripod (Optional).
Y our Camera Camera Parts (1) Shutter (2) Lens (5) Microphone LCD display (8) LED light USB port (12) CF Card slot (13) A V -out port (14) Eject ( CF Card) (15) Strap-holder (16) Speaker (17) Battery .
Battery Installation Y our camera runs on two AA alkaline batteries. High performance batteries are recommended for this camera for maximum battery life.
External Memory/ CF Card (Optional) In addition to 128 Mbits built-in SDRAM memory , your camera can store data on Compact Flash Cards ( 8MB-512MB). Insert you CF Card as shown. Files will be automatically stored on the CF Card after you've inserted the CF Card.
Using Y our Camera Opening LCD panel T urning on your camera /off Press and hold the MENU control for 3 seconds to t ur n on y ou r ca me ra . Manual shut-off: press the MENU control for 3 seconds. If you can't turn off your camera, please make sure you exit the MENU.
How to Enter MENU on LCD Display 8 Show MENU After turning on the camera, press MENU control to show MENU. T o exit MENU, select on LCD display . See . Mode Selecting Note Still picture mode and A VI Movie function are temporarily disabled when the MENU is shown.
Mode Selecting Mode Selecting 9 Mode Selecting Rotate (MENU control) up or down to shift between modes. Press to select mode. Screen Page 1 N (1) (2) (3) (4) (5) V oice Record Picture Quality Picture .
Focus Focus Set focus before taking pictures. 16"~40" (40cm~100cm) 40"~ (100cm~ ) Focus 10.
How to Hold your Camera 11 20cm~40cm Proper Distance between the camera and your eyes How to hold your camera With this proper distance when using the viewfinder to take pictures, subjects in the viewfinder would be clear . Microphone Do not cover the lens.
(1) Press and release to record. (2) Flashing LED light indicates recording in progress. T o Record A VI Movies (3) Press and release again to stop recording. VIDEO Recording and T aking Pictures VIDEO 12 Still pictures (1) Center the target in the viewfinder .
13 (1) Rotate (MENU control) to highlight and press to start voice recording. (3) Speak directly into the microphone. (4) Press to stop voice recording.
Select to playback movies, still pictures and recorded audio files. (See Fig.1) " Playback" icon Playback thumbnail AV I (1) Rotate (MENU control) to highlight . (2) Press and you enter thumbnail mode. (3) Rotate to shift between thumbnails.
Image Resolution & Quality 15 Three kinds of resolution and two kinds of quality are available for still image: Steps (1) Rotate (MENU control) to highlight , or . (2) Press to select , or . (3) Rotate to highlight or . (4) Press to select or . (5) Press shutter to take pictures.
16 A VI Movies, Still Pictures and V oice Recording Storage Capacity Still Pictures Storage Capacity Y our pictures are stored as JPEG files. Pictures storage capacity depends on CF Card storage capacity and your built-in SDRAM memory . Y our movies are stored as A VI files.
17 A VI Movies, Still Pictures and V oice Recording Storage Capacity 16MB 32MB 64MB CF Card Storage Capacity About 1 hour About 2 hours About 4 hours (This table is only for reference.
Erase All All files saved in built-in memory or CF Card will be deleted. (A VI, JPEG, or W A V) (1) Rotate (MENU control) to highlight . (2) Press and starts blinking. (3) Press again to confirm. 18 Steps: LCD Preview Other Functions Self-timer Steps: (1) Rotate (MENU control) to highlight .
19 Other Functions Gently insert CF Card to CF Card Slot. Do not force. Ensure CF Card is completely inserted. Format CF Card Select on the LCD display to format the CF Card. (See P .9 for more on the Mode Selecting. ) Do not eject CF Card while the camera is processing data.
20 Power When not using your camera for extended periods, we suggest you remove the batteries. on the LCD display indicates low battery . Y our taken pictures or A VI movies will be stored in the built-in SDRAM if a CF card is not inserted to the camera.
For Best Results Keep the focus set to except for extreme close-ups. Make sure your subject is well lit from the front. Keep the camera level and steady when releasing the shutter . Make sure you have adequate light when taking still pictures or movies.
A/V out Mode TV A/V out Mode Audio V ideo 22 A/V out mode Connect your camera and TV via A/V out cable for real time display , and you can share recorded A VI Movies and pictures with your family and friends. Step1 Step2 A/ V A/ V (1) T urn on your TV and switch TV mode to A V -in mode.
TV Playback MENU Press and TV MENU will appear while camera successfully enters A/V out mode. Rotate (MENU control) up or down to shift between modes. Press to select mode.
Bundled Software Mega DV Manager and other bundled software packages Mega DV Manager is your camera's driver as well as basic operating software. Y our camera also comes bundled with the following video and image processing software. For more information, see each application's help file or visit the supplier's website.
Software Installation Installing the Mega DV Manager (1) Insert the CD-ROM in your CD drive. The installation menu should open automatically . (2) (3) Follow the onscreen instructions to complete Installation. (5) icon will appear on PC desktop after Installation.
Hardware Installation Connect the smaller end of the USB cable to the USB port of your camera. Plug the larger end of the USB cable to the USB port of your PC. USB Hardware Installation 26 Software installation must be completed before hardware installation.
Hardware Installation Hardware Installation 27 (1) Installing " USB Mass Storage Device " Driver: Y our PC will automatically install " USB Mass Storage Device" driver and complete " removable disk " installation. Y our PC will add a " removable disk " under " My computer" icon.
Fig 1 (1) Installing " USB Mass Storage Device " Driver: 1-1 Please follow the onscreen instructions to complete " Removable disk " installation. Y our PC will add a " removable disk " under " My computer" icon.
29 Downloading Files from Camera to Y our PC DV Disk Y our camera can also serve as removable hard disk and allows you to download files from camera to your PC. Downloading Files from Camera to Y our PC DV Disk LIVE DV Disk Mode Fig 1 Note: Y our camera supports two kinds of memory storage: Built- in memory and CF Card.
Video Conference V ideo Conference LIVE Mode When using video conferencing camera to capture image, please follow the instructions. Steps: 1. Rotate (MENU control) to and press again.
31 Preview Window Record a video clip Stop recording Snapshot Set image size Source Preview or stop preview window Settings C:/ Program Files /Mega DV Manager/ Work T emp Files captured in Live mode a.
32 Set Image Size Color Space Output Size - RGB 24: better image quality - I420: faster speed Select one of the following functions when you have different needs. Setting output size can change the size of the preview window . The default size is 320x240.
Video Conference 33 Set Source Video Setting Custom Video Pro Amp - Banding Filter: When your PC screen flickers, please change the banding filter in Video Setting. The refresh rate (the number of times the screen is redrawn per second) is the most likely cause of flicker .
34 Set Settings Y our camera has default flicker settings. If pictures in DV Disk mode appear unnatural flickering noise, please select "Cancel Flicker" in the setting dialog.
T roubleshooting T roubleshooting Symptom Actions TV doesn't show TV preview after A V -out cable is connected. Change A V -out port. Insert white cable to audio port and yellow one to video port. Cannot turn on your camera. Press the MENU control for 3 seconds.
AIPTEK Service 36 AIPTEK Service AIPTEK International GmbH AIPTEK Int'l., Inc. HalskestraBe 6 47877 Willich, Germany TEL +49 21 54 - 92 35 50 Fax +49 21 54 - 92 35 68 http://www .aiptek.de No. 5-1 Innovation Road I Science-Based Industrial Park Hsin-Chu 300 T aiwan, R.
82-140-91020v3.1.
Ein wichtiger Punkt beim Kauf des Geräts Aiptek Pocket DV2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aiptek Pocket DV2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aiptek Pocket DV2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aiptek Pocket DV2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aiptek Pocket DV2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aiptek Pocket DV2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aiptek Pocket DV2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aiptek Pocket DV2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aiptek Pocket DV2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
