Benutzeranleitung / Produktwartung 615 des Produzenten Compaq
Zur Seite of 154
Compaq 6 1 5 Notebook P C Compaq 6 1 0 Notebook P C Maintenance and Se r v i ce Guide Doc ument P art Number: 5 3 3 50 4 -00 1 June 2 009 This guide is a troubleshooting reference used for ma intaining and servicing the computer .
© Copyright 2009 He wlett-Packard De velopment Compan y , L.P . AMD Athlon, AMD A TI Radeon, AMD Sempron, and AMD T urion are trad emarks of Advanced Micro De vices, Inc. Bluetooth is a trademark owned b y its proprietor and used by He wlett-Packard Co mpan y under license.
Safety warning notice Å WA R N I N G : T o reduce the pos sibility of heat-relat ed injur ies or o f ov erheating the computer , do no t place the computer dir ectly on you r l ap o r o b st ru ct t h e c o mp u te r ai r ve nt s. Us e th e c om pu t er o nl y o n a h a rd, fl a t s u r fa c e.
Maintenance and Se rvice Gui de iv Contents 1 Product description 2 External component identification Top components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Maintenance and Serv ice Guide Cont ent s Keyboard and switch cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–20 Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cont ent s Maintenance and Se rvice Gui de vi 7 Screw listing Phillips PM2.0×6.0 captive screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1 Phillips PM2.5×11.0 captive screw . .
vii Maintenance and Service Gui de Cont ent s 10 Power cord set requirements Requirements for all countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–1 Requirements for specific countries and regions .
Maintenance and Se rvice Gui de 1–1 1 Pr oduc t desc ription Category Description Compaq 615 Notebook PC Compaq 610 Notebook PC Product Name Compaq 615 Notebook PC x Compaq 610 Notebook PC x Processor s AMD® processor s: ■ T urion™ RM-74 2.20-GHz processor , 1-MB L2 Cache ■ T urion RM-72 2.
1–2 Maintenance and Serv ice Guide Produc t desc ripti on Graphics AMD M92S2-LP (A TI Mobile Radeon™ HD 4330) discrete graphics with Hyper memor y suppor t, 256 MB DDR2 (64 MB × 16 × 2) xx AMD U.
Pr oduct desc ripti on Maintenance and Se rvice Gui de 1–3 Memory (continued) Suppor ts the follo wing configurations at 667 MHz: ■ 4096-MB total system memor y (2048 × 2, dual-channel, only on G.
1–4 Maintenance and Serv ice Guide Produc t desc ripti on Modem 56k, v .92 data/f ax modem x x Suppor ts no modem option x x F or use in Brazil x Ethernet Marvell 88E8042 10/100 network interface ca.
Pr oduct desc ripti on Maintenance and Se rvice Gui de 1–5 Po r t s Audio-in (mono microphone) x x A udio-out (stereo headphone) x Multi-pin A C power x x RJ-45 (Ethernet, includes link and activity lights) xx RJ-11 (modem) x x USB v .
1–6 Maintenance and Serv ice Guide Produc t desc ripti on Operating system (continued) Preinstalled with MS Office (continued): ■ Windows Vista Business (32 bit, with Windows XP Pro images) with O.
2–1 2 External component identification T op components Displa y components Item Component Description (1) Wireless antennas (select models only) On select computer models, at least 2 antennas send and receiv e signals from one or more wireless de vices.
2–2 Maintenance and Serv ice Guide External co mponent i dentif icatio n (4) Speaker Produces sound. (5) A udio-out (headphone) jack Produces sound when connecte d to optional pow ered stereo speakers , headphones, ear b uds, a head set, or tele vision audio .
External component identification Maintenance and Se rvice Gui de 2–3 Buttons, sw itch, and speak er Item Component Description (1) Internal display s witch T urns off the display if the panel lid is closed while the power is on. (2) Wireless button T urn s the wireless f eature on or off but does not estab lish a wireless connection.
2–4 Maintenance and Serv ice Guide External co mponent i dentif icatio n Keys Item Component Description (1) esc ke y Display s system info r mation when pressed in comb ination with the fn key . (2) fn ke y Ex ecutes frequently used system func tions when pressed in combination with a function ke y or the esc key .
External component identification Maintenance and Se rvice Gui de 2–5 Lig h t s Item Component Description (1) Caps lock light On: Caps lock is on. (2) Wireless light ■ Blue: An integrated wireless de vice , su ch as a wireless local area network (WLAN) de vice and/or a Bluetooth® device , is on.
2–6 Maintenance and Serv ice Guide External co mponent i dentif icatio n Po i n t i n g d e v i c e s Item Component Description (1) T ouchP ad* Mov es the pointer and select s or activates items on the screen. (2) Left T ouchP ad button* Functions like th e left b utton on an e xter nal mouse.
External component identification Maintenance and Se rvice Gui de 2–7 Fr ont compon ents Item Component Description (1) A udio-out (headphone) jack Produc es sound when connec ted to optional pow ered stereo speakers , headphones, ear b uds, a head set, or tele vision audio .
2–8 Maintenance and Serv ice Guide External co mponent i dentif icatio n Right-side components Item Component Description (1) Optical drive Reads optical discs and, on se lect models, also writes to optical discs. (2) Optical drive light Blinking: The optical drive is being accessed.
External component identification Maintenance and Se rvice Gui de 2–9 Left-side components Item Component Description (1) ExpressCard slot Suppor ts optional ExpressCards. (2) RJ-11 (modem) jack (select models only) Connects a modem cable . (3) V ent Enables airflo w to cool internal components.
2–1 0 Maintenance and Servi ce Guide External co mponent i dentif icatio n Bottom components Item Component Description (1) Batter y ba y Holds the batter y . (2) Batter y release latches (2) Release the batter y from the batter y ba y . (3) V ents (4) Enable airflo w to cool internal components.
Maintenance and Se rvice Gui de 3–1 3 Illustrated parts catalog Ser vice tag When ordering parts or requesting information, provide the computer serial number and model number pro vided on the service tag. Item Component Description 1 Product name This is the product name a ffix ed to the front of the computer .
3–2 Maintenance and Serv ice Guide Illustr ated parts catalog Computer major components.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–3 Item Description Spare P art Number (1) 15.6-in, SV A, HD display assembl y (includes 2 WLAN antenna transceiv ers and cab les, namepla.
3–4 Maintenance and Serv ice Guide Illustr ated parts catalog (3) Ke yboard (includes k eyboard cab le): ■ F or use in P or tugal 539682-131 ■ F or use in Russia 539682-251 ■ F or use in Saudi.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–5 Cable Kit , includes: 538465-001 (9a) Bluetooth module cable (9b) Modem module cable (includes RJ-11 connector) (10) Bluetooth module F.
3–6 Maintenance and Serv ice Guide Illustr ated parts catalog (17) Battery: F or use only on computer models equipped with an AMD processor : ■ 8-cell, 2.55-Ah (63-Wh) Li-ion batter y 572188-001 ■ 6-cell, 2.20-Ah (47-Wh) Li-ion batter y 572187-001 F or use only on computer models equipped with an Intel processor : ■ 8-cell, 2.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–7 (18) WLAN module: 802.11a/b/g WLAN modules for use on all computer models: ■ Broadcom 4312G 802.11a/b/g WLAN module fo r use in Canada, the Ca yman Islands, Guam, Puer to Rico , the United States, and the U .
3–8 Maintenance and Serv ice Guide Illustr ated parts catalog (19) Hard drive (includes hard drive connector and hard drive brac ket): F or use only on computer models equipped with an AMD processor.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–9 Displa y assembl y subcomponents Item Description Spare part number (1) Display bezel Fo r use only on computer models equipped with a .
3–1 0 Maintenance and Servi ce Guide Illustr ated parts catalog Mass storage d e vices.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–1 1 Item Description Spare par t number (1) Hard drive (includes hard drive connector and hard driv e brac ket): Fo r use only on compute.
3–1 2 Maint enance and Servi ce Guide Illustr ated parts catalog P lastics Kit Item Description Spare part number Plastics Kit: 538450-001 (1) ExpressCard slot bezel (2) Wireless module co mpar tmen.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–1 3 Miscellan eous parts Description Spare part number AC a d a p t e rs : ■ 90-W PFC HP Smar t Adapter (for use only on computer model.
3–1 4 Maintenance and Service Gui de Illustr ated parts catalog Sequential part number listing Spare part number Description 398393-002 Full-siz ed Bluetooth module ✎ The Bluetooth module spar e part kits do not include a Blue tooth module cable. The Bluetooth module cables are include d in the Cable Kit, spare part number 538465-001.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–1 5 504593-003 Broadcom 4312G 802.11a/b/g WLAN module for use in Canada, the Ca yman Islands, Guam, Puer to Rico , the United States, and the U .S. Virgin Islands 504593-004 Broadcom 4312G 802.
3–1 6 Mainte nance and Servi ce Guide Illustr ated parts catalog 518434-002 Broadcom 4322A GN 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–1 7 538406-001 D VD±RW and CD-R W SuperMulti Double-La yer Drive with LightScribe for use only on computer models equipped with an AMD p.
3–1 8 Maintenance and S ervice Gui de Illustr ated parts catalog 538445-001 Base enclosure (includes se ven rubber f eet) 538447-001 T op co ver (includes T ouchP ad on/off boar d and cable, T ouchP.
Illustr ated parts catalog Maintenance and Se rvice Gui de 3–1 9 539682-231 K eyboard f or use in Sl ov akia (includes k eyboard cab le) 539682-251 K eyboard f or use in Russia (includes ke yboard c.
3–20 Maintenance and Serv ice Guide Illustr ated parts catalog 575200-001 D VD-ROM Drive f or use only on computer mode ls equipped with an AMD processor (includes bezel and brac ket) 576207-001 Intel Celeron 550 2.00-G Hz processor (1-MB L2 cache , 53 3-MHz FSB, includes replacement ther mal material) 576208-001 Intel Celeron 560 2.
Maintenance and Se rvice Gui de 4–1 4 Remo val and r eplacement pr ocedures Preliminary r eplacement requir ements To o l s r e q u i r e d Y ou will need the follo wing tools to complete the remov .
4–2 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es Dri ve handling Ä CAUT ION: Dri ve s are f r agile components that m ust be handled w i th car e .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–3 The follo wing table shows ho w humidity affects the electrost atic voltage le v els generated by dif ferent acti vities. Ä CAUT ION: A product can be degr aded by as little as 7 00 V .
4–4 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es W orkstation guidelin es Follo w these grounding workstation guidelines: ■ Cov er the workstation with appro ved static-shielding material. ■ Use a wrist strap connected to a properly grounded work surf ace and use properly grounded tools and equipment.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–5 Component replacement pr ocedures This chapter provides remo v al and replacement procedures. There are as many as 76 scre ws, in 15 di f ferent sizes, that must be remo ved, replaced, or loosened when servicing the computer .
4–6 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es Computer feet The computer feet are adhesi ve-backed rubber pads. The f eet are included in the Rubber Kit, spare part number 538448-001. There are 7 rubber feet that attach to th e base enclosure in the locations illustrated belo w .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–7 Remov e the battery: 1. T urn the computer upside down on a flat surface, with the battery bay to w ard you. 2. Slide the battery release latches 1 to release the battery . 3.
4–8 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es Har d dr iv e ✎ The hard dri ve spare part kit includes a hard dri ve connector and hard dri ve bracket. Before removing the hard dri v e, follow these steps: 1. Shut do wn the computer .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–9 Remov e the hard dri ve: 1. Position the computer with the front to ward you. 2. Loosen the two Phillips PM2.0×6.0 capti ve scre ws 1 that secure the hard dri ve co ver to the computer .
4–1 0 Maintenance and Servi ce Guide Remo val and replace ment pr ocedur es 5. Loosen the Phillips PM2.5×11.0 capti ve scre w 1 that secures the hard dri ve in the hard dri v e bay . 6. Grasp the Mylar tab 2 on the hard dri ve and slide the hard dri v e 3 to the left.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–1 1 8. If it is necessary to replace the hard dri ve bracket, follo w these steps: a. Remov e the two Phillips PM3.0×4.0 scre ws 1 from each side of the hard dri ve. b . Lift the bracket 2 straight up to remo ve it from the hard dri v e.
4–1 2 Maint enance and Servi ce Guide Remo val and replace ment pr ocedur es WLAN modul e Description Spare part number 802.11a/b/g/n WLAN module for use with all computer models: ■ Broadcom 4322A GN 802.11a/b/g/n WLAN modul e for use in Canada, the Ca yman Islands, Guam, Puer to Rico , the United Stat es, and the U .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–1 3 802.11a/b/g WLAN modules for use on all computer models: ■ Broadcom 4312G 802.11a/b/g WLAN module f or us e in Canada, the Cayman Islands , Guam, Puer to Rico , the United States, and the U .
4–1 4 Maintenance and Service Gui de Remo val and replace ment pr ocedur es Before removing the WLAN module, follo w these steps: 1. Shut do wn the computer . If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–1 5 4. Disconnect the WLAN antenna cables 1 from the terminals on the WLAN module. ✎ The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN antenna cable is connected to the WLAN module “Aux” terminal.
4–1 6 Mainte nance and Servi ce Guide Remo val and replace ment pr ocedur es Memor y module Before removing the memory module, follo w these steps: 1. Shut do wn the computer . If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–1 7 Remov e the memory module: ✎ The top memory module slot is for expansion memo ry and the bottom slot is for primary memory . 1. Position the computer with the front to ward you.
4–1 8 Maintenance and S ervice Gui de Remo val and replace ment pr ocedur es Optical dri ve ✎ The optical dri ve spare part kit includes an optical dri ve bezel and brack et. Before removing the optical dri ve, follo w these steps: 1. Shut do wn the computer .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–1 9 5. If it is necessary to replace the optical dri ve bracket, follo w these steps: a. Position the optical dri ve with the rear to ward you. b . Remov e the two Phillips PM2.
4–20 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es Keyb o a r d a n d sw i t c h c ov e r For use in country or region: Spare part number For use in country or region: Spare .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–2 1 Before removing the k eyboard and switch co ver , follow these steps: 1. Shut do wn the computer . If you are unsure whether the com puter is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
4–2 2 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es 3. T urn the computer display-side up with the front toward you. 4. Open the computer as far as possible. 5. Lift the rear edge 1 of the switch cov er until it rests at an angle.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–2 3 9. Release the zero insertion force (ZIF) connector 1 to which the ke yboard cable is attached, and disconnect the ke yboard cable 2 from the system board. 10. Remov e the ke yboard.
4–2 4 Maintenance and Servi ce Guide Remo val and replace ment pr ocedur es Speak er Before removing the speak er , follo w these steps: 1. Shut do wn the computer . If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–2 5 Displa y assembly Before removing the display assembly , follow these steps: 1. Shut do wn the computer . If you are unsure whether the com puter is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
4–2 6 Maintenance and Service Gui de Remo val and replace ment pr ocedur es Remov e the display assembly: 1. Close the computer . 2. T urn the computer upside down with the front to ward you. 3. Remov e the WLAN antenna cables 1 from the clip 2 built into the base enclosure.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–2 7 8. Disconnect the webcam module cable 1 from the system board. 9. Remov e the wireless antenna cables 2 and the microphone cable from the clips 3 and routing channel built into the top cov er .
4–2 8 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es 12. If it is necessary to replace the display bezel or any of the display assembly internal components, remo ve the eight rubber scre w cove rs 1 and 2 and the eight Phillips PM2.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–2 9 15. If it is necessary to replace the webc am module, release the webcam module 1 as far from the display enclosure as the webcam module cable allo ws. 16. Disconnect the webcam module cable 2 from the webcam module.
4–30 Maintenance and S ervice Gui de Remo val and replace ment pr ocedur es 20. If it is necessary to replace the display hing es, remov e the eight Phillips PM2.0×3.0 screws 1 that secure the hinges to the display panel. 21. Remov e the display hinges 2 .
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–3 1 26. If it is necessary to replace the webcam module cable, release the tabs 1 built into the display enclosure shielding. 27. Remov e the webcam module cable 2 . The webcam module cable is included in the Display Cable Kit, spare part number 538463-001.
4–3 2 Maintenance and Service Guid e Remo val and replace ment pr ocedur es To p c o v e r Before removing the top co ver , follow these steps: 1. Shut do wn the computer . If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–3 3 3. T urn the computer right-side up with the front toward you. 4. Remov e the two Phillips PM2.5×6.0 scre ws 1 and the Phillips PM2.0×4.0 scre w 2 that secure the top cov er to the base enclosure.
4–34 Mainte nance and Servi ce Guide Remo val and replace ment pr ocedur es Bluetooth module ✎ The Bluetooth module spare part kits do not include a Bl uetooth module cable. The Bluetooth module cables are included in the Cable Kit, spare part number 538465-001.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–3 5 S y stem boar d and optical dri ve connector board ✎ The system board spare part kit includes replacement thermal material. Before removing the system board, follo w these steps: 1.
4–3 6 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es Remov e the system board: 1. Disconnect the fan cable 1 from the system board. 2. Remov e the Phillips PM2.5×4.0 scre w 2 that secures the system board to the base enclosure.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–3 7 Ä CAUT ION: Do not attempt to r emo v e the optical dr iv e connecto r boar d until after the s y stem boar d has been r emo v ed fr om the ba se e ncl os ure.
4–38 Maint enance and Servi ce Guide Remo val and replace ment pr ocedur es Fa n ✎ T o properly ventilate the computer , allo w at least a 7.6-cm (3-in) clearance on the left side of the computer . The computer uses an electric fan for v entilation.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–3 9 Remov e the fan: 1. Remov e the two Phillips PM2.5×6.0 scre ws 1 that secure the fan to the base enclosure. 2. Remov e the fan 2 . Re verse this procedure to install the fan.
4–40 Maintenance and S ervice Gui de Remo val and replace ment pr ocedur es RT C b at te r y Before removing the R TC battery , follo w these steps: 1. Shut do wn the computer . If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it do wn through the operating system.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–4 1 Remov e the R TC battery: 1. T urn the system board upside down with the front to ward you. 2. Remov e the R TC battery from the socket on the system board. Re verse this procedure to install the R TC battery .
4–4 2 Maintenance and Service Gui de Remo val and replace ment pr ocedur es Modem m odu le ✎ The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 538465-001. See “Modem module cable” on page 4-48 for modem module cable remov al information.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–4 3 Remov e the modem module: 1. T urn the system board upside down with the front to ward you. 2. Remov e the two Phillips PM2.5×4.0 scre ws 1 that secure the modem module to the system board.
4–44 Maintenance and Serv ice Guide Remo val and replace ment pr ocedur es Heat si nk ✎ The heat sink spare part kit includes replacement thermal material.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–4 5 Remov e the heat sink: 1. T urn the system board upside down with the front to ward you. ✎ Steps 2 and 3 apply to computer models equipped with gr aphics subsystems with discrete memory .
4–46 Mainte nance and Servi ce Guide Remo val and replace ment pr ocedur es ✎ The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board each time the heat sink is remov ed: ■ Thermal paste is used on the processor 1 and the heat sink section 2 that services it.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–4 7 ✎ The thermal material must be thoroughly cleaned from the surf aces of the heat sink and the system board each time the heat sink is remov ed: ■ Thermal paste is used on the processor 1 and the heat sink section 2 that services it.
4–48 Maint enance and Servi ce Guide Remo val and replace ment pr ocedur es Modem m odu le ca ble ✎ The modem module cable is included in th e Cable Kit, spare part number 538465-001. Before removing the modem module cable, follo w these steps: 1.
Remo val and replacemen t procedur es Maintenance and Se rvice Gui de 4–4 9 Processor ✎ The processor spare part kit includes replacement thermal material.
4–50 Maint enance and Servi ce Guide Remo val and replace ment pr ocedur es Remov e the processor: 1. Use a flat-bladed scre wdriv er to turn the processor locking scre w 1 one-half turn counterclockwise until you hear a click. 2. Lift the processor 2 straight up and remov e it.
Maintenance and Se rvice Gui de 5–1 5 Computer Setup Computer Setup for computer models equipped w ith an AMD processor Starting Computer Setup Computer Setup is a preinstalled, R OM-based utility that can be used e ven when the operating system is not working or will not load.
5–2 Maintenance and Serv ice Guide Comp ute r Se tu p T o exit Computer Setup menus, choose one of the following methods: ■ T o exit Computer Setup menus without saving your changes, click the Exit icon in the lower -left corner of the screen, and then follo w the on-screen instructions.
Comp ute r Se tu p Maintenance and Se rvice Gui de 5–3 Computer Setup menus The menu tables in this section provide an o vervie w of Computer Setup options. ✎ Some of the Computer Setup menu items listed in th is chapter may not be supported by your computer .
5–4 Maintenance and Serv ice Guide Comp ute r Se tu p Security M enu ✎ Some of the menu items listed in this se ction may not be supported by your computer . Diagnostics M enu Select T o do this Setup BIOS Administrator P ass word Se t up a BIOS administrator pass word.
Comp ute r Se tu p Maintenance and Se rvice Gui de 5–5 S y stem Configur ation Menu ✎ Some of the listed System Configuration options may not be supported b y your computer . Select T o do this Language Change the Co mputer Setup language. Boot Options ■ Set a Startup Menu delay (in seconds).
5–6 Maintenance and Serv ice Guide Comp ute r Se tu p System Configuration menu (continued) Built-In De vice Options ■ Enable/disab le the wireless button state (enab led by def ault). ■ Enable/disab le embedded Blueto oth de vice radio (enab led by def ault).
Comp ute r Se tu p Maintenance and Se rvice Gui de 5–7 Computer Setup for computer models equipped w ith an Intel processor Starting Computer Setup Computer Setup is a preinstalled, R OM-based utility that can be used e ven when the operating system is not working or will not load.
5–8 Maintenance and Serv ice Guide Comp ute r Se tu p Restor ing factory set tings in Computer Setup T o return all settings in Computer Setup to the v alues that were set at the factory , follow these steps: 1.
Comp ute r Se tu p Maintenance and Se rvice Gui de 5–9 Security M enu ✎ Some of the menu items listed in this se ction may not be supported by your computer . Diagnostics M enu Select T o do this Setup P ass word Enter , change, or delete a setup pass word.
5–1 0 Maintenance and Servi ce Guide Comp ute r Se tu p S y stem Configur ation Menu ✎ Some of the listed System Configuration options may not be supported b y your computer . Select T o do this Language (or press f2 ) Change the Computer Setup language.
Maintenance and Se rvice Gui de 6–1 6 Specifications Computer specifications Metric U .S. Dimensions Length 25.43 cm 10.01 in Width 37.18 cm 14.64 in Height 3.20 cm 1.26 in W eight 2.49 kg 5.5 lbs Input power Operating v oltage 19.0 V dc @ 4.74 A - 65 W Operating current 4.
6–2 Maintenance and Serv ice Guide Spe cificat ions 1 5 .6 -in displa y specifications Metric U .S. Dimensions Height 21.1 cm 8.3 in Width 33.5 cm 13.2 in Diagonal 39.6 cm 15.6 in Number of colors Up to 16.8 million Contrast ratio 250:1 (typical) Brightness 200 nits (typical) Pixel resolution Pitch 0.
Spe cificat ions Maintenance and Se rvice Gui de 6–3 Hard dr i ve specifications 500-GB* 320-GB* 250-GB* 160-GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm 9.
6–4 Maintenance and Serv ice Guide Spe cificat ions D VD±RW and CD-R W SuperM ulti Doubl e -La y er Dri v e specifications Applicable disc Read: Write: CD-D A, CD+(E)G, CD-MIDI, CD-TEXT , CD-ROM, C.
Spe cificat ions Maintenance and Se rvice Gui de 6–5 D VD-ROM Dri ve specifications S ystem DMA specifications Applicable disc Read: Write: CD-D A, CD+(E)G, CD-MIDI, CD-TEXT , CD-ROM, CD-ROM XA, MIX.
6–6 Maintenance and Serv ice Guide Spe cificat ions S ystem memory map spec ifications S ystem interr upt specifications Size Memory address System function 640 KB 00000000-0009FFFF Base memor y 128.
Spe cificat ions Maintenance and Se rvice Gui de 6–7 S ystem I/O addr ess specifications I/O address (hex) System function (shipping configuration) 000 - 01F DMA controller 020 - 021 Program interru.
6–8 Maintenance and Serv ice Guide Spe cificat ions 0C0- 0DF Direct memo r y access controller 0F0- 0F0 Numeric data processor 0200-027F Motherboard resources 3B0-3BB Mobile Intel 4 series express c.
Maintenance and Se rvice Gui de 7–1 7 Scre w listing This section provides specif ication and reference inform ation for the scre ws used in the computer . The scre ws listed in this section are av ailable in the Screw Kit, spare part number 538449-001.
7–2 Maintenance and Serv ice Guide Scr ew list ing Phillips P M2 .5×1 1 .0 capti ve scre w Where used: One scre w that secures the hard drive to the com puter (scre w is secured to the hard dri ve brack et) Color Quantity Length Thread Head diameter Black 1 11.
Scr ew listi ng Maintenance and Se rvice Gui de 7–3 Phillips P M3 . 0×4. 0 sc r ew Where used: 4 scre ws that secure the hard drive brack et to the hard dri ve Color Quantity Length Thread Head diameter Silver 4 4.
7–4 Maintenance and Serv ice Guide Scr ew list ing Phillips P M2 .5×4. 0 scre w Where used: 2 scre ws that secures the WLAN module to the computer Where used: 2 scre ws that secure the speaker to the top cover Color Quantity Length Thread Head diameter Black 9 4.
Scr ew listi ng Maintenance and Se rvice Gui de 7–5 Where used: 1 One scre w that secures the system board to the base enclosure 2 T wo screws that secure the optical dri v e connector board to the .
7–6 Maintenance and Serv ice Guide Scr ew list ing Phillips P M2 .5×4. 0 scre w Where used: 2 scre ws that secure the wireless antenna transceivers to the display enclosure Color Quantity Length Thread Head diameter Silver 2 4.
Scr ew listi ng Maintenance and Se rvice Gui de 7–7 Slotted T or x T8M2.5×8. 0 sc re w Where used: 1 T wo screws that secure the switch co ver to the computer 2 Six scre ws that secure the top cov er to the computer Color Quantity Length Thread Head diameter Black 8 8.
7–8 Maintenance and Serv ice Guide Scr ew list ing Phillips P M2. 0×3. 0 scre w Where used: 2 scre ws that secure the optical drive brack et to the optical driv e Where used: 2 scre ws that secure the Blueto oth module to the base enclosure Color Quantity Length Thread Head diameter Black or silv er 4 3.
Scr ew listi ng Maintenance and Se rvice Gui de 7–9 Phillips P M2. 0×3. 0 scre w Where used: 8 scre ws that secure the disp lay hinges to the display panel Color Quantity Length Thread Head diameter Silver 8 3.
7–1 0 Maintenance and Servi ce Guide Scr ew list ing Phillips P M2 . 0×2. 0 br oadhead sc re w Where used: 3 scre ws that secure the switch cove r to the computer in the battery bay Color Quantity Length Thread Head diameter Black 3 2.0 mm 2.0 mm 7.
Scr ew listi ng Maintenance and Se rvice Gui de 7–1 1 Phillips P M2 . 0×3. 0 broadhead sc re w Where used: 3 scre ws that secure the top cover to the computer in the optical dri ve bay Color Quantity Length Thread Head diameter Black 3 3.0 mm 2.0 mm 7.
7–1 2 Maint enance and Servi ce Guide Scr ew list ing Phillips P M2 .5×8. 0 scre w Where used: 1 One scre w that secures the optical driv e to the computer 2 T wo screws that secure the k eyboard to the computer Color Quantity Length Thread Head diameter Black 3 8.
Scr ew listi ng Maintenance and Se rvice Gui de 7–1 3 Phillips P M2 . 0×4. 0 sc re w Where used: One scre w that secures the top cover to the base enclosure Color Quantity Length Thread Head diameter Black 1 4.
7–1 4 Maintenance and Service Gui de Scr ew list ing Phillips P M2 .5×6 . 0 scre w Where used: 4 scre ws that secure the display assembly to the computer Where used: 8 scre ws that secure the displa y bezel to the display assembly Color Quantity Length Thread Head diameter Black 16 6.
Scr ew listi ng Maintenance and Se rvice Gui de 7–1 5 Where used: 2 scre ws that secure the top cover to the base enclosure Where used: 2 scre ws that secure the fan to the base enclosure.
7–1 6 Mainte nance and Servi ce Guide Scr ew list ing Phillips P M2. 5×5 . 0 scre w Where used: 4 scre ws that secure the displa y panel to the display enclosure Color Quantity Length Thread Head diameter Black 4 5.
Scr ew listi ng Maintenance and Se rvice Gui de 7–1 7 Phillips P M2 .5×9 .0 capti ve scre w Where used: 4 capti v e scre ws that secure the heat sink to the system board on computer models with a graphics subsystem with discrete memory (scre ws are secured on the heat sink by C-clips) Color Quantity Length Thread Head diameter Silver 4 9.
7–1 8 Maintenance and S ervice Gui de Scr ew list ing Where used: 4 capti v e scre ws that secure the heat sink to the system board on computer models with a graphics subsystem with UMA memory (scre.
Scr ew listi ng Maintenance and Se rvice Gui de 7–1 9 Phillips P M2 . 0×5 . 0 captiv e scre w Where used: 2 capti v e scre ws that secure the heat sink to the system board on computer models with a graphics subsystem with discrete memory (scre ws are secured on the heat sink by C-clips) Color Quantity Length Thread Head diameter Silver 2 5.
7–20 Maintenance and Serv ice Guide Scr ew list ing Where used: 2 capti v e scre ws that secure the heat sink to the system board on computer models with a graphics subsystem with UMA memory (scre w.
Maintenance and Se rvice Gui de 8–1 8 Bac k up and r eco v ery Bac k up and r ecov ery in Windo ws Vista Overvie w T o protect your information, use the Backup and Restore Ce nter to back up individual f iles and folders, back up your entire hard dri ve (select models only), or create system restore points.
8–2 Maintenance and Serv ice Guide Back up and r ecov ery Bac king up y our infor mation Recov ery after a system failure is as complete as your most current backup.
Back up and r eco v ery Maintenance and Se rvice Gui de 8–3 Pe r f o r m i n g a r e c o v e r y In case of system failure or instability , the computer pro vides the following tools to reco ver your f iles: ■ W indo ws reco very tools: Y ou can use the Backup and Restore Center to reco v er information you hav e pre viously backed up.
8–4 Maintenance and Serv ice Guide Back up and r ecov ery Using f1 1 Ä CAUT ION: Usi ng f11 completel y er ases har d dr iv e conte nts and r efo rmats the har d dri v e . All file s yo u hav e cr eated and an y softwar e installed on the com puter ar e permanentl y r emo ved .
Back up and r eco v ery Maintenance and Se rvice Gui de 8–5 Bac k up and r ecov ery in Windo ws XP Overvie w T o protect your information, use the Windo ws Backup utility (select models only) to back up files and folders or create recov ery points. In case of system failure, you can use the backup f iles to restore your computer .
8–6 Maintenance and Serv ice Guide Back up and r ecov ery Pe r f o r m i n g a r e c o v e r y In case of system failure or instability , the computer pro vides the following tools to reco ver your .
Maintenance and Se rvice Gui de 9–1 9 Connec tor pin assignments Audio -in (microphone) Audio-out (h eadphone) Pin Signal 1 Audio signal in 2 Audio signal in 3G r o u n d Pin Signal 1 Audio out, lef.
9–2 Maintenance and Serv ice Guide Connec tor pin as signments External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5G r o u n d 6 Ground analog 7 Ground analog 8 Gr.
Connec tor pin as signments Maintenance and Se rvice Gui de 9–3 RJ- 1 1 (modem) RJ- 45 (network) Pin Signal 1 Unused 2T i p 3R i n g 4 Unused 5 Unused 6 Unused 7 Unused 8 Unused Pin Signal 1T r a n .
9–4 Maintenance and Serv ice Guide Connec tor pin as signments Univ ersal Serial Bus Pin Signal 1+ 5 V D C 2D a t a 3 Data + 4G r o u n d.
Maintenance and Se rvice Gui de 10 – 1 10 P o w er cor d set r equirements The wide range input feature of the co mputer permits it to operate from any line voltage from 100 to 120 v olts A C or from 220 to 240 volts A C.
10 – 2 Maintenance and Serv ice Guide P ower c ord s e t re q u i rem e nt s Requir ements f or specific countries and r egions Country/region Accredited agency Applicable note number A ustralia EAN.
Maintenance and Se rvice Gui de 11 – 1 11 Rec yc li n g Batter y When a battery has reached the end of its useful life, do not dispose of th e battery in general household waste. Follo w the local la ws and regulations in your area for computer battery disposal.
11 – 2 Maintenance and Serv ice Guide Recycl i ng Perform the follo wing steps to disassemble the display assembly: 1. Remov e all scre w cov ers 1 and scre ws 2 that secure the display b ezel to the display assembly .
Recycl i ng Maintenance and Se rvice Gui de 11 – 3 4. Disconnect all display panel cables 1 from the display in v erter and remove the in ve rter 2 . 5. Remov e all scre ws 1 that secure the display panel a ssembly to the display enclosure. 6. Remov e the display panel assembly 2 from the display enclosure.
11 – 4 Maintenance and Serv ice Guide Recycl i ng 9. Use a sharp-edged tool to cut the tape 1 that secures the sides of the disp lay panel to the display panel frame. 10. Remov e the display panel frame 2 from the display panel. 11. Remov e the scre ws 1 that secure the backlight cov er to the display panel.
Recycl i ng Maintenance and Se rvice Gui de 11 – 5 16. T urn the display panel upside down. 17. Remov e the backlight frame from the display panel. Å WA R N I N G : The bac klight con tains mer c ury . Exer c ise cauti on w hen re mov ing and handling the bac klight to a vo id damaging this component and cau sing exposur e to the mer c ury .
11 – 6 Maintenance and Serv ice Guide Recycl i ng 19. Disconnect the display cable 1 from the LCD panel. 20. Remov e the scre ws 2 that secure the LCD panel to the display rear panel. 21. Release the LCD panel 3 from the display rear panel. 22. Release the tape 4 that secures the LCD panel to the display rear panel.
Maintenance and Se rvice Gui de Index–1 Inde x A AC adapter, spare part numbers 3–13 , 3–14 antenna disconnecting 4–15 locations 2–1 removal 4–31 spare part number 4–31 audio product des.
Inde x–2 Maintenance and Servi ce Guide Index RJ-11 jack 9–3 RJ-45 jack 9–3 USB port 9–4 connectors, service considerations 4–1 creating a backup 8–2 D device configurations 5–5 Diagnost.
Inde x Maintenance and Se rvice Gui de Index–3 hinge illustrated 3–9 removal 4–29 , 4–30 spare part number 3–9 , 3–18 , 4–30 HP SpareKey Enrollment 5–4 I internal display switch 2–3 .
Inde x–4 Maintenance and Servi ce Guide Index pointing device components 2–6 illustrated 2–6 product description 1–5 port options ExpressCard slot 5–6 flash media reader 5–6 USB port 5–6.
Inde x Maintenance and Se rvice Gui de Index–5 setup utility accessing 5–7 Diagnostics menu 5–9 File menu 5–8 Security menu 5–9 System Configuration menu 5–10 speaker location 2–2 , 2–.
Ein wichtiger Punkt beim Kauf des Geräts Compaq 615 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Compaq 615 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Compaq 615 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Compaq 615 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Compaq 615 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Compaq 615 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Compaq 615 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Compaq 615. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Compaq 615 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
