Benutzeranleitung / Produktwartung concept 20 des Produzenten Clifford
Zur Seite of 25
Owner' s Manua l World-Clas s Aut o Securit y T M concep t 2 0.
All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; .
Table of Contents Standard Features of the Concept 20 . . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 10 How to use your keychain remote control .
Table of Contents (cont.) How to interpret the LED status indicator . . . . . . . . . . . . . . . 16 Automatic Battery-Saving Mode . . . . . . . . . . . . . . . . . . . . . . 16 AutoLock and AutoUnLock™ . . . . . . . . . . . . . . . . . . . . . 16 Remote controlled sensor adjustments .
Standard Features of the Concept 20 ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Concept 20 (cont.) ✔ Remotely Adjustable Dual-Zone Piezo Sensor™ — With just a touch on the remote, you may, at any time or place, adjust and test the sensitivity of this microprocessor-controlled solid-state sensor.
Standard Features of the Concept 20 (cont.) ✔ Remote Door Locking/Unlocking with Built-in Relays — No more fumbling with keys in the dark or bad weather! A press of a button on the remote control simultaneously arms your system and locks your vehicle’s power locks.
Standard Features of the Concept 20 (cont.) ✔ Multiple-Event TotalRecall™ — Concept 20’s memory stores the identity of the last eight triggers and/or sensors activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the activated triggers and sensors in reverse chronological order.
Standard Features of the Concept 20 (cont.) ✔ Enhanced User-Selectable AutoArming™ — Automatically arms itself “passively” if you forget. May qualify you for an insurance discount that could pay for the system (consult your insurance company).
Standard Features of the Concept 20 (cont.) ✔ High-Luminescence LED Status Indicator with Automatic Battery-Saving Mode — Adds visual deterrence and identifies system status. To conserve vehicle battery power, if the system has remained continuously armed for 48 hours, the flash rate will automatically slow to half the normal rate.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Concept 20 vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories.
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system.
What each button/channel does Your Concept 20 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24).
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off.
Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers are far more effective and efficient than scanning.
UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system.
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode.
Press button 1 again and the doors lock (confirmed by two flashes). You can also use the other channels to activate options such as a remote trunk release or remote engine starting. FACT™— False Alarm Control and Test With FACT, you’ll never experience repeated false alarms.
AutoLock and AutoUnLock™ For your safety and that of your passengers, the doors automatically lock the instant you turn on the ignition (see User-selectable features on pages 20-24). When you turn the ignition off, AutoUnLock automatically unlocks the doors.
have factory-delayed courtesy lights). If a sensor is malfunctioning, you will receive the usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Since this is a warning indication, you will hear the 4 chirps even if you have the chirp muting feature turned on.
High-output Insignia™ Siren All the siren electronics are in the system control unit rather than the siren itself. This protects them from heat, dirt and exposure to the elements (other alarm companies’ sirens are far more susceptible to failure).
User-selectable features Your Concept 20 allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times.
c. To exit program mode, turn the ignition off (you’ll hear 3 chirps and the LED will turn off to indicate exit of program mode). If driving, just wait 60 seconds and the system will automatically exit program mode.
Therefore, you can go right away to the row selection (momentary side of the switch). Now, within 10 seconds, press the momentary side two times to jump to row 2. After a brief pause, you’ll hear 1 chirp to confirm that AutoUnLock is now off. 4. Now look up the location on the table of siren duration.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Row 1 1st momentary Add new remote to channel 1 info on.
Ein wichtiger Punkt beim Kauf des Geräts Clifford concept 20 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Clifford concept 20 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Clifford concept 20 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Clifford concept 20 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Clifford concept 20 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Clifford concept 20 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Clifford concept 20 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Clifford concept 20. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Clifford concept 20 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
