Benutzeranleitung / Produktwartung 800-IQ des Produzenten Clifford
Zur Seite of 25
Owner' s Manua l World-Clas s Aut o Securit y T M intelliguar d 800-I Q.
All IntelliGuard-IQ Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,9.
Table of Contents Standard Features of the IntelliGuard 8OO- IQ . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . . .
Table of Contents (cont.) Headlight Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 FACT — False Alarm Control and Test . . . . . . . . . . . . . . . . . . . . 16 Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . .
Standard Features of the IntelliGuard 8OO- IQ ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see card for details).
Standard Features of the IntelliGuard 8OO- IQ (cont.) Tonal Confirmation of Sensor Adjustments As you remotely increase sensitivity, the confirming chirps rise in pitch. Conversely, as you lower each zone’s sensitivity, the confirmation chirps become lower and lower in pitch.
Standard Features of the IntelliGuard 8OO- IQ (cont.) ✔ Built-In Parking Light Flasher — Visually confirms door lock and system status. ✔ Remote Controlled Courtesy Lighting —For your personal.
Standard Features of the IntelliGuard 8OO-IQ (cont.) ✔ Use r-Programmable MultiSound Medallion™ Siren — The IntelliGuard 800-IQ ’s innovative MultiSound Medallion siren integrates creative form and engineering triumphs. Designed entirely by Clifford engineers, there ’s no other siren like it.
Standard Features of the IntelliGuard 8OO-IQ (cont.) ✔ Smart Remote Trunk Release Capability — An electronic interlock assures the optional remote trunk release can be activated only when disarmed.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your IntelliGuard 800-IQ vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories.
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls (one with a gun-metal gray case, the other with a burlwood finish) are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet (up to 300 feet with the optional ElectroLoop Antenna).
What each button/channel does Your IntelliGuard 800-IQ remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24).
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 for 3 seconds. The lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off.
AntiScan™ Thieves can disarm some other brands of car alarms with a “scanner” that rapidly transmits one remote control code after another. Clifford’s AntiScan will detect any scanner and block the codes it generates.
UltraSecure™ Coded Valet Mode Your secret valet code I n seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system.
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode.
Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. With other alarms, this requires repeated trips back to the dealer.
FACT™— False Alarm Control and Test With FACT, you’ll never experience repeated false alarms. If the MultiSound Medallion Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren duration.
Multiple-event TotalRecall™ The system’s memory records the identity of the last eight activated or malfunctioning triggers and sensors, which allows your installer to instantly track down malfunctions. To identify the triggers and sensors held in the system’s memory, use the following procedure: 1.
Tamper-proof ignition immobilization output If your IntelliGuard 800-IQ is equipped with the ignition immobilization option, while armed, the system assures that your vehicle is completely immobilized by automatically locking out the ignition system.
Smart trunk release option If the remote trunk release feature was installed, you may use the remote control’s button 2 to remotely pop the trunk. Your IntelliGuard 800-IQ has a built-in electronic interlock to prevent unintentional activation of the remote trunk release when you drive, or when the system is armed.
User-selectable features Your IntelliGuard 800-IQ allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times.
EXAMPLE 1: Turn off siren sound number 2: You can turn each of the siren’s six different sound patterns on and off as you wish to create you own custom sound (see the Personalized Siren Sounds section on page 18 for more information) To turn off “Sound 2” you’ll note that “Sound 2” is in column 1, row 2 of the Table (on pages 23-24).
5. To exit the program mode, turn the ignition off. You’ll hear 3 chirps to confirm program mode exit. You just made three programming changes in only five steps. Easy, isn’t it? Notice again that in step 3 on the previous page you did not have to re-select column 1.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Column 4 4th latched Column 5 5th latched Row 1 1st mom.
Ein wichtiger Punkt beim Kauf des Geräts Clifford 800-IQ (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Clifford 800-IQ noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Clifford 800-IQ - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Clifford 800-IQ reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Clifford 800-IQ erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Clifford 800-IQ besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Clifford 800-IQ verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Clifford 800-IQ. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Clifford 800-IQ gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
