Benutzeranleitung / Produktwartung QT-2100 des Produzenten Casio
Zur Seite of 250
QT-2100 V er satile Intelligent T erminal ———————————————————————— Pr ogramming Manual V ersion 1.0 F ebruar y 2002 0.00 Key Assign 000.NOP 001.CASH 002.CHARGE 003.CHECK 004.CREDIT 006.NB 008.PRCINQ 009.
P-2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty of any kind with regard to this material, including, but not limited to the implied warranties of marketability and fitness for a particular purpose.
P-3 Preface QT-2100 Programming Manual.
P-4 Contents 1. Machine Initialization ................................................................ P-8 1-1. Ho w to initialize QT -2100 ter minal ............................................................. P-8 1-2. Ho w to initialize QT -2100 ter minal (add/replace one QT -2100) .
P-5 Contents QT-2100 Programming Manual 4-3. Programming key features ..................................................................... P-108 4-3-1 Programming PLU features ...................................................................... P-108 4-3-2 Programming PLU 2nd@ features .
P-6 Contents 7 . Pr ogram 6 .............................................................................. P-170 7-1. Program read general procedure ........................................................... P-170 7-2. Program read report sample ....
P-7 QT-2100 Programming Manual 1. Mac hine Initialization ................................................................. P-8 1-1. How to initialize QT -2100 terminal ............................................................. P-8 1-2. How to initializ e QT -2100 ter minal (add/replace one QT -2100) .
P-8 Initialization 1. Machine Initialization 1-1. How to initialize QT-2100 terminal Preparation: 1. All peripheral devices and QT-2100 terminals of this cluster should be turned off. 2. Connect all of the peripheral devices (such as printer, display etc.
P-9 QT-2100 Programming Manual 10. In this field, you can select “1. Master/2. Backup Master/3. Satellite/4.Selfmaster.” Please select one of these options and press the <YES> key. 11. In these fields, you can select, “1. No/2. UP-350/3. SA-3015/ 4.
P-10 Initialization Program copy from other terminal. 15. In this field, you can select the receiving contents as “1. All Data (including totalizer)/2. All PGM (program only).” 16. In this field, you should enter the source ID number of the data and press the <YES> key.
P-11 QT-2100 Programming Manual 1-2. How to initialize QT-2100 terminal (add/replace one QT-2100) Preparation: 1. All peripheral devices and QT-2100 terminals of this cluster should be turned off. 2. Connect all of the peripheral devices (such as printer, display etc.
P-12 Initialization 11. In these fields, you can select, “1. No/2. UP-350/3. SA-3015/ 4. UP-250” for R/J/Order printer. Please choose former option and press the <YES> key. 12. In this field, you can select, “1. No/2. SA-3015/3. SP-1300” for slip printer.
P-13 QT-2100 Programming Manual Program copy from other terminal. 15. In this field, you can select the receiving contents as “1. All Data (including totalizer)/2. All PGM (program only).” 16. In this field, you should enter the source ID number of the data and press the <YES> key.
P-14 Initialization 1-3. How to flag clear QT-2100 terminal (or INIT2) Preparation: 1. All peripheral devices and this QT-2100 terminal should be turned off. 2. Check the connection of all peripheral devices (such as printer, display etc.) of this QT-2100 terminal.
P-15 QT-2100 Programming Manual 2 . Pr ogram 5 ................................................................................. P-16 2-1. Programming memory allocation (daily & program) ................................. P-16 2-2. Programming memory allocation (periodic & work) .
P-16 Program 5 2. Program 5 2-1. Programming memory allocation (daily & program) Operation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 5 mode. 3. Select “ 1. Daily & PGM ” and press the <YES> key.
P-17 QT-2100 Programming Manual 2-2. Programming memory allocation (periodic & work) Operation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 5 mode. 3. Select “ 2. Periodic & Work ” and press the <YES> key.
P-18 Program 5 2-3. Programming memory allocation file by file If you want to allocate files file by file, follow the procedures below. Operation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 5 mode. 3. Select “ 3.
P-19 QT-2100 Programming Manual File File description Record Max. No. W ork Description Attrib u- Allocat- No. length of records size tion able System files 901 System connection table 18 33 75 Progra.
P-20 Program 5 Note: Never allocate “ Shift PLU ” files, if you use “ Accumulation for menu totaling specification ” . File File description Record Max.
P-21 QT-2100 Programming Manual File File description Record Max. No. W ork Description Attrib u- Allocat- No. length of records size tion able 803 Schedule 11 2079 111 Program Y es 806 Time & Att.
P-22 Program 5.
P-23 QT-2100 Programming Manual 3 . Pr ogram 4 ................................................................................. P-24 3-1. Programming key allocation ..................................................................... P-24 3-2. Programming key allocation (key location change) .
P-24 Program 4 3. Program 4 3-1. Programming key allocation Operation: 1. Sign on a clerk (if necessary). 2. Put the first level menu sheet on the keyboard. 3. Press <PGM MODE> repeatedly to assign Program 4 mode. 4. Select “ 1. Key Assign ” and press the <YES> key.
P-25 QT-2100 Programming Manual Function Code Initial character Add check 094 Arrangement 044 Bill copy 047 Break-in/out 109 Cancel 236 Cash amount tendered 001 Charge 002 Check endorsement 039 Check .
P-26 Program 4 3-2. Programming key allocation (key location change) Operation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 4 mode. 3. Select “ 2. Key Move ” and press the <YES> key. 4. Press the first key you want to change.
P-27 QT-2100 Programming Manual 6. Press the <YES> key after confirmation. 7. Press <ESC> key to return to the previous menu. Keyboard layout The shadowed key cannot be programmed with any other functions. Key Move CASH <-> CHARGE Move OK? (YES/NO) 0.
P-28 Program 4 3-3. Programming key allocation Programming different function on the same location of the different menu sheet level. Method 1 Operation: First of all, programming one function on one menu sheet by the method of Section 3-1. Next, issue “ 5.
P-29 QT-2100 Programming Manual Method 2 Operation: In case of allocating different functions from the functions of the same location on the first level menu sheet, turn the menu sheet or press the <MENU> key and allocate the function on the menu sheet which you want to put.
P-30 Program 4.
P-31 QT-2100 Programming Manual 4. Pr ogram 3 ................................................................................. P-34 4-1. Programming machine features ............................................................... P-34 4-1-1 Programming pulldown group (adding/modifying/deleting group item) .
P-32 Program 3 4-2-2-4 Programming function control 1 .................................................................... P-85 4-2-2-5 Programming function control 2 .................................................................... P-86 4-2-2-6 Programming function control 3 .
P-33 QT-2100 Programming Manual 4-3-7-16 W or ksheet f or non-add, non-add/NS .......................................................... P-126 4-3-7-17 W or ksheet for customer ..........................................................................
P-34 Program 3 4. Program 3 4-1. Programming machine features Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 3 mode. 3. Select “ 1. Machine Feature ” and press the <YES> key. 4-1-1 Programming pulldown group (adding/modifying/deleting group item) Operation 4.
P-35 QT-2100 Programming Manual Addition/Modification 7. Select a record you want to add an item or modify the item and press the <YES> key. 8. Select “ 1. PLU ” or “ 2. Pull Down Group ” you want to program. 9. To select an appropriate PLU as an item, select a PLU directly, enter PLU No.
P-36 Program 3 Deletion 7. Select the first record of items you want to delete and press the <NO> key. 8. Press the <YES> key. The selected item and followings are deleted. 9. Press the <ESC> key to return to the previous menu. 4-1-2 Programming set menu table Operation 4.
P-37 QT-2100 Programming Manual Addition/Modification 6. Select an item record you want to add or modify and press the <YES> key. 7. Select “ 1. PLU ” , “ 2. PLU 2nd@ ” or “ 3. List ” you want to program. 8. To select an appropriate PLU or PLU 2md@ as an item, select a PLU directly, enter PLU No.
P-38 Program 3 Deletion 6. Select the smallest record you want to delete the item(s) and press the <NO> key. 7. Press the <YES> key. 8. Press the <ESC> key to return to the previous menu. 4-1-3 Programming arrangement Operation 4. Select “ 3.
P-39 QT-2100 Programming Manual 6. Press the <YES> key, enter arrangement commands by character and press the <YES> key. 7. Press the <ESC> key to return to the previous menu. 4-1-4 Programming batch X/Z report Operation 4. Select “ 4.
P-40 Program 3 a b c Description Choice Program code Allow to issue read report. Allow to issue reset report. Read/Reset selection (direct issuance) Reported area: Daily area = 0, Periodic 1 area = 1,.
P-41 QT-2100 Programming Manual 4-1-5 Programming the general feature Operation 4. Select “ 5. General Feature ” and press the <YES> key. 4-1-5-1 Programming the machine control 1 5. Select “ 1. Machine Control1 ” and press the <YES> key.
P-42 Program 3 4-1-5-2 Programming the machine control 2 Operation 5. Select “ 2. Machine Control2 ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-43 QT-2100 Programming Manual 7. Round of Premium or Discount operation: Rounding on the least significant digit of Premium or Discount registration. 8. Restrict (0 or 5) on the last digit for amount entry: The least significant digit for monetary amount entries is restricted to 0 or 5.
P-44 Program 3 4-1-5-3 Programming the machine control 3 Operation 5. Select “ 3. Machine Control3 ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-45 QT-2100 Programming Manual 4-1-5-4 Programming the machine control 4 Operation 5. Select “ 4. Machine Control4 ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-46 Program 3 4-1-5-5 Programming the print control Operation 5. Select “ 5. Print Control ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-47 QT-2100 Programming Manual 4-1-5-6 Programming the report control 1 Operation 5. Select “ 6. Report Control1 ” and press the <YES> key. General Feature General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.
P-48 Program 3 4-1-5-7 Programming the report control 2 Operation 5. Select “ 7. Report Control2 ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-49 QT-2100 Programming Manual 4-1-5-8 Programming the communication Operation 5. Select “ 8. Communication ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-50 Program 3 4-1-5-9 Programming the hourly sales Operation 5. Select “ 9. Hourly Sales ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-51 QT-2100 Programming Manual Field meaning 1. Print additional items only: Slip printing begins with “ At the top of the transaction (Entire memory)/At the top of this receipt (Additional only). ” 2. Slip Maximum Line (00 ~ 99) Note: This line should be set.
P-52 Program 3 4-1-5-12 Programming the message control Operation 5. Select “ 12. Message Control ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-53 QT-2100 Programming Manual 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key. 7. After programming, you should press the <ESC> key to return to the previous menu.
P-54 Program 3 4-1-5-15 Programming the check tracking Operation 5. Select “ 15. CHK Tracking ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-55 QT-2100 Programming Manual 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key. 7. After programming, you should press the <ESC> key to return to the previous menu.
P-56 Program 3 4-1-5-18 Programming the menu shift 1 Operation 5. Select “ 18. Menu Shift 1 ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-57 QT-2100 Programming Manual 4-1-5-19 Programming the menu shift 2 Operation 5. Select “ 19. Menu Shift 2 ” and press the <YES> key. 6. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-58 Program 3 4-1-6 Programming scheduler Operation 4. Select “ 6. Scheduler ” and press the <YES> key. 5. Enter schedule (refer to the next page) and press the <YES> key. 6. Press the <ESC> key to return to the previous menu. Machine Feature Machine Feature 1.
P-59 QT-2100 Programming Manual Description Choice Pr ogram code Scheduler start time (00:00 ~ 23:59) Scheduler end time (00:00 ~ 23:59) Always “ 0 ” Interval control 1: Daily = 0, W eekly = 1, Mo.
P-60 Program 3 4-1-7 Programming check print Operation 4. Select “ 7. Check Print ” and press the <YES> key. 5. Enter value (below) and press the <YES> key. 6. Press the <ESC> key to return to the previous menu. Machine Feature Machine Feature 1.
P-61 QT-2100 Programming Manual 4-1-8 Programming table analysis Operation 4. Select “ 8. Table Analysis ” and press the <YES> key. 5. Select an appropriate record and press the <YES> key. 6. Enter characters for table analysis and press the <YES> key.
P-62 Program 3 4-1-9 Programming tax table Operation 4. Select “ 9. Tax Table ” and press the <YES> key. 5. Select an appropriate table and press the <YES> key. 6. Select an appropriate record and press the <YES> key. 7. Enter value (below) and press the <YES> key.
P-63 QT-2100 Programming Manual Explanation of U.S. tax table examples Tax table without a tax rate • Sum of a single cyclic pattern: 14 + 14 + 14 + 15 + 14 + 14 + 15 = 100 • Number of values in e.
P-64 Program 3 Explanation of VAT & VAT Example 1: Share the amount Tax table programming Item programming & registration result T ax rate Calculation Primary Secondary (Share rate) type tax status tax status T able 1 10.0000% V A T T able 2 20.
P-65 QT-2100 Programming Manual 4-1-10 Programming void table Operation 4. Select “ 10. Void Table ” and press the <YES> key. 5. Press the <YES> key. 6. Select an appropriate record and press the <YES> key. 7. Enter void character and press the <YES> key.
P-66 Program 3 4-1-11 Programming system connection Operation 4. Select “ 11. System Connection ” and press the <YES> key. 5. Select the record with “ * ” and press the <YES> key. 6. Enter the logical ID character and press the <YES> key.
P-67 QT-2100 Programming Manual 4-1-12 Programming I/O parameter Operation 4. Select “ 12. I/O Parameter ” and press the <YES> key. 5. Select an appropriate record, enter appropriate value (below) and press the <YES> key. 6. Press the <ESC> key to return to the previous menu.
P-68 Program 3 Description Choice Program code Display color: White line/black ground = 0, Black line/white ground = 1 : D 1 Significant number Seventh record Fourth record Fifth record Description Choice Pr ogram code No.
P-69 QT-2100 Programming Manual Description Choice Program code Always “ 0 ” ; D 1 Description Choice Pr ogram code Parity: Even = 0, Non = 1, Odd = 2 Bit: 7 bit = 0, 8 bit = 1 Scanner: Connect = .
P-70 Program 3 4-1-13 Programming printer connection Operation 4. Select “ 13. Printer Connection ” and press the <YES> key. 5. Select an appropriate record of the main printer field and press the <YES> key. 6. Select these options, “ 1.
P-71 QT-2100 Programming Manual 4-1-14 Programming time zone Operation 4. Select “ 14. Time Zone ” and press the <YES> key. 5. Select an appropriate record, and enter the start time, end time, and cycle time. 6. Press the <ESC> key to return to the previous menu.
P-72 Program 3 4-1-15 Programming time & attendance Preparation 4. Select “ 15. Time & Attendance ” and press the <YES> key. 4-1-15-1 Programming time & attendance (general) Operation 5. Select “ 1. General ” and press the <YES> key.
P-73 QT-2100 Programming Manual 4-1-15-2 Programming time & attendance (job code) Operation 5. Select “ 2. Job Code ” and press the <YES> key. 6. Select an appropriate job code and press the <YES> key. 7. Select an appropriate record to enter the character or number and press the <YES> key, or choose option.
P-74 Program 3 4-1-15-3 Programming time & attendance (employee & schedule) Operation 5. Select “ 3. Employee&Schedule ” and press the <YES> key. 6. Select an appropriate employee file, and press the <YES> key. 7. Select an appropriate record to enter the character or choose options.
P-75 QT-2100 Programming Manual 9. Select an appropriate day, and press the <YES> key. 10. Select an appropriate record to enter the appropriate job and time. Time & Attendance Schedule 1.Monday 2.Tuesday 3.Wednesday 4.Thursday 5.Friday 6.Saturday 7.
P-76 Program 3 4-1-16 Programming hourly item link Operation 4. Select “ 16. Hourly/Item Link ” and press the <YES> key. 5. Select an appropriate record, and press the <YES> key. 6. Select an appropriate record, and choose the items from PLU, subdepartment, department, function, fixed totalizer, group, and void reason.
P-77 QT-2100 Programming Manual 4-1-17 Programming IDC link Operation 4. Select “ 17. IDC Link ” and press the <YES> key. 5. Select an appropriate record, and press the <YES> key. 6. Select an appropriate item and press the <YES> key to choose an option.
P-78 Program 3 4-1-18 Programming Euro Operation 4. Select “ 18. EURO (sub currency ” and press the <YES> key. 5. Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
P-79 QT-2100 Programming Manual 4-1-19 Programming auto program control This program restricts the broadcasting feature after programming. Operation 4. Select “ 19. Auto Pgm control ” and press the <YES> key. 5. Select an appropriate record, and enter the program code.
P-80 Program 3 4-2. Programming clerks Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> to assign Program 3 mode. 3. Select “ 2. Clerk ” and press the <YES> key. 4-2-1 Programming clerk features Operation 4. Select “ 1.
P-81 QT-2100 Programming Manual 6. Select an appropriate record and choose options. 7. After programming, press the <ESC> key to return to the previous menu. Field meaning 1. Type of operator: Choose “ Cashier/Clerk/Manager. ” 2. Void operation: Choose “ Current only/Complete void/Not allowed.
P-82 Program 3 4-2-2 Programming operation Preparation 4. Select “ 2. Operation ” and press the <YES> key. 4-2-2-1 Programming clerk control Operation 5. Select “ 1. Clerk Control ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key.
P-83 QT-2100 Programming Manual 4-2-2-2 Programming menu shift/2nd@ Operation 5. Select “ 2. Menu Shift/2nd@ ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and choose options.
P-84 Program 3 4-2-2-3 Programming mode control Operation 5. Select “ 3. Mode Control ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and choose options. 8. After programming, press the <ESC> key to return to the previous menu.
P-85 QT-2100 Programming Manual 4-2-2-4 Programming function control 1 Operation 5. Select “ 4. Allowed function 1 ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-86 Program 3 4-2-2-5 Programming function control 2 Operation 5. Select “ 5. Allowed function 2 ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-87 QT-2100 Programming Manual 4-2-2-6 Programming function control 3 Operation 5. Select “ 6. Allowed function 3 ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-88 Program 3 4-2-2-7 Programming function control 4 Operation 5. Select “ 7. Allowed function 4 ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-89 QT-2100 Programming Manual 4-2-2-8 Programming function control 5 Operation 5. Select “ 8. Allowed function 5 ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-90 Program 3 4-2-2-9 Programming arrangement control Operation 5. Select “ 9. Arrangement ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-91 QT-2100 Programming Manual 4-2-2-10 Programming X/Z report control Operation 5. Select “ 10. Report ” and press the <YES> key. 6. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and press the <YES>/<NO> key.
P-92 Program 3 4-2-3 Programming commission rate Operation 4. Select “ 3. Commission Rate ” and press the <YES> key. 5. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and enter value (0 ~ 99.99), and then press the <YES> key.
P-93 QT-2100 Programming Manual 4-2-4 Programming table range Operation 4. Select “ 4. Table Range ” and press the <YES> key. 5. Select an appropriate clerk and press the <YES> key. 7. Select an appropriate record and enter values (0 ~ 999999), and then press the <YES> key.
P-94 Program 3 4-2-5 Programming clerk by range Preparation 4. Select “ 5. Range ” and press the <YES> key. 4-2-5-1 Programming clerk control by range Operation 5. Select “ 1. Clerk Control ” and press the <YES> key. 6. Select an appropriate record and choose options.
P-95 QT-2100 Programming Manual 4-2-5-2 Programming menu shift/2nd@ by range Operation 5. Select “ 2. Menu Shift / 2nd@ ” and press the <YES> key. 6. Select an appropriate record and choose options. 7. After programming, press the <ESC> key to proceed to the next step.
P-96 Program 3 4-2-5-3 Programming mode control by range Operation 5. Select “ 3. Mode Control ” and press the <YES> key. 6. Select an appropriate record and choose options. 7. After programming, press the <ESC> key to proceed to the next step.
P-97 QT-2100 Programming Manual 4-2-5-4 Programming function control 1 by range Operation 5. Select “ 4. Allowed function 1 ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-98 Program 3 4-2-5-5 Programming function control 2 by range Operation 5. Select “ 5. Allowed function 2 ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-99 QT-2100 Programming Manual 4-2-5-6 Programming function control 3 by range Operation 5. Select “ 6. Allowed function 3 ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-100 Program 3 4-2-5-7 Programming function control 4 by range Operation 5. Select “ 7. Allowed function 4 ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-101 QT-2100 Programming Manual 4-2-5-8 Programming function control 5 by range Operation 5. Select “ 8. Allowed function 5 ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-102 Program 3 4-2-5-9 Programming arrangement control by range Operation 5. Select “ 9. Arrangement ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-103 QT-2100 Programming Manual 4-2-5-10 Programming X/Z report control by range Operation 5. Select “ 10. Report ” and press the <YES> key. 6. Select an appropriate record and press the <YES>/<NO> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-104 Program 3 4-2-5-11 Programming commission rate by range Operation 5. Select “ 11. Commission Rate ” and press the <YES> key. 6. Select an appropriate record, enter the rate and press the <YES> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-105 QT-2100 Programming Manual 4-2-5-12 Programming table range by range Operation 5. Select “ 12. Table Range ” and press the <YES> key. 6. Select an appropriate record, enter the range and press the <YES> key. 7. After programming, press the <ESC> key to proceed to the next step.
P-106 Program 3 4-2-6 Programming clerk detail Operation 4. Select “ 6. Clerk Detail ” and press the <YES> key. Addition/Modification 7. Select a record you want to add an item or modify the item and press the <YES> key. 8. Select a file which you want to program.
P-107 QT-2100 Programming Manual Deletion 6. Select the smallest record you want to delete the item(s) and press the <NO> key. 7. Press the <YES> key. 8. Press the <ESC> key to return to the previous menu. 4-2-7 Programming clerk key ID Operation 4.
P-108 Program 3 4-3. Programming key features Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> to assign Program 3 mode. 3. Select “ 3. Key Feature ” and press the <YES> key. 4-3-1 Programming PLU features Operation 4.
P-109 QT-2100 Programming Manual 6. Select an appropriate record and press the <YES>/<NO> key or enter the numeric value and press the <YES> key. 7. Press the <ESC> key to return to the previous menu. Field meaning 1. Receipt type: You can choose “ Normal Item ” or “ Single Item.
P-110 Program 3 4-3-2 Programming PLU 2nd@ features Operation 4. Select “ 2. PLU 2nd@ ” and press the <YES> key. 5. Select an appropriate item directly, by entering record No.
P-111 QT-2100 Programming Manual 4-3-3 Programming subdepartment features Operation 4. Select “ 3. Sub-Department ” and press the <YES> key. 5.
P-112 Program 3 4-3-4 Programming department features Operation 4. Select “ 4. Department ” and press the <YES> key. 5. Select an appropriate item directly or by entering record No.
P-113 QT-2100 Programming Manual 4-3-5 Programming by range Operation 4. Select “ 5. Range ” and press the <YES> key. Select the subject you want to program 5. Select “ 1. PLU/2. PLU 2nd@/3. Sub-Department/4. Department ” and press the <YES> key.
P-114 Program 3 4-3-5-1 General procedure of PLU, PLU 2nd@, subdepartment, department by range 6. Select an appropriate job (refer to the next page) and press the <YES> key. 7. Select an appropriate type and press the <YES> key. 8. Enter the start range No.
P-115 QT-2100 Programming Manual 4-3-5-2 Programming hierarchy of programming title PLU PLU 2nd@ Sub-Dept Dept 1. Receipt Type 1. Receipt Type 1. Receipt Type 2. Item Type 3. Group Link 1. Group Link 2. Group Link 2. Group Link 4. Dept Link 2. Dept Link 3.
P-116 Program 3 4-3-6 Programming individual program Operation 4. Select “ 6. Individual PGM ” and press the <YES> key. Select a job you want to program 5. Select jobs listed below. 1. Receipt Type 19. Unit Stock: 0.001 - 99.9999 2. Item Type 20.
P-117 QT-2100 Programming Manual 4-3-7 Programming key function program Operation 4. Select “ 7. Function Key ” and press the <YES> key. 5. Enter program code (refer to the worksheet on the following pages) and press the function key. 6. Press the <ESC> key to return to the previous menu.
P-118 Program 3 4-3-7-1 Worksheet for cash, charge, credit and check *1 Those are valid options for AUTO CASH as well. *2 Those are valid options for Single item as well. *3 Those are valid options for Cashing a check as well. *4 Those are valid options for Currency exchange (include partial tender) as well.
P-119 QT-2100 Programming Manual 4-3-7-2 Worksheet for new balance Description Choice Program code Allowable number of validation printing ( “ 0 ” means no limitation) Force v alidation operation. Print check number barcode on receipt. Always “ 0 ” Force batch slip printing.
P-120 Program 3 4-3-7-3 Worksheet for text print, text recall Description Choice Program code Start record number of displaying “ TEXT RECALL WINDOW ” ( “ 00 ” means “ 01 ” .) Allow clerk or mode change after the “ text recall ” key depression.
P-121 QT-2100 Programming Manual 4-3-7-4 Worksheet for check print 4-3-7-5 Worksheet for clerk transfer 4-3-7-6 Worksheet for table transfer 4-3-7-7 Worksheet for tip Description Choice Program code N.
P-122 Program 3 4-3-7-8 Worksheet for loan, pick up 4-3-7-9 Worksheet for received on account, paid out Description Choice Pro gram code Allowable number of validation printing ( “ 0 ” means no limitation) Force v alidation operation.
P-123 QT-2100 Programming Manual 4-3-7-10 Worksheet for plus, minus, coupon Description Choice Program code Multiple validation (If “ No ” , only one validation printing is possible.
P-124 Program 3 4-3-7-12 Worksheet for void 4-3-7-13 Worksheet for check endorsement 4-3-7-11 Worksheet for deposit+, deposit – Description Choice Program code Force validation operation. Multiple validation (If “ No ” , only one validation is possible.
P-125 QT-2100 Programming Manual 4-3-7-14 Worksheet for discount, premium Description Choice Program code Multiple validation (If “ No ” , only one validation printing is possible.
P-126 Program 3 4-3-7-15 Worksheet for receipt 4-3-7-16 Worksheet for non-add, non-add/NS Description Choice Program code Allow mode change or clerk change after non add registration as first transaction. (only for non-add function) Order character record number (00 ~ 99): ( “ 00 ” means no setting.
P-127 QT-2100 Programming Manual 4-3-7-17 Worksheet for customer 4-3-7-18 Worksheet for arrangement Description Choice Program code Input method: Allow replacement = 0, Prohibit replacement = 1, Add e.
P-128 Program 3 4-3-7-19 Worksheet for currency exchange 4-3-7-20 Worksheet for slip 4-3-7-21 Worksheet for T/S, TAST Significant number Significant number Significant number Significant number Decimal = 0 Comma = 1 Comma = 0 Decimal = 4 Significant number Description Choice Program code Def ine amount symbol.
P-129 QT-2100 Programming Manual 4-3-7-22 Worksheet for open 4-3-7-23 Worksheet for open 2 Description Choice Program code Release high amount limit Always “ 000000 ” : D 7 ;;;;;; D 6 D 5 D 4 D 3 D 2 D 1 No = 0 Y es = 1 Description Choice Program code Release customer number compulsory .
P-130 Program 3 4-3-7-24 Worksheet for clerk number 4-3-7-25 Worksheet for operator X/Z 4-3-7-26 Worksheet for subtotal, merchandise subtotal Description Choice Program code 1 Issue stand-alone report./ 2 Issue consolidation report. 1 Print report./ 2 Display report.
P-131 QT-2100 Programming Manual 4-3-7-28 Worksheet for multiplication, quantity/for, square, cube, Ketten Bon 4-3-7-30 Worksheet for open check 4-3-7-29 Worksheet for selective item subtotal 4-3-7-31.
P-132 Program 3 4-3-7-32 Worksheet for tax exempt 4-3-7-33 Worksheet for clock-in/clock-out 4-3-7-34 Worksheet for break-in/break-out Description Choice Program code The purpose of uses: Use both clock-in and clock-out = 0 Use only clock-in = 1 Use only clock-out = 2 Print when clock-in or clock-out keys are pressed.
P-133 QT-2100 Programming Manual 4-3-7-35 Worksheet for eat-in/take-out 4-3-7-36 Worksheet for store 4-3-7-37 Worksheet for new check, new/old check Description Choice Program code Enable auto check a.
P-134 Program 3 4-3-7-39 Worksheet for shift PLU Description Choice Program code Shift: 1 Status, 2 Staydown Def ine assigning shift PLU number . (0, 1 ~ 8) ( “ 0 ” is treated as “ 1 ” .
P-135 QT-2100 Programming Manual 4-3-8 Programming shift PLU program Operation 4. Select “ 8. Shift PLU ” and press the <YES> key. 5. Select an appropriate item directly, by entering record No. or by entering PLU No. and press the <YES> key.
P-136 Program 3 4-3-9 Programming scanning PLU link program Operation 4. Select “ 9. Scanning PLU link ” and press the <YES> key. 5. If you append a new PLU or modify an existing PLU, select “ Append/Mod PLU ” . If you delete an existing PLU, select “ Delete PLU ” .
P-137 QT-2100 Programming Manual Delete PLU 6. Scanning the barcode or enter the PLU code and press the <OBR>. After this step, go to the step 5 automatically.
P-138 Program 3.
P-139 QT-2100 Programming Manual 5. Pr ogram 2 ............................................................................... P-140 5-1. Character programming ......................................................................... P-140 5-1-1 Character programming keyboard .
P-140 Program 2 5. Program 2 5-1. Character programming There are two methods you can use to input characters: using a character programming keyboard (menu sheet) for direct input, or using character codes to specify the characters.
P-141 QT-2100 Programming Manual Character programming keyboard (Menu sheet) The character programming keyboard has an upper case “ CAP ” setting and a “ SHIFT ” setting. Its initial setting is CAP setting, which remains in effect until you press the <SHIFT> key.
P-142 Program 2 5-1-2 Inputting characters by code You can also program text by inputting codes that correspond to the characters you want to input. A list of character codes is given in the table below. You must also use the <B> key on the 10-key pad during character code programming to fix character codes for the last input character.
P-143 QT-2100 Programming Manual 5-2. Programming item descriptors Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 2 mode. 3. Select “ 1. Item Descriptor ” and press the <YES> key. 5-2-1 Programming PLU item descriptors Operation 4.
P-144 Program 2 5-2-2 Programming PLU 2nd unit price descriptors Operation 4. Select “ 2. PLU 2nd@ ” and press the <YES> key. 5. Select the PLU directly, or by entering record No. and press the <YES> key or by entering random code and press the <PLU No.
P-145 QT-2100 Programming Manual 5. Select the <SUBDEPARTMENT> directly or by entering subdepartment No. and press the <YES> key. 6. After pressing the <YES> key again, the original descriptors are shown in the lower column of the display.
P-146 Program 2 6. After pressing the <YES> key again, the original descriptors are shown in the lower column of the display. Then enter characters and press the <YES> key to fix them. 7. Press the <ESC> key to return to the previous menu.
P-147 QT-2100 Programming Manual 7. Enter the start range No. and press the <YES> key. (It starts “ 0001 ” if you skip to enter the start range.) Then enter the end range No. and press the <YES> key. (It ends the last record if you skip to enter the end range.
P-148 Program 2 6. Press the <YES> key and return to the previous menu. 5-2-7 Programming function key descriptors Operation 4. Select “ 7. Char & Press Key ” and press the <YES> key. 5. a) Function keys (max. 16 characters) Enter characters, press the <YES> key to fix them and press the corresponding key.
P-149 QT-2100 Programming Manual 5-3. Programming characters and messages Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 2 mode. 3. Select “ 2. Char & Message ” and press the <YES> key.
P-150 Program 2 5-3-2 Programming text recall message Operation 4. Select “ 2. Text Recall ” and press the <YES> key. 5. Select the appropriate record, press the <YES> key, enter characters (Maximum 40 characters) and press the <YES> key.
P-151 QT-2100 Programming Manual 5-3-4 Programming fixed totalizer descriptors Operation 4. Select “ 4. Fixed Totalizer ” and press the <YES> key. 5. Select the appropriate record, press the <YES> key, enter characters (Maximum 16 characters) and press the <YES> key.
P-152 Program 2 5-3-5 Programming group character Operation 4. Select “ 5. Group Character ” and press the <YES> key. 5. Select the appropriate record, press the <YES> key, enter characters (Maximum 16 characters) and press the <YES> key.
P-153 QT-2100 Programming Manual † n: Program mode number (1 ~ 6) Rec No. Contents Descriptor 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 .
P-154 Program 2 5-3-7 Programming report headers Operation 4. Select “ 7. Report Header ” and press the <YES> key. 5. Select the appropriate record, press the <YES> key, enter characters (Maximum 16 characters) and press the <YES> key.
P-155 QT-2100 Programming Manual 5-3-8 Programming endorsement message Operation 4. Select “ 8. Endorse Message ” and press the <YES> key. 5. Select the appropriate record, press the <YES> key, enter characters (Maximum 40 characters) and press the <YES> key.
P-156 Program 2.
P-157 QT-2100 Programming Manual 6 . Pr ogram 1 ............................................................................... P-158 6-1. Presetting date and time ........................................................................ P-158 6-2. Programming unit price and rate .
P-158 Program 1 6. Program 1 6-1. Presetting date and time Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 1 mode. Presetting time 3. Enter the current time in four (hour, minute) digits or in five (hour, minute, ten second) and press the <YES> key (24-hour system).
P-159 QT-2100 Programming Manual 6-2. Programming unit price and rate Preparation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 1 mode. 3. Select “ 1. Unit Price/Qty ” and press the <YES> key. 6-2-1 Programming PLU unit price Operation 4.
P-160 Program 1 6-2-2 Programming PLU 2nd unit price Operation 4. Select “ 2. PLU 2nd@ ” and press the <YES> key. 5. Select the PLU directly, or by entering record No. and press the <YES> key or by entering random code and press the <PLU No.
P-161 QT-2100 Programming Manual 6-2-3 Programming PLU unit price and PLU 2nd unit price Operation 4. Select “ 3. PLU & PLU 2nd@ ” and press the <YES> key. 5. Select the PLU directly, or by entering record No. and press the <YES> key or by entering random code and press the <PLU No.
P-162 Program 1 6-2-4 Programming subdepartment unit price Operation 4. Select “ 4. Sub-Department ” and press the <YES> key. 5. Select the subdepartment directly or by entering record No. and press the <YES> key. 6. Enter the unit price and press the <YES> key to fix them.
P-163 QT-2100 Programming Manual 5. Select the department directly or by entering record No. and press the <YES> key. 6. Enter the unit price and press the <YES> key to fix them. Pressing <YES> twice programs the same unit price to the next record.
P-164 Program 1 6. Enter the unit price (and Qty for PLU 2nd@) and press the <YES> key. 7. Enter the start range No. and press the <YES> key. (It starts “ 0001 ” if you skip to enter the start range.) Then enter the end range No. and press the <YES> key.
P-165 QT-2100 Programming Manual 6-2-7 Copying PLU unit price to PLU 2nd unit price Operation 4. Select “ 7. PLU – > 2nd@ Copy ” and press the <YES> key. 5. Enter the start range No. and press the <YES> key. (It starts “ 0001 ” if you skip to enter the start range.
P-166 Program 1 6-2-8 Programming amount or rate to keys Operation 4. Select “ 8.AMT/Rate to Key ” and press the <YES> key. 5. a) Function keys Enter the unit price or rate and press the corresponding key. (CA, CHK, NB, +, – , CPN, %+, % – , CE) b) PLU Enter the PLU No.
P-167 QT-2100 Programming Manual 6-2-9 Programming unit price of shift PLU Operation 4. Select “ 9. Shift PLU ” and press the <YES> key. 5. Select the shift level and press the <YES> key. 6. Select the PLU directly, or by entering record No.
P-168 Program 1.
P-169 QT-2100 Programming Manual 7 . Program 6 .............................................................................................. P-170 7-1. Program read general procedure ........................................................... P-170 7-2.
P-170 Program 6 7. Program 6 7-1. Program read general procedure Operation: 1. Sign on a clerk (if necessary). 2. Press <PGM MODE> repeatedly to assign Program 6 mode. 3. Press the <YES> key. 4. Select an appropriate job and press the <YES> key.
P-171 QT-2100 Programming Manual 7-2. Program read report sample 7-2-1 Unit Price/Qty 7-2-1-1. PLU unit price PLU0001 0001-004 — PLU descriptor/Record No./File No. @12.34 — Unit Price 0001-055 — Shift PLU @2.00 — 2nd unit price @3.00 — 3rd unit price @4.
P-172 Program 6 7-2-2 Item Descriptor 7-2-2-1. PLU PLU0001 0001-004 — PLU descriptor/Record No./File No. PLU0002 0002-004 PLU0003 0003-004 7-2-2-2. PLU 2nd unit price PLU0001 0001-054 — PLU 2nd descriptor/Record No./File No. PLU0002 0002-054 PLU0003 0003-054 7-2-2-3.
P-173 QT-2100 Programming Manual 7-2-3-3. Order character ORDER CHAR 1 0001-065 — Order character/Record No./File No. ORDER CHAR 2 0002-065 : : ORDER CHAR 10 0010-065 7-2-3-4. Fixed totalizer GROSS 0001-001 — Descriptor/Record No./File No. NET 0002-001 CAID 0003-001 : : EX10 0074-001 7-2-3-5.
P-174 Program 6 7-2-3-7. Special character • @No / * 0001-023 — Special character/Record No./File No. NoCTX 0002-023 X BUSY 0003-023 : : T6 T7 T8 T9 T10 0058-023 Rec No.
P-175 QT-2100 Programming Manual 7-2-3-8. Report header FIXED TTL 0001-024 — Report header/Record No./File No. FREE FUNCTION 0002-024 SUB DEPT 0003-024 : : TIME ATTENDANCE 0017-024 7-2-3-9.
P-176 Program 6 7-2-4 Machine feature 7-2-4-1. Pulldown group LIST01 0001-026 — Record No./File No. 000000 000000 — 0000D 168 D 167 , D 6 ~D 1 0101-004 PLU0101 — Link PLU, PLU 2nd@ Record No.
P-177 QT-2100 Programming Manual 7-2-4-2. Set menu table 0001-028 — Record No./File No. 0001-004 PLU0001 — Link PLU, PLU 2nd@, Pulldown group 0002-054 PLU0002 Record No./File No./Descriptor 0003-004 PLU0003 0002-028 0003-028 : : 7-2-4-3. Arrangement 0001-038 ABCDEF — Record No.
P-178 Program 6 7-2-4-5. General feature D 12 D 11 D 10 D 9 D 8 D 7 D 6 D 5 D 4 D 3 D 2 D 1 0001-022 220000000000 — Record No./File No./Parameter * 0002-022 000000000000 * 0003-022 000000000000 * 00.
P-179 QT-2100 Programming Manual Record 0003-022 Record 0004-022 Description Choice Prog ram code Reset consecutive number after daily fixed totalizer reset report is issued.
P-180 Program 6 Record 0005-022 Description Choice Program code Always issu a receipt. Print total line during finalization. T ime system: 1 24 hour system, 2 12 hour system Feed one line after issuing receipt. Always “ 0 ” Breakdown set men u printing.
P-181 QT-2100 Programming Manual Record 0006-022 Description Choice Program code Follo w the taxable status and commission status of +/ – to the pre vious item. Restrict 0 or 5 on the last digit. Display operator guidance. Alwa ys “ 0 ” Accumulate to periodic totals after daily reset operation.
P-182 Program 6 Record 0008-022 Y es = 0 No = 1 Y es = 0 No = 2 Y es = 0 No = 4 Y es = 0 No = 1 Y es = 0 No = 2 Y es = 0 No = 4 Y es = 0 No = 1 Y es = 0 No = 2 Y es = 0 No = 4 Y es = 0 No = 1 Y es = 0.
P-183 QT-2100 Programming Manual Record 0009-022 Description Choice Prog ram code Print taxable amount 1. Print tax 1. Print tax exempt 1. Print taxable amount 2. Print tax 2. Print tax exempt 2. Print taxable amount 3. Print tax 3. Print tax exempt 3.
P-184 Program 6 Record 0010-022 Description Choice Program code Print taxable amount 1. Print taxable amount 2. Print taxable amount 3. Print taxable amount 4. Print taxable amount 5. Print taxable amount 6. Print taxable amount 7. Print taxable amount 8.
P-185 QT-2100 Programming Manual Record 0012-022 Record 0013-022 Y es = 0 No = 1 Y es = 0 No = 2 Y es = 0 No = 4 Y es = 0 No = 1 Y es = 0 No = 2 Y es = 0 No = 4 Y es = 0 No = 1 Description Choice Prog ram code Print grand total 1 (periodic 1 & 2 report).
P-186 Program 6 Record 0014-022 Description Choice Program code Print/Display fixed totalizer read report. Print/Display transaction read report. Print/Display department/subdepartment read report. Print/Display PLU/stock read report. Print/Display group read report.
P-187 QT-2100 Programming Manual Record 0015-022 Description Choice Program code Zero-skip department/subdepartment report. Zero-skip clerk report. Zero-skip transaction report. Zero-skip PLU report. Zero-skip hourly report. Zero-skip group report. Zero-skip monthly report.
P-188 Program 6 Record 0016-022 Description Choice Prog ram code Interval time of hourly report (00 ~ 23 hours) Interval time of hourly report (00 ~ 59 minutes): ( “ 0000 ” treats as 01:00.
P-189 QT-2100 Programming Manual Record 0017-022 Description Choice Program code Money declaration compulsory (cash). (future) Money declaration compulsory (charge). (future) Money declaration compulsory (check). (future) Money declaration compulsory (credit).
P-190 Program 6 Record 0018-022 Description Choice Program code Maximum printing lines of slip (00 ~ 99) Classify registered items by group on slip & guest receipt.
P-191 QT-2100 Programming Manual Record 0019-022 Record 0020-022 Description Choice Program code Record operations in training mode on journal/electronic journal. Alert electronic journal memory near-end/full error . : D 2 : D 1 Y es = 0 No = 2 Y es = 0 No = 1 Description Choice Program code Print receipt logo message.
P-192 Program 6 Record 0021-022 Record 0022-022 Description Choice Pro gram code Number of details for post entry (0 ~ 9) Calculate detail item prices in set menu.
P-193 QT-2100 Programming Manual Record 0026-022 Record 0027-022 Record 0028-022 Description Choice Prog ram code Enable clerk interrupt. Enable to register a c lerk who has no clerk number . Always “ 0000 ” Always “ 0000 ” Auto sign-of f timer .
P-194 Program 6 Record 0029-022 Description Choice Program code Sheet No. of the 1st parent menu sheet. Summed up menu sheet 1 to parent 1. Summed up menu sheet 2 to parent 1. Summed up menu sheet 3 to parent 1. Summed up menu sheet 4 to parent 1. Summed up menu sheet 5 to parent 1.
P-195 QT-2100 Programming Manual Record 0031-022 Record 0032-022 Record 0033-022 Record 0034-022 Description Choice Prog ram code Enable quantity extension of touch PLU. Enable quantity extension of touch subdepartment. Enable quantity extension of touch department.
P-196 Program 6 Record 0035-022 Record 0036-022 Record 0037-022 Description Choice Program code Full aged employee: W eekly w ork time (00 ~ 99 hours) W eekly w ork time (00 ~ 59 minutes) Minor employee: W eekly w ork time (00 ~ 99 hours) W eekly w ork time (00 ~ 59 minute) Allow EMPLO YEE Z even if emplo yee are not clocked-out.
P-197 QT-2100 Programming Manual 7-2-4-6. Scheduler D 16 D 15 D 14 D 13 D 12 D 11 D 10 D 9 D 8 D 7 D 6 D 5 D 4 D 3 D 2 D 1 0001-062 0000000000000000 — Record No.
P-198 Program 6 7-2-4-7. Check print D 6 D 5 D 4 D 3 D 2 D 1 0001-041 000000 — Record No./File No./Parameter 0002-041 000000 0003-041 000000 0004-041 000000 7-2-4-8. Table analysis D 6 D 5 D 4 D 3 D 2 D 1 TBL01 0001-018 — Table analysis descriptor/Record No.
P-199 QT-2100 Programming Manual 7-2-4-9. Tax table 0001-025 — Record No./File No. TX1 10% — Tax rate TX1 0000 — Table maximum value TX1 50 — Rounding code TX1 02 — Table attribution 0002-025 TX2 10% TX2 0000 TX2 50 TX2 02 7-2-4-10. Void table Mistake 001-012 — Void reason character/Record No.
P-200 Program 6 7-2-4-12. I/O parameter 0001-902 0000000000 — Record No./File No./Parameter 0002-902 0000000000 0003-902 0000000000 0004-902 0000000000 Record 0002 Record 0003 Record 0004 Record 000.
P-201 QT-2100 Programming Manual Record 0005 Record 0006 Record 0007 Description Choice Program code Always “ 0 ” ; D 1 Description Choice Program code Display color: White line/black ground = 0, .
P-202 Program 6 Record 0010 Record 0011 Description Choice Program code No. of of fset digits of slip/validation pr inting by SA-3015 (00 ~ 24) Alwa ys “ 000 ” Use SA-3015 printer for slip printin.
P-203 QT-2100 Programming Manual 7-2-4-13. Printer definition 0001-903 MC #01 /1 01 — Record No./File No./Printer Name/Attribution MC #02 /2 0002-903 MC #01 /10 50 MC #01 /2 : : 7-2-4-14.
P-204 Program 6 7-2-4-15. Employee HARRISON 123456 0001-801 — Employee#/Character/Record No./File No. 9999999999 0001020304 — Social security No./Program (D 12 ~D 3 ) HARRISON — Clerk character CLAPTON 000001 0002-801 0000000000 0000000000 -------- — (No clerk character is set.
P-205 QT-2100 Programming Manual 7-2-4-16. Job Code Description Choice Program code Character (within a 16-digit) (No character means no setting.) T ip declaration compulsory during clock-out operation Always “ 0 ” Pay rate ($0.00 ~ $9999.99) Overtime pay ratio (0.
P-206 Program 6 7-2-4-17. Schedule Description Choice Program code Job code (00 ~ 99) ( “ 00 ” means no select number) Start time (hour) (00 ~ 23) Start time (minute) (00 ~ 59) End time (hour) (00.
P-207 QT-2100 Programming Manual 7-2-4-18. IDC Link Description Choice Program code Always “ 0 ” Specify IDC Link file No link=0, IDC(1)=1, IDC(2)=2, IDC(3)=3 Always “ 0 ” T arget for IDC: All transactions=0, Only item/function=1 Record No. of the target for IDC Always “ 0 ” File No.
P-208 Program 6 7-2-5 Clerk 7-2-5-1. Clerk feature C 01 001-007 — Clerk name/Record No./File No. 0001 — Clerk secret code 00 — Drawer No. 000111 — Clerk No.
P-209 QT-2100 Programming Manual Record 01-067 Description Choice Program code Check number compulsory T able number compulsory Number of customer compulsory Guest receipt compulsory (at finalization).
P-210 Program 6 Record 02-067 Description Choice Program code Enable to use 1st menu sheet. Enable to use 2nd menu sheet. Enable to use 3rd menu sheet. Enable to use 4th menu sheet. Enable to use 5th menu sheet. Enable to use 6th menu sheet. Enable to use 7th menu sheet.
P-211 QT-2100 Programming Manual Record 03-067 Description Choice Program code Enable to operate in REG mode. Enable to operate in REF mode. Enable to operate in REG – mode. Always “ 0 ” Enable to operate in PGM1 mode. Enable to operate in PGM2 mode.
P-212 Program 6 Record 04-067 Description Choice Program code Enable to operate cash. Enable to operate charge. Enable to operate check. Enable to operate credit. Enable to operate new balance. Enable to operate price inquiry . Enable to operate stock inquiry .
P-213 QT-2100 Programming Manual Record 05-067 Description Choice Program code Enable to operate validation. Enable to operate receipt. Enable to operate check endorse. Enable to operate non add. Enable to operate non add/no sale. Enable to operate no sale.
P-214 Program 6 Record 06-067 Description Choice Program code Enable to operate operator X/Z. Enable to tray total. Enable to operate subtotal. Enable to operate receipt on/of f. Enable to operate T A/ST . Enable to operate operator No. Enable to operate MD/ST .
P-215 QT-2100 Programming Manual Record 07-067 Description Choice Program code Enable to operate substitution. Enable to operate House Bon. Always “ 0 ” Enable to operate operator open check. Enable to operate media change. Enable to operate seat number .
P-216 Program 6 Record 08-067 Description Choice Program code Enable to operate price. Enable to operate PLU No. Enable to operate subdepartment No. Enable to operate department No. Enable to operate list No. Enable to operate flat PLU. Enable to operate department ke y .
P-217 QT-2100 Programming Manual Record 09-067 Description Choice Program code Enable to operate arrange group 1. Enable to operate arrange group 2. Enable to operate arrange group 3. Enable to operate arrange group 4. Enable to operate arrange group 5.
P-218 Program 6 Record 10-067 Description Choice Program code Enable to issue daily X report. Enable to issue daily Z report. Enable to issue periodic 1 X report. Enable to issue periodic 1 Z report. Enable to issue periodic 2 X report. Enable to issue periodic 2 Z report.
P-219 QT-2100 Programming Manual 7-2-5-2. Clerk detail 0001-030 0001-001 GROSS — Record No./File No./Detailed total record No./ 0002-030 0002-001 NET File No./Character 0003-030 0003-001 CAID 7-2-5-3. Clerk key ID (Dallas key ID) 1234567890AB 0001-027 — Key ID.
P-220 Program 6 7-2-6 Key feature 7-2-6-1. PLU PLU0001 0001-004 — PLU descriptor/Record No./File No. 000000000000 — Elementary program † 11-066 000000 — Refer to the record 11-066 † 12-066 000000 — Refer to the record 12-066 † 13-066 0000 — Refer to the record 13-066 † 14-066 0 — Refer to the record 14-066 † 15-066 @0.
P-221 QT-2100 Programming Manual Elementary program Description Choice Program code Single item control: (Not ef fectiv e for PLU 2nd@) Normal receipt = 0, Single item receipt = 3 Selecti ve item stat.
P-222 Program 6 Record 11-066 Record 12-066 Record 13-066 Record 14-066 Record 15-066 Record 16-066 Description Choice Program code PLU random code (only for PLU) Significant numbers :::::: D 6 D 5 D .
P-223 QT-2100 Programming Manual Record 17-066 Record 20-066 Record 21-066 Description Choice Program code Number of Bon receipts (1 ~ 9) (If “ 0 ” , no Bon is issued.
P-224 Program 6 7-2-6-5. Function key 0001 CASH 000000000000 — Record No./Key descriptor/Parameter 0002 CHARGE 000000000000 0003 CREDIT 000000000000 0004 %+ 000000000000 0005 CLEAR 000000000000 0006.
P-225 QT-2100 Programming Manual Programming for new balance *1 Those are valid options for AUTO CASH as well. *2 Those are valid options for Single item as well. *3 Those are valid options for Cashing a check as well. *4 Those are valid options for Currency exchange (include partial tender) as well.
P-226 Program 6 Programming for character print Description Choice Program code Start record number of displaying “ TEXT RECALL WINDOW ” ( “ 00 ” means “ 01 ” .) Allow clerk or mode change after the “ text recall ” key depression. (ef fectiv e only for “ text recall ” ke y) Print characters to sales receipt printer .
P-227 QT-2100 Programming Manual Programming for check print Programming for clerk transfer Programming for table transfer Programming for tip Description Choice Program code Number of back feed lines.
P-228 Program 6 Programming for loan, pick up Programming for received on account, paid out Description Choice Program code Allowable number of validation printing ( “ 0 ” means no limitation) Force v alidation operation.
P-229 QT-2100 Programming Manual Programming for plus, minus, coupon Description Choice Program code Multiple validation (If “ No ” , only one validation printing is possible.
P-230 Program 6 Programming for discount, premium Description Choice Program code Multiple v alidation (If “ No ” , only one v alidation printing is possible.
P-231 QT-2100 Programming Manual Programming for deposit+, deposit – Programming for void Programming for check endorsement Description Choice Program code Force validation operation. (only effecti ve after receipt issuance) Multiple validation (If “ No ” , only one validation is possible.
P-232 Program 6 Programming for receipt Programming for #, #/NS Description Choice Program code Allow mode change or clerk change after non add registration as first transaction. (only for non-add function) Order character record number (00 ~ 99): ( “ 00 ” means no setting.
P-233 QT-2100 Programming Manual Programming for arrangement Programming for customer Description Choice Program code Input method: Allow replacement = 0, Prohibit replacement = 1, Add enter value = 2 Always “ 000000 ” : D 7 ;;;;;; D 6 D 5 D 4 D 3 D 2 D 1 Significant number Description Choice Program code Enable operation in REG mode.
P-234 Program 6 Programming for currency exchange Programming for slip Programming for T/S, TAST Description Choice Program code T axable status (00, 01 ~ 10) ( “ 00 ” means taxable 1.
P-235 QT-2100 Programming Manual Programming for open Programming for open 2 Description Choice Program code Release high amount limit Always “ 000000 ” : D 7 ;;;;;; D 6 D 5 D 4 D 3 D 2 D 1 No = 0 Y es = 1 Description Choice Program code Release customer number compulsory .
P-236 Program 6 Programming for multiplication, quantity/for, square, cube, Ketten Bon Description Choice Prog ram code Multiplication procedure: (Ketten Bon and <X> only) 1 Quantity × Amount, .
P-237 QT-2100 Programming Manual Programming for selective item subtotal Programming for open check Programming for list Programming for cancel Description Choice Program code Selective item status (0.
P-238 Program 6 Programming for clock-in/clock-out Programming for tax exempt Description Choice Program code The purpose of uses: Use both clock-in and clock-out = 0 Use only clock-in = 1 Use only clock-out = 2 Print when clock-in or clock-out keys are pressed.
P-239 QT-2100 Programming Manual Programming for break-in/break-out Programming for eat-in/take-out Description Choice Program code The purpose of uses: Use both break-in and break-out = 0 Use only break-in = 1 Use only break-out =2 Always “ 0 ” : D 2 ; D 1 Significant numbers Description Choice Program code U.
P-240 Program 6 Programming for store Description Choice Program code Shift: 1 Status, 2 Staydown Def ine assigning shift PLU number . (0, 1 ~ 8) ( “ 0 ” is treated as “ 1 ” .) : D 2 : D 1 1 = 0 2 = 1 Significant number Programming for shift PLU Description Choice Program code Enable to open the finalized check.
P-241 QT-2100 Programming Manual 7-2-6-6. Scanning PLU link SCANNING USED RECS 0002 / 0010 — Header/Used record No./Allocated record No. 0001-016 02833521>>>>> 0217 — Record No.
P-242 Program 6 7-2-7 Keyboard 1-------------------------------------- — Menu sheet number 001.RCT 0001 002 073 — Hard key code/Key descriptor/Record No./File No. 002.NEW/OLD 0002 002 093 /Function code 003.RC 0003 002 091 : : 168.PLU0093 0093 004 063 2-------------------------------------- 001.
P-243 Index ............................................................................................................... P-244 Program 3 mode Hierarchy .......................................................................................... P-247 Program 1 mode Hierarchy .
P-244 Index Inde x A Accumulate touch PLU menus P-56 Add mode P-41 Allow finalization operation when subtotal is zero P-43 Allow more than one transaction in RF mode P-43 Allow numeric entries P-43 Al.
P-245 J Job Code P-73, P-74, P-205 Journal control P-51 K Ketten Bon P-131 Key allocation P-24 Key location change P-26 Keyboard layout P-27 L Limit of number Plus, Minus, Premium, Discount key P-42 L.
P-246 Index S Scanning PLU link P-136 Schedule P-74, P-206 Scheduler P-58 Selective item subtotal P-131 Sentinel amount P-41 Set menu table P-36 Set menu/condiment P-53 Shift PLU P-134, P-135 Slip P-1.
P-247 Program 3 mode Hierarchy Pulldown group ————————————————————————————— Machine feature ———— Program 3 Set menu table ————.
P-248 Index Program 1 mode Hierarchy PLU —————————————————————————————————— Unit price/Q ’ ty ————— Program 1 PLU 2nd @ .
P-249 Program 6 mode Hierarchy PLU unit price ———————————— Unit price & quantity ——————— Program read report —— Program 6 PLU 2nd @ ———————.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuy a-ku, T okyo 151-8543, J apan IR0202-003001-A Printed in Japan QT-2100 PGM*E c.
Ein wichtiger Punkt beim Kauf des Geräts Casio QT-2100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Casio QT-2100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Casio QT-2100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Casio QT-2100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Casio QT-2100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Casio QT-2100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Casio QT-2100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Casio QT-2100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Casio QT-2100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.