Benutzeranleitung / Produktwartung 54710 des Produzenten AEG
Zur Seite of 38
FAVORIT 547 1 0 Dishwasher Oper ating instructions 152976 12/1en 27-05-2002 11:44 Pagina 1.
2 Dear customer! Please read these user instructions car efully . Above all please observe the safety instructions on the first few pages of these user instructions! Please keep these user instructions for later refer ence. P ass them on to any subsequent owner of the appliance.
3 Contents Safety instructions 4 Disposing of packaging and old machine 6 Disposing of the packaging 6 Disposing of your old machine 6 Economical and ecological dishwashing 7 Description of the applia.
4 Safety instructions The safety of AEG electrical appliances conforms to accepted rules of technology and the Appliance Safety Act. We as manufactur er s, however , see ourselves as being obliged to familiarise you with the following safety instructions.
5 Y our dishwasher in day-to-day use ● Never operate your dishwasher if the electrical supply lead, supply or dr ainhose, control panel, worktop or plinth ar e damaged. ● If there is a fault, fir st turn the water tap off. Then switch off your machine and pull the plug out of the socket.
Marking of plastic parts for graded r ecycling: all plastic parts in your machine ar e marked with internationally standardised abbr eviations (e.g. <PS> for polystyr ene). When your machine is disposed of, this enables plastic waste to be sorted into individual types for environmentally conscious r ecycling.
7 Economical and ecological dishwashing ● Only connect the dishwasher to the hot water supply if your hot water is not electrically heated. ● Ensure that the water softener is corr ectly adjusted. ● Do not pre-rinse under running water . ● Select the wash progr amme to suit the natur e and degree of the soiling on the dishes.
8 Description of the appliance IN138 The inside of the appliance 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Detergent dispenser 6. Control panel 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10 . Upper basket 11 .
9 Contr ol panel 1. Pr ogramme selection push buttons 2. Delay start push button This option allows the start of the progr amme to be delayed by 3, 6 or 9 hour s.
10 Befor e using your dishwasher for the first time 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener . 4. P our 1 litr e of water inside the salt container and then fill with salt.
11 T o select a different level be sur e that the dishwasher is off and then pr oceed as follows: 1. Press INTENSIV 7 0° and NORMAL 65° programme push buttons simultaneously . 2. While keeping the progr amme push buttons INTENSIV 7 0° and NORMAL 65° pressed, switch on the dishwasher by pr essing the On/Off push button.
12 T o fill: 1. To fill with salt, unscr ew the cap of the salt container . 2. Pour 1 litr e of water inside the container (this is necessary only before filling with salt for the first time). 3. Using the funnel provided, pour in the salt until the container is full.
13 When this has been done, all that is requir ed is to periodically top up the container with salt. Y ou ar e reminded of this by the salt container indicator light on the control panel which comes on when the salt has run out.
14 T o deactivate the rinse aid indicator light be sure that the dishwasher is off and then pr oceed as follows: 1. Press INTENSIV 7 0° and NORMAL 65° programme push buttons simultaneously . 2. While keeping the progr amme push buttons INTENSIV 7 0° and NORMAL 65° pressed, switch on the dishwasher by pr essing the On/Off push button.
15 Adjusting the dose According to the finish and drying r esults obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if ther e ar e drops of water or lime spots on the dishes after washing.
16 Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher . For washing in the dishwasher the following cutlery/dishes are not suitable: ● Cutlery with wooden, horn, china or mother of pearl handles.
17 The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arr anged around the edge of the basket, ensuring that the upper spray arm can turn fr eely .
18 Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles pr otrude fr om the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing downwar ds. Mix spoons with other cutlery to prevent the fr om sticking together .
19 The upper basket T he upper basket is designed for plates (dessert plates, saucers, dinner plates up to 24 cm in diameter), salad bowls, cups and glasses. Glasses with long stems can be placed upside- down in the cup-racks The cup-rack on the left folds upwar ds to incr ease your loading flexibility .
20 Use of deter gent Attention! Only use detergents specifically designed for use in dishwashers . If using powder detergents pr oceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent accor ding to the recommended quantity given in the "Washing pr ogr ammes" chart.
21 Compact deter gents with enzymes In these compact powders the envir onmentally unfriendly components have been replaced by natur al enzymes and other mor e biodegradable substances. The enzymes deploy their full dirt dissolving power at a temperatur e as low as 50°C.
22 W ashing pr ogr ammes Progr amme T ype of soil and type of load Light soil. Crockery and cutlery Normal soil. Crockery and cutlery Normal soil. Crockery and cutlery Heavy soil.
23 Progr amme duration in minutes Energy consumption in kWh Water consumption in litres Cycle description Approximate values * 94 ÷ 1 04 1,89 18 79 ÷ 89 1,15 14 43 ÷ 53 0,79 1 1 79 ÷ 89 0,99 14 Ho.
24 Oper ating instructions 1. Check the filters Ensure they ar e clean and pr operly positioned (see "Maintenance and cleaning"). 2. Pr ess the On/off push button The On/Off indicator light will come on. 3. Check that ther e is rinse aid and salt The corresponding indicator lights will illuminate if r efilling is necessary .
25 8b . Setting and starting the pr ogramme with delay start The setting of the delay start occurs befor e selecting the pr ogramme. Press the delay start push button and selected the desir ed time (3, 6 or 9 hours) until the indicator light corr esponding to the chosen hour s flashes.
26 Caution! In general it is not advisable to open the door while the machine is working; if the door is opened however , a safety device ensures that the machine stops. Caution! Opening the door could let very hot steam escape: you risk being scalded! Open the door with great car e.
27 Maintenance and cleaning Internal and external cleaning If necessary , clean the controls only with a soft cloth and pur e warm water . The spray arms do not need cleaning. Occasionally check the internal containers, door seal and water inlet for soiling, clean if necessary .
28 6. Remove the flat filter (4) from the base of the washing compartment and clean both faces thoroughly . 7. Put the flat filter back in the base of the washing compartment. 8. Place the coarse/fine filter in the microfilter and pr ess together . 9.
29 ...."washing" and "drying" phase indicator lights are flashing ....one or more phase indicator lights are flashing Protection against flooding is active. General Close the water tap and contact the Service Force Centre. Switch off the dishwasher .
30 ....the door is difficult to close The dishwasher is not level or not properly built-in. Refer to Installation instructions. Malfunction ....the progr amme does not start ....the machine is noisy The plug is not properly inserted in the power socket.
31 Customer service In the section "What to do, if...", we have listed the most important faults which you can rectify your self. Should you still wish to call our Service Centr e for any of.
32 T echnical specifications This appliance complies with the following E.E.C. Directives: - 73/23/CEE of 19/02/73 (Low V oltage Dir ective) and subsequent modifications; - 89/336/CEE of 03/05/89 (Electromagnetic Compatibility Dir ective) and subsequent modifications.
33 Hints for test centr es Test standar d Load Rinse aid selector Detergent dosage Reference pr ogramme EN 50242 position 4 - 20 g in the dispenser - 5 g on the dispenser lid 9 standard place settings - Eco 50° Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser .
34 Fitting under a counter (kitchen worktop or sink) By removing the machine’ s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the r ecess correspond to those shown in the pictur e.
35 Connection instructions Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work requir ed to install this appliance should be carried out by a qualified plumber or competent person.
36 W ater outlet connection The end of the drain hose can be connected as follows: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. 3. To a wall outlet pr ovided with vent-hole, minimum internal diameter 4 cm.
37 Safety standards r equir e the appliance to be earthed. The Manufacturer accepts no liability for failur e to observe the above safety precautions . Pr otection against flooding The machine is fitted with a device in the bottom of the machine to protect against flooding.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Copyright by AEG Subject to change without notice 152976 12/1 GB From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use.
Ein wichtiger Punkt beim Kauf des Geräts AEG 54710 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AEG 54710 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AEG 54710 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AEG 54710 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AEG 54710 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AEG 54710 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AEG 54710 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AEG 54710. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AEG 54710 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
