Benutzeranleitung / Produktwartung MVX20i des Produzenten Canon
Zur Seite of 164
Digital Video Camcorder Instruction Manual English PA L CANON INC. Canon Europa N.V . P .O. Box 2262, 1180 EG Amstelveen, the Netherlands Canon UK Ltd. CCI Service Centre, Unit 130 Centennial Park, Borehamwood, Hertfor dshire, WD6 3SE, England T elephone 0870-241-2161 Canon Australia Pty .
2 Impor tant Usage Instructions W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
3 Introduction E Using this Manual Thank you for purchasing the Canon MVX25i/MVX20i. Please read this manual carefully before you use the camcorder and retain it for future reference. Change the display language before you begin ( 77). Symbols and References Used in This Manual ❍ :P r ecautions r elated to the camcorder operation.
4 T able of Contents Introduction Important Usage Instructions ........................................................................................2 Using this Manual ................................................................................
5 Introduction E Changing the Remote Sensor Mode ..........................................................................78 Other Camcorder Settings ..........................................................................................79 Editing Recording to a VCR or Digital Video Device .
6 Checking Supplied Accessories WL-D83 Wireless Controller T wo AA (R6) Batteries Lens Cap and Lens Cap Cord Lithium Button Battery CR2025 STV -250N Stereo V ideo Cable CA-570 Compact Power Adapter (incl.
7 Introduction E Components Guide MVX25i/MVX20i * MVX25i only . REC SEARCH + button ( 25) / (fast forward) button ( 30) / CARD + button ( 112) REC SEARCH – button ( 25) / (record review) button ( 25.
8 CAMERA OFF PLA Y(VCR) NETWORK Dioptric adjustment lever ( 16) Viewfinder ( 16) Power switch ( 3) Grip belt ( 16) PHOTO button ( 97) Zoom lever ( 26) Cassette compartment ( 14) Strap mount ( 17) CHAR.
9 Introduction E S Remote sensor ( 18) DV terminal ( 82, 92) AV terminal ( 32) / (phones) terminal ( 31, 61) USB terminal ( 123, 134) Assist lamp (White LED)* ( 47) Terminal cover Terminal cover Tripo.
10 WT WIRELESS CONTROLLER WL - D83 START /STOP PHOTO ZOOM SELF T. D.EFFECTS ON/OFF SET MENU TV SCREEN REW PAUSE AV DV REMOTE SET SLOW 2 PLAY STOP FF ZERO SET MEMORY REC PAUSE 12bit AUDIO OUT DATE SEARCH DATA CODE AUDIO DUB.
11 Basic Functions - Preparations E Pr eparing the Power Supply Attaching the Battery Pack 1. T urn the POWER switch to OFF . 2. Move the viewfinder upward. 3. Attach the battery pack to the camcorder . • Remove the terminal cover of the battery pack.
12 Using a Household Power Source 1. T urn the POWER switch to OFF . 2. Connect the power cord to the power adapter . 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’ s DC IN terminal. ❍ Tu rn off the camcorder befor e connecting or disconnecting the power adapter .
13 Basic Functions - Preparations E ❍ We r ecommend charging the battery pack in temperatures between 10 ˚C and 30 ˚C. Outside the temperature range of 0 ˚C to 40 ˚C, the CHARGE indicator flashes rapidly and charging stops. ❍ A lithium ion battery pack can be charged at any charge state.
14 Loading/Unloading a Cassette Use only video cassettes marked with the D logo. 1. Slide the OPEN/EJECT switch and open the cassette compartment cover . The cassette compartment opens automatically . 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt.
15 Basic Functions - Preparations E Installing the Backup Batter y The backup battery allows the camcorder to retain date, time ( 19) and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings.
16 Pr eparing the Camcor der Adjusting the Viewfinder (Dioptric Adjustment) 1. T urn on the camcorder and keep the LCD panel closed. 2. Pull out the viewfinder . 3. Adjust the dioptric adjustment lever . Attaching the Lens Cap 1. Attach the cord to the lens cap.
17 Basic Functions - Preparations E Attaching the Shoulder Strap Pass the ends through the strap mount and adjust the length of the strap. SS-900 Shoulder strap.
18 Using the Wir eless Contr oller Point it at the camcorder’ s remote sensor when you press the buttons. Inserting Batteries The wireless controller operates with two AA (R6) batteries. 1. Open the battery cover . 2. Insert the batteries following the + and – markings.
19 Basic Functions - Preparations E Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder , or when you have replaced the backup battery . Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu.
20 7. Press the MENU button to close the menu and to start the clock. Once you have set time zone, date and time, you do not need to reset the clock each time you travel to another time zone. Just set the time zone to the one of your destination, and the camcorder automatically adjusts the clock.
21 Basic Functions - Preparations E Displaying Date and Time during Recording Y ou can display the date and time in the lower left corner of the screen. 1. Press the MENU button to open the menu. 2. T urn the SET dial to select [DISPLA Y SETUP/ ] and press the SET dial.
22 Recor ding Movies on a T ape Before Y ou Begin Recording Make a test recording first to check if the camcorder operates correctly . Before you make important recordings, clean the video heads ( 147). Recording 1. Remove the lens cap. 2. Set the camcorder to CAMERA mode.
23 Basic Functions - Recording E ❍ W ait until the tape counter stops completely before you start r ecording. ❍ When you do not remove the cassette, you can r ecord the next scene without producing any noise or blank sections between the r ecordings even if you turn the camcorder of f.
24 2. T urn the SET dial to select [DISPLA Y SETUP/ ] and press the SET dial. 3. T urn the SET dial to select [LCD MIRROR] and press the SET dial. 4. T urn the SET dial to select [OFF].
25 Basic Functions - Recording E Reviewing and Searching when Recor ding Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly . Press and r elease the c (recor d review) button.
26 Zooming The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom. Optical Zoom Move the zoom lever toward W to zoom out (wide- angle). Move it toward T to zoom in (telephoto).
27 Basic Functions - Recording E Digital Zoom 1. Press the MENU button to open the menu. 2. T urn the SET dial to select [CAMERA SETUP] and press the SET dial. 3. T urn the SET dial to select [D.ZOOM] and press the SET dial. 4. T urn the SET dial to select a setting option.
28 Tips for Making Better V ideos Holding the Camcorder For maximum stability , grip the camcorder in your right hand and keep your right elbow pressed against your body . If necessary , support the camcorder with your left hand. Be careful that your fingers do not touch the microphone or lens.
29 Basic Functions - Playback E Playing Back a T ape If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette ( 147). 1. Set the camcorder to PLA Y (VCR) mode.
30 Special Playback Modes e / a (Playback Pause) To pause playback, press the e / a button during normal playback. 1 (Fast Forward Playback) / ` (Rewind Playback) Plays back the tape at 11.5 times normal speed (forward or reverse). Press and hold the button during normal playback or fast forward.
31 Basic Functions - Playback E Adjusting the V olume When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker . The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder .
32 Playing Back on a TV Scr een The A V terminal also serves as headphones terminal. When “ H ” is displayed on the screen, change the setting following the procedure below . Open the menu and select [VCR SETUP]. Select [A V/PHONES H ], set it to [A V] and close the menu.
33 Basic Functions - Playback E 4. If connecting to a TV , set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. The supplied PC-A10 SCART Adapter is for output only . For analog line-in r ecor ding or analog-digital conversion, please use a SCART Adapter with input capability (commercially available).
34 TVs with S (S1)-Video Input T erminal Refer also to the TV or VCR instruction manual. 1. T urn off all devices before starting the connections. 2. Connect the S-150 S-video Cable (optional) to the S-video terminals. 3. Connect the STV -250N Stereo Video Cable to the camcorder’ s A V terminal and the audio terminals of the TV/VCR.
35 Basic Functions - Playback E Selecting the Audio Output Channel Y ou can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. T urn the SET dial to select [AUTO SETUP] and press the SET dial.
36 Menus and Settings Many of the camcorder’ s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Press the MENU button to open the menu. 2. T urn the SET dial to select a submenu and press the SET dial.
37 Advanced Functions E CARD MIX MIX TYPE CARD CHROMA , CARD LUMI., 117 CAM. CHROMA, C. ANIMATION ANIMAT. TYPE CORNER , STRAIGHT, RANDOM MIX LEVEL CAMERA SETUP SHUTTER AUTO , 1/50, 1/120, 1/250, 1/500, 1/1000, 55 1/2000 A.
38 SYSTEM WL. REMOTE A 1 , A 2, OFF B 78 BEEP ON , OFF 79 T.ZONE/DST See list of time zones. 19 D/TIME SET 19 MY CAMERA S-UP SOUND OFF, DEFAULT , MY SOUND 76 SHTR SOUND OPER.
39 Advanced Functions E PLA Y (VCR) MENU CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA VCR SETUP REC MODE SP, LP 58 AV/PHONES H AV , PHONES H 32 AV DV OUT ON, OFF 88 AUDIO SETUP OUTPUT CH L/R , L/L, R/R 35 AUDIO DUB.
40 MY CAMERA S-UP SOUND OFF, DEFAULT , MY SOUND 76 SHTR SOUND OPER. SOUND SELF-T SOUND Submenu Menu Item Setting Options.
41 Advanced Functions E CARD CAMERA MENU CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA CAMERA SETUP SHUTTER AUTO , 1/50, 1/120, 1/250 55 A.SL SHUTTER ON , OFF 56 D.ZOOM MVX25i MVX20i 27 OFF , 56 × OFF , 48 × WHITE BAL. AUTO , SET W , INDOOR T , OUTDOOR U 53 AF AST LAMP* AUTO , OFF 103 FOCUS PRI.
42 SYSTEM WL. REMOTE A 1 , A 2, OFF B 78 BEEP ON , OFF 79 T.ZONE/DST See list of time zones. 19 D/TIME SET 19 MY CAMERA S-UP SOUND OFF, DEFAULT , MY SOUND 76 SHTR SOUND OPER.
43 Advanced Functions E CARD PLA Y MENU CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA CARD PRINT ORDERS NO , YES 133 OPERATIONS ALL ERASE (Single Image TRANS.
44 Using the Recor ding Pr ograms Easy Recording Pr ogram The camcorder adjusts focus, exposure and other settings automatically , allowing you to just point and shoot. Program AE Modes Auto The camcorder adjusts focus, exposure and other settings automatically .
45 Advanced Functions - Recording E A vailability of Functions in Each Mode: A: Auto setting h : Available × : Not available : Can be used only in CAMERA mode. * MVX25i only . Selecting the Easy Recording Pr ogram Set the program selector to [ . “ [ ” appears.
46 Selecting the Program AE Mode 1. Set the program selector to Q . 2. Press the SET dial. A list of the program AE modes appears. 3. Select a mode and press the SET dial. The symbol of the mode appears on the upper left corner of the screen. ❍ The setting resets to the Auto mode when you change the position of the program selector .
47 Advanced Functions - Recording E Using the Night Modes 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SETUP]. Select [NIGHT MODE], select a setting option and close the menu. 3. Press the NIGHT MODE button. • The symbol of the selected mode appears on the screen.
48 ❍ Moving subjects may leave a trailing afterimage. ❍ Picture quality may not be as good as in other modes. ❍ White points may appear on the screen. ❍ Autofocus may not work as well as in other modes. In such case, adjust the focus manually .
49 Advanced Functions - Recording E Skin Detail Function When shooting close-ups of people, the camcorder automatically softens details to reduce the appearance of skin imperfections for a more complimentary appearance. Open the menu and select [CAMERA SETUP].
50 Adjusting Exposur e Manually Exposure Lock Y ou can lock the exposure when recording in situations where the lighting may change suddenly to control the brightness of the image. 1. Set the program selector to Q . 2. Press the EXP button. • “E.LOCK ±0” appears on the screen.
Adjusting the Focus Manually Autofocus may not work well on the following subjects. In such case, focus manually . 1. Set the program selector to Q . 2. Adjust the zoom. When you operate the zoom after adjusting the focus, the subject may not stay in focus.
52 4. T urn the focus ring to adjust the focus. •T urn the focus ring until the image appears focused. •P r ess the FOCUS button to r eturn to autofocus. ❍ The setting resets to autofocus when you switch the pr ogram selector to [ . ❍ Readjust the focus when you have turned off the camcorder .
53 Advanced Functions - Recording E Setting the White Balance Y ou can use the preset modes to reproduce colours more accurately , or set a custom white balance to obtain the optimal setting. 1. Set the program selector to Q . 2. For custom white balance: Point the camcorder at a white object and zoom in until it fills the whole screen.
54 ❍ Use the auto setting for normal outdoor scenes. ❍ When the program selector is set to [ , white balance is pr eset to [AUTO]. ❍ The camcorder r etains the custom white balance setting even if you turn it off. However , it resets to [AUTO] when you change the position of the T APE/CARD switch.
55 Advanced Functions - Recording E Setting the Shutter Speed Y ou can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the (Auto) mode. 3. Open the menu and select [CAMERA SETUP].
56 Auto Slow Shutter In Easy Recording mode and when [SHUTTER] is set to [AUTO] in Auto mode, the camcorder uses shutter speeds down to 1/25 in CAMERA mode and 1/12.5 in CARD CAMERA mode. This allows you to record brightly in places with insufficient lighting.
57 Advanced Functions - Recording E Using the Self-Timer The self-timer can be used for recording movies and still images. When recor ding movies 1. Press the (self-timer) button. “” appears. 2. Press the start/stop button. • The camcorder starts r ecording after a 10-second countdown (2 seconds when using the wireless contr oller).
58 Changing the Recor ding Mode (SP/LP) Y ou can choose between SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times. To change to LP mode, open the menu and select [VCR SETUP]. Select [REC MODE], set it to [LP] and close the menu.
59 Advanced Functions - Recording E Audio Recor ding Changing the Audio Mode Y ou can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later .
60 ❍ About the audio level indicator: When [MIC LEVEL] is set to [AUTO], the audio level indicator switches on and off with each pr ess of the AUDIO LEVEL button. ❍ The audio level can be changed when the green bar is displayed. W e r ecommend hiding the bar when you have finished adjusting to pr event accidental changes.
Wind Screen The camcorder reduces wind noise automatically . However , you can turn off the wind screen when recording indoors, or when you want the microphone to be as sensitive as possible. Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to [OFF] and close the menu.
62 Recording with an External Microphone Y ou can attach a commercially available microphone or the optional DM-50 Directional Stereo Microphone to the accessory shoe. Refer also to the instruction manual of the microphone. 1. Attach the microphone to the accessory shoe.
63 Advanced Functions - Recording E Using Digital Ef fects Faders ( 66) Begin or end scenes with a fade to or from black. The image gradually fades in. The image gradually fades out. Fade T rigger (FADE-T) The image begins as a vertical line in the centre and expands sideways until it fills the whole screen.
64 The image appears in 16 pieces. The pieces move around until the puzzle is solved. The image is divided into 16 pieces. The pieces move around and disappear . Puzzle (PUZZLE) The image appears in zigzag from the top of the screen. Black stripes appear in zigzag from the bottom of the screen until they cover the whole image.
65 Advanced Functions - Recording E Multi-Image Screen ( 68) Captures moving subjects in 4, 9 or 16 sequences of still images and displays them at one time. Sound will be recorded normally . 9 Sequences 4 Sequences 16 Sequences Effects ( 67) Add flavour to your recordings.
66 A vailability of Digital Effects by Operating Modes: h : A vailable i : Not available * : Black and White only . CAMERA Movies Still Images PLAY (VCR) CARD CAMERA CARD PLAY Faders hi h i i Effects hi h h * i Multi-image hi h i i screen Selecting a Fader In CAMERA mode, set the program selector to Q .
67 Advanced Functions - Recording E Selecting an Effect In CAMERA mode, set the program selector to Q . 1. Press the DIGIT AL EFFECTS button. [D.EFFECT | ], [F ADER], [EFFECT] and [MUL TI-S] appear . 2. Select [EFFECT]. 3. Select the effect. 4. Press the DIGIT AL EFFECTS button.
68 Using the Multi-Image Screen Y ou can operate the multi-image screen only in the following playback modes: - When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback -W hen [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pause In CAMERA mode, set the program selector to Q .
69 Advanced Functions - Recording E ❍ Tu rn off the digital effect when you do not use it. Press the DIGIT AL EFFECTS button to open the menu. Select [D.EFFECT | ] and press the DIGIT AL EFFECTS button. ❍ The camcorder r etains the setting even if you turn it off or change the program AE mode.
70 Magnifying the Image The playback image can be magnified up to 5 times. 1. Move the zoom lever toward T . • The image is magnified by 2 times. •A frame appears indicating the position of the magnified area. •T o further enlarge the image, move the zoom lever towar d T .
71 Advanced Functions - Playback E Displaying the Data Code The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). When you play back a tape, you can display the data code and select the data code combination you wish to display .
72 Displaying the Data Code Press the DA T A CODE button. ❍ The data code will not display the next time you turn on the camcorder . ❍ Only date and time appear in CARD PLA Y mode. Six-Second Auto Date Date and time appear for 6 seconds when you begin playback, or to indicate that date or time zone has changed.
73 Advanced Functions - Playback E End Sear ch When you have played back a tape, you can use this function to locate the end of the last recorded scene. In stop mode, press the END SEARCH button. • ”END SEARCH“ appears. • The camcorder r ewinds/fast forwards the tape, plays back the last few seconds of the r ecording and stops the tape.
74 Retur ning to a Pr e-marked Position If you wish to return to a particular scene later , mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. This function is operated with the wireless controller .
75 Advanced Functions - Playback E Date Sear ch Y ou can locate the change of the date/time zone with the date search function. This function is operated with the wireless controller . Press the + or - button to begin searching. •P r ess mor e than once to search for further date changes (up to 10 times).
76 Customizing the Camcor der Y ou can personalise your camcorder by customizing the start-up image and the sound it makes for start-up, shutter , operation and self-timer (collectively called the My Camera settings). Changing the My Camera Settings 1.
77 Advanced Functions - Other Functions E Changing the Display Language The language used in the camcorder displays and menu items can be changed to German, Spanish, French, Italian, Russian, Simplified Chinese or Japanese. To change the display language, open the menu and select [DISPLA Y SETUP/ ].
78 Changing the Remote Sensor Mode T wo remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby . Tu r ning the Remote Sensor Off Open the menu and select [SYSTEM]. Select [WL.
79 Advanced Functions - Other Functions E Other Camcor der Settings Beep Y ou will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, and unusual conditions of the camcorder . If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off.
80 Tu r ning Off the Image Stabilizer The image stabilizer compensates for camcorder shake even at full telephoto. It tries to compensate for horizontal movements; therefore, you may decide to turn it off when you mount the camcorder on a tripod. Open the menu and select [CAMERA SETUP].
81 Advanced Functions - Other Functions E LCD Backlight The LCD backlight is brighter when the camcorder is powered from a household power source. However , you can set the backlight at battery use to the same brightness. Open the menu and select [DISPLA Y SETUP/ ].
82 Recor ding to a VCR or Digital V ideo Device Y ou can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality .
83 Editing ❍ When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original. ❍ When connecting a digital video device: -I f the picture does not appear , reconnect the DV cable or turn the camcorder off and back on again.
84 Recor ding fr om Analog V ideo Devices (VCR, TV or Camcor der) Y ou can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder . 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen ( 32).
85 Editing E Recor ding fr om Digital V ideo Devices (DV Dubbing) Y ou can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality . 1. Connect the camcorder to the digital video device. See Connecting a Digital Video Device ( 82).
86 Concerning Copyright Copyright Precaution Certain pre-recorded video tapes, films and other materials, as well as some television programmes are copyrighted.
87 Editing E Conver ting Analog Signals into Digital Signals (Analog-Digital Conver ter) By connecting the camcorder to a VCR or 8mm video camcorder , you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal.
88 Tu r ning On the Analog-Digital Converter Open the menu and select [VCR SETUP]. Select [A V DV OUT], set it to [ON] and close the menu. ❍ Headphones cannot be used during analog-digital conversion. ❍ Depending on the signal sent from the connected device, the conversion fr om analog to digital signals might not work properly (e.
89 Editing E Audio Dubbing Y ou can add sound from audio devices (AUDIO IN) or with the built-in or an external microphone (MIC. IN). This function is operated with the wireless controller . Connecting q Connecting an Audio Device Refer also to the instruction manual of the connected device.
90 5. Press the AUDIO DUB. button on the wir eless controller . “AUDIO DUB.” and “ a ” appear . 6. Press the P AUSE a button on the wireless contr oller to begin dubbing. • Microphone: Speak into the micr ophone. • Audio device: Begin playback.
91 Editing E Playing Back the Added Sound Y ou can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds. 1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu.
92 Connecting to a Computer Using a DV (IEEE1394) Cable Y ou can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or IEEE1394 capture board. Use the editing software supplied with your computer/ capture board to transfer video recording from tape to computer .
93 Using a Memory Card E Inser ting and Removing a Memor y Car d Y ou can use SD Memory Cards or commercially available MultiMediaCards with this camcorder . The SD Memory Card has a protect switch to prevent accidental erasure. Inserting the Card 1. T urn off the camcorder .
94 Selecting the Image Quality/Size Changing the Still Image Quality Y ou can choose from Superfine, Fine and Normal. Open the menu and select [CARD SETUP]. Select [IMG QUALITY], set it to [SUPER FINE] or [NORMAL] and close the menu. Changing the Still Image Size Y ou can choose from 1632 × 1224 pixels, 1280 × 960 pixels and 640 × 480 pixels.
95 Using a Memory Card E Changing the Movie Size Y ou can choose from 320 × 240 pixels and 160 × 120 pixels. Open the menu and select [CARD SETUP]. Select [MOVIE SIZE], set it to [160 × 120] and close the menu. ❍ Movies are r ecorded in the Motion JPEG format.
96 To change the setting, open the menu and select [CARD SETUP]. Select [FILE NOS.], set it to [RESET] and close the menu. CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA FILE NOS.••••CONTINUOUS CARD SETUP ( 36) 101-0101 101 101-0102 101-0104 101 101-0101 101 101-0103 CONTINUOUS RESET When you record 3 images.
97 Using a Memory Card E Recor ding Still Images on a Memor y Car d Y ou can record still images with the camcorder , from a tape in the camcorder or from devices connected via the DV terminal or A V terminal. Y ou can also record a still image on the memory card while you record a movie on the tape.
98 ❍ Connection to a computer or PictBridge compliant printer will not work when the memory card contains mor e than 1800 images. For best performance, we r ecommend not r ecording mor e than 100 images on the memory card when you plan to connect the camcorder to a computer or printer .
99 Using a Memory Card E Recording fr om a T ape in the Camcorder 1. Play back the tape. 2. Press the PHOTO button halfway when the scene you wish to r ecord appears. • The camcorder pauses playback. The r emaining image capacity and other information appear .
100 When recor ding from a tape in the camcor der or other video devices: ❍ A still image recor ded from an image in 16:9 format will be vertically compressed. ❍ The data code of the still image will reflect the date and time it has been r ecor ded on the memory card.
101 Using a Memory Card E Using the Flash Y ou can use the built-in flash for recording still images in dark places. The flash is equipped with the red-eye reduction mode that reduces the red-eye effect that occurs when recording people at night or in dark rooms.
102 Recording with Flash 1. Press the PHOTO button halfway . •” ” appears in green. • In CAMERA mode, the flash can be used in recor d pause mode when [STILL I. REC] is set to [ FINE] or [ NORMAL]. 2. Press the PHOTO button fully . The flash fires.
103 Using a Memory Card E ❍ About the AF-Assist Lamp: When recor ding still images with flash, the AF-assist lamp (white LED) lights up r esponding to the brightness of the subject to enable the camcor der to focus more accurately .
104 Reviewing a Still Image Right after Recor ding Y ou can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded. Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting option and close the menu. ❍ A still image is displayed as long as you hold the PHOTO button after r ecor ding.
105 Using a Memory Card E Recor ding Motion JPEG Movies on a Memor y Car d Y ou can record Motion JPEG movies with the camcorder , from a tape in the camcorder or from devices connected via the DV terminal or the A V terminal. The sound of a movie recorded on a memory card will be monaural.
106 Screen Displays during Movie Recor ding q Card Access Display w Movie recor ding time e Image Size r Remaining Card Capacity for Movies “ e ” appears and “ ” moves to indicate that the camcorder is writing on the memory card. Indicates the recor ding time of the movie.
107 Using a Memory Card E Selecting the Focusing Point The subject you wish to record is not always in the centre of the screen. In the Focus- Priority mode, you can choose from one of three focusing points to automatically put the subject you wish into sharp focus.
108 Selecting the Drive Mode Changing the Drive Mode 1. Set the program selector to Q . 2. Press the DRIVE MODE button to switch between the drive modes. The setting changes with each press of the button. Continuous Shooting/High-Speed Continuous Shooting Press and hold the PHOTO button.
109 Using a Memory Card E Auto Exposure Bracketing Press the PHOTO button. Three still images in dif ferent exposur es are recorded to the memory car d.
110 Recor ding Panoramic Images (Stitch Assist Mode) Y ou can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer . When Recording in Stitch Assist Mode: PhotoStitch detects the overlapping portion of adjoining images and merges them.
111 Using a Memory Card E 5. Record the second image so that it overlaps a portion of the first image. •M inor discrepancies in the overlapped ar ea can be corrected with the softwar e. •Y ou can retake an image by pr essing the CARD +/– button to return to the previous image.
112 Playing Back a Memor y Car d Y ou can display a single image, 6 at one time (index screen 113), or one after another (slide show 113). Use the Card Jump function to quickly locate an image without displaying them one by one ( 114). 1. Set the camcorder to CARD PLA Y mode.
113 Using a Memory Card E ❍ Images not recor ded with this camcorder , uploaded from a computer (except the sample images 119), edited on a computer and images whose file names have been changed may not be played back correctly .
114 Card Jump Function Y ou can locate images without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images. Press and hold the CARD + or CARD – button. When you release the button, the image of the displayed image number appears.
115 Using a Memory Card E Pr otecting Images Y ou can protect important images from accidental erasure when displaying a single image or index screen. If a memory card is formatted, all still images and movies, even pr otected ones, will be erased permanently .
116 Erasing Images Y ou can erase images singly or all at once. Be careful when erasing images. Erased images cannot be r ecovered. ❍ Protected images cannot be erased. ❍ Movies can only be erased when the first scene is displayed as a still image.
117 Using a Memory Card E Combining Images (Car d Mix) Y ou can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with the live video recording.
118 Card Animation (C. ANIMA TION) Combines animations with your recordings. Y ou can choose from 3 types of card animation effects. • Corner: Animation appears on the upper left and the lower right cor ner of the screen. • Straight: Animation appears on the top and bottom of the screen and moves to the right and left.
119 Using a Memory Card E 5. Select the mix type matching the sample image you have selected. • The screen shows the combined image. • When you have selected [C. ANIMA TION], select [ANIMA T . TYPE] and select between [CORNER], [STRAIGHT] and [RANDOM].
120 Camera Chroma Key Card Animation The sample images recor ded on the supplied SD Memory Card ar e intended only for the personal use with this camcorder .
121 Using a Memory Card E For matting a Memor y Car d Format new memory cards, or when you get the message “CARD ERROR”. Y ou can also format a memory card to erase all images recorded on it. ❍ Formatting a memory card erases all data, including pr otected images.
122 Cr eating a Star t-up Image Y ou can create a start-up image using a still image on the memory card. 1. Select a still image with the CARD +/– buttons. 2. Open the menu and select [MY CAMERA]. 3. Select [CREA TE ST ART -UP IMAGE]. [SET THIS AS ST ART -UP IMAGE?], [YES] and [NO] appears.
123 Direct Printing E Printing Still Images Y ou can print still images by connecting the camcorder to a printer with Direct Print function. Y ou can also use the print order settings for direct printing ( 132). Following printers can be connected to your camcorder: Connecting the Printer to the Camcorder 1.
124 ❍ If continues to flash (for more than 1 minute) or if , or does not appear , the camcorder is not corr ectly connected to the printer . In such case, disconnect the cable from camcor der and printer , turn off camcorder and printer , tur n both back on and reconnect the camcor der to the printer .
125 E Direct Printing 3. T urn the SET dial to select [PRINT] and press the SET dial. •P rinting starts. The print setting menu disappears when printing is complete. • If you wish to continue printing, select another still image with the CARD +/– button.
126 Selecting the Print Settings The procedure for selecting the number of copies and trimming ( 131) is common to all printers. Other print setting procedures vary depending on your printer model. Check which icon appears in the upper left corner of the camcorder screen after connecting, and refer to the relevant pages accordingly .
127 E Direct Printing Paper Settings 1. In the print setting menu, tur n the SET dial to select [P APER] and press the SET dial. 2. T urn the SET dial to select the paper size and press the SET dial. Select the paper size of the paper set in your printer .
128 1. In the print setting menu, tur n the SET dial to select [STYLE] and press the SET dial. 2. Make sure that (P APER) is selected and press the SET dial. Setting the Print Effect (Image Optimise) This function uses the camcorder's recording information to optimise the image data, yielding high quality prints.
129 E Direct Printing 3. T urn the SET dial to select the paper size and press the SET dial. • Select the paper size of the paper set in your printer . •P r essing the MENU button brings you back to the print settings menu. 4. T urn the SET dial to select (BORDERS) and pr ess the SET dial.
130 Selecting the Image Style 2. Make sure that (IMAGE) is selected and press the SET dial. 3. T urn the SET dial to select the image style and press the SET dial. Pressing the MENU button brings you back to the print settings menu. Selecting the Borders 2.
131 Direct Printing E T rimming Settings Set the print style before you start with the trimming settings. 1. In the print setting menu, tur n the SET dial to select [TRIMMING] and press the SET dial. The trimming frame appears. 2. Change the size of the trimming frame.
132 Printing with Print Or der Settings Y ou can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOF compatible printers ( 123).
133 E Direct Printing Erasing All Print Orders 1. Open the menu and select [CARD OPERA TIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear . 4. Close the menu. Printing 1.
134 Connecting to a Computer Using a USB Cable Y ou can download images from the memory card to a computer using the supplied software and USB cable. For details, refer to the Digital Video Software Instruction Manual . Users of Windows OS can transfer images by simply pressing the (print/share) button ( 135).
135 T ransferring Images E Dir ect T ransfer Y ou can transfer images to the computer with the (print/share) button. Preparations The first time you connect the camcorder to the computer , you need to install the software and set the auto-launch setting.
136 T ransferring All Images, New Images or Images with T ransfer Orders To transfer images with transfer order , you need to set the transfer orders ( 138). 1. T urn the SET dial to select [ ALL IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS]. 2. Press the button.
137 T ransferring Images E ❍ Y ou can press the SET dial in place of the button. W ith [ ALL IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS], a confirmation message appears. T urn the SET dial to select [OK] and press the SET dial. ❍ To cancel transfer , tur n the SET dial to select [CANCEL] and press the SET dial, or press the MENU button.
138 Selecting Images for T ransfer (T ransfer Order) Y ou can select images for transfer to the computer . These transfer settings are compatible with the Digital Print Order Format (DPOF) standards. A maximum of 998 images can be selected. Do not connect a USB or DV cable to the camcorder while setting the transfer orders.
139 Additional Information E About the NETWORK Mode The NETWORK mode is for use with DV Messenger version 2 (Windows XP only). Set the camcorder to NETWORK mode and connect it to the computer using a USB cable or DV (IEEE1394) cable. For details on DV Messenger version 2, refer to the DV Network Software Instruction Manual.
140 Scr een Displays Hiding the Displays on the LCD Screen Y ou can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLA Y SETUP/ ]. Select [DISPLA YS], set it to [OFF <PLA YBK>] and close the menu.
141 Additional Information E Screen Displays during Recor ding/Playback PLA Y (VCR) Mode Zoom ( 26) Skin detail ( 49) Self-timer ( 57) Image stabilizer ( 80) Exposure ( 50) Card mix ( 117) Digital eff.
142 CARD CAMERA Mode Still image quality ( 94) Movie size ( 95) Still image size ( 94) Remaining card capacity for still images ( 100) Stitch assist ( 110) Drive mode ( 108) Remaining card capacity fo.
143 Additional Information E Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred.
144 Message Explanation Image is recorded in a not compatible JPEG format or another format not compatible with the camcorder, or the image file is corrupted. You attempted to set more than 998 transfer orders. You attempted to transfer a movie file as wallpaper.
145 Additional Information E Message Explanation You changed the print style after you set the trimming settings. Cancel printing. Turn off the printer and turn it back on. Check the printer status. Cancel printing, disconnect the USB cable and turn off the printer.
146 Maintenance/Others Camcorder Handling Pr ecautions ❍ Do not carry the camcorder by the LCD panel or viewfinder . ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car , and high humidity .
147 Additional Information E ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Vi deo Heads ❍ When the message “HEADS DIRTY , USE CLEANING CASSETTE” appears, or when the playback picture becomes distorted, the video heads need to be cleaned.
148 How to avoid condensation: ❍ Unload the cassette, place the camcorder in an airtight plastic bag and let it adjust to temperature changes slowly before removing it from the bag. When condensation is detected: ❍ The camcorder stops operating and the warning message “CONDENSA TION HAS BEEN DETECTED” appears for approx.
149 Additional Information E ❍ Although the battery pack’ s operating temperature range is from 0 ˚C to 40 ˚C , the optimal range is from 10 ˚C to 30 ˚C . At cold temperatures, performance will temporarily decline. Warm it in your pocket before use.
150 Protecting T apes fr om Accidental Erasure To protect your recordings from accidental erasure, slide the tab on the cassette to the left. (This switch position is usually labelled SA VE or ERASE OFF .) If you load a protected cassette in CAMERA mode, the message “THE T APE IS SET FOR ERASURE PREVENTION” appears for approx.
151 Additional Information E Using the Camcorder Abr oad Power Sources Y ou can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult the Canon Service Centre for information on plug adapters for overseas use.
152 Tr oubleshooting If you have a problem with your camcorder , refer to this checklist. Consult your dealer or a Canon Service Centre if the problem persists. Power Source Problem Cause Solution Battery pack is exhausted. Battery pack is not correctly attached.
153 Additional Information E Recording Recording/Playback The camcorder malfunctions. Camcorder is not set to CAMERA mode. Time zone, date and time are not set, or the backup battery is exhausted. Camcorder is turned off. Cassette is not loaded. Tape reached the end (“ b “ flashes on the screen).
154 Camcorder is turned off, or is not set to PLAY (VCR) mode. Cassette is not loaded. Tape reached the end (“ b ” flashes on the screen). [AV/PHONES H ] is set to [PHONES H ] in the menu. [AV DV OUT] is set to [ON]. TV/VIDEO selector on the TV is not set to VIDEO.
155 Additional Information E The camcorder is set to NETWORK mode. 1. Set the camcorder to CARD PLAY mode. 2. Disconnect and reconnect the USB cable. 3. Turn off the printer and turn it back on. The printer is not operating even though camcorder and printer are correctly connected.
156 System Diagram (A vailability differs fr om area to area) VFL-1 Video Flash Light VL-3 Video Light DM-50 Directional Stereo Microphone CV -150F/CV -250F DV Cable S-150 S-video Cable MultiMediaCard.
157 Additional Information E Optional Accessories Use of genuine Canon accessories is recommended. This product is designed to perform optimally when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
158 TL-H34 T ele-converter This T ele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the T ele-converter is attached. • The minimum focusing distance with the TL-H34 is 2.
159 Additional Information E SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. VFL-1 Video Flash Light This video flash light allows you to record still images and movies even at night or in dark places.
160 Specifications MVX25i/MVX20i System 2 rotary heads, helical scanning DV system (consumer digital VCR SD system), digital component recording PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch) CCIR standard (625 lines, 50 fields) PAL colour signa l 1/3.
161 Additional Information E W eight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 0 – 40 ˚C 32 × 24 × 2.1 mm 2 g Capacity Interface Operating temperature Dimensions Weight ø3.
162 Index 12bit audio . . . . . . . . . . . . . . . . . . 91 16:9 widescreen . . . . . . . . . . . . . . 79 6-second auto date . . . . . . . . . . . . 72 Abroad, using the camcorder . . . 151 Accessories. . . . . . . . . . . . . . . . 6, 157 Advanced accessory shoe .
2 Impor tant Usage Instructions W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Digital Video Camcorder Instruction Manual English PA L CANON INC. Canon Europa N.V . P .O. Box 2262, 1180 EG Amstelveen, the Netherlands Canon UK Ltd. CCI Service Centre, Unit 130 Centennial Park, Borehamwood, Hertfor dshire, WD6 3SE, England T elephone 0870-241-2161 Canon Australia Pty .
Ein wichtiger Punkt beim Kauf des Geräts Canon MVX20i (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon MVX20i noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon MVX20i - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon MVX20i reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon MVX20i erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon MVX20i besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon MVX20i verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon MVX20i. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon MVX20i gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
