Benutzeranleitung / Produktwartung LV-5200 des Produzenten Canon
Zur Seite of 48
E English Multimedia Pr ojector Owner’ s Manual L V -5200.
2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cor d for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT (RGB Scart 21-Pin Video Input) 22 VIDEO INPUT 31 SETTING 36 APPENDIX 38 PREP ARA TION 7 NOMENCHTOR 7 SETTING-UP THE PROJ.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NOMENCHT OR BO TT OM BACK HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable object near these vents. ● Keep front grills at least 3 ’ (1m) away from any object, especially heat- sensitive objects.
SETTING-UP THE PR OJECT OR 8 PREP ARA TION This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor.
9 PREP ARA TION POSITIONING THE PR OJECT OR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 3.6 ’ (1.1m) ~ 31.8 ’ (9.7m). ● Refer to the figure below to adjust a screen size. ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating the Adjustable Feet.
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump the projector, otherwise damage or malfunction may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case.
COMPUTER A UDIO IN S – VIDEO IN A UDIO IN VIDEO IN A UDIO OUT RGB IN-1 / OUT RESET CONTROL PORT Y Pb/Cb Pr/Cr R L R L DVI - I RGB IN-2 11 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR When controlling your computer with the Remote Control Unit of this projector, connect the mouse port of your computer to this connector.
12 CONNECTING THE PR OJECT OR CONNECTING T O COMPUTER COMPUTER A UDIO IN S – VIDEO IN A UDIO IN VIDEO IN A UDIO OUT RGB IN-1 / OUT RESET CONTROL PORT Y Pb/Cb Pr/Cr R L R L DVI - I RGB IN-2 ON 1 DIP .
13 CONNECTING THE PR OJECT OR CONNECTING T O VIDEO EQUIPMENT COMPUTER IN 1 DVI - I MONITOR OUT S – VIDEO COMPUTER IN 2 / (MONO) R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr AUDIO IN COMPUTER.
14 BEFORE OPERA TION V OLUME PO WER FOCUS ZOOM D.ZOOM MENU MUTE LASER NO SHO W FREEZE A UTO PC ADJ. IMA GE P-TIMER INPUT KEYST ONE OPERA TION OF THE REMO TE CONTR OL UNIT ON ALL OFF ALL-OFF SWITCH Left Side When using the Remote Control Unit, turn this switch to “ ON.
15 BEFORE OPERA TION To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace both batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid.
MENU SET FOCUS ZOOM INPUT KEY STONE PO WER IMA GE V ol + V ol – READ Y LAMP REPLA CE LAMP W ARNING TEMP . 16 BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close ON- SCREEN MENU operation. (P17, 18) MENU BUTTON KEYSTONE BUTTON READY INDICATOR SET BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP.
17 BEFORE OPERA TION HO W T O OPERA TE THE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press the MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Move the POINTER (red frame) to the MENU ICON that you want to select by pressing the POINT RIGHT / LEFT buttons.
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22-24) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / Color / Tint / White balance (.
19 B ASIC OPERA TION TURNING ON THE PR OJECT OR TURNING OFF THE PR OJECT OR Press the POWER ON-OFF button on the Top Control or on the Remote Control Unit, and the message “ Power off? ” appears on a screen. Press the POWER ON-OFF button again to turn off the projector.
20 Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. PICTURE FREEZE FUNCTION KEYST ONE ADJUSTMENT B ASIC OPERA TION ADJUSTING THE SCREEN Message disappears after 4 seconds.
21 B ASIC OPERA TION Press the NO SHOW button on the Remote Control Unit to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHO W FUNCTION Message disappears after 4 seconds. No show Press the P-TIMER button on the Remote Control Unit.
22 COMPUTER INPUT (RGB Scar t 21-Pin Video Input) SELECTING THE INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose either Computer 1 or Computer 2 by pressing the INPUT button on the Top Control or on the Remote Control Unit.
23 COMPUTER INPUT SELECTING THE COMPUTER SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA (refer to the “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 24).
24 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS This projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. NOTE : The projector may not project a proper image for D-SXGA 2 and D-SXGA 3 depending on some computers.
25 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT The Auto PC Adjustment function automatically adjusts Fine sync, Total dots, Horizontal and Vertical picture position to conform to your computer. The Auto PC Adjustment function can be operated as follows.
26 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals of most personal computers. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector.
27 COMPUTER INPUT NOTE ● Fine sync, Total dots, Display area (H/V) and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P23). Selects the area displayed with this projector. Select the resolution at the display area dialog box.
28 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SET button.
29 COMPUTER INPUT Press the POINT LEFT/RIGHT but- tons to adjust the value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon.
30 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has the picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon.
31 VIDEO INPUT SELECTING THE INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the “ MENU OPERATION ” (see below).
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING THE VIDEO SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon.
33 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SET button.
34 VIDEO INPUT Press the POINT LEFT/RIGHT but- tons to adjust the value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the IMAGE ADJUST Menu icon.
35 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has the picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon.
36 SETTING Ceiling When this function is “ On, ” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear When this function is “ On, ” the picture is left / right reversed.
37 SETTING This function turns the Projection Lamp off when this projector detects a signal interruption and is not used for a certain period in order to reduce the power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.
38 APPENDIX LAMP REPLA CEMENT LAMP REPLA CE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the Projection Lamp with a new one promptly. Follow these steps to replace the lamp assembly.
39 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
40 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and two CLICK buttons are used for wireless mouse operation.
41 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When the projector is not in use, attach the Lens Cover.
42 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the following: ● Make sure you have connected the projector to peripheral equipment as described properly in the section “ CONNECTING THE PROJECTOR ” on pages 11 ~ 13.
43 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. APPENDIX W ARNING : High v oltages are used to operate this projector .
44 INDICA T ORS AND PROJECT OR CONDITION Check the Indicators for the projector condition. • • • on • • • dim • • • off • • • flashing ✽ When the life of the Projection Lamp draws to an end, the LAMP REPLACE indicator lights yellow.
45 APPENDIX TECHNICAL SPECIFICA TIONS ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
46 APPENDIX CONFIGURA TIONS OF TERMINALS RGB INPUT 1 / OUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
47 APPENDIX Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration CONTROL PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GN.
1AA6P1P3787-- (MB3P) ©CANON INC . 2003 YT1-1339-000 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U .S.A., INC. One Canon Plaza, Lake Success , NY 11042, U .S.A. CANON CANAD A, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LA TIN AMERICA, INC.
Ein wichtiger Punkt beim Kauf des Geräts Canon LV-5200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon LV-5200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon LV-5200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon LV-5200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon LV-5200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon LV-5200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon LV-5200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon LV-5200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon LV-5200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
