Benutzeranleitung / Produktwartung HF M300 des Produzenten Canon
Zur Seite of 210
PUB. DIE-0339-000 HD Camcorder Instruction Manual Y C OP Y.
2 Introduction Important Usage Instructions WA RNING! TO REDU CE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS PRODUCT T O RAIN OR MOI STURE. WA RNING! TO RE DUCE THE RISK OF EL ECTRIC SHOCK AND TO R EDUCE ANNO YI NG INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONL Y .
3 The Mains plug is used as the disconnect devic e. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. CAUTION: • Danger of explosion if the wrong type of batte ries are attached. Use only the same type of batteries.
4 In these safety instructions the word “p roduct” refers to the Canon HD Camcorder VIXIA HF M30 A / VIXIA HF M31 A / VIXIA HF M300 A and all its ac cessories. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions.
5 21 Placing or Moving — D o not place on an unstable cart, stand, trip od, bracket or table. The product may fall, causing seri ous injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with ca re.
6 30 Damage Requiring Service — Disconnect this product from the wa ll outlet and all power sources inc luding battery , and refer servicing to qualified se rvice personnel under the following conditions: a. When the power -supply cord or plug is damaged.
7 T rademark Acknowledgements • The SD logo is a trademar k. The SDHC logo is a tra demark. • Microsoft and Windows are trademarks or r egistered trademark s of Microsoft Corpo ration in the United States and/or other coun tries. • Macintosh and Mac OS are tradem arks of Apple I nc.
8 Exciting F eatures and New Functions High-Definition Video Y our camcorder’ s fu ll high-definition image sensor (Full HD CMOS) captures video at a r esolution of 1,920 x 1,0 80 pixels 2 . Videos are then r ecorded in the memory in hi gh definition, us ing A VCHD specifications 3 .
9 Smart AUT O ( 0 43) Smart AUTO automatically selects the best scene mode for the scene you want to shoot. Y ou get spect acular recor dings every time with out worryin g about settings. Video Snapshot ( 0 68) Shoot or capture short scenes and arrange them into a video clip set to your favo rite backgroun d music.
10 Enjoying your Recordings on Other Devices Eye-Fi SD AVCHD MPEG-2 SD-Video Connect the ca mcorder to an HDTV ( 0 124) Connect the camcorder to the optional DW-100 DVD Burner ( 0 131, 135) AVCHD d iscs 4 Photo DVDs Play video direc tly from your recorded memory card AVCHD-compatible HDTVs and digital recorders with an SD memory card slot 5 .
11 C OP Y.
12 Table of contents Introduction 8 Exciting Featur es and New Functions 16 About this Manual 18 Getting to K now the Camcorder 18 Supplied Accessories and CD-ROMs 20 Names of Parts Prepar.
Table of contents 13 Dual Shot Mode 42 Basic Recording 42 Shooting Video and T aking Photos in Dual Shot Mode 43 About the Smart AUTO mode 46 Zooming 47 Quick Start Function V ideo 49 Basi.
14 Table of contents 83 Using the Mini Advanced Shoe 84 Using an External Microphone 85 Using a Zoom Remote Contr oller 87 Selecting the Playback Star ting Point 89 Playing Bac k Scenes Set to Bac.
Table of contents 15 External Connections 121 T erminals on the Camcorder 122 Connection Diagrams 124 Playback on a TV Screen 126 Saving and Sharing Y our Recordings 126 e Copying Recordings t.
16 Introduction About this Manual Thank you for purchasing the Cano n VIXIA HF M31 / VIXI A HF M30 / VIXIA HF M300. Please r ead this manual carefully befor e you use the ca mc ord er an d ret ai n i t f or fut ure ref ere nc e. Sh ou ld yo ur ca mc ord er fai l to operate corr ectly , refer to Tr o u b l e s h o o t i n g ( 0 168).
Introduc tion 17 Self Timer • n appears. • Repeat, selecting [ B Off], to turn off the self timer . mode: In record pause mode, press g . The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen. mode: Press j , first halfway to activate the autofocus and then fully .
18 Introduction Getting to Know the Camcorder Supplied Accessories and CD-ROMs The following ac cessories ar e supplied with the camcorder : X CA-570 Compact Power Adapter (incl. power co rd) BP-808 Batter y Pack W X WL-D89 Wireless Controller (incl.
Introduc tion 19 The following CD-ROMs and softwar e are supplied with the camcorder: • PIXELA Application - Disc 1 CD- ROM* and ‘PIXELA Applications’ Installation Guide - ImageMixer 3 SE T ransfer Utiliti es – Software for saving and transferring movies and music files you can use as background music.
20 Introduction Names of Parts 1 DISP . (onscreen display) button ( 0 93)/ BA TT . INFO button ( 0 167) 2 2 (camera/play) button ( 0 31) 3 Speaker ( 0 51) 4 Memory card slot cover 5 Memory card sl.
Introduc tion 21 A l Mini advanced shoe ( 0 83) S q Mode switch ( 0 31) S a PHOTO button ( 0 42, 104) S s Zoom lever ( 0 46) S d VIDEO SNAP (video snapshot) button ( 0 68) S f POWER button S g ON/.
22 Introduction Wireless Controll er WL-D89 D s Serial number D d T r ipod socket ( 0 187) 1 ST ART/STOP button ( 0 42, 58) 2 b (index selection) button ( 0 52) Press and hold for mor e than 2 seconds to switch betwee n shooting and playback mode.
Preparations 23 Preparations This chapter desc ribes basic oper ations, such as usi ng the touch panel, navigati ng the menus, and firs t time settings to help you learn more about your camcorder . Getting Started Charging the Battery P ack The camcorder can be power e d with a battery pack or directly using the compact power adapter .
24 Preparations 5 Charging will start when the camcorder is turned off. • If the camcorder was on, the green ON/OFF (CHG) indicator will go out when you turn off the camcorder . After a moment, the ON/OFF (CHG) indicator will star t flashi ng in red (battery pack charging).
Preparations 25 • T o prevent equipment breakdowns an d excessive heating, do not con- nect the supplied compact power adapter to voltage converters for overseas travels or special power so ur ces such as those on aircraft and ships, DC-AC inverters, etc.
26 Preparations Preparing the Accessories Wireless Controll er First, insert the supplied CR2025 lithium button battery into the wire- less contr oller . 1 Press the tab in the direction of the arrow and pull out the battery holder . 2 Place the lithium bu tton battery with the + side facing up.
Preparations 27 Grip Belt and Str aps Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger , and the g butt on with your thumb. To remove the gr ip belt 1 Lift the padded handgrip's flap and detach the strap fr om the V elcro pad.
28 Preparations To attach an optional wrist strap Pass the attaching end of the wrist strap through the r ear bracket on the camcorder , thread the wrist strap through the loop and fasten. Y ou can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience a nd protec tion.
Preparations 29 NOTES • About the LCD scree n: The screen is produced using extr emely high-pre- cision manufacturing tech niques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasion- ally misfire or appear as black, red, blue or gr een dots.
30 Preparations Basic Operation of the Camcorder Using the T ouch Screen The control buttons and me nu items that appear o n the touch screen change dynamicall y depending on the operatin g mode and the task you are performing. With the intuitive touch sc ree n interface you have all the contr ols at your fingertips .
Preparations 31 • For details about how to take care of the touch screen, r efer to Handling Precautions ( 0 186), Cleaning ( 0 191). Operating Modes Recording When recording video or photos, the cam corder’ s ope rating mode is determined by the position of the mode switch and the onscr een con- trol buttons.
32 Preparations NOTES • e When switching to a playback mode, the memory selected for playback will be the same currently used for recor ding. • Y ou can also press and hold B on the wireless controller for mor e than 2 seconds to switch between recording and playback mode.
Preparations 33 In and mode, touch [Edit] to display a similar panel contain- ing the various o perations that are av ailable af ter selecting o ne or mor e scenes or photo s (for example, dele ting, addin g scenes to the playlist, protecting photos, etc.
34 Preparations NOTES • A small font size is used in menu screens so you can see the options currently selected. Y ou can enla rge the font size by setting 6 8 [Font Size] to [ A Large] but only the icons of the currently selected options will appear on the screen.
Preparations 35 First Time Settings Setting the Date and Time Y ou will need to set the date and time of the camcor der befor e you can start using it. The [Date/ Time] scr een will appear automati cally when the cam- corder’ s clock is not set.
36 Preparations Changing the Language The default language of the camcorder is English. Y ou can set it to one of 22 other languages. * Only when performing the pr ocedure in a r ecor ding mode. NOTES • Some control buttons, su ch as [ZOOM], [FUNC.
Preparations 37 Using a Memor y Card Memor y Cards Compatible for Use with the Camcorder Y ou can use comm ercially available SDHC (SD high c apacity) memory cards and SD memory c a rds with this camcor der . How- ever , de pending on the memo ry card , you may not be able to r ecord movies.
38 Preparations Inserting and Removing a Memor y Card Make sure to initialize ( 0 40) all me mory car ds be fore using them with this camcorder . 1 T ur n off the camcorder . Make sure the ON/OFF (C HG) indicator is off. 2 Open the memory card slot cover .
Preparations 39 POINTS TO CHECK • Be sure you understand t he information provided in Eye-Fi Cards ( 0 37) before using an Eye-Fi card. * When selecting the memory , you ca n check the ap proximate availabl e recording time/number of photo s, based on curr ently used settin gs.
40 Preparations NOTES • Any of the following ac tions will deactivate the relay recording function: - T urning off the camcor der . - Opening the memory card slot cover . - Changing the position of the mode switch. - Changing the camcorder's operating mode.
Preparations 41 * T o uch this opt ion if you wan t to physic ally erase all the data ra ther than ju st clear the file all ocation table of the memory . ** If you selected the [ Complete Initia lization] opti on, you c an touch [Cance l] 8 [OK] to cancel the in itializat ion while it is in progress.
42 Dual Shot Mode Dual Shot Mode This chapter cove rs how to easily record video and photos in the all-automatic Dual S hot mode, and how to use basic sh oot- ing functions like zoom and Quic k Start. T o enjoy full ac cess to menus and mor e advanced func ti ons, refer to the relevant chapters for vi deo ( 0 58) and photos ( 0 104).
Dual Shot Mode 43 When you have finished recording 1 Make sure that the ACCESS in dicator is off. 2 T urn off the camcorder . 3 Close the LCD panel. About Dual Shot • Only the following function s are available in mode. - Zoom ( 0 46). -Q u i c k S t a r t ( 0 47).
44 Dual Shot Mode IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory . - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcorder .
Dual Shot Mode 45 • Be sure to save your recor dings regularly ( 0 1 26), especially after making important recor dings. Canon shall not be liable for any loss or corruption of data. • When recor d ing photos on an Eye-Fi card, photos will be uploaded automatically if you are within the ra nge of a configured network.
46 Dual Shot Mode Zooming There a re thr ee ways you ca n zoom in and out: using the zoom lever on the camcorder , using the zoom buttons on the wireless controller or using the zoom controls on the touch scr een. In addition to th e 15x optical zoom *, in mode, you can tur n on the 300x digital zoom with the 7 8 [Digital Zoom] setting.
Dual Shot Mode 47 2 T ouch the zoom controls to operate the zoom. T ouch anywher e within the Q area to zoom out or anywhere within the P area to zoom in. T ouch closer to the center for a slow zoom ([Speed 1]); touch clos er to the e / d icons for faster zooms ([Speed 3]).
48 Dual Shot Mode 2 When you wish to resume recording, open the LCD panel. The ON/OFF (CHG) indicat or turns b ack green and the camcorder is ready to recor d. IMPORT ANT • Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange).
Video 49 Video This chapter co vers functions re lated to m ovies, including pla y- back, advanced shooting, adv anced functions and playlist and scene operati ons. For details ab out basic video sho oting, refer to Dual Shot Mode ( 0 42). Basic Playback Playing Back the Video 1P r e s s S .
50 Video 4 T ouch the desired scene to play it back. • Playback will start from the scene selected and contin ue until the end of the last scene in the index screen.
Video 51 During playback pause: A Stop the playback. B Jump to the beginning of the scene. Double-tap to jump to the previous scene. C Pause the playback. D Drag your finger left and right along the volume bar to adjust the volume. E T ouch anywhere else to hi de the playback cont rols.
52 Video IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcorder .
Video 53 Options NOTES • Fast/slow playback modes are not available for scenes converted to standard definition. Scenes in the [SD Scenes] index screens can only be played back at normal spee d.
54 Video 3D Flip View 3D Flip Vi ew is a fun way to display yo ur video r ecording s (original scenes) in a 3D layout, or ganized by recording date. In any index screen, touch [ b ] 8 [3D Flip View]. During single photo view , touch the screen once to display the controls then touch [ Q ] to open the [Photos] index screen.
Video 55 Narrowing Down the Scenes Shown in the Index Screen From the [Orig inal] index scr een, you can narr ow down the scenes shown, leaving only scen es that were recor ded on a specific date or only those scenes in which peo ple's faces wer e detected.
56 Video 2 Open the calendar screen. • Dates that contain scenes (that i s, movie s were r ecorded on that date) appear in black against a silver background. Dates without recordings appear grayed out. •T o u c h [ y ] or [ A ] to jump to the previous/next calendar month that contains recordings.
Video 57 3 T ouch on the individual scenes you want to delete. • A checkmark O will appear on scenes selected. T ouch a sele cted scene again to remove the checkmark. • T o select all the scenes at once : T ouch [Select All] instead of touching individual scenes.
58 Video Advanced Functions Shooting Video in y Manual Mode When the mode switch is set to y (Manual mode), you can enjoy full access to the menus and manually adjust the exposur e, focus, white balance and many mor e of the ca mcorder's s ettings to your pr efer- ence.
Video 59 NOTES • The zoom, Quick Start function, po wer s aving modes, etc. operate the same way in mode as in mode. For deta ils, refer to Dual Shot Mode ( 0 42). Selecting the Video Quality (Recording Mode) Th e c am co rde r o ffe rs 5 re co rdi ng mo de s.
60 Video Special Scene Recording Programs Recording in a very bright ski r esort or capturing the full colors of a sunset or a fi reworks display become s as easy as se lecting a Spec ial Scene recording program. Options ( Default value) Approximate recording times Default value 1 Recorded in 1,920 x 1,080 r esolution.
Video 61 [ G Sports] T o r ecord sports scenes such as tennis or golf. [ q Night Scene] T o record nightscapes with lower noise. [ I Snow] T o re cord in bright ski resorts wit hout the subject bein g underexposed. [ J Beach] T o record on a su nny beach without the subject bein g underexposed.
62 Video NOTES •[ F Portrait] /[ G Sports]/[ I Snow]/[ J Beach]: The pict ur e may not appear smooth during playback. •[ F Portrait] : The blur effect of the background increases the mor e you zoom in ( P ). •[ I Snow]/[ J Beach]: The subject may bec ome overexposed on cloudy days or in shaded places .
Video 63 - p will appear on the screen when the camcord er's temperature becomes too high. If this happens, tur n off the camcorder , take it out of the waterproof case and keep it in a cool place until the temperature goes down. If the camcorder becomes too hot, it will tur n off automatically .
64 Video To change the fram e rate Advanced Image Stabilization The image stabil izer reduces camcor der blur (blur due to the cam- corder moving) so yo u can get nice , stable shots. S elect the image s ta- bilization mode according to the shooting conditions.
Video 65 NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be ab le to ful ly compen sate. • Power ed IS is not available in mode. • For surveying and foll owing shots, when you p an the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [ P Dynamic] or [ Q Standard].
66 Video 1 Activate the pre-recording function. • d appears. • Repeat, selecting [ B Off], to turn off pre-r eco rding. 2 Press g . The scene recorded in the memory will start 3 seconds before g was pressed. NOTES • While pre-re cording is activated, the camcorder will not emit any notifi- cation sounds.
Video 67 POINTS TO CHECK • Select a recording pr ogram other than [ q Night Scene] , [ p Low Light], [ M Fireworks] or [ r Underwater]. By default, face detection is activa ted. If the function was turned off, per- form the following pro cedure to turn it on.
68 Video T ouch & T rack Wh en rec ord in g p eo pl e, fa ce de te ct io n ( 0 66) will track the main sub- ject and keep i t always i n focus.
Video 69 1P r e s s z . • A blue border appears on the screen. • Press z again to return to normal video recording mode. 2P r e s s g . • By default, the camcorder recor d s for about 4 seconds (the blue frame serves as a visual progress bar) and then automatically returns to record pause mode.
70 Video To fade in/out Press g in recor d pause mode ( M ) to start recording with a fade in. Pr ess g while r ecording ( N ) to fade out and pause the reco rding. Options ( Default value) NOTES • When you apply a fader , not only the pictur e but also th e sound will fad e in or out.
Video 71 Options ( Default value) NOTES •[ B Shutter -Pri. AE]: - On screen only the denominator is displayed – [ B 250] indicates a shutter speed of 1/250 sec ond, etc.
72 Video Shutter Speed and Ap erture V alue Guidelines X With slower shutter speed you can add a nice motion blur and sense of movement. With faster shutter speeds you can “freeze th e action” for powerful images of moving subjects. W X With small aperture values only the subject is in focus and the background is softly blurred.
Video 73 Manual Exposure Adjustment At times, backlit subjects may appe ar too dark (underexposed) or sub- jects under very str ong lights may appear too bright or glar ing (over e x- posed).
74 Video NOTES • If the recording pr ogram is change d during exposure lock, the cam- corder will return to automatic exposur e. • When shooting subj ects with a strong light source behind them, the camcorder automatically corrects for th e backlight.
Video 75 POINTS TO CHECK • Adjust the zoom before you start the procedure. 1 Open the manual focus screen. 2 T ouch a subject that appears inside the X frame. • The T ouch AF mark ( P ) will fl ash and t he focus ing dist ance will be adjusted automatically .
76 Video White Balance The white balance f unction helps you to accurately reproduce colors under differ ent lighting conditions so that white objects will always look truly white in your recor dings. POINTS TO CHECK • Select a record ing program other th an the Special Scene r ecording pr o- grams.
Video 77 NOTES • When you select the custom white balance: -S e t 7 8 [Digit al Zoom] to [ B Off] . - Reset the white balance when you ch ange locations or the lighting or other conditio ns change. - Depending on the light source, g may keep flashing.
78 Video Options ( Default value) Mini Video Light Y ou can turn on the mini video light to shoot video or take photos in dark places. POINTS TO CHECK • Select a recor ding program other than [ r Underwater] or [ s Surface]. • Y appears on the screen.
Video 79 NOTES • We r ecommend not using the mini vi deo light while the optional Wi de- converter or T ele-converter is att ached; its shadow can appear on the screen.
80 Video mode: Press j , first halfway to activate the autofocus and then fully . The camcorder will recor d the phot o after a 10-second countdown*. The countdown appears on the screen. * 2 seconds when using the wir eless controll er . NOTES • Once the countdown has begun, any of the following act ions will cancel the self timer .
Video 81 2 T ouch and hold [ y ] or [ A ] to adjust the audio recording level as necessary . As a guideline, adjust the audio recording level so that the audio level meter will go to the right of th e -12 dB mark (yellow area) only occasionally . 3T o u c h [ a ] to lock the audio recording level at the current level.
82 Video Using Headphones Use headphones for pla yback or to check the audio level while r ecord- ing. The headphones a re connect ed to the A V OUT/ X term inal, which is used for both the headphon es and the audio/video output.
Video 83 IMPORT ANT • When using headphones, make sure to lower the volume to an appro- priate level. • Do not connect the headphones to the AV OUT/ X terminal if the J icon does not appear on the screen . The noise output in such case may be harmful to your heari ng.
84 Video NOTES • Accessories designed for the Advanced Accesso ry Shoe cannot be used w ith this camcorder . Look for video accessories bearing this logo to ensure compatibility with the mini advanced shoe .
Video 85 Using other mi crophones Y ou can also us e commercially ava il- able microphones. Connect the exter- nal microphone to the MIC terminal. Use commer cially available condenser microphones with their own power supply. Y ou can connect almost any stereo micr ophone with a ∅ 3.
86 Video Attach the optional RA- V1 Remote Control Adapter to the mini advanced shoe. Refer to Using the Mini Advanced Shoe ( 0 83). appears. For details about using the adapter , refer to the instruction manual of the RA- V1. For details ab out using the zoom remote contr oller , refer to the instruction manu al of the ZR-2000 or ZR-1000.
Video 87 Selecting the Playback Starting Point If you have a very long sc ene, you may want to start playi ng back the scene from a certain poi nt. Y ou can use the movi e timeline to break the scene to segments at fixed time in tervals ranging from 6 seconds to 6 minutes.
88 Video To change the interva l between frames T o display change s in the scene’ s ma in subject • The timeline ruler will sh ow frames taken from the scene every time the main subject detected by the camcorder changed.
Video 89 Playing Back Scenes Set to Background Music Y ou can play back video snapshot sc enes, scenes in the playlist and photo slideshows set to ba ckground musi c (instead of the orig inal sound). Y ou can use o ne of the supplied musi c tracks or connec t an external audio player to use your favorite songs as background music.
90 Video 3 Back in the index screen, touch a scene to start the playback set to the selected music track. In mode, touch a photo to go to single photo view and continue with the slideshow procedure ( 0 113). To delete a music track In the music track sel ection scre en, touch [ Z ] or [ O ] to select the track you want to delete.
Video 91 2 Activate the exter nal audio input. 3 Connect the external player to the camcorder's MIC terminal. 4 Adjust the audio input as necessary . • Start the music playback on the exte rnal player and adjust its volume according to the onscreen indications.
92 Video NOTES • Y ou can also add to th e playlist just the vide o snapshot scenes you want to watch and arrange their playback order . • Initializing a memory card will permanently erase any music files you may have transferred to the card.
Video 93 Onscreen Displays and Data Code Y ou can turn most onscreen di splays on or of f. Repeatedly press h to turn the onscreen displays on/off in the following sequence: , mode: • All displa.
94 Video Playlist and Scene Operations Editing the Playlist: Adding, Deleting, Moving and Playing Back Create a playlist to play back onl y the scenes you prefer and in the order of y our choice. Y ou can play back the scenes in the pla ylist using your favorite so ng as background music ( 0 89).
Video 95 • e Y ou can copy scenes from the built-in memory to the mem- ory card ( 0 126) to include in the memory card’ s playlist also scenes that were originally recor d ed in the b uilt-in memory . Deleting Scenes from the Playlist Deleting scenes from the playlist wi ll not af fect your original r ecor dings.
96 Video Capturing Photos and Video Snapshot Scenes fro m a Movie Y ou can captur e video snapsho t scenes, single photo s or a series of continuous photos fr om a pre viously rec orded scene .
Video 97 NOTES • A video snapshot scene can be captu red only during playback; it c an- not be captured during pl ayback pause mode. • e The captured video snapshot scene is save d to the same memory that contains the source scene. • Video snapshot scenes cannot be ca ptured from any of the following types of scenes.
98 Video To capture the photos 1 Play back the scene fr om which you want to capture the photo. 2 Pause the playback at the point you want to capture. 3 Press j fully . T o capture a photo sequence, hold j pressed down. The scene will be played back by frames an d each frame captured as a separate photo.
Video 99 2 Select the scene you want to divid e and touch it to start playing it back. 3 Pause the playback at the point where you want to divide the scene. 4 Open the scene division screen. 5 Bring the scene to a precise point, if necessary . • During playback pause: T ouch [ A ] to play back the scene.
100 Photos Photos Refer to this chapter for detail s on taking photos (advanced shooting functi ons), viewing photo s and printing them . For details about basic phot o shooting, refer to Dual Shot Mode ( 0 42). Basic Playback Viewing Photos 1 Press S .
Photos 101 4 T ouch the photo you wish to view . • The photo is displayed in single photo view. • Drag your finger left/right to br owse thr ough the photo s one by one. To return to the i ndex screen from si ngle photo view 1 T ouch the screen to disp lay the playback controls.
102 Photos IMPORT ANT • Observe the following precautions wh ile the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcorder .
Photos 103 3 T ouch on the individual ph otos you want to delete. • A checkmark O will appear on photos selected. T ouch a selected photo again to remo ve the checkmark. • T o select all the photos at once: T o uch [Select All] instead of touching individual photos.
104 Photos Additional Functions T aking Photos in y Manu al Mode 1 Set the mode switch to y . 2 T ur n on the camcorder . • e By default, photos a re recorded in the built-in memory . Y ou can select the memory that will be used to record photos ( 0 38).
Photos 105 NOTES • If the subject is not suitable for autofocus, h tur ns yellow . Adjust the focus manually ( 0 74). • When the subject is too brig ht, [Overe xp.] will flash on the scr ee n. In such case, use the option al FS-H37U ND filter .
106 Photos Options Lar ge capacity me mory car ds, like thos e usually used for vi deo reco rd- ing, can contain a very large numbe r of photos. As a r e ference, the number of photos that can be reco rded on a 1 GB memory car d is given in the foll owing table.
Photos 107 Flash Y ou can use the flash to ta ke photos in dark places. POINTS TO CHECK • Select a recording pr ogram other than [ M Fireworks], [ r Underwater] or [ s Surface]. 1 Select the flash mode. • The icon of the selected flash mode appears.
108 Photos 2 Press j , first halfwa y to activate th e autofocus and then fully to recor d the photo. Depending on the setting selected and shooting conditions, the flash will fir e.
Photos 109 • About the AF-Assist Lamp: While you pr ess j halfway , if the sur- roundings of the subject are too dark , the mini video li ght may light up briefly in order to enable the camcorder to focus more accurately (AF- assist lamp). - Y ou can also set 8 8 [AF-Assist Lamp] to [ B Off] so the assist lamp is not acti vated.
110 Photos Options ( Default value) Continuous Shooting/Hi- Sp eed Continuous Shooting 1 Press j halfway to activa te the autofocus. 2 Press j fully and hold it pressed down. Auto Exposure Bracke ting Press j , first halfway to ac tivate the autofocus and then fully to rec ord th e 3 ph ot os .
Photos 111 * The number displaye d on the right corner indi cates the app roxi mate number of photos that can be recor ded with the curren t quality/si ze setting. ** T ouch [ X ] if you do not intend to use simult aneous r ecor ding. While recor ding, or in record pause mode, pr ess j to capture the photo.
112 Photos Light Metering Mode The camcor der measur es the light r eflected fr om the subject in order to calculate the optim al exposur e setting s.
Photos 113 Slideshow set to a music track 3 T ouch the screen to display the playback controls, then touch [ A ] to play back the slideshow set to the selected music track. Slideshow not li nked to the external audio 3 T ouch the screen to display the playback controls, then touch [ A ] to start the slideshow .
114 Photos 2 Drag your finger across the photo to display the area you want to see enlarged. T o cancel the magnification, move the zoom lever tow ard Q unti l the frame disappears. Rotating Photos Y ou can rotate photos 90 degr ee s to change their orientat ion.
Photos 115 The histogram and Exif information panel are displayed as well. Press h to hide the histogram an d Exif information panel. The area to the right of the histogra m r epr esents highlights and the left side re presents s hadows.
116 Photos * T ouch [Re move Prote ction] to r emove the protecti on fro m the selected photos. IMPORT ANT • Initializing the memory will permanently e rase all recor dings, including protected photos. - r Functions Y ou Can Use when Taki ng Photos [Edit] 8 [Protect] 8 [Pr otect]* 8 [OK] Y ou can also use the following functions.
Photos 117 Printing Photos Printing Photos (Direct Print) The camco rder can be connected to any P ictBridge-compati ble printer . Y ou can mark in advance th e photos you want to print and set the desired number of copies as a print order ( 0 119).
118 Photos • Refer also to the prin ter’ s instruction manual. • If you have no intention to use the optional DW-100 DVD Burner , you can set 8 8 [USB Connection T ype] to [ N Computer/Printer] so the device type selection screen does not appear every time you c on- nect the camcorder to a printer .
Photos 119 Print errors If an error occurs while printing, an e rror m essage (for example, [ No paper]) will appear on the camcor de r’ s screen. Solve the problem refer- ring to the err or message list ( 0 183) and to the printer's instruction manual.
120 Photos • T o cancel the print order , set the num ber of copies to 0. 4 Drag your finger left/right to se lect another photo to mark with a print or der or touch [ a ]. Setting Print Orders fr om the Index Screen 1 Open the [Photos] index screen.
External Connections 121 External Connections This chapter explai ns how to connect your camc order to an external device such as a TV , VCR, or computer . T erminals on the Camcorder * When connecting a cable to t he camcorder , make sure to al ign the trian gle marks on the cable's connector and o n the camcorder's termin al.
122 External Connections Connection Diagrams In the following connecti on diagrams, the left side shows the terminals on the camcorder and the right s ide shows (for reference only) an example of termin als on a connected devi ce.
External Connections 123 Connection B Component Video T ype: Analog Quality: High Defini tion Output only Connect to a high-definition TV (HDTV) with component vide o input terminals.
124 External Connections NOTES • T o be able to write back scenes an d to transfer musi c fi les from the computer to the camcorder , power the camcorder using the compact power adapter and only th en connect it to the computer using the sup- plied USB cabl e.
External Connections 125 NOTES • T o correctly play back movies recor de d with x.v .Co lor ( 0 156) on an HDTV compatible with this standa rd, additional se ttings may be requir ed on the connected HDTV . Refe r to the TV’ s instruction manual.
126 External Connections Saving and Sharing Y our Recordings e Copying Recordings to a Memory Card Y ou can copy your r ecordings only one-way: fr om the built-in memory to the memo ry card. Scenes and photos will be copied from the index screen you selected to the corresponding inde x screen on the memory card .
External Connections 127 Copying a Single Photo 1 In single photo view , select the photo you want to copy . Check that you are viewing photos r ecorded in the bu ilt-in me mory . ( f appears next to the photo number .) 2 T ouch the screen to disp lay the playback controls.
128 External Connections IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcorder .
External Connections 129 Using the soft ware See ‘ImageMixe r 3 SE Softwa re Guide’ (PDF file on the T ransfer U tili- ties CD-ROM). Saving Photos With the supplied software Photo Applications you can save photos to your computer , and easily or ganize and edit them.
130 External Connections IMPORT ANT • When the camcorder is co nnected to a computer: - Do not open the memory card slot cover and do not remove the memory card. - Do not access, change or delete any of the camcorder’ s folders or files directly from the computer as this may re sult in perm anent data loss.
External Connections 131 • If you connect the camcorder to the computer while it is set to mode, the process of creating scene th umbnai ls will start automatical ly .
132 External Connections 3 For original recordings only: Choos e whether to add to the disc all the scenes or only scenes that have not been previously added to a disc. When you create the disc from the [Playl ist] index screen (includ ing the playlist of video snapshot scenes), the disc will contain the entire playlist.
External Connections 133 • When the last disc is finalized, [T ask completed] will be displayed. T ake out the disc and close the disc tray . When the data requir es multiple discs After a disc is final ized, it will be ejected autom atically and a messag e will appear .
134 External Connections Playing Back AVCHD Discs Using the DW- 100 DVD Burner Y ou can use the optional DW-100 DV D Burner and the camcorder also to play back high-definit ion (A VCHD) discs on a TV . This is very conve- nient, for example to play back your discs eve n in a location wher e an A V CHD-compatible DVD play er is not available.
External Connections 135 6 Select the scene you want to play back and touch it to start playing it back. IMPORT ANT • While the camcorder is connected to the DVD Burner , do not open the memory card slot cover and do not remove the memory card.
136 External Connections Converting Scenes into Standard Definiti on 1 Power the camcorder using the compact power adapter . 2 Make sure there is a memory card in the camcorder with sufficient available space. 3 Open the [Origi nal], [Playlist] or [Vid eo Snapshot] → [Original]/ [Playlist] index screen.
External Connections 137 T o select the bit rate Using a higher bi t rate will result in better video quality for the con- verted scen es. NOTES • When converting scen es in the [Playlist] or [V.
138 External Connections 4 Click [Disc writing] and continue the operation on the comp uter following the software's indications. See also ‘ImageMixer 3 SE Software Guide’ (PDF file on the T ransfer Utilities CD-ROM).
External Connections 139 To play back s tandard-defini tion DVDs Standard-definition DVDs are created using DVD-Video specifications. Play back these DVDs us ing standar d DVD players.
140 External Connections To play back Photo D VDs Photo DVDs are created using DV D-Video specifications . Play back these DVDs using standar d DVD players. If you computer has a DVD drive, you can play back the s lideshow as a DVD and you ca n also access individual photos as JPG fi les.
External Connections 141 2 T ur n on the camcorder and set it to mode. Ve r i f y t h a t 6 8 [A V/Headphones] is set to [ H AV ] . 3 Camcorder: Locate the scene you wish to copy and pause the playback shortly just before the desired scene. 4 Camcorder: Resume playback.
142 External Connections Converting Scenes into Standard Definiti on 1 Power the camcorder using the compact power adapter . 2 Make sure there is a memory card in the camcorder with sufficient available space. 3 Open the [Origi nal], [Playlist] or [Vid eo Snapshot] → [Original]/ [Playlist] index screen.
External Connections 143 7 When the conversion is completed, a confirmation sc reen will appear . Connect the camcorder to the computer at this point ( 0 144) to continue uploading the converted videos to the Web or touch [End Without Connecting] to connect to the computer later .
144 External Connections • When converting scenes in the [Playlist]: - All the scenes are merged into one converted scene. - If the converted scene is too large, it will be sp lit into small er 10- minute long scenes.
External Connections 145 IMPORT ANT • While the camcorder is connected to the computer , do not open the memory card slot cover and do not remove the memory car d. • Observe the following precautions while the ACCESS indicator is on or flashing.
146 External Connections IMPORT ANT Using an Eye-Fi Car d • This prod uct is not guaranteed to support Eye- Fi card funct ions (includ- ing wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer . Also note that an appr oval is requir ed to use Eye-Fi cards in many countr ies or regions.
Additional Information 147 Additional Information This chapter contains tr oubleshooting advice, scr een mes- sages, handling and maintenanc e tips, and othe r information. Appendix: Menu Options Lists Menu items not available appe ar grayed out. For deta ils about how to select an it em, refer to Using the Menus ( 0 32).
148 Additional Information [ S Flash] [ U Automatic] , [ V Red-Eye Auto], [ S Flash On], [ W Flash Off] – z 107 [ X Focus] [ 2 ] (manual focus ): T oggle on ( x ) or off ( w ), T ouch AF frame z.
Additional Information 149 Setup M enus [Edit] Panel - Mode 1 : Original scen es s : Playlist scenes (inc luding the playlist only of video snapshot scenes) Z : Original video snapshot scenes u : .
150 Additional Information [Edit] Panel - Mode Control Button Index Screen Single Photo View 0 e [Copy ( P U g )] [Selected Photos], [All Photos] z 127 [Delete] z 102 [Protect] z 115 [Print Orders.
Additional Information 151 Setup Menus 7 / 8 Camera Setu p * Option availabl e only when the option al SM-V1 Surround Microphone is atta ched to the camcor der after having upda ted the camcor der’ s firmware using the mem- ory card supplied with t he SM-V1.
152 Additional Information [Digital Zoom]: Determines the operation of the digital zoom. The color of the indicator indi- cates the zoom. • When activated, the cam- cord er will s witch a utomati cally to digital zoom when you zoom in beyond the optical zoom range.
Additional Information 153 • Using focus assistance will not affect the r ecordi ngs. It will be cancelled automatically after 4 seconds or when you start recording. [Auto Slow Shutter]: The camcor der automatically uses slow shutter speeds to obtain brighter recordings in places with insu fficient lighting.
154 Additional Information [Onscr een Mark ers]: Y ou can di splay a grid or a horizontal line at the cen- ter of the screen. Use the markers as a reference to make sure your sub- ject is framed correctly (ver tically and/or horizontally). • Using the onscreen markers w ill not affect the recor dings.
Additional Information 155 [Frame Rate]: Selects the frame rate to be used when recor ding. [ o PF30]: 30 frames per second, progressive. Use this frame rate to easily edit your recordings, for ex ample, to post them on the Web. [ E PF24]: 24 frames per second, progr essive .
156 Additional Information [Memory Info]: Displays a screen where you can verify how much of the built-in memory ( e only) or the memory card is curr e ntly in use ( l total record ing time and k total number of photos) and how much space remains available for r ecording.
Additional Information 157 • The photo number in dicates the n ame and location of the f ile on the memory card. For example, the file name of a photo numbered 101- 0107 is “IMG_ 0107 .
158 Additional Information • When the TV type is set to [ F Normal TV], during the playback of video originally r ecorded with an asp ect ratio of 16:9, the picture will not be displayed fullscreen.
Additional Information 159 1 Option not avai lable when the camcor der is connec ted to an HDTV usi ng an HDMI cable. 2 Option availab le only when usi ng an Eye-Fi card.
160 Additional Information [Font Size]: Changes the size of the font for the menu and other screens. • When the font size is set to [ A Large], some informatio n may be dis- played in shortened form (icons only , etc.). Some screens will be dis- played using the small font si ze regardless of the setting.
Additional Information 161 • Y ou can se t Quick Start to [ B Off], for example, if the camcorder is set on a fixed position and you want to keep recording video with the LCD panel closed in order to conserve the battery's powe r . [Calendar Start Day] : Select the day on which the week in the calendar scr een ( 0 55).
162 Additional Information [Demo Mode]: The d emonstration mode displays the camcorder's main features. It starts automatically when the camcorder is power ed with the compact power adapter if you leave it tur ned on without a memory card for more than 5 minutes.
Additional Information 163 Appendix: Onscreen Icons and Displays Recording Movies (in Dual Shot mode) 1 Smart AUTO mode ( 0 43) 2 Onscre en zoom contr ols ( 0 46) 3 Operating mode ( 0 31 ) 4 In re.
164 Additional Information Recording Movies (in y Manual mode) A s Control button: Open the FUNC. panel ( 0 32) A d Recording pr ogram ( 0 60, 63, 70) A f R Instant AF ( 0 152), MF Manual focus ( .
Additional Information 165 Recording Photos (in y Manual mode) D k Drive mode ( 0 109) D l Light metering mode ( 0 112) F q Control button: Last function used ([MENU] in this case) F a Self timer .
166 Additional Information Viewing Photos Exif information panel G g Control button: Ope n the setup menus ( 0 151) G h Protected photo mark ( 0 115) G j Current phot o / T otal number of photos G.
Additional Information 167 5 Memory operation N Record, M Record pause, A Playback, C Playback pause, I Fast playback , J Fast reverse playback, G Slow pl ayback , H Slow reverse playback, E Frame advance, F Frame reverse.
168 Additional Information Tro ub l e? T roubleshooting If you ha ve a p rob lem wi th yo ur cam c orde r , re fe r to th is se cti on . S om e- times what you think is a malf unction of the camc .
Additional Information 169 - The camcorder cannot communicate with the battery pack attached. Such battery packs can- not be charged using this camcorder . A noise can be heard from the compact power adapter . - A faint sound can be heard while the compact power adapter is connected to a power outlet.
170 Additional Information After using the camcorder for a long time , it becomes hot. - The camcorder may become hot after using it cont inuously for long periods of time; this is not a malfunction. If the camcorder becomes unusuall y hot or it becomes hot after usi ng it only for a short while, it may indica te a problem with the camcorder .
Additional Information 171 When playing scenes/a slideshow link ed to external audio, the video playbac k is not correctly linked to the external player . - The volume of external player may be too low . T ry increasing the volume of the external player .
172 Additional Information The red ON/OFF (CHG) indicator flashes very slowly ( one flash at 2- second intervals). - The temperature of the battery pack is outside the charging range.
Additional Information 173 Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as firewo rks, shows or concerts), soun d may become distorted or it may not be recorded at the ac tual levels. Activate the microphone attenuator ( 0 153) or adjust the audio recording level man ually ( 0 80).
174 Additional Information Connections with Exter nal Devices Video noise appears on the TV screen. - When using the camcorder in a room w here a TV is located, keep a dis tance between the compact power adapter and the power or antenna cables of the TV .
Additional Information 175 After connecting the camcorder to a printer , th e message [Busy] continues to appear on the screen - Disconnect the USB cable and restore the conne ction after a short whi le.
176 Additional Information e Built-in memory is full - The built-in memory is full (“ f End ” appears on the screen). Delete some recordings ( 0 56, 102) to free some space. Save your recordings ( 0 128) and initialize the built-in memory ( 0 40).
Additional Information 177 e Cannot play back Cannot access the built-in memory - There is a problem with the built-in memory. Save your recor dings ( 0 128) and initialize the built-in memory using the [Complete Initialization] option ( 0 40). If the problem persists, contact a Canon Service Center .
178 Additional Information Change the battery pack - Batter y pack is exhausted. Replace or charge the battery pack. Check the memory card - Cannot access the memory card. Check the memory card and make sure i t is inserted cor- rectly. - A memory card error occurred.
Additional Information 179 Error writing on the memory card. Data may be recovered if the memory card has not been removed. Attempt recovering the data? - This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writ ing on the memory card.
180 Additional Information Need to recover files from the memory card. Change the position of the LOCK switc h on the memory card. - This message will appear the next time you turn on the camcorde.
Additional Information 181 Some B photos could not be deleted - Protected photos ( B ) cannot be deleted. Remove the prote ction ( 0 115). Some scenes could not be added to the playlist. - Y ou may not be able to add to the pl aylist scenes recorded using another device .
182 Additional Information T o record video on this memory card, it is recommended to use only the XP+/SP/LP recording modes - Movies may not be recorded correctly on this me mory card if the recording mode is set to MXP or FXP mode ( 0 59).
Additional Information 183 Connect the compact power adapter - The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcord er . Disc access failure . Check the disc. - There was an error when reading the disc or attempting to write onto it.
184 Additional Information File error - Y ou attempted t o print a photo that was reco rded with another camcorder , has a different compression, or was edited o n a computer . Hardware er ror - Cancel printing. T urn off the printer and turn i t back on.
Additional Information 185 Printer in use - The printer is in use. Check the printer status. Printing error - The printer does not support the paper size sele cted for [Paper Settings]. Set [Paper Settings] to [Default] or a paper size supported by the printer used.
186 Additional Information Do’s and Don’ts Handling Precautions Camcorder Be sure to ob serve the following precautions to ensure maximum per- formance.
Additional Information 18 7 • When mounting the camcorder on a tripod, make sure th at the tripod's fas- tening screw is shorter than 5.5 mm (0.2 in.). Using other tripods may dam- age the camcorder . • When recording movies, try to get a calm, stable picture.
188 Additional Information Remaining batter y time If the remain ing battery time displaye d is not corr ect, charge the battery pack fully . Still, the co rrect time may not be displayed if a fully charged battery pack is used continuously in hi gh temperatures or it is left unuse d for long periods of time.
Additional Information 18 9 • Secure Digital (SD) memory cards have a physical switch to prevent writ- ing on the card so as to avoid the accidental erasure of the card's con- tent. T o write-protect the memory card set the switch to the LOCK position.
190 Additional Information • Wipe the battery with a clean dry cloth to ensure proper contact. • For California, USA only: The lithium battery i nclud ed contains Perchlorate Material – special handling may apply . See www .dtsc.ca.gov/hazardouswaste/perchlorate for details.
Additional Information 19 1 Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body . Never use chemically treated cloths or volatile so lvents such as paint thinner . Lens and Instant AF Sensor • If the lens surface or Instant AF sens or is dirty , autofocus may not work properly .
192 Additional Information • Remove the memory card and battery pack. The n, place the camcorder in an airtight plastic bag and let it a djust gradually to temperature changes before removing it fr om the bag. When condensation is detec ted The camcorder automatically shuts off.
Additional Information 19 3 General Information Accessories * Supplied w ith the camco rder; not availa ble as an op tional accesso ry . (Ava ilability differs from area to area) Optional accessori es not listed belo w ar e described in more detail in the followin g pages.
194 Additional Information NOTES • Accessories that are compatible wi th the Advanced Accessory Shoe cannot be attached to this camcorder . Look for the Min i ADV ANCED SHOE logo to ensure compatibility with the mini advanced shoe. Optional Accessories Call or visit your local r etailer/ dealer for genui ne Canon video acce sso- ries.
Additional Information 19 5 5 CG-800 Battery Charger Use the battery charger to charge the battery packs. It plugs directly into a power outlet without a cable. Charging Time s The charging times given in the follo wing table are approximate and vary according to charging conditions and initial charge of the battery pack.
196 Additional Information Using a memory card * Approximate times for reco rdi ng with rep eated operat ions such as sta rt/stop, zooming, and po wer on/of f. 8 TL-H37 Tele-conve rter This T ele-converter lens increases the focal length of the camcorder lens by a factor of 1.
Additional Information 19 7 A q FS-H37U Filter Set Neutral density and MC p rotect or filters help you to contr ol dif ficult lighting cond i- tions. A a SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories.
198 Additional Information A g VFL-2 Video Flash Light This video flash light allows you to record photos and movies even at night or in dark places.
Additional Information 19 9 Product Codes Provid ed Access ories CA-570 Compact Power Adapter 8468A002AA BP-808 Battery Pack 2740B002AA WL-D89 Wireless Contr oller D83-0790-000 STV-250N Stereo Vid.
200 Additional Information Specifications VIXIA HF M31 / VIXIA HF M30 / VIXIA HF M300 / System • Recording System Movies: AVCHD Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch; Dolby Digital 5.1ch* * Onl y when using the o ptional SM-V1 Surroun d Microphone.
Additional Information 20 1 • Lens f=4.1-61.5 mm, F/1.8-3.2, 15x optical zoom 35 mm equivalent: Movies: [Dynamic] IS mode: 39.5 – 711 mm Other IS modes: 39.
202 Additional Information Power/Others • Power supply (rated) 7.4 V DC (battery pack), 8.4 V DC (compact po wer adapter) • Power consumption: 3.5 W (SP mode, AF on, LCD normal brightness) • Operating temperature: 0 – 40 °C (32 – 104 °F) • Dimensions [W x H x D] (excluding the grip belt): 68 x 60 x 123 mm (2.
Additional Information 20 3 Weight and dimensions are approximate. Errors and omissions excepted. The informati on in this manual is verified as of January 2 010. Subje ct to chan ge with- out notice. About the music files The specifi cations of the musi c files compati ble with the camcorder are as f ollows.
204 Additional Information Index 24p Cinema Mo de . . . . . . . . . . . . . 63 3D Flip View . . . . . . . . . . . . . . . . . 54 A Abroad, using the camcorder . . . . 192 AF-assist lamp . . . . . . . . . . . . . . 109 AGC (automatic gain) limit . .
Additional Information 20 5 Histogram . . . . . . . . . . . . . . . . . . 1 14 I Image ef fects . . . . . . . . . . . . . . . . 77 Image stabili zer . . . . . . . . . . . . . . . 64 Index screens . . . . . . . . . . . . . . . . 49 Index screen selection .
206 Additional Information Serial number . . . . . . . . . . . . . . . . 22 Setup menus . . . . . . . . . . . . . 33, 151 Shutter speed . . . . . . . . . . . . . . . . 70 Simultaneou s recor ding . . . . . . . . 1 10 Slideshow . . . . . . . . . . .
207 CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED ST A TES The limited warranty set forth b elow is given by Canon U.S.A., Inc. (“Canon US A ”) with respect to Canon Consumer Digital Video E quipment (the “Equipme nt”) purchased in the United States.
208 LOSS OR CORRUPTION OF DA TA, INCL UDING WITHOUT LIMITA TION, LOSS OR CORR UPTION OF DA TA STORED O N THE EQUIPMENT’S HARD DRI VE, OR ANY OTHER SPECIAL, INCIDENTA L OR CONSEQUENTIAL DAMAGES CAUSE.
209 CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED WAR RA NT Y The limited warra nty set forth belo w is given by Can on Canada Inc. (“Cano n Canada”) with respect to Canon C onsumer Digital Video Equipment (the “Equipmen t”) purchased in Canada.
USA CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway , Irvine, CA 92618 USA CANON U.S.A., INC.
Ein wichtiger Punkt beim Kauf des Geräts Canon HF M300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon HF M300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon HF M300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon HF M300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon HF M300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon HF M300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon HF M300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon HF M300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon HF M300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
