Benutzeranleitung / Produktwartung F1 des Produzenten Canon
Zur Seite of 30
Paper Folding Unit-F1 Operating information Océ User Manual.
Copyright Copyright 2011 by Canon Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of Canon Inc.
Contents Chapter 1 Preface ................................................................................................................. 5 Notes for the reader................................................................................... 6 Naming conventions for finishers (commercial naming and naming in User Interfaces).
4 Contents.
Chapter 1 Preface.
Notes for the reader Introduction This manual helps you to use the Paper Folding Unit-F1. The manual contains a descrip- tion of the product and guidelines to use and operate the Paper Folding Unit-F1. Definition Attention-Getters Parts of this manual require your special attention.
Indicates Icon Word Ignoring this warning could cause injury or damage to property. Caution Indicates additional important information. Note The use of heat-resistant gloves is mandatory when you carry out these actions.
Naming conventions for finishers (commercial naming and naming in User Interfaces) Hardware and hardware naming in User Interfaces To improve the readability of texts in User Interfaces of operator panels and software, the finishers are generally referred to by their function.
Chapter 2 Use the folder.
The main parts of the folder Note: The folder (Paper Folding Unit-F1) can only be used in combination with the stack- er/stapler (Finisher-AF1/Saddle Finisher-AF2). Illustration [10] Main parts of the folder Components and their functions Main parts of the folder # Function Component Open this door to remove jammed paper.
The folding modes Overview of the folding modes The folder supports the following folding modes. Folding modes # Remarks Illustration Folding mode Only Z-folded A4R, LetterR and Legal sheets can be sent to the folder output tray. Z-folded A3, B4 and 11" x 17" sheets must be sent to the output trays of the stacker/stapler.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the Z-folded areas # Remarks Feeding method If paper that has been Z-folded is includ- ed in the output, the sheets may not be aligned when output.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the tri-fold in areas # Remarks Feeding method Platen glass = Glass plate Feeder = ADF Tri-fold out The illustration below shows the feeding direction and fold method.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the tri-fold out areas # Remarks Feeding method Platen glass = Glass plate Feeder = ADF Double parallel fold The illustration below shows the feeding direction and fold method.
Legend for the above illustration # Translation English text Leading Edge Length Leading Edge Length Feeding Direction Feeding Direction Overview of the double parallel fold areas # Remarks Feeding me.
Chapter 2 - Use the folder 16 The folding modes.
Chapter 3 Troubleshooting.
Labels inside the folder Introduction If a paper jam occurs in the folder (Paper Folding Unit-F1), the operator panel will display the location of the paper jam and a procedure to clear the paper jam. Follow the procedure on the operator panel to clear the paper jam.
[24] Front Cover = Front cover Overview of the error locations and their labels The table below describes the error locations in the order these must be checked in gen- eral. Depending on the paper jam, the order to check the error locations can be different.
Clear a paper jam in the folder Introduction If a paper jam occurs in the folder, the operator panel will display the location of the paper jam and a procedure to clear the paper jam. Follow the procedure on the operator panel to clear the paper jam. The procedure below describes how to clear a paper jam in the folder.
Illustration Action Step Turn the dial (M-A3) in the di- rection of the arrow (counter- clockwise). 3 Remove any jammed paper. 4 Pull out the paper folding unit (M-B1).
Illustration Action Step When there is a paper jam in the inside guide When there is a paper jam in the outside guide Remove any jammed paper. 7 Close the left-hand guide (M- B2). WARNING When you close the guide, be careful not to get your fingers caught, as this may result in per- sonal injury.
Illustration Action Step When there is a paper jam in the inside guide When there is a paper jam in the outside guide Remove any jammed paper. 10 Close the right-hand guide (M- B3). WARNING When you close the guide, be careful not to get your fingers caught, as this may result in per- sonal injury.
Illustration Action Step Remove the jammed paper. 13 Return the paper folding unit (M-B1) to its original position. WARNING When you return the paper folding unit to its original posi- tion, be careful not to get your fingers caught, because this may result in personal injury.
Illustration Action Step Follow the instructions on the operator panel. 18 Chapter 3 - Troubleshooting 25 Clear a paper jam in the folder.
Chapter 3 - Troubleshooting 26 Clear a paper jam in the folder.
Appendix A Specifications.
Specifications Paper Folding Unit-F1 Note: Whenever a number of sheets is mentioned in the table below, the figure is based on media of 80 g/m² (20 lb Bond). Specifications of Paper Folding Unit-F1 # Specification Item Integrated folding unit that comes optional in combination with Finisher-AF1 or Saddle Finisher- AF2.
Specification Item From Finisher-AF1/Saddle Finisher-AF2 Power source Appendix A - Specifications 29 Specifications.
Index Conversion table for commercial names and user interface names Conversion table for commercial names and user interface names ................................................. 8 E Error locations Error locations .................................
Ein wichtiger Punkt beim Kauf des Geräts Canon F1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon F1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon F1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon F1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon F1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon F1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon F1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon F1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon F1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
