Benutzeranleitung / Produktwartung AW820 des Produzenten Advent
Zur Seite of 24
ire/ess 900 MHZ WIRELESS STEREO SPEAKERS INSTALLATION AND OPERATING INSTRUCTIONS AW820.
900 MHz Wireless Stereo Speakers Installation and Operation Manual Model AW820 CONTENTS C.Rnect the Transmitter 5 Pewer the Speakers 7 Adiust the Transmitter 7 T.e the Speakers 8 Troubleshooting 9 S,ecifications & Features ~ 11 INTRODUCTION Thank you for your purchase of 900 MHz Wireless Speakers by Advent.
O+--+---G K L M NJ I Front BCD E F .0 o. H Bottom~ A. Tuning Indicator Light B. Tuning Control Wheel' C. Left/Monaural/Right Switch D. Power ON-OFFNolume Control Wheel E. Battery Compartment Cover F. Speaker Power Input Jack G. Mounting Bracket Bolt Hole- see (T) H.
CONNECT THE TRANSMITTER Connect the transmitter as follows: _1 Power the Transmitter 1. Insert the power cord from AC Adapter (0) into the Transmitter Power Input Jack (I). 2. Plug the AC adapter into a nearby, standard wall outlet. Note: Be sure to use the AC adapter rated 18V DC 150 rnA.
3. Plug the 3.5mm mini plug from the "V" Cable Adapter into the headphone jack (as needed, use the Headphone Adapter Plug (Q) to convert the 3.5mm plug to a 1/4" plug). Note: If you select Option 1 or Option 2 to connect the transmitter, the audio level will be fixed or variable, depending on your equipment.
Hint: On most bookshelf-type or compact stereo systems, inserting a headphone plug into the headphone jack results in automatic cutoff of the regular, or hard-wired, speakers. Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which, if any of your outputs is fixed, refer to the TV instruction manual.
Audio Level ~ ~ ~ Output Level Frequency Control Control Wheel (K) Wheel (N) STEP 2 SET THE TRANSMITTER "LEVEL" 1. Set the Frequency Control Wheel (N) to its midpoint. 2. Turn the Output Level Control wheel (K) all the way to the right as shown.
SmlNG THE SPEAKERS FOR STEREO/MoNAURAL OPERATION For stereo operation, set the Left/Mono/Right Switch (C) to "Left" on one speaker and "Right" on the other speaker.
If you are using a Tape 2 Monitor output from your receiver/amp as the audio output, check that you have pressed the Tape MonitorlTape 2 button on the front of the receiver. This will turn on the Tape 2 outputs, which may be inactive otherwise. No Sound Check the left/right balance control on the audio source.
speCIFICATIONS & FEATURES TRANSMITIER Omnidirectional Effective Transmitting Range: Up to 300 Feet* Adjustable Audio Level Input Variable Frequency Adjustment between 912.
WARRANTY ONE YEAR LIMITED WARRANTY Recoton Corporation (the Companyl warrants to the original retail purchaser of this product that should the product or any part thereof be proven defective in material or workmanship within One Year from the date of original purchase, such defects will be replaced without charge for parts or labor.
READ THE FOLLOWING BEFORE BEGINNING INSTALLATION Thank you for purchasing an Advent Wireless product. With this purchase, you are about to experience the freedom of listening to crisp, clear, dynamic sound without wires.
900 MHZ WIRELESS STEREO SPEAKERS A W820 W ir eless INST ALLA TION AND OPERA TING INSTRUCTIONS.
Wireless Stereo Speakers Installation and Operation Manual Model A W820 CONTENTS Connect the T ransmitter .............................................................................................. 4 Power the Speakers .............................
3 R O CHARGE LEVEL FREQ. ADJUST DC 12V I K M J L N H OFF POWER/VOLUME TUNING LR MONO B C D E F A Front Back Bottom G S P Q A. T uning Indicator Light B. T uning Control Wheel C. Left/Monaural/Right Switch D. Power ON-OFF/V olume Control Wheel E. Battery Compartment Cover F .
4 CONNECT THE TRANSMITTER Connect the transmitter as follows: Step 1 Power the T ransmitter 1. Insert the power cord from T ransmitter AC Adapter (O) into the T ransmitter Power Input Jack (J). 2. Plug the T ransmitter AC Adapter (O) into any standard wall outlet.
5 W ARNING: DO NOT connect the RCA plugs of the “ Y ” Cable Adapter to a speaker output on the audio source. If you use the speaker output of an audio source to connect the transmitter , you will permanently damage the transmitter . It is designed to work with RCA-type line/variable outputs or headphone outputs only .
6 ADJUST THE TRANSMITTER Adjust the transmitter as follows. Step 1 T ur n ON your Audio Sour ce (i.e. Stereo Receiver , TV , etc.) so that you can hear sound coming from the source. Step 2 Pivot the Antenna (N) to the upright, vertical position. Step 3 Set the T ransmitter “ Level ” 1.
7 T urn On and T une the Speakers 1. Use the speaker Power ON-OFF/V olume Control Wheel (D) to turn the speaker “ ON. ” T uning Indicator Light (A) will illuminate red. 2. T urn the T uning Control Wheel (B) until the T uning Indicator Light changes color to green, indicating the speaker is tuned to the signal from the transmitter .
8 Hint: Fixed-level audio outputs from stereo receivers/amps will typically be desig- nated as T ape, T ape 1, and T ape 2 outputs, DA T (digital audio tape) outputs, VCR audio output connections, and auxiliary audio outputs.
9 Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which, if any of your outputs is fixed, refer to the TV instruction manual. Some TVs have outputs that can switch between variable and fixed. Refer to the TV instruc- tion manual.
10 T rouble Checks and Adjustments No Sound/ • If using battery power , batteries may be low . Replace if necessary . Distortion/ Static • Check that the speaker T uning Indicator Light is illuminated green. If not, adjust the T uning Control Wheel until the light changes from red to green.
11 SPECIFICA TIONS & FEA TURES T ransmitter Omnidirectional Effective T ransmitting Range: Up to 300 feet* Adjustable Audio Level Input V ariable Frequency Adjustment between 912.
AD25981 15821-0-2 2/99 A Division of Recoton® Corp. 2950 Lake Emma Road Lake Mary , FL 32746 © 1999 Recoton Corp. MADE IN CHINA W ARRANTY ONE YEAR LIMITED W ARRANTY Recoton Corporation (the Company).
Ein wichtiger Punkt beim Kauf des Geräts Advent Advent AW820 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Advent Advent AW820 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Advent Advent AW820 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Advent Advent AW820 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Advent Advent AW820 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Advent Advent AW820 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Advent Advent AW820 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Advent Advent AW820. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Advent Advent AW820 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
