Benutzeranleitung / Produktwartung AWN-11N-USB des Produzenten Advantek Networks
Zur Seite of 26
High Power Wireless – N USB Adapter Manual Model # A WN-1 1N-USB.
T able of Content s 1 USING THIS DOCUM ENT........................................................................ 3 2 INTROD UCTION ...................................................................................... 3 3 SYSTEM REQU IREMEN TS .....
1 USING THIS DOCUMENT This document provides detailed user guidelines for Wireless LAN USB Adapter operation and setting-up. Though every effort has been made to ensure that this document is up-todate and accurate, more information may have become available subsequent to the production of this guide.
4 Driver Installation and Uninstallation W arning! Do not cover or block the airflow to the adapter . The adapter will reach a high temperature during use. 4.1 Driver Inst allation Before you proceed with the inst allation, please notice the following descriptions.
S tep 3: Click Next S tep 4: Click Install.
The system start s software inst allation of the WLAN USB adapter . S tep 5: Click Finish to complete the installation..
After click Finish to com plete the installation , under Windows7 <ALL Programs> menu , REAL TEK 1 1n USB wireless LAN Utility program installed. Realtek Utility shortcut on the desktop. Insert the wireless LAN USB adapter into your computer USB port , the computer detected and active the wireless LAN USB adapter automatically.
4.2 Driver Uninst allation S tep 1: Uninstall the WLAN USB Adapter Driver fr om "S tart">"All Programs" >"REAL TEK 1 1 n USB Wireless LAN Utility">Click "Uninst all" to remove Wireless LAN USB Adapter driver .
Open Control Panel and click Programs. Click Uninstall a progra m.
Select REAL TEK Wireless LAN Driver and Utility Click Uninstall S tep2: Click Y es..
S tep 3: Click Finish to complete the uninstallation.And rest art computer ..
5 Wireless LAN Manaement GUI Introduction of Main Window A. Main Menu 1. Refresh(R) When clicking the refresh menu, you can update and re-enumerate the contents of adapter list area. 2. Mode(M) Wireless configuration is quickly switched to be either [S tation] or [Access Point].
3. About (A) Click the "About" to show the about dialog. The application version and license information are shown in the about dialog. B. Adapter List Area All connected adapters on this system with multiple adapter inst allations are displayed in this area.
C. Properties Area The contents of this are a are dependent on current wireless configuration. The current configuration is determined on previous explanation of submenu "Mode". The more detailed content s are described in the following wireless configuratio n sections for both S tation and AP mode.
Client mode utility running and WLAN Adapter scan available network. Client mode utility running and WLAN Adapter can not scan any AP . Radio Off T urn off the radio to save power .While the radio is off, the links with other wireless network nodes are disconnected.
Infrastructure and Ad-Hoc With both Infrastructure and Ad-Hoc types, the properties should look like the picture above. Six property pages present dif ferent information of current wireless network status.
8. Network Address z Mac Address: six two-digital number of this Wireless LAN USB adapter z IP Address: assigned network address by DHCP server or self-definition in four three-digital number format. z Subnet Mask: the only valid value is 2555.255.255.
5.4 A vailable Network This page present s all BSS, including AP and IBSS, around this system. Y ou can pick any one of these network connections. 1. Refresh : Rescan network connection around this system. 2. Add to Profile : Create profile for selected network connection and add it to to profile list.
5.5 St atus Page z NDIS Driver V ersion: Driver version z Short Radio Header: No z Encryption: Current encryption mode. z Authenticate: Authentication state z Channel Set: Selected channel plan currently .
5.6 St atistics Page Y ou could watch the Tx/ Rx status of current wireless connection. This p age shows a stat istic analysis of packet transition..
5.7 Wi-Fi Protect Setup.
6 Access Point Mode 6.1 General Page This page provides general information of this AP , including name, MAC address and list of joined st ations. 1. SSID : The name of this AP . 2. BSSID : Six two-digital numbers of the MAC address of this AP . 3. Association T able : It is the list of joined st ations to this AP .
a. Network Name (SSID) : Name of the AP searchable by other wireless nodes. The length of SSID should be shorter than 32 characters. b. Channel : Select the wireless channel within current channel plan. c. Network Authentication & Data Encry ption : z Open System : It is combined with data encryption type to be WEP or to be disabled.
hexadecimal number in the network key box . For example, 10 digits hex number for 64-bit WEP or 26 digits hex number for 128-bit WEP . e. Key index (advanced) (1 ~4) : At most four key index to represent the opposite network key . 6.2 Advanced Page Users could setup the advanced characteristics of network p acket for transmission on this p age.
.
6.4 ICS Page 1. ConnName : List all network connections to this system. Y ou can pick up one from the listed item(s) whose network domain you would want to connect to. 2. Select : Make the desired network connection to public network. 3. ICS : Internet Connection Sharing.
Ein wichtiger Punkt beim Kauf des Geräts Advantek Networks AWN-11N-USB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Advantek Networks AWN-11N-USB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Advantek Networks AWN-11N-USB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Advantek Networks AWN-11N-USB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Advantek Networks AWN-11N-USB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Advantek Networks AWN-11N-USB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Advantek Networks AWN-11N-USB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Advantek Networks AWN-11N-USB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Advantek Networks AWN-11N-USB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
