Benutzeranleitung / Produktwartung BJC-2000 des Produzenten Canon
Zur Seite of 121
ii Copyright This manual is co pyrig hted by Canon Comput er S ystems, Inc. (CCSI) with all r ights reser ved. U nder the c opyright laws, this manual may not be repr oduced in an y form, in whole or par t, w ithout the prior w ritten consent of CCSI.
iii Using Y our Documentation The following documentation is supplied with the Canon BJC-2000 Series Color Bubble J et™ Printer t o help you efficiently use y our new printer . Quick Start Guide This sheet describes the steps you follo w to set up y our printer and install the BJC-2000 Series Printer Driver for W indows®.
iv Distinctiv e ty pefaces identify the printer buttons y ou press, the lights on the operator panel, and any c ommands you ent er at y our comput er . ❍ The buttons y ou press appear in this typeface: RESUME button. ❍ W hen you type something on your comput er , it appears in this ty peface: DIR/P .
v 1 Introduction ...................................................................................................... 1-1 Supplies and A cc essories .................................................................................... 1-2 BJ Cart ridges and BJ T anks .
vi Printing on En velopes ......................................................................................... 3-11 U sing Canon ’ s Specialty P apers ......................................................................... 3-15 Specialty Paper G uidelines .
Chapter 1 Introduction 1-1 Introduction Congratulations on your purc hase of the Canon BJC-2000 Series Color Bubble J et Printer . W e appreciat e your c hoosing this printer to meet y our printing needs. The BJC-2000 Series printers offer exc ellent print qualit y and fast print speed using both color and black inks.
1-2 Introduction Chapter 1 Supplies and Accessories Y our BJC-2000 Ser ies printer suppor ts ex cellent and unique print media options that will allow you t o produc e dazzling, professional, and fun presentations.
Chapter 1 Introduction 1-3 Introduction N Canon has more engineers dedicated to cr eating quality ink for providing the best results for output on Bubble J et printers than an y other organization. Canon does not prohibit the use of third-part y inks and the use of third-part y inks does not invalidat e the product ’ s limited warrant y .
1-4 Introduction Chapter 1 ❍ Fabric Sheets ❍ T ransparencies ❍ Back Print Film ❍ High Gloss Film See Chapter 3, P aper H andling , for details on Canon ’ s Specialty P apers.
Chapter 1 Introduction 1-5 Introduction ❍ CD ROM drive (2x or better) (If you do not ha ve a CD ROM driv e, you can do wnload the pr inter driver fr om Canon ’ s W eb site or BBS, or call the Canon Customer Care Center t o order the P rinter Setup on diskett es for a small shipping and handling fee.
1-6 Introduction Chapter 1 ❍ T echnical suppor t v ia the Canon Computer S yst ems, Inc. W eb site ( www .c csi.canon.com ) ❍ 24-hour , toll-free F ax R etrie val Syst em ( 1-800-526-4345 ) ❍ T .
Chapter 2 Using the Printer With Windows 2-1 This chapter describes ho w to use the printer with your W indo ws applications. It includes: ❍ U nderstanding the printer driver ❍ Printing a document.
2-2 Using the Printer With Windows Chapter 2 Printing a Document This proc edure describes the general steps requir ed for printing from various W indo ws applications. The exact steps for printing a document may vary depending on the application program you are using.
Chapter 2 Using the Printer With Windows 2-3 Using the Printer Driver in Windows Y ou use the pr inter driver to define the type of printing you plan to do .
2-4 Using the Printer With Windows Chapter 2 N For detailed information on an y of the printing options, you can use the W indo ws 98, W indo ws 95, or W indows NT online Help: ❍ U se the right mouse button to click an item on the scr een; then click the W hat’ s This? c ommand.
Chapter 2 Using the Printer With Windows 2-5 Using the Printer With Windows The Windows T abs The BJC-2000 Series Printer Driver for W indows has several tabs from which y ou can select your printing options. Be sure to use the W indo ws help features to learn mor e about using these settings.
2-6 Using the Printer With Windows Chapter 2 The P aper Tab This tab allows y ou to specify paper siz e and page orientation. SPECIAL PRINTING FEA TURES: • SCALED—TURN ON TO ENLARGE OR REDUCE PRIN.
Chapter 2 Using the Printer With Windows 2-7 Using the Printer With Windows The Features T ab This tab allows y ou to specify background printing features, which include multiple co pies and page lay out.
2-8 Using the Printer With Windows Chapter 2 The Maintenance T ab This tab allows y ou to initiat e print head cleaning, roller cleaning, and test prints.
Chapter 2 Using the Printer With Windows 2-9 Using the Printer With Windows Specifying Y our Printing Options on the Windows Tabs Be sure to use y our online help t o find out about the settings available for each printing option. ❍ T o move between the W indo ws tabs, click on any of the tabs.
2-10 Using the Printer With Windows Chapter 2 ❍ For normal printing, select one of the following Print M odes: Text For standar d printing quality . Auto T o pr int text, photos, illustrations, tables, and g raphics at higher than normal pr inting quality .
Chapter 2 Using the Printer With Windows 2-11 Using the Printer With Windows Customizing the Print Mode Settings On the Main tab , you can click the A dvanc ed button to cust omize the selected P rint Mode.
2-12 Using the Printer With Windows Chapter 2 The Color T ab ENABLE OR DISABLE COLOR ADJUSTMENT (USING COLOR ADJUSTMENT REDUCES PRINTING SPEED) RESTORES THE DEF AUL T SETTINGS ADJUSTS THE LUMINOSITY O.
Chapter 2 Using the Printer With Windows 2-13 Using the Printer With Windows The Save T ab N Y ou cannot use the names of existing modes (T ext, A uto, etc.
2-14 Using the Printer With Windows Chapter 2 Executing a Print Job After y ou start a print job, the following three features start up in sequence. ❍ BJ Background Monitor Displays the status of the print jobs in the background. Use the background monitor to c hange the order of the print jobs or cancel a print job.
Chapter 2 Using the Printer With Windows 2-15 Y ou see this screen: N For mor e details about the BJ Background M onit or , select He lp from the Help menu of the BJ Background M onitor . BJ Backgrounder The BJ Backgrounder screen looks similar t o this: Using the Printer With Windows NAMES OF DOCUMENT PRINTING AND DOCUMENTS QUEUED FOR PRINTING.
2-16 Using the Printer With Windows Chapter 2 BJ Status Monitor T o open the BJ Status Monitor during printing, click its button on the T ask Bar . N For information about the BJ Status M onit or , click He lp to pull down the Help men u and select Screen T opics .
Chapter 2 Using the Printer With Windows 2-17 Printing Speed V ersus Color The BJC-2000 Series Printer Driver for W indows can interpret and translate the full spectrum of colors, up to 16.7 million c olors. W hen printing in color , there is a significant increase in the amount of information that the driver has to int erpret and translate.
2-18 Using the Printer With Windows Chapter 2 ❍ Free up your memory U se only one softwar e program at a time and unload any scr een saving utilities or programs stored in W indows background; this frees up mor e memor y for W indows processing.
Paper Handling Chapter 3 P aper Handling 3-1 This chapter describes ho w to use the printer for all y our printing operations. It includes: ❍ Selecting paper ty pes ❍ Setting the paper thickness l.
3-2 P aper Handling Chapter 3 Selecting P aper T ypes One of the most impor tant things you can do to assur e the best possible performance of your Bubble J et printer is to select the c orrect paper .
Paper Handling Chapter 3 P aper Handling 3-3 Brilliant White P aper Canon ’ s unique paper formulation gives y ou a bright white printing surface that pr oduces incr edibly brilliant colors and dark, cr isp black text.
3-4 P aper Handling Chapter 3 Fabric Sheets U se Fabric Sheets for Canon Bubble J et printers to print pillow c o v e r s, scarves, flags, and other textile items. Use these sheets for appliqués an d other craft and sew ing projects. Fabric sheets are 9.
Paper Handling Chapter 3 P aper Handling 3-5 P aper Guidelines W hen selecting or loading paper , please remember the follo wing: ❍ Att empting to print on damp , curled, w rinkled, or torn paper can cause paper jams and poor print qualit y . ❍ U se cut-sheet paper only .
Setting the P aper Thickness Lever T o ensure trouble-free paper handling, you ’ll want to set the blue paper thickness lever befor e loading paper .
Chapter 3 P aper Handling 3-7 Printer Settings for V arious Print Media P aper P aper thickness output Media lever guides P aper feed limit (Sheets) Plain paper Left Down Appr o x. 50 (0.2 " or 5 mm stack) Glossy Photo P aper Left U p 10 Banner P aper Left U p 1 (2 to 6) Brilliant W hite P aper Left Down Appr o x.
3-8 P aper Handling Chapter 3 Automatically Feeding P aper ❍ Mak e sure the printer is plugged in. ❍ Mak e sure the paper support is attached to the printer .
Chapter 3 P aper Handling 3-9 Paper Handling ❍ For best r esults, fan the paper before loading it. ❍ Alwa ys fan a stack of paper along the edge that w ill feed into the printer first. ❍ Align the edge of the paper stack with the rig ht edge of the sheet feeder .
3-10 P aper Handling Chapter 3 ❍ U se the printer driv er to set an y necessary print properties; for example, you need to change the settings in the printer driver if you ar e printing photos or using special paper .
Chapter 3 P aper Handling 3-11 Paper Handling ❍ Do not tr y to load paper into the sheet feeder beyond the paper limit mark ( ) on the left side or the tabs on both sides of the sheet feeder; stacking t oo much paper ma y cause paper feeding or printing problems.
3-12 P aper Handling Chapter 3 The following en velopes ar e not rec ommended because they may cause jams or smears, or may damage your printer . ❍ En velopes with windows, holes, perforations, cutouts, and double flaps. ❍ En velopes made with special coated paper or deeply embossed paper .
Chapter 3 P aper Handling 3-13 Paper Handling ❍ Arrange the stack of en velopes on a firm surfac e and press down firmly on the edges to make the folds crisp . ❍ Pr ess all the way ar ound the en v elopes to re mov e an y curls and expel air from inside the en v elopes.
3-14 P aper Handling Chapter 3 ❍ Slide a stack of env elopes into the sheet feeder until it stops. ❍ The top of the en velope goes in first with the flap to ward the sheet feeder . ❍ Pinch the paper guide so it will move smoothly and slide the paper guide snug against the left side of the stack.
Chapter 3 P aper Handling 3-15 Paper Handling Using Canon’ s Specialty P apers This section pro vides guidelines for pr inting on Canon ’ s Specialty P apers and describes special procedur es requir ed for High Resolution P aper , Fabric Sheets, Banner Paper , and Glossy Photo P aper and Car ds.
3-16 P aper Handling Chapter 3 ❍ Do not leav e the film in the sheet feeder for long periods of time. Dust and dirt may accumulat e on the film resulting in spotty printing . ❍ T o avoid sm udging caused by fingerpr ints, use a pair of thin cloth gloves while loading and handling the film.
Paper Handling 3-17 P aper Handling Chapter 3 ❍ Y ou may want to fasten the r oll with a small piece of tape. High Resolution P aper Using the Printer’ s Output T ray The paper output tray on your printer is equipped with paper output guides.
Chapter 3 P aper Handling 3-18 Paper Handling Using the Cleaning Sheet Canon ’ s High R esolution P aper is designed for high qualit y printing . This paper is specially coated t o produc e delicate c olor output.
Paper Handling 3-19 P aper Handling Chapter 3 ❍ R emov e the two piec es of tape from the sheet. ❍ Insert the sheet w ith the sticky side out (to ward y ou) and down (going into the printer’ s sheet feeder). ❍ A djust the paper guide to the edge of the cleaning sheet.
Chapter 3 P aper Handling 3-20 ❍ Open the Printer Driv er Pr operties w indow . ❍ Click the Maintenanc e tab . ❍ On the Maint enance tab , click the roller cleaning ic on. ❍ W hen prompt ed to c onfirm the cleaning, click Ye s . ❍ The printer feeds the sheet and then ejects it.
Paper Handling 3-21 P aper Handling Chapter 3 Fabric Sheets Fabric Sheets for Canon printers come with a booklet that describes special handling proc edures. Be sure to look thr ough this booklet for special information regarding the F abric Sheets. This section describes specific steps for using Fabric Sheets with this printer .
Chapter 3 P aper Handling 3-22 ❍ Insert the sheet w ith the cloth side out (to ward y ou) and the open end up (awa y fr om the printer’ s sheet feeder). ❍ Pinch the paper guide so it will move smoothly and slide the paper guide snug against the left side of the sheet.
Paper Handling 3-23 P aper Handling Chapter 3 ❍ In the M ain tab , select Fabric Sheet for the M edia T y pe. ❍ In the P aper tab, select Letter or A4 for the P aper Siz e. ❍ Change other settings as required. ❍ Start the pr int operation from your W indows application.
Chapter 3 P aper Handling 3-24 Printing on Banner P aper For best r esults, use Canon Banner P aper . T o set up a pr int job on banner paper , you must decide on the number of sheets you need. Y ou can print banners from 2 to 6 sheets in length. N Alwa ys leav e an extra sheet at the end of the banner—just in case the ty pe runs over .
Paper Handling 3-25 P aper Handling Chapter 3 ❍ Mak e sure the printer is plugged in. ❍ Mak e sure the paper support is attached to the printer . ❍ Open the front c ov er and mak e sure the blue paper thickness lever is set to the left. Close the fr ont co ver .
Chapter 3 P aper Handling 3-26 ❍ The minimum length is two sheets. ❍ The maximum length y ou can use is six sheets (66 inches or 1676 mm). ❍ Alwa ys leav e an extra sheet at the end of the banner—just in case the ty pe runs over .
Chapter 3 P aper Handling 3-27 Paper Handling ❍ Gently fold the paper at the perforations between the first and second sheet. ❍ Place the printer at the edge of the desk so at least two sheets are supported by the desk. Adjust the printer location.
3-28 P aper Handling Chapter 3 ❍ Open the W indows application you ar e going to use t o print. Fr om the File menu, select Print . Then select your print options using the BJC-2000 Series Printer Driver for W indo ws. • Fo r M edia T y pe, select Plain P aper .
Chapter 3 P aper Handling 3-29 Paper Handling Loading Glossy Photo P aper and Glossy Photo Cards W hen you load Glossy Phot o P aper or Glossy Phot o Cards in the printer , alwa ys use the Loading Support Sheet provided with the package.
3-30 P aper Handling Chapter 3 ❍ Insert the stack into the sheet feeder . N Before loading Glossy Photo Car ds in the printer , read the instructions pro vided w ith the package of Glossy Photo Car ds.
Chapter 4 Maintaining the Printer 4-1 Maintaining the Printer This chapter c ov ers the care r equired for y our printer . It includes: ❍ Printer guidelines ❍ Cleaning the printer ❍ Printing the.
4-2 Maintaining the Printer Chapter 4 Printer Guidelines Follo w these guidelines to a v oid damage to y our printer and harm to you or others: ❍ Set the printer on a stable surface. Do not use an angled pr inter stand. A void setting the printer in dir ect sunlight.
Chapter 4 Maintaining the Printer 4-3 ❍ Do not place the printer too close t o a fluoresc ent lamp . Allo w at least six inches (15 cm) clearance between the printer and an y fluoresc ent lamp. Fluoresc ent lamps generate electrical noise that may cause printer malfunctions.
4-4 Maintaining the Printer Chapter 4 ❍ Clean the exterior of the pr inter with a soft cloth moistened with water . ❍ Clean awa y smudges and dust.
Chapter 4 Maintaining the Printer 4-5 Y ou use the T est Prints option on the Maint enance tab in y our BJC-2000 Series Printer Driver for W indo ws to print a N ozzle Check P attern.
4-6 Maintaining the Printer Chapter 4 Cleaning the Print Head Y our pr inter is equipped with a pr int head cleaning function to ensure constant high quality printing . Y ou star t pr int head cleaning from the M aintenanc e tab in the printer driver .
Chapter 4 Maintaining the Printer 4-7 BJ Cartridge Guidelines Y ou can use these car tr idges with the pr inter: ❍ BC-2 1e Color BJ Cartridge Contains the print head unit and two r eplaceable BJ tanks—the BCI-21 Color BJ T ank contains c olor ink (cyan, magenta, yellow) and the BCI-21 Black BJ T ank contains black ink.
4-8 Maintaining the Printer Chapter 4 If you ar e using the BC-21e Color BJ Cartr idge and your output is blank, one of the BJ tanks is probably out of ink.
.
Replacing the BJ Cartridge The following proc edure describes how t o replac e the BC-21e Color BJ Cart ridge w ith the BC-20 Black BJ Cart ridge. Follo w the instructions in this section to re place an old BJ cartr idge or to change BJ cartridges when you ar e switching between an y of the BJ car tridges.
Chapter 4 Maintaining the Printer 4-11 Maintaining the Printer ❍ Lift the blue lock lever on the cartr idge holder . ❍ Slide the BJ cart ridge out of the holder . ❍ If you ar e replacing an old BJ cartridge, dispose of the old cart ridge properly .
4-12 Maintaining the Printer Chapter 4 ❍ P eel off the prot ectiv e foil. ❍ Lift off the orange cap from the print head and then remo ve the orange tape. Set the BJ cartridge into the cartridge holder . Remove the protective material from the BJ cartridge.
Chapter 4 Maintaining the Printer 4-13 Maintaining the Printer ❍ Pr ess the blue lock lever do wn completely ; do not use ex cessiv e forc e. ❍ The BJ cart ridge is now positioned and locked. C Do not manually mov e the mechanism that houses the BJ cart ridge.
4-14 Maintaining the Printer Chapter 4 C W henever the printer stops printing, the BJ car tr idge mov es to the home position on the rig ht and caps itself.
Chapter 4 Maintaining the Printer 4-15 Maintaining the Printer ❍ Grasp the top of the co ver in the c enter and pull it forward. ❍ The cart ridge holder moves to the c enter of the printer . ❍ The color BJ tank is on the left; the black BJ tank is on the rig ht.
4-16 Maintaining the Printer Chapter 4 ❍ Then remo ve the pr otecti ve cap . ❍ Slide the new BJ tank into the empty slot on the BJ cart ridge. ❍ Pr ess firmly on the tab on the top of the BJ tank until it locks into place. ❍ Mak e sure eac h BJ tank is correctly seat ed in its respecti ve slot.
Chapter 4 Maintaining the Printer 4-17 Maintaining the Printer ❍ Pr ess firmly to close the co ve r . ❍ The printer mov es the cart ridge holder to the home position on the rig ht of the pr inter . ❍ The printer automatically cleans the print head unit.
4-18 Maintaining the Printer Chapter 4 ❍ Y ou must inser t the car tridge correctly or the storage bo x will not close. ❍ The prot ectiv e cap must be remo ved fr om the cartr idge before y ou set it in the storage bo x. ❍ Be sure the lid snaps closed.
Chapter 4 Maintaining the Printer 4-19 Maintaining the Printer If you ha ve mor e than one Ink Cartridge Storage Box, you can hook them together . Simply connect them by the slides and groo ves on the sides of the containers.
4-20 Maintaining the Printer Chapter 4 ❍ Mak e sure the print head is in the home position. ❍ R emov e an y paper from the sheet feeder . ❍ Detach the interfac e cable. ❍ U nplug the printer and detach the po wer c or d. ❍ R emov e the paper support and paper output tr ay .
Chapter 4 Maintaining the Printer 4-21 Maintaining the Printer ❍ T ape the cov er t o the printer body . ❍ Cov er the printer with its shipping bag.
4-22 Maintaining the Printer Chapter 4 N Do not remo ve the BJ cartr idge from the printer or ship a BJ car t ridge or an ink tank from which y ou hav e remo ved the pr otective cap .A n opened BJ cart ridge or BJ tank that is not installed in the printer may leak, and the pr int head may dry out.
T roubleshooting Chapter 5 Troubleshooting 5-1 Due to toda y’ s rapidly changing computer en vironment, we ha ve plac ed troubleshooting information in a variet y of places to ensure that the most accurate information possible is available.
5-2 Troubleshooting Chapt er 5 The serial number is located on the label on the back of the printer : N Att empting to r epair the printer yourself ma y void the limit ed warrant y as to that re pair . See the limited warrant y information that came w ith your printer for details.
Chapter 5 Troubleshooting 5-3 The BJ Printer Status M onit or uses messages and pictures t o display the printing progress and the status of the printer while it is printing . W hen the ink or paper runs out or a paper jam occurs, the BJ Printer Status M onitor aut omatically appears.
5-4 Troubleshooting Chapt er 5 Cannot Install the Printer Driver Cause Solution Installation was Install the printer driver interrupted R efer to the Quick S tart Guide and install the pr inter driver using the c orrect proc edure.
Chapter 5 Troubleshooting 5-5 Cause Solution Pr oblem with the Check that the W indows 98, W indo ws 95, or W indo ws CD ROM (c ontinued) NT Explorer or the W indo ws 3.1 File M anager can successfully r ead the CD . If the CD is unreadable, call the Canon Cust omer Care Center (see page 1-5).
5-6 Troubleshooting Chapt er 5 An Error Message Appears Printing does not star t due to an er ror wr iting to LPT1. Cause Solution Printer is not on Check the power cord Mak e sure the printer is plugged in t o a pow er outlet.
Chapter 5 Troubleshooting 5-7 Cause Solution Printer port LPT1: fault Check the status of the printer port LPT1 Click on Start , Sett ings , and Control P anel . Double-click on the Syst em icon. On the Device Manager tab , double- click P orts (COM & LPT) .
5-8 Troubleshooting Chapt er 5 Printing does not star t due to an application er ror or General Protection F ault. Cause Solution Printing from a Change applications W indo ws 3.1 application A W indows 3.1 application installed on a W indows 98 or W indo ws 95 system may cause this pr oblem.
Chapter 5 Troubleshooting 5-9 Cause Solution Installed printer driv er Reinstall the printer driver not operating correctly R emov e the installed BJ printer driver and then install the printer driver again. T o uninstall the pr inter driver , click Star t and select Programs .
5-10 Troubleshooting Chapt er 5 Printing Halts Cause Solution The print job may be a Check the printer operation.
Chapter 5 Troubleshooting 5-11 Cause Solution Printer cable fault Try to use another printer cable Mak e sure the cable is an IEEE 1284-c ompatible parallel interface cable. S witching dev ice or Disconnect the switching device or external buffer external buffer fault Print with the printer directly connect ed to the c omputer .
5-12 Troubleshooting Chapt er 5 Printed pages curled/warp ed/w r inkled Cause Solution Ex cess ink is being Check your media type absorbed by the paper If you ar e printing on very thin paper , tr y a different paper ty pe. Print on special print media such as High R esolution P aper or Glossy Photo P aper .
Chapter 5 Troubleshooting 5-13 T roubleshooting Using the Resume Button Y ou use the RESUME button to perform two functions: ❍ Pr ess and hold the RESUME button t o reset the printer and resume printing . ❍ Double-click the RESUME button to print a N ozzle Check P att ern.
5-14 Troubleshooting Chapt er 5.
Specifications Appendix A Specifications A-1 Printing Specifications Printing Method Bubble J et ink on-demand Printing Resolution 720 (vertical) × 360 (horizontal) dpi (maximum) Print Speed BC-21e Color Draft mode—up to 4.5 ppm BJ Cart ridge Standard mode—up to 3.
A-2 Specifications Appendix A Sheet Feeder Capacity – Auto Feed Only Maximum thickness of stack ed paper: 0.2 inches (5 mm) Plain paper (20 lb or 75 g/ m 2 ) A ppro x. 50 sheets Glossy photo paper 10 sheets Banner paper 1 sheet (2 to 6 sheets long) Brilliant white paper Appr o x.
Appendix A Specifications A-3 Media Type Recommended Glossy photo paper Canon Glossy Photo P aper Banner paper Canon Banner P aper Brilliant white paper Canon Brilliant W hit e P aper High resolution .
A-4 Specifications Appendix A A5, A4, B5 Printable Area (width x length) A5 141.2 mm × 200 mm A4 203.2 × 287 mm B5 75.2 × 247 mm Fabric Sheets Printable Area (width x length) Fabric Sheet 203.2 mm × 287 mm Glossy Photo Card Printable Area (width x length) Glossy Photo Card 109.
Appendix A Specifications A-5 Specifications U.S. Commercial No. 1 0 Envelope Printable Area (width x length) U .S. Commer cial #10 8.25 in × 3.72 in European DL Envelope Printable Area (width x length) Eu ropean DL 207.
A-6 Specifications Appendix A BJ Cartridges BC-2 1e Color BJ Cartridge Print head 64 nozzles for black 24 nozzles for each c olor (cyan, magenta, yel low ) Print head life Appr o ximately 2,000 c olor.
Appendix A Specifications A-7 General Interface IEEE 1284 compatible parallel interfac e Acoustic Noise Level Appr o x. 49 dB(A) per ISO 9296 Operating Environment T emper ature 41° F to 95° F (5° .
A-8 Specifications Appendix A.
Installing Printer Driver Windows 3.1 Appendix B Installing the Printer Driver for Windows 3.1 B-1 This appendix describes how you install the BJC-2000 Series P rinter Driver for W indo ws 3.1. If you ar e using W indows 98 or W indows 95, see the Quick Start Guide .
B-2 Installing the Printer Driver for Windows 3.1 Appendix B ❍ W hen you see this scr een: Ty p e D:SETUP (where D: is y our CD drive… most CD drives ar e D: or E: ). Then click OK . ❍ Select BJC-2000 Series from the list of printers. ❍ Be sure to wait for W indows to co mplete each operation.
Appendix C Installing the Optional Color Image Scanner C-1 Installing Color Image Scanner Y ou can easily con vert your printer into a c olor scanner by installing the optional IS-22 Color Image Scanner Cartridge. This section describes how t o install and remo ve the C olor Image Scanner Cartr idge.
❍ Handle the scanner cartridge carefully . ❍ Do not touch the scanning head ar ea. ❍ Hold the scanner cartridge by the ridges on either side of the cart ridge.
Appendix C Installing the Optional Color Image Scanner C-3 Installing Color Image Scanner ❍ The cart ridge holder moves t o the home position on the rig ht. ❍ For details about installing the IS Scan scanner driv er , refer to the IS-22 C olor I mage Scanner Cartr idge User’ s Manual .
C-4 Installing the Optional Color Image Scanner Appendix C C N ever stor e the IS-22 Color I mage Scanner Cartr idge in an Ink Cart ridge Storage Box that has been used for a BJ cartridge.
Glossar y G-1 Automatic feed R efers to one wa y in which paper can be fed into the printer when the sheet feeder is used. BJ cartridge The printing mechanism that contains the print head unit and BJ tanks. BJ tank The special ty pe of ink container housed b y the BJ cartr idge.
G-2 Glossar y dB(A) Stands for decibel level (a decibel being a unit of measurement for the intensity of the sound coming from the printer), adjusted for background noise. dpi Dots per inch. A unit of measurement for indicating a printer’ s resolution.
Glossar y G-3 lpi Lines per inch. The measurement used in describing the number of lines that will pr int w ithin one vertical inch. Most printing is done in 6 or 8 lpi. Manual feed A method of feeding paper to the printer one sheet at a time. Noise level See dB(A).
G-4 Glossar y Printable area The area of a sheet of paper on which a printer can reproduc e text or graphics (the pr inting area is smaller than the paper). On this printer , the printing area varies depending on the t ype of paper being used. Printer driver Software that sends printing instructions to a printer .
Index I-1 Index A A4-size paper: A-2, A -4 A5-size paper: A-2, A -4 A cc essories: 1-2–4 A coustic noise lev el: A-7 A dvanced settings: 2-5, 2-11–13 Application err or: 5-8 A uthorized Serv ice F.
I-2 Index Canon A uthorized Serv ice Facility: 1-6 Bulletin Board Service: 1-6, 5-1 Canada: 1-6 C ustomer Care Cent er: 1-5–6, 5-1 Fax R etrieval System: 1-6, 5-1 Re ferr al Serv ice: 1-2 Scanner Ca.
Index I-3 G General Prot ection Fault: 5-8 General specifications: A-7 Glossy Photo Cards: 1-3, 3-3, 3-7, 3-29–30, A -2–4 Glossy Photo P aper: 1-3, 3-2, 3-7, 3-15, 3-29–30, 4-7, A -2–3 Graph p.
I-4 Index Microsoft: See W indows Mirror image printing: 3-3–4 M ultipart paper: 3-5 N N ormal printing: 2-10 N ormal-size printing: 2-6 N ozzle Check P att ern: 2-8, 4-4–6, 4-14, 5-10–13 N ozzl.
Index I-5 Print head: 4-3, A -6 area: 4-9 cleaning: 2-8, 4-6 life: A -6 Print mode: 2-5, 2-11, 2-16 customizing: 2-11–13 icon: 2-14 settings: 2-11–12 Print quality : 2-5, 2-10–11, 4-4 problems: 5-3 vs.
I-6 Index S Sales receipt: 1-6 Sav e tab: 2-13 SB-21 Ink Cartr idge Storage Bo x: 1-3, 4-8, 4-11, 4-17–19 Scaled printing: 2-6 Scanner cart ridge: 1-4, A-7, C-1–4 head: C-1 paper handling: A-7 rem.
FCC Regulations FCC-1 FCC Regulations This equipment has been tested and found t o comply with the limits for a Class B digital dev ice, pursuant to P art 15 of the FCC R ules. These limits are designed to pr ovide reasonable prot ection against harmful interferenc e in a residential installation.
FCC-2 FCC Regulations.
Ein wichtiger Punkt beim Kauf des Geräts Canon BJC-2000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon BJC-2000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon BJC-2000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon BJC-2000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon BJC-2000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon BJC-2000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon BJC-2000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon BJC-2000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon BJC-2000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
