Benutzeranleitung / Produktwartung FK303 des Produzenten Buhler
Zur Seite of 40
25 Series Rotary Tiller TABLE OF CONTENTS DESCRIPTION PAGE Warranty ............................................................................... 1 Introduction ........................................................................ 2 Safety ......
25 Series Rotary Tiller TABLE OF CONTENTS – cont’d. Bolt Torque ......................................................................... 27 Parts Lists and Drawings Tiller Drawings ........................................................... 28 & 29 Tiller Parts List .
25 Series Rotary Tiller - 1 - WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper ap plications.
25 Series Rotary Tiller - 2 - INTRODUCTION Congratulations on your choice of a Buhler Farm King 25 Series Rotary - Tiller to complement your landscaping operation. This equipment has been designed and manufactured to meet the needs of a discerning landscaping industry for the efficient tilling of soil.
25 Series Rotary Tiller - 3 - SAFETY YOU are responsible for the SAFE operation and maintenance of your Buhler F arm King 25 Series Rotary - Tiller. YOU must ensure that you and anyone else who is goi.
25 Series Rotary Tiller - 4 - GENERAL SAFETY 1. Have a first - aid kit available for use and kno w how to use it should the need arise. 2. Have a fire extinguisher available for use and know how to use it should the need arise. 3. Wear appropriate protective gear.
25 Series Rotary Tiller - 5 - MAINTENANCE SAFETY 1. Follow ALL the operating, maintenance and safety information in the manual. 2. Support the machine with blocks or safety stands when working beneath it. 3. Follow good shop practices - Keep servic e area clean and dry.
25 Series Rotary Tiller - 6 - How to Install Safety signs: * Be sure that the installation area is clean and dry. * Decide on the exact position before you remove the backing paper.
25 Series Rotary Tiller - 7 - SAFETY SIGN LOCATION S – cont’d. Safety sign “A” Safety sign “B” Safety sign “C” Safety Sign “C” REMEMBER - If Safety signs have been damaged, removed, become illegible or par ts replaced without safety signs, new safety signs must be applied.
25 Series Rotary Tiller - 8 - OPERATION TO THE NEW OPERATOR OR OWNER The Buhler Farm King 25 Series Rotary Tiller is a machine that combines the prima ry and secondary tillage operation into one machine. It breaks up the soil and prepares the seed bed in one pass.
25 Series Rotary Tiller - 9 - MACHINE BREAK - IN Although there are no operational restrictions on the Tiller when used for the first time, it is recommended that the following mechanical items be checked: A. After operating for 1/2 hour or after completing 1/2 acre: 1.
25 Series Rotary Tiller - 10 - EQUIPMENT MATCHING To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor with the correct specifications. Use the following list as a guide in select ing a tractor to use on the machine.
25 Series Rotary Tiller - 11 - DRIVELINE DIMENSION A PTO driveline is supplied with the machine. To accommodate the vari ety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but not bottom out when going through its working range.
25 Series Rotary Tiller - 12 - DRIVELINE DIMENSION - CONT'D. 7. Pull the driveline a part and cut 1/2 of the dimension determined in step 5 from each end. Add another ½ inch (12MM) to each cut off segment. 8. Be sure to use a hacksaw to cut 1/2 from each end of the separated shaft.
25 Series Rotary Tiller - 13 - ATTACHING/UNHOOKING The Tiller should always be loc ated on a level, dry area that is free of debris and other foreign objects. When attaching the machine to a tractor, follow this procedure: 1. Clear the area of bystanders, especially small children.
25 Series Rotary Tiller - 14 - FIE LD OPERATION Buhler Farm King 25 Series Rotary Tillers are designed with the inherent flexibility of operating well in almost any kind of soil and terrain conditions. However, the operator has the responsibility of being familiar with all operating and s afety procedures and following them.
25 Series Rotary Tiller - 15 - FIELD OPERATION - cont'd. 7. Align the unit with the working area. 8. Starting machine: a. Run the engine at low idle. b. Slowly engage the PTO control to start the machine. c. Slowly bring the engine to the rated PTO speed.
25 Series Rotary Tiller - 16 - FIELD OPERATION - cont'd. e. The rotation of the Tines propel the machine in the forward direction. Always use the tractor transmission to control the spee d of forward travel. f. Always disengage the PTO control and raise the machine out of the ground before depressing the master clutch on the tractor.
25 Series Rotary Tiller - 17 - TRANSPORTING When transporting the machine, review and follow these instructions: 1. Be sure all bystanders are clear of the machine. 2. Be sure that the machine is securely attached to the tractor and all retainer pins are installed.
25 Series Rotary Tiller - 18 - STORAGE After the season's use, the machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at the start of next season.
25 Series Rotary Tiller - 19 - SERVICE AND MAINTENANCE SERVICE Follow Maintenance Safety Instructions as outlined. FLUIDS AND LUBRICANTS 1. Hydraulic Oil: Use a standard hydraulic oil for all operating conditions. 2. Gear Box Oil: Use an SAE 85W90 gear oil for all operating conditions.
25 Series Rotary Tiller - 20 - SERVICING INTERVALS The periods recommended below are based on normal operating conditions. Severe or unus ual conditions may require more frequent lubrication or oil changes. 8 Hours or Daily; Telescoping Tubes and Quick Disconnect 20 Hours 1.
25 Series Rotary Tiller - 21 - SERVICING INTERVALS – cont’d. 40 Hours 1. Check gear box oil level. Add as required 2. Add approximately 10 squirts of grease in chain case. Annually 1. Change gearbox oil. Refill with SAE 85W90 gear oil. 2. Wash machine.
25 Series Rotary Tiller - 22 - MAINTENANCE By following a careful service and maintenance program for your machine, you will enjoy many years of trouble - free operation. A - FRAME ADJUSTMENT When moving the hitch along the front frame to adjust the offset, follow this procedure: 1.
25 Series Rotary Tiller - 23 - SHEAR BOLT A shear pin is provided in t he input drive shaft at the gearbox to protect the drive system during an overload. To change the shear pin, follow this procedure: 1. Place all controls in neutral, stop engine, set park brake, remove ignition key and wait for all moving parts to stop before dismounting.
25 Series Rotary Tiller - 24 - CLUTCH MAIN TENANCE 1. Before first use or after storage of more than one month, the clutch should be checked. 2. Disengage clutch by turning in the four socket set screws. 3. Run the PTO at low idle to slip the clutc h linings.
25 Series Rotary Tiller - 25 - TROUBLE SHOOTING The Buhler Farm King 25 Series Rotary Tiller moves curved Tines on a turning rotor through the ground to break it up and prepare a seed bed. It is a simple and reliable system that requires minimal maintenance.
25 Series Rotary Tiller - 26 - ASSEMBLY The machine is shipped with the PTO shaft not installed. To install the PTO d riveline on the machine, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Clean the splines on the yoke and the input shaft.
25 Series Rotary Tiller - 27 - BOLT TORQUE CHECKING BOLT TORQUE The tables shown below give correct torque values for various bolts and cap screws. Tighten all bolt s to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide.
25 Series Rotary Tiller - 28 - 40”, 48” & 60” 25 SERIES TILLERS.
25 Series Rotary Tiller - 29 -.
25 Series Rotary Tiller - 30 - PARTS LIST WHEN ORDERIN G PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
25 Series Rotary Tiller - 31 - 21 983000471 1/4" X 11 Link Chain 22 967357 Drag Shield Bracket 23 903156 A - Frame Brace Pl 24 967483 Tine - R 25 967484 Tine - L 26 983000241 Depth Gauge Shoe Bra.
25 Series Rotary Tiller - 32 - 65 9812767 1/2'' GR.8 Lock Washer (pl) 66 965807 CAT. 1 Top Link Pin 67 967279 Tension Spring Spacer (1 5/8''L) 68 84270 5/8'' x 1 3/4&apos.
25 Series Rotary Tiller - 33 - 25 SERIES TILLER PTO (SHEAR PIN).
25 Series Rotary Tiller - 34 - 25 SERIES TILLER PTO PARTS LIST (SHEAR PIN) ITEM PART NO. DESCRIPTION F0357 Shaft Complete 908251 Outer Half Shaft - Tract or 908252 Inner Half Shaft w/Shear - Implement.
25 Series Rotary Tiller - 35 - 25 SERIES TILLER PTO (SLIP CLUTCH).
25 Series Rotary Tiller - 36 - 25 SERIES TILLER PTO PARTS LIST (SLIP CLUTCH) ITEM PART NO. DESCRIPTION F0356 Shaft Complete 908258 Outer Half Shaft 936515 Inner Half Shaft 1 907936 Yoke 2 920 - 002 Se.
25 Series Rotary Tiller - 37 - 25 SERIES TILLER GEARBOX 25 SERIES TILLER GEARBOX PARTS LIST ITEM PART NO. DESCRIPTION QUANTITY 912300164 Gearbox Complete 1 1 967300 Housing 1 2 967301 Hex Shaft 35.2 mm Dia. 1 3 967302 Cover 110mm Dia. 1 4 967303 Snap Ring, E.
25 Series Rotary Tiller - 38 - SHIPPING BUNDLES QUANTITY BUNDLE REQUIRED NUMBER DESCRIPTION C2540 40” Tiller c/w slip clutch PTO 1 F0155 Deck Assembly 1 F0356 PTO C2548 48” Tiller c/w slip clutch .
Ein wichtiger Punkt beim Kauf des Geräts Buhler FK303 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Buhler FK303 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Buhler FK303 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Buhler FK303 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Buhler FK303 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Buhler FK303 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Buhler FK303 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Buhler FK303. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Buhler FK303 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
