Benutzeranleitung / Produktwartung FAX-222 des Produzenten Brother
Zur Seite of 99
F AX- 202 F AX- 222 F AX- 333MC ® O WNER’ S MANU AL.
If Y ou Need to Call Customer Service Please complete the following information for future reference: Model: F AX-202 F AX-222 F AX-333MC (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: * The serial number is on the underside of the unit.
i Table of contents 1 INTRODUCTION .......................................................................... 1-1 Using This Manual .................................................................... 1-1 Finding Information ..........................
ii Function Selection Table .................................................... 3-2 4 Initial Setup ..................................................................................... 4-1 Getting Started ............................................
iii Setting Up Polling Receive ................................................ 5-8 Setting Up Delayed Polling Receive .................................. 5-8 Setting Up Sequential Polling Receive (For FAX-333MC Only) ..................................
iv Storing One Touch Dial Numbers/Storing Junk Fax/Call Numbers ........................................................................... 7-1 Storing Speed Dial Numbers/Storing Junk Fax/Call Numbers ..................................................
v Message Indicator ............................................................... 9-3 Playing Voice Messages ..................................................... 9-4 Printing a Fax Message ...................................................... 9-4 Backup Printing Option .
vi Error Messages ................................................................. 13-1 Recording Paper Jam ........................................................ 13-3 If You Are Having Difficulty with Your Fax Machine .... 13-4 Printing or Receiving Faxes .
INTRODUCTION 1 - 1 1 1 Introduction Using This Manual Thank you for purchasing a Brother fax machine. This fax machine has been designed to be simple to use, with LCD screen prompts to guide you through functions. However, you can use your fax machine to its fullest potential by taking a few minutes to read this manual.
1 - 2 INTRODUCTION Fax Tones and Handshake When someone is sending a fax, the fax machine sends fax calling tones (CNG tones)—soft, intermittent beeps at 4-second intervals. You’ll hear them when you dial and press Start , and they continue for about 40 seconds after dialing.
INTRODUCTION 1 - 3 FAX-202 and FAX-222 Control Panel Overview 1 6 7 10 11 8 9 LCD (Liquid Crystal Display) Displays messages to help you set up and operate your fax machine. 5 Hook Lets you dial telephone and fax numbers without lifting the handset. 4 Search/Speed Dial Lets you dial stored phone numbers by pressing # and a two-digit number.
1 - 4 INTRODUCTION FAX-333MC Control Panel Overview 1 LCD (Liquid Crystal Display) Displays messages to help you set up and operate your fax machine. 5 Speaker Phone Lets you speak to the person at the other end and dial telephone numbers without lifting the handset.
LOCATION AND CONNECTIONS 2 - 1 2 2 Location and Connections Caution 1 Never install telephone wiring during a lightning storm. 2 We recommend that this product be used with a surge protection device to protect the product against lightning storms.
2 - 2 LOCATION AND CONNECTIONS Choosing a Location Place your fax machine on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the fax machine near a telephone jack and a standard, grounded power outlet.
LOCATION AND CONNECTIONS 2 - 3 There are two different types of recording paper roll size (216mm/210mm). If you use 210mm recording paper roll size, please set recording paper after attaching the paper guides as below. 4 Raise the paper enough to pass it over the until it feeds out the front of the machine.
2 - 4 LOCATION AND CONNECTIONS About Brother Paper For the best print quality, use Brother Therma Plus Paper, Item Numbers 6890 (two 98’ rolls) or 6840 (four 98’ rolls). Therma Plus paper is thicker, like plain paper, and produces the best print quality.
LOCATION AND CONNECTIONS 2 - 5 1 Connect the handset Connect the curled handset cord to the bottom of the handset and the side of the fax machine. 2 Connect the power cord. 3 Connect the telephone line. Connect one end of the telephone line cord to the jack labeled LINE on the left side of the machine.
2 - 6 LOCATION AND CONNECTIONS Multi-Line Connections (PBX) Most offices use a central telephone system. While it is often relatively simple to connect the fax machine to a key system or a PBX (Private Branch Exchange), we suggest that you contact the company that installed your telephone system and ask them to connect the fax machine for you.
LOCATION AND CONNECTIONS 2 - 7 Connecting an External Telephone Answering Device (TAD) (TAD Cannot Be Connected in Some Countries) Sequence You might choose to connect an additional answering system. When you have an external TAD on the same telephone line as the fax machine, the TAD answers all calls.
2 - 8 LOCATION AND CONNECTIONS Connections The external TAD must be plugged into the back of the fax machine, into the jack labeled EXT. Your fax machine cannot work properly if you plug the TAD into a wall jack. 1 Plug the telephone line cord from the wall jack into the left side of the fax machine, in the jack labeled LINE.
ON-SCREEN PROGRAMMING 3 - 1 3 3 On-Screen Programming User-Friendly Programming We have designed your fax machine with on-screen programming and a Help key. User-friendly programming helps you take full advantage of all the functions your fax machine has to offer.
3 - 2 ON-SCREEN PROGRAMMING Function Selection Table If you have a basic understanding of how to program your fax machine, you can perform most of the programming settings without the Owner’s Manual. To help you understand the function selections, options, and settings that are found in your fax programs, use the Function Selection Table below.
ON-SCREEN PROGRAMMING 3 - 3 3. SETUP SEND Function Description Factory Set More Info 1. COVERPG SETUP (FAX-222/333MC Only) Automatically sends a cover page you program. OFF 6-4, 6-5 2. COVERPAGE MSG (FAX-222/333MC Only) Program customized message for fax cover page.
3 - 4 ON-SCREEN PROGRAMMING 7. PRINT REPORTS Function Description Factory Set More Info 1. XMIT REPORT OFF 11-1 2. ACT.REPORT INTERVAL: OFF or 24H 11-1 3. AUTO DIAL Print lists and reports of activity. — 11-1 4. TEL. INDEX (Details in Chapter 11) — 11-1 5.
INITIAL SETUP 4 - 1 4 4 Initial Setup Getting Started Setting Dialing Mode (Tone/Pulse) Your fax machine comes set to accommodate tone (multi-frequency) dialing service. If you have pulse (rotary) dialing service, you need to change the dialing mode. 1 Press Function/Set , 1 , 4 .
4 - 2 INITIAL SETUP Setting Station ID You can store your name, fax number, and telephone number to be printed on all fax pages. 1 Press Function/Set , 1 , 2 . 2 Enter your fax number (up to 20 digits) and press Function/Set . 3 Enter your telephone number (up to 20 digits) and press Function/Set .
INITIAL SETUP 4 - 3 Making corrections If you entered a letter incorrectly and want to change it, press to move the cursor after the last correct letter. Then press Stop ; the letters above and to the right of the cursor are deleted. Re-enter the correct text and/or digits.
4 - 4 INITIAL SETUP Setting Beeper Volume You can set the beeper to LOW, HIGH or OFF. The default setting is LOW . When the beeper is set to LOW or HIGH, the fax machine beeps every time you press a key or make an error, and at the end of fax sending or receiving.
INITIAL SETUP 4 - 5 Key Lock System This feature allows you to prevent unauthorised access to the fax machine. When switched ON, Key Lock System prohibits most functions. The following functions listed are available while Key Lock System is switched ON.
4 - 6 INITIAL SETUP Changing the Key Lock System Password 1 Press Function/Set , 0 , 2 . 2 Press or to choose SET PASSWORD. 3 Press Function/Set . The screen prompts you to enter the old password. 4 Enter the current password. 5 Press Function/Set . The screen prompts you to enter the new password.
INITIAL SETUP 4 - 7 Switching OFF Key Lock System 1 When Key Lock System is switched ON, press Function/Set . The screen prompts you to enter the password, followed by Function/Set . 2 Enter a 4-digit password and press Function/Set . The screen displays ACCEPTED, then after 2 seconds the display reverts to normal.
5 - 1 SETUP RECEIVE 5 5 Setup Receive Basic Receiving Operations Select Answer Mode MANUAL —You must answer all calls yourself. If you hear fax tones, press Start to begin receiving the fax, then hang up. You can use this mode with Distinctive Ringing.
SETUP RECEIVE 5 - 2 MSG CTR (For FAX-333MC only)—The fax machine provides you with a built-in digital Message Center for fax and voice. When you set the machine to answer calls, it will record up to 15 minutes of messages. For more information about Message Center (MSG CTR) operation, please see Chapter 9.
5 - 3 SETUP RECEIVE The options on the FAX-333MC are: Or, if Message Center Mode is ON, it overrides your Answer Mode Setting, so the display shows: 2 Continue to press Mode until your new selection appears. After 2 seconds, the screen returns to the date and time display, along with your new Answer Mode setting.
SETUP RECEIVE 5 - 4 Setting F/T Ring Time You need to determine how long the fax machine will notify you with its special F/T pseudo-ring when you have a voice call.
5 - 5 SETUP RECEIVE Easy Receive When you use this feature, you don’t have to press Start when you answer a fax call and hear calling beeps. Just hold the handset and wait a few seconds.
SETUP RECEIVE 5 - 6 Advanced Receiving Operations Operation from External or Extension Telephone If you answer a fax call on an extension phone or on an external phone in the EXT. jack, you can make your fax machine take over by using the Fax Receive Code.
5 - 7 SETUP RECEIVE Changing Remote Codes Remote Codes might not work with some telephone systems. The preset Fax Receive Code is 5 1 . The preset Telephone Answer Code is # 5 1 . 1 Press Function/Set , 2 , 4 . 2 Press or to select ON (or OFF) and press Function/Set .
SETUP RECEIVE 5 - 8 Setting Up Polling Receive Polling Receive is when you call another fax machine to receive a fax from it. 1 Press Function/Set , 2 , 5 . The screen displays: 2 Press or to choose ON. 3 Press Function/Set . The screen prompts you to enter the fax number you want to poll, and then to press Start .
5 - 9 SETUP RECEIVE Setting Up Sequential Polling Receive (For FAX-333MC Only) Your fax machine can request documents from several fax units in a single operation. Afterward, a Sequential Polling Report will be printed. 1 Press Function/Set , 2 , 5 . The screen displays: 2 Press or to select Polling ON.
SETUP SEND 6 - 1 6 6 Setup Send Automatic Document Feeder (ADF) ■ Originals must be between 5.8 and 8.5 inches (148 and 216 mm) wide, and 5.9 and 23.7 (150 and 600 mm) inches long. Your fax machine can only scan an image 8.2 inches (208 mm) wide, regardless the paper width.
6 - 2 SETUP SEND Manual Transmission Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax. 1 Place the original face down in the ADF. 2 Pick up the handset and listen for a dial tone — OR —press Hook or Speaker Phone and listen for a dial tone.
SETUP SEND 6 - 3 5 Press 1 to select additional settings. The display returns to the SETUP SEND menu— OR —Press 2 if you are finished choosing settings and go to Step 6.
6 - 4 SETUP SEND Cover Page for Next Fax Only (For FAX-222/333MC Only) Make sure the Station ID is set up (See Setting Station ID , page 4-2.). This feature does not work without the Station ID. You can set the fax to send a cover page with a particular original.
SETUP SEND 6 - 5 4 If you selected ON, you must select a comment. Press or to view possible selections. (You can select your custom comment.) 5 Press Function/Set when the screen displays your selection. The screen displays: 6 Press 1 if you want to select additional settings.
6 - 6 SETUP SEND Composing Your Own Comments (For FAX-222/333MC Only) 1 Press Function/Set , 3 , 2 . The screen displays: COVERPAGE MSG. 2 Press or to choose position 5 or 6 for your customized comment. 3 Press Function/Set . 4 Use the dial pad to enter your customized comment (up to 27 characters).
SETUP SEND 6 - 7 Advanced Sending Operations Overseas Mode If you have difficulty sending a fax overseas, use the Overseas mode. After you send a fax using this feature, the feature turns itself off. 1 Place the original face down in the ADF. 2 Press Function/Set , 3 , 5 .
6 - 8 SETUP SEND 8 Enter the fax number. 9 Press Start . 10 If you’ve set Call Reservation to ON, pick up your handset if the fax machine rings. Print Sample Call Back Message (For FAX-222/333MC Only) 1 Press Function/Set , 3 , 6 . 2 Press or to select PRINT SAMPLE?.
SETUP SEND 6 - 9 Next-Fax Reservation (For FAX-222/333MC Only) Even if your fax machine is receiving another fax, you can set your machine to send your fax next. This way, you don’t have to wait for it to finish sending or receiving the other fax. You can dial this fax call manually, or by using Redial, One Touch, Speed Dial, or Chain dialing.
6 - 10 SETUP SEND Setting Up for Polled Transmit Polled Transmit is when you set up your fax machine to wait with an original so another fax machine can retrieve it. 1 Place the document to be retrieved face down in the ADF. 2 Press Function/Set , 3 , 8 .
SETUP SEND 6 - 11 Interrupting Delayed Fax and Polled Transmit Jobs You can send a fax or make a copy now, even if you have the fax machine set to send a fax later, or if you have it set to be polled. However, you cannot use automatic redial or the function mode.
7 - 1 AUTO DIAL NUMBERS AND DIALING OPTIONS 7 7 Auto Dial Numbers and Dialing Options Storing Numbers for Easy Dialing You can set up your fax machine to do three types of easy dialing: One Touch, Speed Dial, and Groups for Broadcasting of faxes (For Fax-333MC only).
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 2 5 Press or to select the type of number and press Function/Set . 6 Press or to select if you set ANTI JUNK to ON (OFF) and press Function/Set . 7 Press to Step 2 to store another One Touch number— OR —Press Stop to exit.
7 - 3 AUTO DIAL NUMBERS AND DIALING OPTIONS 3 Enter the number (up to 20 digits) and press Function/Set . 4 Use the dial pad to enter the name or company (up to 15 characters) and press Function/Set — OR —Press Function/Set to store the number without a name.
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 4 3 Use the dial pad to identify the Group with a number and press Function/Set . (For example, press 1 for Group 1.) 4 To include One Touch or Speed Dial numbers in the Group, enter them as if you were dialing.
7 - 5 AUTO DIAL NUMBERS AND DIALING OPTIONS One Touch Dialing 1 Pick up the handset— OR —Press Hook or Speaker Phone . (See Storing One Touch Dial Numbers/Storing Junk Fax/Call Numbers , page 7-1.) 2 When you hear a dial tone, press the One Touch key of the location you want to call.
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 6 Search You can search for names you have stored in One Touch and Speed Dial memories. Names are shown alphabetically. (See Storing One Touch Dial Numbers/Storing Junk Fax/Call Numbers , page 7-1 and Storing Speed Dial Numbers/Storing Junk Fax/Call Numbers , page 7-2.
7 - 7 AUTO DIAL NUMBERS AND DIALING OPTIONS Pause Press Redial/Pause to insert a pause between numbers. Each key press adds a 3.5 second delay. Hold 1 Press Hold to put a call on Hold. 2 You can put down the handset without disconnecting the call. 3 Pick up the fax machine handset— OR —Press Speaker Phone to release the call from Hold.
TELEPHONE SERVICES 8 - 1 8 8 Telephone Services Custom Features Your fax machine supports the Distinctive Ring and Caller ID telephone services offered by some telephone companies.
8 - 2 TELEPHONE SERVICES Setting the Distinctive Ring 1 If you have Voice Mail from the Telephone Company, you must disconnect it now (temporarily). 2 Disconnect the fax machine from any external telephone answering device (TAD). 3 Set the fax machine to MANUAL mode.
TELEPHONE SERVICES 8 - 3 Printing the Caller ID Log 1 Press Hold . 2 To print the Caller ID Log, press Start . Viewing the Caller ID Log 1 Press Hold .
8 - 4 TELEPHONE SERVICES Registering a Caller ID Number You can set up a caller in the Caller ID Log as a One Touch or Speed Dial number. 1 Press Hold . 2 After 2 seconds, press or to scroll through the Log and when you see a caller you want to register, press Function/Set .
MESSAGE CENTER (FOR FAX-333MC ONLY) 9 - 1 9 9 Message Center (For FAX-333MC Only) Message Center Mode Message Center Mode allows you to store incoming fax and voice messages in a flexible memory. The memory stores 15 minutes of voice messages, or up to 20 pages of fax memory.
9 - 2 MESSAGE CENTER (FOR FAX-333MC ONLY) Setting Up the Message Center You must set up the Message Center in the following order: 1 Setting Message Storage. (See Setting Message Storage , page 9-2.) 2 Record Message Center Outgoing Message (MSG CTR OGM).
MESSAGE CENTER (FOR FAX-333MC ONLY) 9 - 3 Listening to Outgoing Message (OGM) 1 Press Function/Set , 8 , 3 . 2 Press or to select MSG CTR OGM? (or F/T OGM or PAGING OGM) and press Function/Set . 3 Press or to select PLAY OGM? and press Function/Set . Adjust volume by pressing Volume or .
9 - 4 MESSAGE CENTER (FOR FAX-333MC ONLY) Playing Voice Messages Follow the steps below to listen to voice messages. 1 Press Play/Record . Adjust the Volume by pressing or . All messages are played in the order they were recorded. The display shows the number of the current message, and the total number of messages.
MESSAGE CENTER (FOR FAX-333MC ONLY) 9 - 5 To erase voice messages individually 1 Press Play/Record . The fax machine sounds a two-second beep and begins message playback.
9 - 6 MESSAGE CENTER (FOR FAX-333MC ONLY) ICM Recording Monitor This feature lets you turn the speaker volume for voice messages ON or OFF. When you turn the monitor OFF, you will not hear messages as they come in. 1 Press Function/Set , 8 , 5 . 2 Use or to select OFF (or ON) and press Function/Set .
MESSAGE CENTER (FOR FAX-333MC ONLY) 9 - 7 Recording the Paging Outgoing Message (OGM) Before paging can work, you should first record the Paging OGM. 1 Press Function/Set , 8 , 3 . The screen prompts you to choose an OGM. 2 Press or to reach PAGING MSG.
9 - 8 MESSAGE CENTER (FOR FAX-333MC ONLY) Remote Retrieval Using Remote Retrieval Access Code 1 Dial your fax number from a touch tone phone. 2 When your fax machine answers, immediately enter your Remote Retrieval Access Code.
MESSAGE CENTER (FOR FAX-333MC ONLY) 9 - 9 Remote Commands Follow the commands below to access features remotely. When you call the fax machine and enter your Remote Retrieval Access Code (159 ), the system will signal you with two short beeps to enter a remote command.
9 - 10 MESSAGE CENTER (FOR FAX-333MC ONLY) 95 Changing Fax Forwarding/ Paging Setting If you hear one long beep, the change is accepted. If you hear three short beeps, you cannot change it because the conditions have not been met (Example: registering paging number).
MESSAGE CENTER (FOR FAX-333MC ONLY) 9 - 11 Retrieving Memory Status List You can retrieve the Memory Status List from a remote fax machine to see if you have any fax messages. 1 Dial your fax number. 2 When you hear the beep, immediately enter your Remote Retrieval Access Code ( 1 5 9 ).
9 - 12 MESSAGE CENTER (FOR FAX-333MC ONLY) Changing Fax Forwarding Number You can change the default setting of your fax forwarding number from a remote fax machine. 1 Dial your fax number. 2 When you hear the beep, immediately enter your Remote Retrieval Access Code ( 1 5 9 ).
MAKING COPIES 10 - 1 10 10 Making Copies Copy Functions To make a single copy that is not reduced, enlarged or sorted, you only have to press one key. The default resolution for a single copy is Super Fine. Set the resolution to PHOTO for photographs.
10 - 2 MAKING COPIES If you are making multiple copies and get a OUT OF MEMORY message while you are scanning the first page, press Stop to cancel the job.
PRINTING REPORTS 11 - 1 11 11 Printing Reports Fax machine Settings and Activity You can print the following lists and reports: Choose to print a Transmission Verification Report after each fax you send. Activity Report lists information about the last 15 (FAX-202/222) or 30 (FAX-333MC) incoming and outgoing faxes.
11 - 2 PRINTING REPORTS Transmission Verification (Xmit) Report You can use the Xmit Report as proof that you sent a fax. This report lists the name or fax number of the receiving party, the time and date of transmission, and whether the transmission was successful.
IMPORTANT INFORMATION 12 - 1 12 12 Important Information Important Safety Instructions 1 Read all of these instructions and save them for future use. 2 Follow all warnings and instructions marked on the product. 3 Unplug this product from the wall outlet before cleaning.
12 - 2 IMPORTANT INFORMATION 14 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points and/or other risks, and may void your warranty. Please refer all servicing to our Authorized Service Personal.
TROUBLESHOOTING AND MAINTENANCE 13 - 1 13 13 Troubleshooting and Maintenance Troubleshooting Error Messages You may occasionally encounter a difficulty with your fax machine or telephone line. If this happens, your fax machine often identifies the problem and displays an error message.
13 - 2 TROUBLESHOOTING AND MAINTENANCE 6 Plug in the power cord. 7 Load the fax paper again, and push the blue release lever down. Close the cover. The other party has disconnected during a call or fax. Try calling the other party. The documents were not inserted or fed properly, or were too long or too short.
TROUBLESHOOTING AND MAINTENANCE 13 - 3 The recording head has overheated. Unplug the machine and wait 30 minutes for it to cool. Try cleaning the white bar and the glass under the bar with isopropyl alcohol. If you still get a scanner error, contact Brother Dealer for service.
13 - 4 TROUBLESHOOTING AND MAINTENANCE If You Are Having Difficulty with Your Fax Machine If you think there is a problem with your fax machine, make a copy first. If the copy looks good, the problem is probably not your fax machine. Check the difficulties below and follow the troubleshooting tips.
TROUBLESHOOTING AND MAINTENANCE 13 - 5 Sending Faxes Poor Transmitting Quality Try changing your resolution to FINE or SUPERFINE (see Resolution , page 6-6 ). Try cleaning the white pressure bar of the scanner and the glass under the bar (see page 13-1).
13 - 6 TROUBLESHOOTING AND MAINTENANCE Transmission Verification Report Prints “Result: NG” There is probably temporary noise or static on the phone line. Try sending the fax again. If the problem continues, call the Telephone Company to check your phone line.
MULTI-FUNCTION LINK ® (OPTION) 14 - 1 14 14 Multi-Function Link ® (option) You can purchase the optional Multi-Function Link ® package. Multi-Function Link ® turns your fax machine into a multifun.
S - 1 SPECIFICATIONS Specifications * “Pages” refers to the ITU-T #1 chart (in Out of Paper Reception in ECM mode). Specifications are subject to change without prior notice.
SPECIFICATIONS S - 2 Communication Source Public switched telephone network Operating Environment 41 - 95° F (5° - 35°C) Power Source 220~240V AC 50/60Hz Power Consumption Standby: under 5 watts — Peak: under 110 watts Dimensions 11.8 x 9.4 x 5.4 (inches)/ 299 x 240 x 137 (mm) Weight 6.
G - 1 GLOSSARY Glossary Activity Report Lists information about the last 15 (FAX-202, FAX-222) or 30 (FAX-333MC) incoming and outgoing faxes. TX means Transmit. RX means Receive. ADF (Automatic original Feed) Refers to the number of pages that can be placed in the original feeder and fed one at a time automatically.
GLOSSARY G - 2 gray scale The shades of gray available for copying and faxing photographs. group number A combination of One Touch and/or Speed Dial numbers that are stored on a One Touch key for Broadcasting. Interrupt Temporarily puts a waiting job on hold while you perform another operation.
G - 3 GLOSSARY Rotary A form of dialing on a telephone line. scanning The process of sending an electronic image of a paper document into your computer. Search An electronic, alphabetical listing of stored One Touch, Speed Dial and Group numbers. Speed dial A preprogrammed number for easy dialing.
INDEX I - 1 Index A ACTIVITY REPORT ......................... 11-2 Alternating Displays ............................. 3-1 Answer Mode ................................ 5-1, 5-2 Answering Machine .............................. 2-7 AUTO DIAL REPORT .....
I - 2 INDEX I ICM Recording Monitor .......................9-6 Inserting Spaces ....................................4-2 International Calls ................................. 6-7 Interrupting .........................................6-11 M Manual Dialing .
INDEX I - 3 Troubleshooting .................................. 13-1 U USER SETTINGS REPORT .............. 11-1 V Verification (Xmit) Report ...........
I - 4 INDEX.
REMOTE RETRIEVAL ACCESS CARD R - 1 Using Remote Retrieval Access Code (For FAX-333MC Only) If you plan to retrieve voice or fax messages while away from your fax machine, carrying the Remote Retrieval Access Card printed below will serve as a convenient reminder of the retrieval procedures.
R - 2 REMOTE RETRIEVAL ACCESS CARD Retrieve all faxes press , then enter the number of remote fax machine, and then . After the beep, hang up and wait. Erase all fax messages press . Check Receiving Status Press . then for Fax message , press . Voice message , press .
AS.GU LE5169040 1 Printed in Malaysia ®.
Ein wichtiger Punkt beim Kauf des Geräts Brother FAX-222 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Brother FAX-222 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Brother FAX-222 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Brother FAX-222 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Brother FAX-222 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Brother FAX-222 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Brother FAX-222 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Brother FAX-222. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Brother FAX-222 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
