DE
Ring logo
Offizielle Bedienungsanleitung

Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0)

4 Seiten·175 KB·Hub·PDF·EN
Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0)
Inhaltsverzeichnis 8 Abschnitte Base Station Z-Wave TM Technical Manual · Notes: · Ring Base station – Learn Mode · Removing a Base station to a Z-Wave Network · … AnzeigenAusblenden
Page 1 of the Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) user manual — Notes:
Seite 1 · Zum Vergrößern klicken
Seite 1

Base Station Z-Wave TM Technical Manual

Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) — Base Station Z-Wave TM Technical Manual diagram (page 1)
Abb. 1 · Base Station Z-Wave TM Technical Manual

Notes:

  • This product can be operated in any Z-Wave TM network with other Z-Wave certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
Page 2 of the Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) user manual — Ring Base station – Learn Mode
Seite 2 · Zum Vergrößern klicken
Seite 2

Ring Base station – Learn Mode

Adding Base station to a Z-WaveTM Network

Ring Base station can be added via classic inclusion mode –

Learn Mode Instructions / Classic Inclusion Steps:

1. Start inclusion mode on the primary controller
2. From the application’s UI, navigate to controller’s device setting screen -> select Advance options -> Select Z-Wave from “Protocol Adapters” and Select “Learn Mode” – DSK will be displayed (refer to the picture below) 3. Select “Begin Learn Mode” in the UI 4. When the inclusion process in complete, the LED on the base station will be solid blue

Joining another Z-Wave network via learn mode is available only when the base station is not already paired to any other devices

Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) — Ring Base station – Learn Mode diagram (page 2)
Abb. 2 · Ring Base station – Learn Mode
Page 3 of the Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) user manual — Ring Base Station – Reset
Seite 3 · Zum Vergrößern klicken
Seite 3

Removing a Base station to a Z-Wave Network

1. Start exclusion mode on the primary controller
2. From the application’s UI, navigate to controller’s device setting screen -> select Advance options -> Select Z-Wave from “Protocol Adapters” and Select “Learn Mode” – DSK will be displayed
3. Select “Begin Learn Mode” in the UI 4. When the exclusion process in complete, the LED on the base station will be solid blue

Ring Base station – Lifeline

This base station has Group 1 is the “Lifeline” group, which can hold one devices. Base station will send device reset locally notification to this group.

Ring Base station – Replication

Controller replication can be initiated by adding another controller into the network

Ring Base Station – Reset

1. Launch Ring app (iOS or Android)
2. Navigate to Base Station Setting: Devices à Alarm Base Station à Tap on gear icon located on top right-hand corner
3. Navigate to Advanced Options à Z-Wave 4. Tap “Reset Z-Wave Network” and Select “Reset”

Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

Exclusion Instructions · Association · Factory Default Instructions

Page 4 of the Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) user manual — Adding a Z-Wave Sensor to a Z-Wave Network
Seite 4 · Zum Vergrößern klicken
Seite 4

Adding a Z-Wave Sensor to a Z-Wave Network

Z-Wave Sensor (for example – Ring Motion Sensor) can be added via SmartStart or via classic inclusion mode – SmartStart Inclusion Steps: 1. Initiate add device flow in the Ring Alarm mobile application – Follow the guided add flow instructions provided in the application 2. Scan the QR code found on the package of the device or the QR code found on the back of the device Classic Inclusion Steps: 1. Initiate add device flow in the Ring Alarm mobile application – Follow the guided add flow instructions provided in the application 2. Select add manually 3. Select Z-Wave and select Add 4. Enter learn mode on the joining device

Frage zu Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0)

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Ring Alarm Hub Wi-Fi Base Station (4HB1S70EN0) PDF-Anleitung

4 Seiten·175 KB·Hub·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…