DE
Linksys logo
Offizielle Bedienungsanleitung

Linksys Velop

384 Seiten·2.6 MB·Router·PDF·ENITJA
Linksys Velop
Inhaltsverzeichnis 2 Abschnitte EN - User Guide · ES - Guía del usuario AnzeigenAusblenden
Page 1 of the Linksys Velop user manual — Velop
Seite 1 · Zum Vergrößern klicken
Seite 1

User Guide

Linksys Velop — User Guide diagram (page 1)
Abb. 1 · User Guide

Velop

Page 2 of the Linksys Velop user manual — Table of contents
Seite 2 · Zum Vergrößern klicken
Seite 2

Table of contents

Page 3 of the Linksys Velop user manual — Product Overview
Seite 3 · Zum Vergrößern klicken
Seite 3

Product Overview

Front/top view

Linksys Velop — Product Overview diagram (page 3)
Abb. 2 · Product Overview

The light on the top of your node gives you information about the node’s operation.

Blinking blue Node is starting up

Solid blue Node is working great

Blinking purple Node is paired with phone for setup

Solid purple Node is ready for setup

Blinking red Node has lost connection to primary node

Solid red Node has lost connection to the internet

Solid yellow Node is too far from another node connected to your Velop system

Light description Status

Page 4 of the Linksys Velop user manual — Bottom view
Seite 4 · Zum Vergrößern klicken
Seite 4

Bottom view

Linksys Velop — Bottom view diagram (page 4)
Abb. 3 · Bottom view
1. Reset button Press and hold until the light on top of the node turns red, fades and flashes bright red again to reset the router to its factory defaults.
2. Ethernet ports Connect Ethernet cables to these Gigabit Ethernet (10/100/1000) ports and to other wired devices on your network. If you have more than one node in your Velop system, use one of these ports to connect to your modem or modem router.
3. Power switch Press | (on) to power on the node.
4. Power port Connect the included AC power adapter to this port.
Page 5 of the Linksys Velop user manual — Help
Seite 5 · Zum Vergrößern klicken
Seite 5

Help

Where to find more help

  • <a href="http://Linksys.com/support/Velop" rel="nofollow noopener" target="_blank">Linksys.com/support/Velop</a>
  • Linksys app help (launch the app and click Help in the main navigation menu)
Linksys Velop — Help diagram (page 5)
Abb. 4 · Help
Page 6 of the Linksys Velop user manual — Set Up
Seite 6 · Zum Vergrößern klicken
Seite 6

Set Up

Download the Linksys app. You need this app to set up Velop.

Go to the app store for your device and search for Linksys.

Install the app, open it and follow the instructions.

Linksys Velop — Set Up diagram (page 6)
Abb. 5 · Set Up

During setup you will create a Linksys Smart Wi-Fi account so you can use the app to view or change your Velop system settings from anywhere you have an internet connection.

Among the many things you can do with Linksys Smart Wi-Fi:

  • Change your Wi-Fi name and password
  • Set up guest access
  • Connect devices to Wi-Fi with WPS
  • Block internet with parental controls
  • Test your internet connection speed
Page 7 of the Linksys Velop user manual — What you’ll need
Seite 7 · Zum Vergrößern klicken
Seite 7

Other than plugging in the power and the ethernet cables, the app-based setup process does the work for you. Once connected, use the app to personalize your Wi-Fi by giving it a name and password. You also can give nodes names based on where they are so you can identify them in the rare case where things need attention.

What you’ll need

Linksys Velop — What you’ll need diagram (page 7)
Abb. 6 · What you’ll need
Page 8 of the Linksys Velop user manual — EN - User Guide
Seite 8 · Zum Vergrößern klicken
Seite 8

Find a power source near to your modem or modem router. Connect to your first node.

Linksys Velop — EN - User Guide diagram (page 8)
Abb. 7 · EN - User Guide
Page 9 of the Linksys Velop user manual — EN - User Guide
Seite 9 · Zum Vergrößern klicken
Seite 9

If you have more than one node, they can be set up anywhere within range of another working node. Only one node has to be wired to the modem or modem router. Don’t worry, the app will help you place your nodes.

Linksys Velop — EN - User Guide diagram (page 9)
Abb. 8 · EN - User Guide
Page 10 of the Linksys Velop user manual — EN - User Guide
Seite 10 · Zum Vergrößern klicken
Seite 10

Print this page, then record your Wi-Fi and account settings in the table as a reference. Store your

Linksys Smart Wi- Fi Username

Linksys Smart Wi- Fi Password

Show 5 more labels / short text on this page
Wi-Fi Name · Wi-Fi Password · Admin Password · Guest Network Name · Guest Network Password
Page 11 of the Linksys Velop user manual — Log in to your Linksys Smart Wi-Fi cloud account
Seite 11 · Zum Vergrößern klicken
Seite 11

Velop System Settings

Using your Linksys app, you can view or change Velop system settings to make your Wi-Fi more secure or to work better with a device or game. You can access settings from anywhere in the world if you have an internet connection, but you can also access your Velop system directly from your home network if you are not online.

Log in to your Linksys Smart Wi-Fi cloud account

1. Open the Linksys app.
Linksys Velop — Log in to your Linksys Smart Wi-Fi cloud account diagram (page 11)
Abb. 9 · Log in to your Linksys Smart Wi-Fi cloud account
2. Enter the email address you used when creating your account.
3. Enter your account password.
4. Tap Log in .
Page 12 of the Linksys Velop user manual — Dashboard
Seite 12 · Zum Vergrößern klicken
Seite 12

Dashboard

Dashboard is a snapshot of your Wi-Fi. See how many devices are connected to your Velop system. Share Wi-Fi password and allow guest access to your Wi-Fi. Dashboard also shows you if any devices have parental controls on them or have been prioritized for Wi-Fi access.

Linksys Velop — Dashboard diagram (page 12)
Abb. 10 · Dashboard
Linksys Velop — Dashboard diagram (page 12)
Abb. 11 · Dashboard
Page 13 of the Linksys Velop user manual — Devices
Seite 13 · Zum Vergrößern klicken
Seite 13

Devices

View and change details for all devices connected to your Wi-Fi. You can view devices on your main network and your guest network, or display information about each device.

Linksys Velop — Devices diagram (page 13)
Abb. 12 · Devices
Linksys Velop — Devices diagram (page 13)
Abb. 13 · Devices
Page 14 of the Linksys Velop user manual — EN - User Guide
Seite 14 · Zum Vergrößern klicken
Seite 14

To view or change device details

From the Devices screen you can edit device names and change the device icons. You also can prioritize devices, set parental controls, and see Wi-Fi details. Tap on any device to see details.

Linksys Velop — EN - User Guide diagram (page 14)
Abb. 14 · EN - User Guide
Page 15 of the Linksys Velop user manual — Wi-Fi Settings
Seite 15 · Zum Vergrößern klicken
Seite 15

Wi-Fi Settings

View or change your Wi-Fi name and password and connect devices using Wi-Fi Protected Setup™.

Linksys Velop — Wi-Fi Settings diagram (page 15)
Abb. 15 · Wi-Fi Settings
Linksys Velop — Wi-Fi Settings diagram (page 15)
Abb. 16 · Wi-Fi Settings
Page 16 of the Linksys Velop user manual — EN - User Guide
Seite 16 · Zum Vergrößern klicken
Seite 16

Advanced users can change the default security type and Wi-Fi mode. Do not change these unless you have a lot of experience with Wi-Fi networks. Channel Finder will search for the most-open Wi-Fi channels in your area to ensure you get the best performance from your Velop system. If you have more than one node in your Velop system, Channel Finder will find the best channel for each node.

Linksys Velop — EN - User Guide diagram (page 16)
Abb. 17 · EN - User Guide
Linksys Velop — EN - User Guide diagram (page 16)
Abb. 18 · EN - User Guide

Advanced Settings

Page 17 of the Linksys Velop user manual — EN - User Guide
Seite 17 · Zum Vergrößern klicken
Seite 17

Connect a Device with WPS

Wi-Fi Protected Setup allows you to easily connect wireless devices to your Wi-Fi without manually entering security settings.

Linksys Velop — EN - User Guide diagram (page 17)
Abb. 19 · EN - User Guide
Page 18 of the Linksys Velop user manual — Guest Access
Seite 18 · Zum Vergrößern klicken
Seite 18

Guest Access

Use your Guest Access to allow guests to get online while restricting their access to other resources connected to your Wi-Fi. Send the password by text message or email.

Linksys Velop — Guest Access diagram (page 18)
Abb. 20 · Guest Access
Linksys Velop — Guest Access diagram (page 18)
Abb. 21 · Guest Access
Page 19 of the Linksys Velop user manual — Speed Test
Seite 19 · Zum Vergrößern klicken
Seite 19

Speed Test

Run a speed test to make sure you are getting the speeds you are paying for. Speed test also helps in Device Prioritization because results determine how Wi-Fi is distributed to the prioritized devices.

Linksys Velop — Speed Test diagram (page 19)
Abb. 22 · Speed Test
Linksys Velop — Speed Test diagram (page 19)
Abb. 23 · Speed Test
  • Download speed is the rate at which internet content is transferred to your Velop system.
  • Upload speed is the rate at which you can upload content to the internet.
Page 20 of the Linksys Velop user manual — Parental Controls
Seite 20 · Zum Vergrößern klicken
Seite 20

Parental Controls

Parental controls allow you to control when your kids are online and what they’re doing there. Block internet to specific devices, or block specific websites.

Linksys Velop — Parental Controls diagram (page 20)
Abb. 24 · Parental Controls
Linksys Velop — Parental Controls diagram (page 20)
Abb. 25 · Parental Controls
Page 21 of the Linksys Velop user manual — Device Prioritization
Seite 21 · Zum Vergrößern klicken
Seite 21

Device Prioritization

Choose up to three devices for priority usage of your internet connection. Those devices -- wired and/or wireless -- always will have the best access when connected. Velop runs a speed test to determine how to best distribute Wi-Fi to prioritized devices. Other devices will share the leftover capacity. Prioritized devices appear on Dashboard.

Linksys Velop — Device Prioritization diagram (page 21)
Abb. 26 · Device Prioritization
Linksys Velop — Device Prioritization diagram (page 21)
Abb. 27 · Device Prioritization
Page 22 of the Linksys Velop user manual — Notifications
Seite 22 · Zum Vergrößern klicken
Seite 22

Notifications

Velop can notify you when nodes in your system go offline. You can also ask Velop to alert you when a node is connected with an Ethernet cable to another node and is ready for setup. You have to turn on notifications in your mobile device settings to allow Velop to notify you.

Linksys Velop — Notifications diagram (page 22)
Abb. 28 · Notifications
Linksys Velop — Notifications diagram (page 22)
Abb. 29 · Notifications
Page 23 of the Linksys Velop user manual — Velop Administration
Seite 23 · Zum Vergrößern klicken
Seite 23

Velop Administration

Use the Velop Administration screen to change the admin password and hint, and check various identifiers (model number, serial number, and IP details) for all nodes in your Wi-Fi.

Linksys Velop — Velop Administration diagram (page 23)
Abb. 30 · Velop Administration
Linksys Velop — Velop Administration diagram (page 23)
Abb. 31 · Velop Administration

Opt in to automatically report crashes to Linksys and contribute to improving the Wi-Fi experience. You also can manually report specific issues to Linksys.

Page 24 of the Linksys Velop user manual — EN - User Guide
Seite 24 · Zum Vergrößern klicken
Seite 24

The following information will be sent with your description of the issue:

  • App version
  • Login Type (cloud: show email address associated, local: display "Velop admin")
  • Device model
  • WAN Connection type (display Wi-Fi or Ethernet)
  • Device OS version
  • Time: date (mo/day/year, time, time zone)

There is also a button on the Velop Administration screen to restart your Velop if other troubleshooting efforts don’t work out.

Page 25 of the Linksys Velop user manual — Advanced Settings
Seite 25 · Zum Vergrößern klicken
Seite 25

Advanced Settings

You can choose how your Velop system connects to the internet. The default is Automatic Configuration – DHCP. Other connection types depend on your internet service provider or how you plan to use your Velop system. Advanced users can use Additional Settings to clone MAC addresses and set MTU (maximum transmission unit).

Linksys Velop — Advanced Settings diagram (page 25)
Abb. 32 · Advanced Settings
Linksys Velop — Advanced Settings diagram (page 25)
Abb. 33 · Advanced Settings

Internet Settings

Page 26 of the Linksys Velop user manual — EN - User Guide
Seite 26 · Zum Vergrößern klicken
Seite 26

Port forwarding for a single port, multiple ports or a range of ports sends traffic inbound on a specific port or ports to a specific device or port on your Wi-Fi. In port range triggering, Velop watches outgoing data for specific port numbers. Velop remembers the IP address of the device that requests the data so that when the requested data returns, it is routed back to the proper device.

Linksys Velop — EN - User Guide diagram (page 26)
Abb. 34 · EN - User Guide
Linksys Velop — EN - User Guide diagram (page 26)
Abb. 35 · EN - User Guide

Port Settings

Page 27 of the Linksys Velop user manual — EN - User Guide
Seite 27 · Zum Vergrößern klicken
Seite 27

Every network device has a unique 12-digit MAC (media access control) address. You can create a list of MAC addresses, and then allow or deny those devices on your Wi-Fi.

Linksys Velop — EN - User Guide diagram (page 27)
Abb. 36 · EN - User Guide
Linksys Velop — EN - User Guide diagram (page 27)
Abb. 37 · EN - User Guide

Wi-Fi MAC Filters

Page 28 of the Linksys Velop user manual — My Account
Seite 28 · Zum Vergrößern klicken
Seite 28

My Account

Change your Linksys account password and opt in to receive the latest news and deals from Linksys.

Linksys Velop — My Account diagram (page 28)
Abb. 38 · My Account
Linksys Velop — My Account diagram (page 28)
Abb. 39 · My Account
Page 29 of the Linksys Velop user manual — Help
Seite 29 · Zum Vergrößern klicken
Seite 29

Help

Having trouble with the app? Just need a little more information about a feature? Tap Help for an explanation.

Page 30 of the Linksys Velop user manual — Feedback
Seite 30 · Zum Vergrößern klicken
Seite 30

Feedback

Here’s your chance to tell us what you think. Rate the app at your app store, send us a suggestion, or report an issue that’s keeping you from a great experience.

Linksys Velop — Feedback diagram (page 30)
Abb. 40 · Feedback
Page 31 of the Linksys Velop user manual — Connect Directly To Velop
Seite 31 · Zum Vergrößern klicken
Seite 31

Connect Directly To Velop

If you are not connected to the internet you still can access your Velop system. Connect to your Wi-Fi name, launch the Linksys app and tap Log in with Admin Password toward the bottom of the screen. You will not be able to access your Linksys Wi-Fi account when not online.

Linksys Velop — Connect Directly To Velop diagram (page 31)
Abb. 41 · Connect Directly To Velop
Page 32 of the Linksys Velop user manual — EN - User Guide
Seite 32 · Zum Vergrößern klicken
Seite 32

We created a secure Velop admin password during setup. To change it, tap Velop Administration and Change Admin Password and Hint.

Linksys Velop — EN - User Guide diagram (page 32)
Abb. 42 · EN - User Guide

To keep your Velop system secure, we'll let you know if someone changes the admin password.

Linksys Velop — EN - User Guide diagram (page 32)
Abb. 43 · EN - User Guide

Velop admin password

Page 33 of the Linksys Velop user manual — How to restore factory defaults
Seite 33 · Zum Vergrößern klicken
Seite 33

How to restore factory defaults

You should never need to factory reset your Velop a very disruptive process. A factory reset restores your Velop system to the state it was when you took it out of its box, requiring you to go through the setup process again. All settings you have customized in setup and since -- things such as Wi-Fi name, passwords, security type -- will be erased. All wireless devices will disconnect from your Wi-Fi.

To reset Velop:

  • With your node connected to power and turned on, press and hold the Reset button on the bottom. The light on top of the node will turn red and fade in pulses. Do not release the button until the light goes out and then turns bright red.
Linksys Velop — How to restore factory defaults diagram (page 33)
Abb. 44 · How to restore factory defaults
Page 34 of the Linksys Velop user manual — Environmental
Seite 34 · Zum Vergrößern klicken
Seite 34

Specifications

Linksys Velop

Switch Port Speed 10/100/1000 Mbps

Radio Frequency 2.4 GHz and 5 GHz

# of Antennas 6

LEDs One, multicolored light for power and status

Security Features WPA2-Personal, WPA2-Enterprise

Security Key Bits Up to 128-bit encryption

Environmental

Dimensions 3.07” x 3.07” x 7.28” (78 x 78 x 185mm)

Unit Weight 17 oz (485 g)

Certifications FCC, IC, CE, Wi-Fi (IEEE 802.11a/b/g/n/ac), Windows 7, Windows 8, DLNA

Operating Temp. 32° to 104° F (0 to 40° C)

Storage Temp. -4° to 140° F (-20 to 60° C)

Operating Humidity 10% to 80% relative humidity, non-condensing

Storage Humidity 5% to 90% non-condensing

For regulatory, warranty, and safety information, go to Linksys.com/support/Velop

Specifications are subject to change without notice.

Show 5 more labels / short text on this page
Model Name Velop · Model Number WHW03 · Ports Power, ethernet · Buttons Power, Reset · Power 12V, 2A
Page 35 of the Linksys Velop user manual — EN - User Guide
Seite 35 · Zum Vergrößern klicken
Seite 35

Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

Visit linksys.com/support/Velop for award-winning technical support.

BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.

© 2017 Belkin International, Inc. and/or its affiliates. All rights reserved.

Page 36 of the Linksys Velop user manual — Guía de usuario
Seite 36 · Zum Vergrößern klicken
Seite 36

Guía de usuario

Velop

Page 37 of the Linksys Velop user manual — Table of contents
Seite 37 · Zum Vergrößern klicken
Seite 37

Table of contents

Quellen

Referenzen & Links

In dieser Anleitung genannte Seiten – Hersteller, Support und Downloads.

Frage zu Linksys Velop stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Linksys Velop

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Linksys Velop PDF-Anleitung

384 Seiten·2.6 MB·Router·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…