
Quick Start Guide 快速入门指南 快速入門指南 クイックスタートガイド 퀵 스타트 가이드 Kurzanleitung Guía de inicio rápido Guide de démarrage rapide Guida di avvio rapido Snelstartgids Guia de início rápido Guia de Início Rápido Краткое руководство пользователя





Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI. Visit www.dji.com for the latest information for this product.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document.
Notwithstanding above, your statutory rights under applicable national legislation are not affected by this disclaimer.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without prior written consent of or authorization from DJI.
Always stay alert when using the DJI Smart Controller (hereinafter referred as “Smart Controller”) to control an Unmanned Aerial Vehicle (UAV). Carelessness may result in serious harm to yourself and others. Always download and read the Disclaimer and Safety Guidelines of the aircraft and the Smart Controller’s User Manual before use.

2. If the Smart Controller is powered on and has not been used for five minutes, it will sound an alert. After six minutes, it will automatically power off. Move the sticks or perform some other action to cancel the alert. 3. Ensure the antennas are unfolded and adjusted to the proper position to achieve the optimal transmission quality. 4. Contact DJI support to repair or replace the antennas if they are damaged. Damaged antennas will greatly decrease performance. 5. Link the Smart Controller and the aircraft again if you change the aircraft. 6. Ensure to power off the aircraft before the Smart Controller. 7. Fully charge the Smart Controller every three months. 8. Immediately charge the Smart Controller when its power level decreases to 0% to prevent the Smart Controller from damage due to over discharge for an extended period. Discharge the Smart Controller to a power level between 40% and 60% if stored for an extended period. 9. DO NOT cover the air vent or the air intake on the Smart Controller. Otherwise, the Smart Controller may become too hot, which could affect its performance. 10. DO NOT disassemble the Smart Controller without the assistance of a DJI authorized dealer. Always contact DJI or a DJI authorized dealer to replace the Smart Controller’s components.
The DJI Smart Controller features OCUSYNC™ 2.0 technology, capable of controlling aircraft
that support the technology, and providing a live HD view from the aircraft's camera. It can transmit image data at distances of up to 8 km and comes with a number of aircraft and gimbal controls as well as some customizable buttons.
The built-in 5.5-inch high brightness 1000 cd/m² screen has a resolution of 1920×1080 pixels, featuring an Android system with multiple functions such as Bluetooth and GNSS. It supports to connect to the Internet via Wi-Fi.
The Smart Controller has a maximum working time of 2.5 hours .


6 9 10

17 18 19


Press the power button once to check the battery level. Press and hold for two seconds or press for a few seconds to power on the Smart Controller.
It takes about two hours to fully charge the Smart Controller using the standard USB power adapter.
100~240 V USB Power Adapter
① Please refer to the Specifications for details on supported aircraft. ②The Smart Controller can reach its maximum transmission distance (FCC) in a wide open area with
TM 2 at an altitude of about 100 meters. ③ The maximum working time was tested in a lab environment and is for reference only. ④ A pair of sticks are stocked in the Sticks Storage Slot before delivery. In the illustrations used in the
no electromagnetic interference using a MAVIC
overview section, the sticks have already been mounted on the Smart Controller.
Power Outlet · USB-C Cable


Lift the antennas Remove the sticks Rotate to attach the sticks
The optimal transmission range is shown above. Ensure the antennas are facing towards the aircraft. When the angle between the antennas and the back of the Smart Controller is 80° or 180°, the connection between the Smart Controller and the aircraft can reach its optimal performance. The illustrations above show situations where the operator and aircraft are far away.

A brand new Smart Controller needs to be activated first. Activation requires an Internet connection.
Power on the Smart Controller
Select a Preferable Language
Follow the Prompts to Activate
Please check the internet connection if activation fails. If the internet connection is normal, please retry to activate the Smart Controller. Contact DJI if activation fails several times over.
When the Smart Controller is purchased together with an aircraft as a combo, it is already linked to the aircraft. If not, please follow the steps below to link the Smart Controller and the aircraft after successful activation.
Please refer to the DJI Smart Controller User Manual for more linking methods. To download the manual, please visit http://www.dji.com/dji-smart-controller

Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app displays “Ready to Go (GPS)”. Ready to Go (GPS)
Slowly push the left stick up to take off.
Slowly push the left stick down until the aircraft lands. Hold for a few seconds to stop the motors.
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, and left and right movements. The gimbal dial controls the camera’s tilt.
Turn Left Turn Right

Ocusync 2.0
Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz*
Transmitter Power (EIRP)

Protocol Bluetooth 4.2
Operation Frequency Range 2.400-2.4835 GHz
Transmitter Power (EIRP) 4 dBm (FCC); 4 dBm (CE); 4 dBm (SRRC); 4 dBm (MIC)
Battery 18650 Li-ion (5000 mAh @ 7.2 V)
Charge Type Supports USB power adapters rated 12V/2A
Supported Aircraft Models** Mavic 2 Pro; Mavic 2 Zoom
Weight Approx. 630 g
* Local regulations in some countries prohibit the use of the 5.8 GHz and 5.2 GHz frequencies and in some regions the 5.2 GHz frequency band is only allowed for indoor use. ** The Smart Controller will support more DJI aircrafts in future. Please visit the official website for the latest information.
Bluetooth · General · Model RM500

DJI 技術支援
DJI サポート
DJI 지원
Asistencia técnica de DJI
The content is subject to change. Visit www.dji.com to download the latest manual.
If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com.
DJI is a trademark of DJI. Copyright ©2018 DJI All Rights Reserved.
Designed by DJI. Printed in China.

DJI incorporates HDMITM technology. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

www.dji.com
In dieser Anleitung genannte Seiten – Hersteller, Support und Downloads.
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.