DE
Anker logo
Offizielle Bedienungsanleitung

Anker PowerConf

54 Seiten·3.5 MB·Lautsprecher·PDF·EN
Anker PowerConf
Inhaltsverzeichnis 55 Abschnitte Anker PowerConf · User Manual · A3301 51005001899 V02 · At a Glance · … AnzeigenAusblenden
Anker PowerConfp.1User Manualp.1A3301 51005001899 V02p.1At a Glancep.2EN 01p.2Connectingp.3Powering On/Offp.302 EN EN 03p.3Status LED behaviorsp.4Button Controlsp.4Chargingp.4a) Charging this productp.404 EN EN 05p.4Audio Outputp.5b) Charging an external devicep.5Soundcore Appp.506 EN EN 07p.5Specificationsp.6Auf einen Blickp.6DE 09 08 ENp.6电源指示灯状态p.7音频输出p.7使用 AUX 线缆(不提供)将外部扬声器连接至本品的 AUX 插孔。音频将通过 扬声器播放。p.7b) 为外部设备充电p.7Soundcore 应用p.778 CN CN 79p.7产品参数p.8概觀p.8规格如有变更,恕不另行通知。p.81 多功能按鈕 8 電源按鈕p.82 音量降低按鈕 9 藍牙按鈕p.83 靜音按鈕 10 藍牙 LED 燈p.85 音量增加按鈕 12 音訊輸出連接埠p.87 電源 LED 燈p.8TW 81 80 CNp.8已連線p.9a) 使用 USB 連接線連接至您的電腦。p.9b) 透過藍牙配對連接至您的電腦或行動裝置。p.9開啟/ 關閉電源p.9初次將產品開機時,它會自動進入藍牙配對模式。p.9同時按住電源按鈕 2 秒以開機。狀態指示燈將會以順時針方向亮起,然後熄滅。 如要關機,按住電源按鈕 2 秒。p.982 TW TW 83p.9電源 LED 燈行為p.10狀態指示燈行 為p.10穩定亮起白燈 電源開啟p.10指示燈熄滅 電源關閉p.10按鈕控制項p.10充電p.10a) 為產品充電p.1084 TW TW 85p.10音訊輸出p.11使用 AUX 連接線(未隨附)將外部喇叭連接至本產品的 AUX 插孔。將會透過 喇叭播放音訊。p.11b) 為外部裝置充電p.11Soundcore 應用程式p.1186 TW TW 87p.11
Page 1 of the Anker PowerConf user manual — A3301 51005001899 V02
Seite 1 · Zum Vergrößern klicken
Seite 1
Anker PowerConf — Anker PowerConf diagram (page 1)
Abb. 1 · Anker PowerConf

Anker PowerConf

User Manual

A3301 51005001899 V02

Page 2 of the Anker PowerConf user manual — EN 01
Seite 2 · Zum Vergrößern klicken
Seite 2
Anker PowerConf — At a Glance diagram (page 2)
Abb. 2 · At a Glance

At a Glance

Deutsch09 Español 17 17 Français 25 25 Italiano 33 33 Português 41 41 Pусский 49 49 日本語 57 57 한국어 65 65 简体中文 73 73 繁體中文 81 81 ةيبَِرَعل 89 89 תירב 97 ִ 97
Anker PowerConf — At a Glance diagram (page 2)
Abb. 3 · At a Glance

1 Multi-function button 8 Power button

2 Volume down button 9 Bluetooth button

3 Mute button 10 Bluetooth LED

4 Phone call button 11 USB port (Type-A) for charge out

5 Volume up button 12 Audio output port

6 Status LED 13 USB port (Type-C) for charge in

EN 01

7 Power LED

Page 3 of the Anker PowerConf user manual — 02 EN EN 03
Seite 3 · Zum Vergrößern klicken
Seite 3
PressEnter Bluetooth pairing mode Flashes blueBluetooth pairing Steady blueBluetooth connected

Connecting

a) Connect to your computer by using a USB cable.

Anker PowerConf — Connecting diagram (page 3)
Abb. 4 · Connecting
  • Each time you power on the product, it will automatically connect with the last successfully connected device if available.
  • To disconnect Bluetooth, press the Bluetooth button again.

Powering On/Off

b) Connect to your computer or mobile device via Bluetooth pairing.

Press and hold the power button for 2 seconds to power on. The status LED will light on clockwise and then fade out. To power off, press and hold the power button for 2 seconds.

Power on this product for the first time, it will automatically enter the Bluetooth pairing mode.

Anker PowerConf — Powering On/Off diagram (page 3)
Abb. 5 · Powering On/Off
Anker PowerConf — Powering On/Off diagram (page 3)
Abb. 6 · Powering On/Off

02 EN EN 03

Page 4 of the Anker PowerConf user manual — 04 EN EN 05
Seite 4 · Zum Vergrößern klicken
Seite 4

Status LED behaviors

Steady whitePower on Light offPower off
Lights up white for 2 secondsUSB connected to computer Breathes greenComing call Lights up blue partlySound direction detected Lights up blue clockwise or counterclockwiseIncrease or decrease volume Turns redMuted Lights up greenPress Power button to check the battery level
Anker PowerConf — Status LED behaviors diagram (page 4)
Abb. 7 · Status LED behaviors
  • Once connected to your computer, it will automatically power on.
  • It will automatically power off after 30 minutes of inactivity or no source.

Button Controls

Press or press and holdVolume up / down PressAnswer / End a call Press and hold for 2 secondsReject a call PressMute or restore the microphone Press Play / Pause music
Anker PowerConf — Button Controls diagram (page 4)
Abb. 8 · Button Controls

Charging

a) Charging this product

Anker PowerConf — a) Charging this product diagram (page 4)
Abb. 9 · a) Charging this product

04 EN EN 05

Power LED behavior

Page 5 of the Anker PowerConf user manual — 06 EN EN 07
Seite 5 · Zum Vergrößern klicken
Seite 5

Audio Output

Steady redBeing charged Steady whiteFully charged Flashes redLow battery
Anker PowerConf — Audio Output diagram (page 5)
Abb. 10 · Audio Output

Connect an external speaker to the AUX jack of this product by using an AUX cable (not provided). The audio will be played through the speaker.

Anker PowerConf — Audio Output diagram (page 5)
Abb. 11 · Audio Output

b) Charging an external device

Anker PowerConf — b) Charging an external device diagram (page 5)
Abb. 12 · b) Charging an external device

Soundcore App

Download the Soundcore app for the software updates.

Anker PowerConf — Soundcore App diagram (page 5)
Abb. 13 · Soundcore App
  • When powered off or being charged, it won’t charge out.
  • When the remaining battery is less than 30%, the charge out current will be 5V 1A; if less than 10%, it won’t charge out.

Apple and the Apple logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google Inc.

06 EN EN 07

Power LED behavior

Page 6 of the Anker PowerConf user manual — DE 09 08 EN
Seite 6 · Zum Vergrößern klicken
Seite 6

Specifications

Auf einen Blick

Specifications are subject to change without notice.

Anker PowerConf — Specifications diagram (page 6)
Abb. 14 · Specifications
Anker PowerConf — Specifications diagram (page 6)
Abb. 15 · Specifications
Charge out5V 2.1A Rated output power 3W RMS Battery capacity6700 mAh Charging time 4 hours Talktime24 hours Driver size 1 x 1.75” (full range) Frequency response20 Hz - 20 kHz Bluetooth version V 5.0 Bluetooth range10 m / 33 ft

1 Multifunktionstaste 8 Ein-/Aus-Taste

2 Lautstärketaste (leiser) 9 Bluetooth-Taste

3 Stummschalttaste 10 Bluetooth-LED

4 Anruftaste 11 USB-Anschluss (Typ A) für Ausgang

5 Lautstärketaste (lauter) 12 Audioausgang

6 Status-LED 13 USB-Stromanschluss (Typ C) für Eingang

DE 09 08 EN

7 Betriebs-LED

Page 7 of the Anker PowerConf user manual — 78 CN CN 79
Seite 7 · Zum Vergrößern klicken
Seite 7

电源指示灯状态

音频输出

Anker PowerConf — 电源指示灯状态 diagram (page 7)
Abb. 16

使用 AUX 线缆(不提供)将外部扬声器连接至本品的 AUX 插孔。音频将通过 扬声器播放。

Anker PowerConf — 使用 AUX 线缆(不提供)将外部扬声器连接至本品的 AUX 插孔。音频将通过 扬声器播放。 diagram (page 7)
Abb. 17

b) 为外部设备充电

Anker PowerConf — b) 为外部设备充电 diagram (page 7)
Abb. 18 · b) 为外部设备充电

Soundcore 应用

Anker PowerConf — Soundcore 应用 diagram (page 7)
Abb. 19 · Soundcore 应用
  • 关闭电源或充电时,不会进行充电输出。
  • 剩余电量不足 30% 时,充电输出电流将为 5V 1A;如果剩余电量不足 10%,不会进行充电输出。

Apple and the Apple logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google Inc.

78 CN CN 79

下载 Soundcore 应用进行软件更新。

Page 8 of the Anker PowerConf user manual — 7 電源 LED 燈
Seite 8 · Zum Vergrößern klicken
Seite 8

产品参数

概觀

规格如有变更,恕不另行通知。

Anker PowerConf — 规格如有变更,恕不另行通知。 diagram (page 8)
Abb. 20
Anker PowerConf — 规格如有变更,恕不另行通知。 diagram (page 8)
Abb. 21

1 多功能按鈕 8 電源按鈕

2 音量降低按鈕 9 藍牙按鈕

3 靜音按鈕 10 藍牙 LED 燈

4 通話按鈕 11 充電輸出 USB 連接埠 (Type-A)

5 音量增加按鈕 12 音訊輸出連接埠

6 狀態指示燈 13 充電輸入 USB 連接埠 (Type-C)

7 電源 LED 燈

TW 81 80 CN

Page 9 of the Anker PowerConf user manual — 82 TW TW 83
Seite 9 · Zum Vergrößern klicken
Seite 9

已連線

Anker PowerConf — 已連線 diagram (page 9)
Abb. 22

a) 使用 USB 連接線連接至您的電腦。

Anker PowerConf — a) 使用 USB 連接線連接至您的電腦。 diagram (page 9)
Abb. 23 · a) 使用 USB 連接線連接至您的電腦。
  • 每次將產品開機時,它將會自動連線至您上次成功連線的裝置(如果有的 話)。
  • 如要中斷藍牙連線,請再次按下藍牙按鈕。

b) 透過藍牙配對連接至您的電腦或行動裝置。

開啟/ 關閉電源

初次將產品開機時,它會自動進入藍牙配對模式。

同時按住電源按鈕 2 秒以開機。狀態指示燈將會以順時針方向亮起,然後熄滅。 如要關機,按住電源按鈕 2 秒。

Anker PowerConf — 初次將產品開機時,它會自動進入藍牙配對模式。 diagram (page 9)
Abb. 24
Anker PowerConf — 初次將產品開機時,它會自動進入藍牙配對模式。 diagram (page 9)
Abb. 25

82 TW TW 83

Page 10 of the Anker PowerConf user manual — 84 TW TW 85
Seite 10 · Zum Vergrößern klicken
Seite 10

電源 LED 燈行為

狀態指示燈行 為

穩定亮起白燈 電源開啟

指示燈熄滅 電源關閉

Anker PowerConf — 電源 LED 燈行為 diagram (page 10)
Abb. 26
  • 在連線至您的電腦後,它將會自動開機。
  • 在閒置或未連接聲源 30 分鐘後,它將會自動關機。

按鈕控制項

充電

Anker PowerConf — 按鈕控制項 diagram (page 10)
Abb. 27

a) 為產品充電

Anker PowerConf — a) 為產品充電 diagram (page 10)
Abb. 28 · a) 為產品充電

84 TW TW 85

Page 11 of the Anker PowerConf user manual — 86 TW TW 87
Seite 11 · Zum Vergrößern klicken
Seite 11

電源 LED 燈行為

音訊輸出

Anker PowerConf — 電源 LED 燈行為 diagram (page 11)
Abb. 29

使用 AUX 連接線(未隨附)將外部喇叭連接至本產品的 AUX 插孔。將會透過 喇叭播放音訊。

Anker PowerConf — 使用 AUX 連接線(未隨附)將外部喇叭連接至本產品的 AUX 插孔。將會透過 喇叭播放音訊。 diagram (page 11)
Abb. 30

b) 為外部裝置充電

Anker PowerConf — b) 為外部裝置充電 diagram (page 11)
Abb. 31 · b) 為外部裝置充電

Soundcore 應用程式

Anker PowerConf — Soundcore 應用程式 diagram (page 11)
Abb. 32 · Soundcore 應用程式
  • 當已關機或是在充電中時,將不會輸出充電。
  • 當剩餘電池電量低於 30% 時,充電輸出電流將為 5V 1A;如果電量低 於 10% 時,將不會輸出充電。

Apple and the Apple logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google Inc.

86 TW TW 87

下載 Soundcore 應用程式進行韌體更新。

Frage zu Anker PowerConf stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Anker PowerConf

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Anker PowerConf PDF-Anleitung

54 Seiten·3.5 MB·Lautsprecher·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…