
Ref. nr.: 172.708

MANUEL D'INSTRUCTIONS

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference. - Prior to using the product, please ask advice from a
- Do not repeatedly switch the product on and off. This
specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while. - The product contains voltage carrying parts. Therefore do
shortens the life time. - Keep the product out of the reach of children. Do not
leave the product unattended. - Do not use cleaning sprays to clean switches. The
NOT open the housing. - Do not place metal objects or pour liquids into the
residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist. - Do not force the controls. - If this product is with speaker inside which can cause
product. This may cause electrical shock and malfunction. - Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes. - The product is not suitable for continuous use. - Be careful with the mains lead and do not damage it. A
magnetic field. Keep the product at least 60cm away from computer or TV. - If the product has built-in lead-acid rechargeable battery.
Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged. - If the battery is damaged please replace with same
faulty or damaged mains lead can cause electrical shock and malfunction. - When unplugging the product from a mains outlet,
always pull the plug, never the lead. - Do not plug or unplug the product with wet hands. - If the plug and/or the mains lead are damaged, they
specifications battery. And dispose the damaged battery environment friendly. - If the product has fallen, always have it checked by a
need to be replaced by a qualified technician. - If the product is damaged to such an extent that internal
qualified technician before you switch the product on again. - Do not use chemicals to clean the unit. They damage the
parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer. - To avoid fire and shock hazard, do not expose the
varnish. Only clean the product with a dry cloth. - Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
product to rain and moisture. - All repairs should be carried out by a qualified technician
damage and/or dangerous radiation may occur. - Switch the product off prior to unplugging it from the
only. - Connect the product to an earthed mains outlet (220-
mains and/or other equipment. Unplug all leads and cables prior to moving the product. - Make sure that the mains lead cannot be damaged when
240Vac/50Hz) protected by a 10-16A fuse. - During a thunderstorm or if the product will not be used
people walk on it. Check the mains lead before every use for damages and faults! - The mains voltage is 220-240Vac/50Hz. Check if power
for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use. - If the product has not been used for a longer period of
outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product. - Keep the original packing material so that you can
time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors. - To prevent accidents in companies, you must follow the
transport the product in safe conditions.
applicable guide lines and follow the instructions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee! NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.









Installation of batteries 1. Remove the cover


- The batteries must be placed correctly. - Do not recharge, heat, open or short-circuit the batteries. Do not throw the batteries into open fire. - Do not mix different types batteries or old and new batteries. - If the remote control does not work properly, or if the range is reduced, all batteries should be replaced.

When you press the “Setup”-button on the remote control, the setup menu will be displayed. When you have entered the setup menu, press the Scroll buttons to navigate and select the item desired. When you have selected an item press ENTER to confirm the entry and go to the sub-menu. GENERAL SETUP TV SYSTEM Select PAL or NTSC to match the region setting of your TV type. Select AUTO to have the PDC150 detect the format.

SCREEN SAVER Screen saver is used to protect your TV/video monitor when the player is idle for a signify cant period of time. ON: A screen saver will appear after the PDC150 is idle for a period of time. OFF: There will be no screen saver.

VIDEO Select the type of output you are using to connect the PDC150 to your TV system: S-video, YUV and RGB.

TV TYPE Select the format of the TV to which the PDC150 is connected.


PASSWORD Here the password function can be activated. If the password function is not “ON”, the parental control settings can easily be changed. Note: The default password is “8888”

RATING This function is used to limit children’s watching of films with “adult scenes”. Parental control varies from film to film and is indicated on the film cover. There are eight Parental control levels from 1 to 8. When the parental control level is set to 8, all films can be watched. Note: The password setting must be “OFF” before the parental control settings can be changed.


LAST MEMORY When this mode is enabled, the PDC150 will store the point that your disc was stopped, and return to that point when the disc is resumed. The disc can be removed from the player and the LAST MEMORY function will still play from the last point.


LANGUAGE OSD LANGUAGE This function allows you to select a language for the setup menu and for the screen display. You can choose between English, Chinese, German, Spanish, French and Portuguese.

AUDIO LANGUAGE Used to select the desired dubbing/audio language for the DVD film. You can choose between English, Chinese, Japan, French, Spanish, Portuguese, German, Latin. Note: This is only possible if the DVD supports the audio language in question.

SUBTITLE LANGUAGE Used to select the desired subtitle language for a DVD film. You can choose between English, Chinese, Japan, French, Spanish, Portuguese, German or switch off. Note: This is only possible if the DVD supports the subtitle language in question.

MENU LANGUAGE This function allows you to select menu language. You can choose between English, Chinese, Japan, French, Spanish, Portuguese, German, Latin.


AUDIO AUDIO OUTPUT Here you set up the digital sound format that comes from the co- axial or optical output on the back panel. This signal is used when the unit is connected to a digital surround receiver. OFF: Closes the digital outputs RAW: Opens for the pure, non-modulated digital signal. PCM: Stands for Pulse Code Modulation. It may be necessary to activate this function if the digital surround receiver cannot recognise the sound format.

MICROPHONE SETUP Adjust the microphone setup.

PROLOGIC Adjust the prologic sound modus.

ECHO Adjust the echo effect of the microphone.

MICROPHONE VOLUME Adjust the volume of the microphone.


BRIGHTNES BRIGHTNESS Increase or decrease the brightness of your on-screen image.

CONTRAST Adjust the contrast of your on-screen image.

HUE Adjust the HUE variance of the on-screen image.

SATURATION Adjust the saturation of the on-screen image.

SHARPNESS Set the level of sharpness of your on-screen image.


DOWNMIX DOWNMIX Select analogue sound format. LT/RT: It’s used when the unit is connected to a Pro Logic receiver through stereo RCA cables. Stereo: Used when the unit is connected via amplifier through stereo RCA cables.

DOLBY SURROUND OP MODE Select Line Out or RF Remodulation.

DYNAMIC RANGE To avoid disturbing the neighbours at night, you can use this function to reduce the sound effects volume without changing the original tone.

DUAL MONO Here you can choose between stereo, left channel mono, right channel mono or mixed mono. This function can e.g. be used for a VCD with two languages. (e.g. English on the left side and French on the right side) Stereo output: Outputs audio in stereo. L-mono: Plays the Left side only through both Left and Right speaker outputs. R-mono: Plays the Right side only through both the Left and Right speaker output. Mix-mono: Plays virtual stereo with Left and Right Mono coming out of the Left and Right speaker outputs.


Problem Possible solution No power supply Check that the plug has been inserted properly into the socket. No picture Check the connection between DVD player and TV set. Check that the TV set is working properly No sound Check the connection between DVD-player and any other connected units Check that the TV set and amplifier are working properly and adjusted correctly. The CD/DVD won’t play Check that the CD/DVD has been inserted correctly. Clean the CD/DVD. CD/DVD-player doesn’t react to signal from remote control
Remove any objects blocking the signal between remote control and CD/DVD-player. Check that the remote control is aimed at the front panel sensor on the CD/DVD-player. Check the batteries in the remote control and replace as necessary. Picture has interference Check the CD/DVD for dust and scratches. Clean or replace the CD/DVD. Turn off the device, wait for then seconds and turn it on again. Nothing happens when CD/DVD-player unit buttons are pressed
Possible power drop out or power cut. Turn off the device, wait for ten seconds and turn it on again.

TECHNICAL SPECIFICATION / TECNISCHE SPECIFICATIE / TECHNISCHE DATEN / ESPECIFICACIONES TÉCNICAS / SPÉCIFICATIONS TECHNIQUES
Rated voltage : AC 100~230V 50/60Hz Power Consumption : 10W VF Signal system : NTSC / PAL Frequency Response : 4Hz-22KHz Audio S/N ratio : > 92dB Suitable Disc : DVD Audio, DVD Video, Video CD, Audio CD, HDCD, MP3, JPEG, Kodak CD, CD-R, CD- RW, WMA Weight (per unit) : 2.7 Kg Dimensions per unit : 480 x 45 x 280mm The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.


Manufacturer: TRONIOS BV Bedrijvenpark Twente 415 7602 KM – ALMELO +31(0)546589299 +31(0)546589298 The Netherlands Product number: 172.708 Product Description: PDC150 19" DVD/CD Player Trade Name: POWER DYNAMICS Regulatory Requirement: EN 55013:2001+A1: 2003+A2: 2006 EN 61000-3-2: 2006+A1: 2009+A2: 2009 EN 61000-3-3: 2008 EN 55020: 2007 EN 60065: 2002+A1: 2006+A11: 2008 hereby declare that the product meets the requirements stated in Directives 2014/35/EU and 2014/30/EU and conforms to the above mentioned Declarations. Almelo, 27-10-2016 Name : M. Velders Signature :


Specifications and design are subject to change without prior notice..
Copyright © 2016 by TRONIOS the Netherlands
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.