


Übersetzung der Originalbetriebsanleitung 14
Vertaling van de oorspronkelijke gebruiksaanwijzing 24
Traduction de la notice originale 33
Traducción del manual original 42
Traduzione delle istruzioni originali 51
Översättning av bruksanvisning i original 60
Alkuperäisten ohjeiden käännös 68
Eredeti használati utasítás fordítása 76
Originalios instrukcijos vertimas 85
Instrukciju tulkojums no oriģinālvalodas 94
Original instructions 06


Fig. A
Fig. B Fig. C



B
Fig. D-1 Fig. D-2


Fig. E-1 Fig. E-2




max. 5mm
Fig. E-3 Fig. F-1





Fig. F-2 Fig. F-3



Fig. G-1 Fig. G-2
B D1 D2




Fig. G-3 Fig. G-4
Type 1 · Type 2 · Type 2







Fig. G-5 Fig. G-6
Fig. G-7 2x rear


Fig. H
Fig. I


Fig. J Fig. K
2x front

Product information Fig. A 1. Protective cap 2. Parallel guide 3. Table 4. Mitre handle 5. Height handle 6. Ruler for parallel guide 7. On/off switch 8. Thermic safety switch 9. Workbench
Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe’s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.
Check first whether or not the delivery has been damaged by transport and/or whether all the parts are present.
The numbers in the following text refer to the pictures on page 2 - 5
Read the operating instructions carefully before using this device. Familiarise yourself with its functions and basic operation. Service the device as per the instructions to ensure that it always functions properly. The operating instructions and the accompanying documentation must be kept in the vicinity of the device.
Denotes risk of personal injury, loss of life or damage to the tool in case of non- observance of the instructions in this manual.
Indicates the presence of an electrical voltage.
Contents 1. Technical specifications 2. Safety instructions 3. Assembly instructions 4. Operation 5. Maintenance
Immediately unplug the plug from the mains electricity in the case that the cord gets damaged and during maintenance.

Keep bystanders away.
Voltage 230-240 V~ Frequency 50 Hz Power input 1500W (S1) 1800 W (S6 40%) No load speed 4700/min Saw blade dimensions 250 x 30 x 2.8 mm Number of teeth T40 Max.workpiece height 90º 74 mm Max.workpiece height 45º 63 mm Thickness of the riving knife 2.0 mm Blade body thickness 1.6-1.9 mm Measurements of bench (max) 930 x 625 mm Weight 22.5 kg Lpa (sound pressure level) 94.8 dB(A) K=3dB Lwa (sound power level) 107.8 dB(A) K=3dB
Always wear eye protection!
Wear hearing protection.
Class II machine - Double insulation - You don’t need any earthed plug.
Explanation of symbols

Material to be processed This powertool is intended as a stationary machine for making straight lengthways and crossways cuts in hard and soft wood free from foreign bodies such as nails, screws and mortar.

Additional safety instructions 1. When using the saw blades with hard metal teeth (Carbon tipped) it is advisable to use blades with a negative or slightly positive cutting angle. Do not use any saw blades with deeply cut teeth. They can grip the protective cap. 2. Attention: First carefully assemble all the parts before starting work. Follow the procedure as indicated. 3. If you are not familiar with using such a machine, you would be better to be informed first by a professional, an instructor or by a technician. 4. Always clamp or press the workpiece firmly against the saw guide, before you carry out the process. The use of all possible clamping set- ups is preferable to using your hands. 5. Important: If you are holding the workpiece by hand for the process to be carried out, keep a minimum distance of 100 mm from the saw blade. 6. Always press the workpiece against the bench. 7. Keep the saw blade sharp and check regularly whether it rotates freely without abnormal vibrations. Replace the saw blade if necessary. 8. Allow the machine to rotate freely until it reaches the maximum number of revolutions, before you start the process. 9. Maintain the air inlets at the back and the bottom of the bench saw machine and electric motor for a longer machine life. Dust piles must be removed. 10. Always lock the different degree set-ups before you start processing. 11. Only buy suitable saw blades with a number of revolutions of at least 6000 revolutions per minute. 12. Only use the correct saw blade. Too small or too big saw blades are extremely dangerous. 13. Regularly inspect the saw blade for any faults. Replace the saw blade if necessary. 14. Grease the new saw blade and clean the flanges before you assemble the new blade. Then assemble the blade in the correct direction and pull the flanges firmly using the central bolt. 15. Only use original flanges. All other types are not suitable. 16. Never work without the protective cap of the saw blade. 17. The moving part of the protective cap must also remain assembled.

deformed. 39. Replace table insert when worn. 40. Only use saw blades specified by the manufacturer that are intended for working with wood or similar materials according to EN847-1. 41. Take care that the selection of the saw blade depends on the material to be cut. 42. Connect tabelsaws to a dust-collecting device when sawing. 43. Use and correct adjustment of the riving knife 44. Use and correct adjustment of the upper saw blade quard. 45. Take care when slotting.
Electrical safety When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.
Always check that the power supply corresponds to the voltage on the rating plate.
Replacing cables or plugs Immediately throw away old cables or plugs when they have been replaced by new ones. It is dangerous to insert the plug of a loose cable in the wall outlet.
Power supply • The motor is fitted with an overload switch (8). If the table saw overloads, the overload switch switches the equipment off automatically to protect the table saw from overheating. If the overload switch triggers, switch off the table saw using the ON/OFF switch (7) and wait until the table saw cools down. Then press the overload switch (8) and restart the table saw.

Installation of the machine on a workbench or on the subframe This machine is a stationary machine and for safety reasons must always be firmly installed and not used for mobile applications.
You can install the machine in two ways: a. As a stationary machine on a workbench. In
this case the machine must be secured to the workbench with 4 bolts. b. As a stationary machine on the subframe. In
this case the machine must be secured to the subframe with 4 bolts and the subframe anchored to the floor or to a floor plate with dimensions of at least 1 square metre
Assembly of the bench saw on the workbench Fig. B & C
Before adjusting the saw, make sure the plug is removed from the socket.
Fig. B shows the distance of the holes to be drilled in the workbench on which to fasten the machine. Drill holes of 8 mm.
Only use the machine after it has been assembled completely and it has been screwed onto the workbench or the frame.

Assembly of the saw blade Fig. K
First remove the plug from the mains before the saw blade is assembled or replaced.
The arrow marked on the saw blade, which indicates the direction of rotation. Must point in the same direction as the arrow marked on the machine, the saw blade teeth must point downwards on the front of the saw.
If it concerns a panel, we do not usually distinguish between the wood grain, but we name the method where we saw off a part of the width of the panel (lengthwise sawing) and when we cut off the length (cross-cutting or cutting-off).
For both sawing methods one of the fences must be used. Therefor never saw without a fence!
Use of the mitring set-up Fig. A By turning the handle (4) at the front of the machine you can adjust the saw blade to a maximum of 45°.
It is absolutely necessary to take these points into consideration before you start work!

Remain at least 3 cm. from the front of the saw blade before you switch on the motor. The side of the wood which is against the fence must be completely straight. Keep your hands at least 10 cm away from the saw track to be followed.
completely before you remove the wood. • Never pull the wood back. If necessary, switch the motor off and keep the position until the saw blade has stopped completely.
Crosswise sawing with a vertical mitre This method is practically the same, except that the saw blade is placed in the angle required.
Only place the cross-cut fence on the righthand side of the saw blade. Never saw too small pieces of wood. Never use your hands to carry out difficult operations.
Crosswise sawing with a horizontal mitre With this method the cross-cut fence must be secured at the angle required. Keep the workpiece pressed firmly against the cross-cut fence and the bench before you start cutting off.
Lengthwise sawing with a (vertical) mitre This method is practically the same, except that the saw blade is placed at the angle required.
With this type of method the fence may only be along the righthand side of the sawblade.
Make sure that the machine is not live when carrying out maintenance work on the motor.
Lengthwise sawing of narrow workpieces
Assume that this process is extremely dangerous.
These machines have been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning.

The bench saw should always be carried by two persons in order to avoid back injuries.
Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the motor. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
Malfunctions In the case that the machine is not functioning properly, we give a number of possible causes and appropriate solutions below.
Lubrication The machine requires no additional lubrication.
Faults Should a fault occur, e.g. after wear of a part, please contact your local Ferm dealer. In the back of this manual you find an exploded view showing the parts that can be ordered.
riving knife during processing • The saw blade must be aligned (Fig. E).
To prevent damage during transport, the appliance is delivered in a solid packaging which consists largely of reusable material. Therefore please make use of options for recycling the packaging.
Damaged and/or disposed of electrical or electronic devices must be dropped off at recycling stations intended for that purpose.
Only for EC countries Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.
Read the warranty conditions on the separately supplied warranty card.
The product and the user manual are subject to change. Specifications can be changed without further notice.

No. Description Position
480000 Angle adjustment handle 9-13
480001 Switch for table saw 19
480002 Depth adjustment handle 28-32
480003 Tooth orbit 36
480004 Flange set 87+114
480005 Flange screw set 85-86
400810 Bearing 6003 zz 107
480006 Carbon brush set + cover 126-127
409074 Carbon brush holder 128
409076 Rotor complete (incl. bearings) 140-142 + 134 + 138
409079 Motor housing+ wind ring 130+136+137+ 139 +139A
480008 Table + angle scale 8+146
480009 Guard set complete 155A-160
126011 Push stick F43
Spare parts list · 409075 Stator 134


Exploded view



TSM1033 - TABLE SAW
(EN) We declare under our sole responsibility that this product is in conformity with
(CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s
directive 2011/65/EU of the European parliament and of the council of 9 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations: (DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive
následujícími standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení. (SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento výrobok je v zhode a súlade
s nasledujúcimi normami a predpismi: Je v súlade s normou 2011/65/EÚ Európske- ho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení. (SL) S polno odgovornostjo izjavljamo, da je ta izdelek v skladu in da odgovarja nasledn-
2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht: (NL) Wij verklaren onder onze volledige verantwoordelijk heid dat dit product voldoet aan
jim standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parla- menta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v električni in elektronski opremi. (PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w
de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni 2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur en in overeenstem ming is met de volgende standaarden en reguleringen: (FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux
następujących normach i przepisach: jest zgodny z Dyrektywą 2001/65/UE Parla- mentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stoso- wania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronic- znym. (LT) Prisiimdami visą atsakomybę deklaruojame, kad šis gaminys atitinka žemiau
standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d’usage de certaines substances dangereuses dans l’équipement électrique et électronique. (ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con
paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikrų pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo. (LV) Ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/
las siguientes normas y estándares de funcionamiento: se encuentra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos eléctricos y electrónicos. (PT) Declaramos por nossa total responsabilida-de que este produto está em
ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā un atbilst sekojošiem stand-
conformidade e cumpre as normas e regulamentações que se seguem: está em conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de determinadas substâncias perigosas existentes em equipamento eléctrico e electrónico. (IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle
artiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în
conformitate cu următoarele standarde sau directive: este în conformitate cu Directiva 2011/65/UE a Parlamentului European şi a Consiliului din 8 iunie 2011 cu privire la interzicerea utilizării anumitor substanţe periculoase la echipamentele electrice şi electronice. (HR) Izjavljujemo pod vlastitom odgovornoĻśu da je strojem ukladan sa slijedeśim
normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell’8 giugno 2011 sulla limitazione dell’uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche. (SV) Vi garanterar på eget ansvar att denna produkt upp fyller och följer följande
standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi. (SRL) Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili
standarder och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska parlamentet och EG-rådet från den 8 juni 2011 om begränsningen av användning av farliga substanser i elektrisk och elektronisk utrustning. (FI) Vakuutamme yksinomaan omalla vastuullamme, että tämä tuote täyttää seuraavat
normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od 8.juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i elektronskoj opremi. (RU) Под свою ответственность заявляем, что данное изделие соответствует
standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta 2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden käytön rajoitusta sähkö- ja elektronisissa laitteissa. (NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende
следующим стандартам и нормам: соответствует требованиям Директивы 2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по ограничению использования определенных опасных веществ в электрическом и электронном оборудовании (UK) На свою власну відповідальність заявляємо, що дане обладнання відповідає
standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa- parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse farlige stoffer i elektrisk og elektronisk utstyr. (DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende
standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr. (HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben
наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/ ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. (EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω
megfelel az alábbi szabványoknak és előírásoknak: je v souladu se směrnicí 2011/65/EU Evropského parlamentu a Rady EU ze dne 8. června 2011, která se týká omezení použití určitých nebezpečných látek v elektrických a elektronických zařízeních.
κανονισμούς και πρότυπα: συμμορφώνεται με την Οδηγία 2011/65/ΕΕ του Ευρωπαϊκού Κοινοβουλίου και του Συμβουλίου της 8ης Ιουνίου 2011 για τον περιορισμό της χρήσης ορισμένων επικίνδυνων ουσιών σε ηλεκτρικό και ηλεκτρονικό εξοπλισμό.
EN61000-3-2, EN61000-3-11, IEC 62321
2006/42/EC, 2014/30/EC, 2011/65/EU, 2012/19/EU
Zwolle, 01-09-2016 H.G.F Rosberg CEO FERM B.V. Dokumentationsbevollmächtigter
FERM B.V. - Lingenstraat 6 - 8028 PM - Zwolle - The Netherlands

WWW.FERM.COM ©2016 FERM B.V.
1609-29
In dieser Anleitung genannte Seiten – Hersteller, Support und Downloads.
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.