
IT UTNÄMND
DE
FR



Please refer to the last page of this manual for the full list of IKEA appointed Authorized Service Centre and relative national phone number
Konsultieren Sie die letzte Seite dieser Bedienungsanleitung, auf der die vollständige Liste der nationalen autorisierten IKEA Kundendienststellen mit den entsprechenden Telefonnummern aufgelistet ist.
Consultez la dernière page de ce manuel contenant la liste complète des services Après-vente agréés IKEA avec les numéros de téléphone nationaux correspondants.
Consultare l’ultima pagina di questo manuale dove è riportato l’elenco completo dei Centri Assistenza IKEA Autorizzati con i relativi numeri telefonici nazionali.


the appliance. • Only use the screws and other hardware elements supplied with the appliance.

person responsible for their safety. • This appliance may be used by children over the age of 8 years and by persons with limited physical, sensory or mental abilities or with insufficient experience and knowledge, provided they are carefully supervised and instructed on safe use of the appliance and on the dangers that it involves. Do not allow children to play with the appliance.
extremely hot during use.
Take great care not to touch the heating elements.
Keep children under 8 years of age well away from the appliance, unless they are under constant supervision.


must be mounted with heat-resistant adhesives (min. 85° C): the use of unsuitable material and adhesives may result in warping and detachment. • The use of decorative hardwood borders around the worktop behind the appliance is allowed, provided the minimum distance always complies with the indications provided in the installation drawings.



L1 L2 L3 N N L1 L2 N2 N1 220V - 240V 2N
L = Black L = Brown N = Blue N = Grey = Yellow / Green
L1 = Brown L2 = Black N = Blue N = Grey = Yellow / Green
L1 = Brown L2 = Black N1 = Blue N2 = Grey = Yellow / Green



400V 2N ~ 1 2 3 4 5 6
L = Black L = Brown N = Blue N = Grey = Yellow / Green
L1 = Brown L2 = Black N = Blue N = Grey = Yellow / Green
L1 = Brown L2 = Black N1 = Blue N2 = Grey = Yellow / Green



Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
Single cooking area (200 mm) 2300W, with Booster 3000W.
Single cooking area (160 mm) 1400W, with Booster 2100W.
+ Bridge cooking area (210 x 380 mm) 3000W, with Booster 3700W.
Pot detection Each of the cooking areas is equipped with a system to detect the presence of a pan. The pan presence detection system recognises pans with a magnetisable base suitable for use with induction hobs. If the pan is removed during operation, or if an unsuitable pan is used, the display shows the symbol .
Residual heat indicator The residual heat indicator is a safety feature, indicating that the surface of the cooking area is still at a temperature of 50° C or above, which may cause burns if touched by a naked hand. The digit for the corresponding cooking area displays .
Control panel


The cooking areas can be activated by pressing on the corresponding scroll keypad. The
It is also possible to activate the cooking areas simply by resting a cookware on the cooking area. The hob automatically recognizes the cookware and its dimensions and enables the necessary cooking areas as a result.

When first connecting to the domestic power supply, the installer must set the power of the hob cooking areas based on the actual abilities and capacity of the power supply itself. If this is not necessary, the hob can be turned on directly using , otherwise, follow the operations below to access the menu.
- Connect the hob to the domestic mains power (this operation must be carried out every time you wish
to access the menu). - All the digits light up for a few seconds. - As soon as the digits go out again, press and hold and for 4 seconds until the left hand scroll keypads light up. - Press and hold for 4 seconds both illuminated scroll keypads on the left simultanesly until the 3
command digits show “ CF6 “. - Press until it shows “ PHA “. - Press the furthest to the left scroll keypad to select the correct setting. See the table below for the specifications:
Value on the scroll keypad Kw Notes
0 7.4 Kw Standard initial setting
4 3.5 Kw
6 2.5 Kw
Once the correct value has been entered, confirm by pressing and holding and .

Each cooking area can be set to an extra power level for 5 minutes at most.
To activate: select one of the 4 cooking areas and select the value “Boost” on the scroll keypad. The corresponding digit displays .
To deactivate: select one of the other possible values on the scroll keypad.
This function prevents an accidental operation of the appliance.
To activate: simultaneously press and , release and the press again. All the digits display . The operations described must be completed within 10 seconds.
To deactivate: simultaneously press and , release and the press again. All the digits displaying go out. The operations described must be completed within 10 seconds.
It is possible to lock the hob functions during use to avoid accidental modifications, for example in order to clean the hob.
To activate: press .
To deactivate: press .
Timer with alarm for cooking times.
To activate: turn the hob on and select one of the 4 cooking areas, press “+” and "-” to set the Timer. The symbol for the cooking area lights up. Press individually on “+” and “-” to set the countdown. The Time increase and decrease during set-up varies according to the time to be set. The Displays in the Timer management commands area show the countdown. Do not touch anything for 5 seconds to confirm the time.
To disable: wait until the end of the countdown or set the Timer values to zero (press “+” and “-” and set zero with “-”.

Timer with alarm for generic use.
To activate: turn the hob on, press “+” and "-” to set the Timer. Press individually on “+” and “-” to set the countdown. The Time increase and decrease during set-up varies according to the time to be set. The Displays in the Timer management commands area show the countdown. Do not touch anything for 5 seconds to confirm the time.
To disable: wait until the end of the countdown or set the Timer values to zero (press “+” and “-” and set zero with “-”.
Select one of the 4 cooking areas and press and hold for 3 seconds on the selected value (from 1 to 8) on the scroll keypad. The Hob will have a peak of up to maximum power for a time that varies according to the previously set cooking power and than remain to the value set at the beginning(from 1 to 8).
Power Time at maximum Power
This function freezes all the hob settings if the person using the hob needs to go away for a time.
During the pause, all digits display to indicate that: - No energy is being produced in any of the cooking areas. - All function and timer are disabled
To activate: with the hob working, press and hold for at least 1 second.
To deactivate: press and hold for at least 1 second and slide your finger from minimum to maximum along the scroll keypad that shows an animation.
This function is used to recall all the hob function settings in the event of involuntary shut-down using .
With the hob turned off, to recover the previous settings press within 6 seconds, and press within 6 seconds. A beep sounds to confirm the operation.
With the hob turned off, if it is not turned on again within 6 seconds the previous function settings will be lost.

To activate: select one of the 4 cooking areas and press . The digit for the selected area will show
To deactivate: press or press .
This function allows 2 cooking areas to be connected, so that they can be controlled as a single, large cooking area. This means it is possible to use larger pans. This function can only be used with the left hand cooking areas.
To activate: simultaneously press both left scroll keypads until a digit displays and the symbol will light up. To set the power of the bridge zone use the furthest left scroll keypad. In both the cooking areas, the symbol will light up.
To deactivate: simultaneously press the buttons that have been used to activate the bridge, until the symbols and disappears.

7 Light frying Rösti (potato fry-ups), omelettes, breaded and fried foods, sausages
Melting function · Bridge Function

This product is equipped with electronically controlled Power Management. See the illustration. This function monitors electric loading and limits the maximum power output to 3700 W for each cooking area group (1+2 and 3+4), optimizing the power distribution and preventing the system from overloading. Hob in full power setting - the function divides the power between cooking areas belonging to the same group and automatically decreases the power of the other cooking area, if necessary (the last command has highest priority). Hob in power limitation setting - the function divides the power between cooking areas and doesn’t allow to set the power for the other cooking areas exceeding the limit (to increase the power of particular cooking area, the power setting for the other ones need to be lowered manually).
Example: If boost level (P) is selected for cooking area 1, cooking area 2 cannot exceed the level 9 at the same time and will be automatically limited.


Empty or thin-based pots/pans Do not use empty or thin-based pots/ pans on the hob as it will not be able to monitor the temperature or turn off automatically if the temperature is too high, damaging the pan or the hob surface. If this occurs, do not touch anything and wait for all components to cool down. If an error message appears, refer to “Troubleshooting”.
To determine if a pot or pan is suitable, check for the symbol (usually stamped on the bottom). You can also hold a magnet to the bottom. If it clings to the underside, the cookware will work on an induction hob. To ensure optimum efficiency, always use pots and pans with a flat bottom that distributes the heat evenly. If the bottom is uneven, this will affect power and heat conduction.
area Cookware diameter (mm)
How to use Minimum diameter of pot/pan base for the different cooking areas To ensure that the hob functions properly, the pot must cover one or more of the reference points indicated on the surface of the hob, and must be of a suitable minimum diameter. Always use the cooking area that best corresponds to the diameter of the bottom of the pan.
Ø min. (recommended)
side 190 mm 370 mm
Right rear 110 mm 200 mm
Right front 110 mm 160 mm
Left rear 110 mm 190 mm
Left front 110 mm 190 mm
Cooking · Ø max (recommended) · Bridge left


code Description Possible causes of the error Solution
Continuous key activation detected. Water or cookware placed on Control panel.
Hob switches off after 10 sec.
Remove water or cookware from glass and Control panel.
Let the hob cool down. Please check if the hob has sufficient ventillation. If error persists, please contact After Sales Service.
ER21 Hob switches off. The internal temperature of electronic parts is too high.
Corresponding cooking area is turned off.
Empty or wrong cookware. Pot or glass temperature is too high. Electronic temperature too high.
Let the hob cool down. Use appropriate cookware. Do not heat-up empty pots.
Use appropriate cookware. The error is automatically cancelled after 8s and the cooking area can be used again. In case of further upcoming errors cookware have to be changed. If error persists, please contact After Sales Service.
Wrong cookware. Cookware is losing its magnetic characteristics and may lead to induction hob damage.
Corresponding cooking area is turned off.
E6 Cooking area cannot be turned on.
Power supply voltage and/or frequency is out of range.
Check mains voltage and/or frequency. If needed contact After Sales Service.
Clean and remove foreign bodies from fan. If error persists, please contact After Sales Service.
E8 Cooking areas are turned off.
Fan failure. Fan blocked by dust or fabrics.
Temperature sensor stuck for cooking area. Not enough temperature change detected after switching on the hob.
Corresponding cooking area is turned off.
Switch off the hob and switch it on again after cooling down. If error persists, please contact After Sales Service.
Disconnect the hob from the power supply. Reconnect the hob accordind to provided schematics. If error persists, please contact After Sales Service. E4 E5 E7 E9 ER20 ER22 ER31 ER36 ER40 ER47
U400 Overvoltage due to wrong electrical connection.
Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply. If the problem persists, call the service centre and specify the error code that appears on the display.
Error

Maintenance and repairs - Make sure that maintenance on
electrical components is only carried out by the manufacturer or by the service technicians. - Make sure that damaged cables are
only replaced by the manufacturer or by the service technicians.
If there is a fault, try to resolve it by following the troubleshooting guidelines. If the problem cannot be resolved, contact your IKEA store or the After Sales Service. You can find a full list of IKEA appointed contacts at the end of this user manual.
When contacting the After Sales Service please provide the following information: - type of fault - appliance model (Art./Cod.) - serial number (S.N.) This information can be found on the rating plate. The rating plate is affixed to the bottom of the appliance.
If you operated the appliance wrongly, or the installation was not carried out by an authorized installer, the visit from the After Sales Service technician or dealer may not take place free of charge, even during the warranty period.


Power supply voltage/frequency 220-240 V, 50 Hz; 220 V, 60 Hz 2N~ 380-415 V, 50 Hz; 2N~ 380 V, 60 Hz;

Dimension of Bridge cooking area Left 210 x 380 mm
Energy consumption of the hob (electric cooking) 188 Wh/kg

Information on the product pursuant to EU regulation n° 66/2014 Reference standards: EN/IEC 60350-2 EN/IEC 50564
This appliance has been designed,
“The technical data is provided on the rating plate affixed to the bottom of the product.”
manufactured and sold in compliance with EEC Directives.

The graphic above represents the rating plate of the appliance. The serial number is specific to each product.
Dear Customer, keep the additional rating plate attached to the cover of Safety booklet inside the product. This will allow us to assist you better by identifying precisely your hob, in case you need our assistance in the future. Thank you for your help!

Disposal of household appliances
Disposal of packaging materials
Materials with the symbol can be recycled. Dispose of packing materials in special recycling collection bins.
How long is the IKEA guarantee valid? This guarantee is valid for five (5) years from the original date of purchase of Your appliance at IKEA. The original sales receipt is required as proof of purchase. If service work is carried out under guarantee, this will not extend the guarantee period for the appliance. Who will execute the service? IKEA service provider will provide the service through its own service operations or authorized service partner network.
guarantee?” Within the guarantee period, the costs to remedy the fault e.g. repairs, parts, labour and travel will be covered, provided that the appliance is accessible for repair without special expenditure. On these conditions the EU guidelines (Nr. 99/44/EG) and the respective local regulations are applicable. Replaced parts become the property of IKEA.
What will lKEA do to correct the problem? IKEA appointed service provider will examine the product and decide, at its sole discretion, if it is covered under this guarantee. If considered covered, IKEA service provider or its authorized service partner through its own service operations, will then, at its sole discretion, either repair the defective product or replace it with the same or a comparable product.
What does this guarantee cover? The guarantee covers faults of the appliance, which have been caused by faulty construction or material faults from the date of purchase from IKEA. This guarantee applies to domestic use only. The exceptions are specified under the headline “What is not covered under this

transport. However, if IKEA delivers the product to the customer’s delivery address, then damage to the product that occurs during this delivery will be covered by this guarantee. • Cost for carrying out the initial installation of the IKEA appliance. However, if an IKEA service provider or its authorized service partner repairs or replaces the appliance under the terms of this guarantee, the service provider or its authorized service partner will re-install the repaired appliance or install the replacement, if necessary. This restriction do not apply to fault-free work carried out by a qualified specialist using our original parts in order to adapt the appliance to the technical safety specifications of another EU country.
How country law applies The IKEA guarantee gives You specific legal rights, which covers or exceed local demands. However these conditions do not limit in any way consumer rights described in the local legislation

The dedicated After Sales Service for IKEA appliances: Please do not hesitate to contact IKEA After Sales Service to: 1. make a service request under this guarantee; 2. ask for clarification on installation of the IKEA appliance in the dedicated IKEA kitchen furniture. The service won’t provide clarifications related to: - the overall IKEA kitchen installation; - connections to electricity (if machine comes without plug and cable), to water and to gas since they have to be executed by an authorized service engineer. 3. ask for clarification on user manual contents and specifications of the IKEA appliance.
Do You need extra help? For any additional questions not related to After Sales of your appliances. Please contact our nearest IKEA store call centre. We recommend you read the appliance documentation carefully before contacting us.
To ensure that we provide you with the best assistance, please read carefully the Assembly Instructions and/or the User Manual section of this booklet before contacting us. How to reach us if You need our service
Please refer to the last page of this manual for the full list of IKEA appointed contacts and relative national phone numbers.
Important! In order to provide You with a quicker service, we recommend that You use the specific phone numbers listed at the end of this manual. Always refer to the numbers listed in the booklet of the specific appliance You need an assistance for. Before calling us, assure that You have to hand the IKEA article number (8 digit code) for the appliance of which you need our assistance.
Was die auf dem Display angezeigten Fehlercodes bedeuten und wie man sie behebt.
| Code | Bedeutung | Lösung | |
|---|---|---|---|
| ER21 | Hob switches of.f | Let the hob cool down. Please check if the hob has sufcfi ient ventillation. If error persists, please contact After Sales Service. | p.20 |
| E2 | Corresponding cooking area is turned of.f | Let the hob cool down. Use appropriate cookware. Do not heat-up empty pots. | p.20 |
| E3 | Corresponding cooking area is turned of.f | Use appropriate cookware. The error is automatically cancelled after 8s and the cooking area can be used again. In case of further upcoming errors cookware have to be changed. If error persists, please contact After Sales Service. | p.20 |
| E6 | Cooking area cannot be turned on. | Check mains voltage and/or frequency. If needed contact After Sales Service. | p.20 |
| E8 | Cooking areas are turned of.f | Clean and remove foreign bodies from fan. If error persists, please contact After Sales Service. | p.20 |
| U400 | Overvoltage due to wrong electrical connection. | Disconnect the hob from the power supply. Reconnect the hob accordind to provided schematics. If error persists, please contact After Sales Service. | p.20 |
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.