
GRUNDAD
DE

ENGLISH Please refer to the last page of this manual for the full list of IKEA appointed After Sales Service Provider and relative national phone numbers.
DEUTSCH Auf der letzten Seite dieser Broschüre finden Sie eine vollständige Liste der offiziellen IKEA After-Sales-Dienstleister mit den jeweiligen nationalen Telefonnummern.




Follow the Assembly instructions supplied with the appliance.


use abrasive products, abrasive cleaning pads, solvents or metal objects.


Installation process must follow the laws, ordinances, directives and standards (electrical safety rules and regulations, proper recycling in accordance with the regulations, etc.) in force in the country of use!


Main power connection 1- phase
Main power connection 2- phase



N Blue N Blue N Blue L Black or brown L1 Black N Blue L2 Brown L Black L Brown
Once you connect the hob to the mains, check if all the cooking zones are ready to use. Place a pot with some water on a
Tighten the terminal screws securely!

cooking zone and set the power setting for each zone to the maximum level for a short time.
If or symbol comes on the display after you switch on the hob for the first time, refer to "Troubleshooting".


1 Single cooking zone (180 mm) 1800 W
2 Single cooking zone (145 mm) 1200 W
4 Single cooking zone (180 mm) 1800 W
5 Single cooking zone (145 mm) 1200 W

1 To switch the appliance on / off.
2 To activate and deactivate Lock / Child Lock / Cleaning mode.
5 / To increase or decrease the power setting.
3 To select the cooking zone.
3 Control panel

the neighbouring cooking zones even if you are not using them.
The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
The indicators show the level of the residual heat for the cooking zones you are currently using. The indicators may also come on for
symbol lights up. Before using again,
you must set the cooking zone to .
Touch for 1 second to switch the appliance on / off.
The function switches off the appliance automatically if:
If cookware that is not suitable is
used, lights up on the display and after 2 minutes the indicator for the cooking zone deactivates.

To set the cooking zone touch the sensor
To override the function for only one cooking time:
field related to this zone. The display
highlights the heat setting indication ( ).
symbol comes on.
Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to deactivate the cooking zone.
, the function operates again.
OffSound Control (Deactivation and activation of the sounds)
You can lock the control panel and keep the cooking zones operating. It prevents an accidental change of the power setting.
Originally the sounds of the appliance are activated.
Use the function to clean the surface of the hob during the cooking session, if needed.
Activating and deactivating the sounds:
First set the power setting.
To start the function touch . The symbol
comes on for 4 seconds.
zone display comes on and on the
To stop the function touch . The power setting that you set before comes on.
right front zone display or comes on.
When you switch off the appliance, you also stop this function.
This function prevents an accidental operation of the appliance.
To activate the function:
When the function is set to you can hear the sounds only when:
To deactivate the function:
If there is a problem with electrical supply and the appliance switches off it does not keep previous settings.
set the power settings. Touch for 4
seconds. The symbol comes on.

Cooking zone Cookware diame‐
Left rear 125 - 145
Only use cookware which is suitable for induction hobs. The cookware must be made of a ferromagnetic material, such as:
Left front 145 - 180
Right rear 145 - 180
Right front 125 - 145
Do not use empty pots / pans or cookware with thin bases on the hob as it will not be able to monitor the temperature, or will turn off automatically if the temperature is too high. This may result in the damage of the cookware or the hob surface. If such a situation occurs, do not touch anything and wait for all components to cool down.
check for the symbol (usually stamped on the bottom of the cookware). You can also hold a magnet to the bottom. If it clings to the underside, the cookware will work on the induction hob.
To ensure optimum efficiency, always use pots and pans with a flat bottom that distributes the heat evenly. If the bottom is uneven, this will affect power and heat conduction.
If an error message appears, refer to "Troubleshooting".
When a cooking zone is active, it may hum briefly. This is characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance. The noise depends on the cookware used. If it causes considerable disturbance, it might help to change the cookware.
Minimum diameter of pot / pan base for the different cooking areas
To ensure that the hob operates properly, the cookware must have a suitable minimum diameter as well as cover one or more of the reference points indicated on the surface of the hob.
Always use the cooking zone that best corresponds to the diameter of the bottom of the cookware.
ter [mm]

Removing the residues and stubborn residues
Food containing sugar, plastics, or tin foil residues should be removed at once. A scraper is the best tool for cleaning the glass surface. It is not supplied with the appliance. Place a scraper on the hob surface at an angle and remove residues by sliding the blade over the surface. Clean the appliance using a damp cloth and some dish soap. Finally, wipe the glass surface dry with a clean cloth.
Limescale rings, water rings, fat splashes, or shiny metallic discolourations should be removed after the appliance has cooled down. Use only a specialised cleaner for glass ceramic or stainless steel.
Scratches or dark stains on the glass ceramic that cannot be removed do not affect the functioning of the appliance.

Problem Possible cause Remedy
You cannot switch on the appliance or operate it.
The appliance is not connec‐ ted to an electrical supply or it is connected incorrectly.
Check if the appliance is cor‐ rectly connected to the electri‐ cal supply. Ensure a correct in‐ stallation by calling an author‐ ised installer.
More than 10 seconds passed since you switched on the appliance.
Switch on the appliance again.
Child Lock or Lock is on . Deactivate Child Lock. Refer to " Child Lock" or " Lock".
Several symbols on the con‐ trol panel were touched at the same time.
Touch only one symbol at a time.
There is water or fat stains on the control panel.
Clean the control panel and wait for a few seconds before switching on again.
Residual heat indicator is not displaying anything.
The cooking zone was only on for a short time and is therefore not hot.
If the cooking zone is supposed to be hot, call the After Sales Service.
There is no signal when you touch panel symbols.
The signals are deactivated. Activate the signals. Refer to "OffSound Control".
and a number come on. There is an error in the hob. Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical system of the house.
Connect it again. If comes on again, speak to an author‐ ised installer.
If there is a fault, try to resolve it by following the troubleshooting guidelines.
If you operated the appliance wrongly, or the installation was not carried out by an authorised installer, the visit from the After Sales Service technician or dealer may not take place free of charge, even during the warranty period.
If the problem cannot be resolved, contact your IKEA store or the After Sales Service. You can find a full list of IKEA appointed contacts at the end of this user manual.

Country of origin © Inter IKEA Systems B.V. 1999
Typ 60 GAD DC AU 6.0kW
PNC 000 000 000 00 S No 220V-240V AC 50-60 Hz
IKEA of Sweden AB SE - 343 81 Älmhult
DGT 230 V
The graphic above serves to represent the rating plate of the appliance. The actual rating plate is located on the bottom of the casing. The serial number is specific to each product.
to assist you better by identifying precisely your hob, in case you need our assistance in the future. Thank you for your help!
Dear Customer, keep the additional rating plate with the user manual. This will allow us
Model identification GRUNDAD 404-670-82
Type of hob Built-In Hob
Number of cooking zones 4
Diameter of circular cook‐ ing zones (Ø)
Left front Left rear Right front Right rear
18.0 cm 14.5 cm 14.5 cm 18.0 cm
Energy consumption per cooking zone (EC electric cooking)
Left front Left rear Right front Right rear
183.8 Wh / kg 180.1 Wh / kg 181.0 Wh / kg 183.8 Wh / kg
Energy consumption of the hob (EC electric hob)
182.2 Wh / kg
EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
You can save energy during everyday cooking if you follow below hints.
Model 00000000 · Heating technology Induction

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
How long is the IKEA guarantee valid?
local regulations are applicable. Replaced parts become the property of IKEA.
This guarantee is valid for 5 years from the original date of purchase of your appliance at IKEA. The original sales receipt is required as proof of purchase. If service work is carried out under guarantee, this will not extend the guarantee period for the appliance.
What will IKEA do to correct the problem?
IKEA appointed service provider will examine the product and decide, at its sole discretion, if it is covered under this guarantee. If considered covered, IKEA service provider or its authorized service partner through its own service operations, will then, at its sole discretion, either repair the defective product or replace it with the same or a comparable product.
Who will execute the service?
IKEA service provider will provide the service through its own service operations or authorized service partner network.
What is not covered under this guarantee?
What does this guarantee cover?
The guarantee covers faults of the appliance, which have been caused by faulty construction or material faults from the date of purchase from IKEA. This guarantee applies to domestic use only. The exceptions are specified under the headline “What is not covered under this guarantee?” Within the guarantee period, the costs to remedy the fault e.g. repairs, parts, labour and travel will be covered, provided that the appliance is accessible for repair without special expenditure. On these conditions the EU guidelines (Nr. 99/44/EG) and the respective

How country law applies
The IKEA guarantee gives you specific legal rights, which covers or exceed local demands. However these conditions do not limit in any way consumer rights described in the local legislation.
For appliances which are purchased in one EU country and taken to another EU country, the services will be provided in the framework of the guarantee conditions normal in the new country. An obligation to carry out services in the framework of the guarantee exists only if the appliance complies and is installed in accordance with:
Please do not hesitate to contact IKEA After Sales Service to:
How to reach us if you need our service
Area of validity

Please refer to the last page of this manual for the full list of IKEA appointed contacts and relative national phone numbers.
In order to provide you with a quicker service, we recommend that you use the specific phone numbers listed at the end of this manual. Always refer to the numbers listed in the booklet of the specific appliance you need an assistance for. Before calling us, assure that you have to hand the IKEA article number (8 digit code) and the Serial Number (8 digit code that can be found on the rating plate) for the appliance of which you need our assistance.
SAVE THE SALES RECEIPT! It is your proof of purchase and required for the guarantee to apply. Note that the receipt reports also the IKEA article name and number (8 digit code) for each of the appliances you have purchased.
Do you need extra help?
For any additional questions not related to After Sales of your appliances, please contact our nearest IKEA store call centre. We recommend you read the appliance documentation carefully before contacting us.
Häufige Probleme, wahrscheinliche Ursachen und Lösungen.
| Problem | Mögliche Ursache | Abhilfe | |
|---|---|---|---|
| You cannot switch on the appliance or operate it. | The appliance is not connec‐ ted to an electrical supply or it is connected incorrectly. | Check if the appliance is cor‐ rectly connected to the electri‐ cal supply. Ensure a correct in‐ stallation by calling an author‐ ised installer. | p.16 |
| You cannot switch on the appliance or operate it. | More than 10 seconds passed since you switched on the appliance. | Switch on the appliance again. | p.16 |
| You cannot switch on the appliance or operate it. | Child Lock or Lock is on . | Deactivate Child Lock. Refer to " Child Lock" or " Lock". | p.16 |
| You cannot switch on the appliance or operate it. | Several symbols on the con‐ trol panel were touched at the same time. | Touch only one symbol at a time. | p.16 |
| You cannot switch on the appliance or operate it. | There is water or fat stains on the control panel. | Clean the control panel and wait for a few seconds before switching on again. | p.16 |
| Residual heat indicator is not displaying anything. | The cooking zone was only on for a short time and is therefore not hot. | If the cooking zone is supposed to be hot, call the After Sales Service. | p.16 |
| There is no signal when you touch panel symbols. | The signals are deactivated. | Activate the signals. Refer to "OffSound Control". | p.16 |
| and a number come on. | There is an error in the hob. | Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect it again. If comes on again, speak to an author‐ ised installer. | p.16 |
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.