Benutzeranleitung / Produktwartung IND-5000BT des Produzenten Bravo
Zur Seite of 30
USER MANUAL V1.0 Bravo View T echnology 20153 Paseo Del Prado W alnut, CA 91789 United States of America 909-869-0699 www .bravoview .com Thank Y ou for purchasing the IND-5000BT 1-DIN DVD/CD RECEIVER WITH 3.
1 Safety Precautions T o ensure safe driving, please adjust the volume to a safe & comfortable level in case of emergency situations. Never expose this unit, amplifier , and speakers to moisture or water for preventing electric sparks or fires.
2 Safety Information Contents Caution This product is a CLASS 1 LASER PRODUCT . Use of controls or adjust ments or performan ce of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself.
3 DVD-R/RW Compatibility It is possible to playback DVD-R/RW discs recorded with the video format and Video Recording format. Video CDs Featuring PBC Compatibility It is possible to playback Video CDs featuring PBC (playback control). WMA and MP3 Compatibility It is possible to playback WMA and MP3 files.
4 Panel Controls Power on/off: Press to turn on/off the unit. 16. - AMS: Auto preset (press more than 2 seconds)/ Preset scan (press birefly, in Radio mode) - Stop (in CD, MP3/WMA, and DVD video mode) - Terminate call (in BT mode) 17. AUX IN (3.5mm audio/video input) 18.
5 Remote Contr ols Press to turn on/off the unit. 1. Zoom (DVD/VCD only) 2. T itle (DVD only) 3. Power on/off 4. Setup 5. Menu cursor 6. Enter 7. Program 8. Digit area 9. Select Audio/Video Setting, then rotate the knob to adjust level. 10. V olume 1 1.
6 USB/SD/MMC/MP3 Playback 1. Load SD/MMC Card Insert the SD/MMC card into the slot, with the front side at right. The unit will play the music automatically and the LCD will show CARD. 2. T ake out SD/MMC Card Press SRC button and switch to non CARD mode, slightly press SD/MMC card, take out the card when it pops out.
7 Basic Operations T ur n on/off the Power 1. Press to turn on the unit. The unit goes back to the last status after power on. 2. Press again to power off. Mute When power on, press to cut the sound. Note: • Doing the operation above again or adjusting volume will release muting.
8 Rotary Knob Menu 1. Rotate the knob to adjust volume level. 2. Short press to access the Audio&VIDEO Setting menu. Each press the knob to change the AUDIO mode: EQ/Bas s/Middle/T reble/Balance/Fader , and rotate the knob to adjust level.
9 Rotary Knob Menu (sold separately) is connected to the CAMERA IN input on the back of the radio. T urn the rotary encoder to select “On” or “Off”. SUBWOOFER: ON/80HZ/120HZ/160HZ After connecting a subwoofer to the back of the unit, press / key to select a crossover frequency: OFF , 80, 120 or 160Hz.
10 LANGUAGE Setting OSD LANGUAGE: Select one language that you are familiar with to display system menu. AUDIO LANG: Select one dialogue language that you are familiar with when playing back DVD discs. Note: If the DVD disc has the audio file in the selected language, the dialogues you listened to will be in the selected language.
11 BT Setting P AIR: ON/OFF Set pairing ON/OFF . If select ON, to return to BT main menu. AUTO CONNECT : ON/OFF After disconnecting with your mobile phone, t h e b u i l t - i n b l u e t o o t h w i l l s e n d c o n n e c t i o n order automatically in 20s if you have set the ‘AUTO CONNECT’ to ‘ON’.
12 Radio Mode Accessing Radio Mode Press the SRC b ut t o n o n t h e f r o nt p a n el o r remote control to switch to the Radio source. 1. Source Indicator 2. Current Preset Channels 3. T ime/Clock 4. AM/FM Band 5. Radio Station Frequency 6. EQ Indicator Selecting a Band Press BAND once or more to select FM1 - FM2 - FM3 - AM1 - AM2.
13 Disc Mode Accessing Disc Mode If a dis c is alr ea dy i n th e di sc s lot but is n ot playing, press the SRC button on the front panel or on the remote control to switch to the DISC source. To play files from an SD or USB that is already inserted, choose the CARD or USB source.
14 Disc Mode Disc and File NOT Supported *.AAC, *.DLF , *.M3U, *.PLS, MP3 PRO files and files with DRM. Open session discs. Audio/Picture/V ideo File Playback When AUDIO/PICTURE/VIDEO file is played, Category/Folder/File list will be displayed on the screen, and file/folder name being played will be displayed on top.
15 Disc Mode only file names and folder names that can be entered and displayed. Using any other character will cause the file and folder names to be displayed incorrectly. The unit recognizes and plays only files with the MP3/ WMA extension. Note: A file name entered with characters not on the code list may not play correctly.
16 Disc Mode - RPT icon will appear on the display . - F o r V C D / C D : D i s p l a y a p p e a r s R P T O N E RPT ALL RP T OF F - F o r D V D : D i s p l a y a p p e a r s R P T C H A P T E R RP .
17 Bluetooth Mode Accessing Bluetooth Mode Press the SRC button on the front panel or remote control to switch to the Bluetooth source. Note: For your safety , avoid talking on the phone as much as possible while driving. Bluetooth is a wireless transmission way for short distance.
18 Bluetooth Mode remote control (if the options are available). LOG After pairing successfully, in the mode of Blue - tooth main menu, press key to select dial - ling history. 1. Missed Call Making a phone call using missed call history. Press / button to search for desired record on the list.
19 Bluetooth Mode General Notes for Bluetooth 1. For N7X, N9X, PHILIPS, Sony Ericssion, SAMSUNG mobile phones, during our test, after the mobile phones appear connection successful, the unit still appear waiting for pairing. At this time you must find the unit’s Bluetooth module name on the pairing list of your mobile phone and select it.
20 Device Connections Notes of connection • To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
21 Device Connections Wiring Diagram Audio in (A V 1) L(White) R(Red) (Black) Bluetooth microphone (Pink) Radio Antenna Reverse (Active high level input) Parking (Active low level input) Fuse 15A (Gre.
22 Installation Guide Preparation 1. Disconnect battery Before you begin, always disconnect the battery negative terminal. Note: If the unit is to be installed in a car equipped with an on-board drive or n avigation computer , do not disconnect the battery cable.
23 sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary to firmly secure the sleeve to the dashboard. 4. Place the unit in front of the dashboard opening so the wiring can be brought through the mounting sleeve.
24 4. Wire the new unit as outlined in the Mounting Sleeve Installation instructions. 5. Mount the new unit assembly to the dashboard or center console using the reverse procedure of step 1. Reset The RESET button is located behind the front panel and can only be accessed with the front panel opened.
25 T r oubleshooting If you suspect something is wrong, immediately switch power off. Immediately stop using it and call the store where you purchased it. Never try to repair the unit yourself because it is dangerous to do so. Problem Possible cause Solution General The unit will not switch on.
26 Car e and Maintenance DVD Player The following guidelines will help you extend the life of your DVD player: 1. When cleaning the vehicle interior , do not get water or cleaning fluids on the unit. 2. The DVD player will not operate properly in extreme hot/cold or under damp conditions.
27 Specifications General Power supply: 12VDC (1 1V -16V), T est voltage 14.4V , negative ground Maximum power output: 45W x 4 channels Continuous power output: 20W x 4 channels (4 10% T .H.D.) Suitable speaker impedance: 4-8ohm Pre-Amp output voltage: 4.
Limited Warranty Bravo View Technology warrants this product (including any accessory and/or cable) against defects in material or workmanship as follows: 1. Labor. For a period of 1 Year from original date of purchase, if the product is determined to be defective, Bravo View will repair or replace the product at no charge.
CLASS 1 LASER PRODUCT P.N.: 12707500XXXX.
Ein wichtiger Punkt beim Kauf des Geräts Bravo IND-5000BT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bravo IND-5000BT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bravo IND-5000BT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bravo IND-5000BT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bravo IND-5000BT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bravo IND-5000BT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bravo IND-5000BT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bravo IND-5000BT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bravo IND-5000BT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
