Benutzeranleitung / Produktwartung 760DI des Produzenten Boss
Zur Seite of 30
.
This radio is equipped with the most advanced "TOUCH SENSE P ANEL", so that it is easy and convenient to use while driving. Tips; Here are some tips to show you how easy it is to use this touch sense panel: Tips Using a very light touch on the radio panel will activate that feature.
1. INST ALLA TION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly . Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.
2. DET ACHABLE CONTROL P ANEL (D .C.P .) Removing The Detachable Control Panel (D.C.P .). 1. T urn the power off 2. Press the D .C.P . release button 3. Remove the D .C.P . P ANEL RELEASE BUTTON B A 2 Attaching the DCP CAUTION 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D .
3. WIRING DIAGRAM (20 PIN + ISO PLUG) 5 FUSE L-CH (See Figure 2) R-CH L-CH R-CH ISO CONNECTOR 20-PIN AUDIO/POWER HARNESS (See Figure 1) PIN(B8) GREEN/BLACK PIN(B1) VIOLET PIN(B4) GREY/BLACK PIN(B2) VI.
4. CONTROL P ANEL FUNCTION 6 OPERA TIONS: Mute Power Panel release button Audio Menu Enter Mode Encoder V olume Band File/Folder Search Sub-W AF TA PTY Copy ix-Bass PS AS ID3 iPod information iPod Sea.
7 INST ALLING iPod INTO THE BUIL T -IN iPod DOCKING Press down Never pull out this stick unless docking is completely release out. Step 1 Step 2 Step 3 Step 4 Press down the button as indicated below to unlock the iPod docking. Pull out Pull out the iPod docking as shown below .
Step 4 Step 3 Step 2 8 REMOVE iP od FROM THE BUIL T -IN iPod DOCKING Step 6 Step 7 Step 8 T o take out the iPod from the docking station, user can first detach the front panel, and repeat step 1 to step 8 to take out the iPod & return the iPod docking inside the unit’s cabinent.
9 This unit is equipped with iPod Ready function which allow end user to have direct control of the iPod on the front panel control button and display iPod song information on the unit's LCD display . Please read below for more details operation.
10 Song Select Press the File UP (>>) or File DOWN (<<) button for less than one second to skip to the next or previous song. Press and Hold File UP (>>) or File DOWN (<<) button for more than 3 seconds to fast forward or fast reverse of the current song.
5) SOURCE BUTTON (SRC) Press this button to remove the control panel. 6. BASIC OPERA TIONS 3) P ANEL RELEASE BUTTON (REL) 1) POWER ON/OFF BUTTON ( ) Press POWER button or any other button on the front of the radio to turn the unit on. Press POWER button again to turn the unit off.
Contrast The contrast level of the display is set at "CONTRAST 05" by default. Rotate the volume control to adjust the contrast level from 00 to 10. Clock Format This option allows selection of a 12 hour or 24 hour clock format. "CLK FORMA T 12H" is the Default setting.
13 8. AUDIO OPERA TION Press “ AUDIO button to access the Audio Menu. User can navigate thru the Audio Menu items by pressing the “ AUDIO” button repeatedly , or by pressing the T uning Up or T uning Down Button. Once the desired menu item appears on the display , adjust that option by using the Volume Up or Down button within 5 seconds.
Manual T uning Auto Seek T uning Press the Up T uning or Down T uning button for more than 3 seconds to move the radio frequency number up or down one step. Press the Up T uning or Down T uning button for less than 3 seconds to move to next station automatically .
RDS functions - - - - - - - - - AF Alternative Frequencies CT Clock Time EON Enchanced other Network PI Program identifications PS Program service name PTY Program T ype REG Regional Change T A T raffic Announcement TP T raffic program By pressing AF button < 3 seconds to select AF ON/OFF .
Up to 200 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section “Entering File and F older Names” below .
17 Writing Files into a Media When a media containing MP3/WMA data is loaded, the unit checks all data. If the media contains many folders or non-MP3/WMA files, MP3/WMA play will be delayed, it may take time for the unit to move to the next file, and searches may not be performed smoothly .
18 FILE/FOLDER PLA Y There are three different play methods as following: Press M2 button more than 3 seconds during playing MP3/WMA file for “intro play” all files of the current folder . Intro play should restart from the first song of the current folder , after all files in the current files have been intro-played.
12. USB OPERA TION The unit can support USB Host Function. It can playback MP3 and WMA Audio format which are stored into USB Memory Stick or USB interface Music Player . Please read below before you start the operation of USB HOST Function. Mode change to USB HOST Before remove the USB stick from the Front panel USB plug.
20 13. MEMORY CARD OPERA TION The unit can support playback MP3 and WMA Audio format which are stored into and Memory Card . Please read below before you start the operation of Memory Card.
21 14. MUSIC FILES TRANSFERRING Thanks for the most useful and convenient files transferring function of this unit, user can easily transfer music files between USB Stick, SD or MMC Memory card.
22 1) Never remove the USB Stick while recording or file transferring to USB Stick. It may damage the USB Stick and sometimes will caused the unit system lock up. 2) It is not recommended to insert USB stick while recording is under progress to other storage device.
23 15. MUSIC FILES ERASING Y ou can erase files from the USB Stick or Memory Card. Please read below for the details operation of this function: ERASABLE MEDIA USB Stick and Memory Card. ERASING MUSIC FILES ON THE MEDIA There are THREE different methods for erasing files; 1.
24 1) Do not switching mode of the unit during the Erasing 2) Do not turn off the Power of the unit during the Erasing 3) Do not switch the Ignition key off during the Erasing 4) Do not detach the front panel during the Erasing WARNING: Short Press the AUDIO to enter into the ERASE mode Once enter into the erase mode.
25 16. FILES MANAGER The advance “File Management.” System of this unit can help to well you organize all the music files just like a PC . Please read below for details: FOLDERS MANAGEMENT This unit will automatically self-create the below default folders onto any USB /SD / MMC media device, once these devices are inserted into the unit.
26 1 2 3 6 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 17. REMOTE FUNCTION(RDS +iPod) iPod KEY SYSTEM TUNER CD/MP3/WMA 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3 Short Press Long Press OPERA TI.
GENERAL AM/MW Power Supply Polarity Speaker impedance Power Output Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio DC 11 -14V Negative Ground 4 ohms 4 x 80W 87.5-108Mhz 87.5-107.9Mhz 10.7 MHz Better than 15dB at S/N 30 dB 25 dB at 1KHz 50 dB 18.
Write Error Read Error Memory Full No File The Media Device not able to copy or record by the unit. The Media Device not able to play file by the unit The media device memory is full not allow to copy No file Format supports for Playback on the file or Media Device Replace the file or Media Device.
4 10 R - 02 0 896.
Ein wichtiger Punkt beim Kauf des Geräts Boss 760DI (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Boss 760DI noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Boss 760DI - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Boss 760DI reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Boss 760DI erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Boss 760DI besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Boss 760DI verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Boss 760DI. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Boss 760DI gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
