
] QUICKSTART GUIDE ENGLISH ( 3 – 6 ) ] GUÍA DE INICIO RÁPIDO ESPAÑOL ( 7 – 10 ) ] GUIDE D’UTILISATION RAPIDE FRANÇAIS ( 11 – 14 ) ] GUIDA RAPIDA ITALIANO ( 15 – 18 ) ] KURZANLEITUNG DEUTSCH ( 19 – 22 )



BOX CONTENTS MP103USB Power cable Stereo RCA cable Quickstart Guide Safety & Warranty Information Booklet REGISTRATION Please go to http://www.numark.com to register your MP103USB. Registering your product ensures that we can keep you up-to-date with any new product developments and provide you with world-class technical support, should you run into any problems. QUICK SETUP 1. Make sure all items listed in the BOX CONTENTS section are included in the box. 2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT. 3. Study the connection diagram in this guide. 4. Place mixer in an appropriate position for operation. 5. Make sure all devices are turned off and all faders and gain knobs are set to “zero.” 6. Connect all stereo input sources as indicated in the diagram. 7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources. 8. Plug all devices into AC power. 9. Switch everything on in the following order:



5. FOLDER – Press this button to toggle between Folder View and File View. In Folder View, you can use the TRACK KNOB to scroll through all the available folders. When you have selected a folder, press the TRACK KNOB button to enter File View – the first file shown will be the first MP3 available in that folder. To return to Folder View, press the FOLDER button again. (While in Folder View, you can press and hold the FOLDER button at any time to exit Folder View without making any changes.)
Note: In both views, you are not restricted to viewing only folders or files on a single "directory level." Each view is simply a list of all available folder or files. This function provides a faster way of navigating your files, allowing you to jump to different groups of files within a folder but without requiring you to enter/exit multiple directory levels.
a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a new cue point,
rotate the JOG WHEEL then begin playback when you have determined the proper position. Press CUE to return to that cue point. b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the JOG WHEEL
clockwise temporarily speeds it up while rotating it counterclockwise slows it down. This is a useful tool for beat- matching. c) When the SEARCH button has been activated, rotating the JOG WHEEL will scan rapidly through the track. d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the audio of the
track, like a needle on a record. Note: When a track is paused, turn the JOG WHEEL to activate "stutter cue," allowing you to hear the current frame repeatedly. This is a good aid when trying to cue up a precise point in a track like a downbeat. 14. LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback. 15. LOOP OUT – Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While playing a loop, press LOOP OUT to release it from the loop and continue normal playback. 16. RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).




In dieser Anleitung genannte Seiten – Hersteller, Support und Downloads.
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.