DE
Makita logo
Offizielle Bedienungsanleitung

Makita UH 4520

44 Seiten·1.4 MB·Heckenschere·PDF·ENITJA
Makita UH 4520
Inhaltsverzeichnis 26 Abschnitte Thank you for purchasing a MAKITA product! · Table of contents · EU Conformity Declaration · Symbols · … AnzeigenAusblenden
Page 2 of the Makita UH 4520 user manual — Protective equipment
Seite 2 · Zum Vergrößern klicken
Seite 2
Makita UH 4520 — SAFETY PRECAUTIONS diagram (page 2)
Abb. 1
1. Hedge trimmer
2. Cutter
3. Sheath

Should one of the parts listed here be missing, please consult your sales agent!

4. Instruction Manual (not shown)

SAFETY PRECAUTIONS

General precautions

- In order to ensure safe operation, the operator must read this instruction manual to familiarize him or herself with the operation of the hedge trimmer. Users insufficiently informed will endanger themselves as well as others due to improper handling.

- Wear adequate hearing protection equipment (ear muffs, ear plugs, etc.). Octave brand analysis upon request.

- Work gloves of stout leather are part of the basic equip- ment of the hedge trimmer and must always be worn when working with it.

- First-time users should have an experienced hedge-trim- mer user show them how to use the trimmer.

- When using the trimmer always wear sturdy shoes with anti-skid soles.

- Lend the hedge trimmer only to persons who are experi- enced in the use of such machines. Always give the the instruction manual.

Starting operation

- Before starting work check to make sure that the trimmer is in good and safe working order. This is a must!

- Persons under 18 years of age must not be allowed to operate the hedge trimmer. Persons over the age of 16 years may, however, use the hedge trimmer for instruc- tional purposes as long as they are under the supervision of a qualified individual.

- Do not use the hedge trimmer in the rain or in wet or very damp conditions. The electric motor is not waterproof.

- Always pay the utmost attention when using the hedge trimmer!

- Do not use the hedge trimmer if it is wet or damp.

- Do not use the hedge trimmer near combustible gases or dust. The motor generates sparks. Explosion hazard!

- Use the hedge trimmer only if you are in good physical condition. If you are tired, your attention will be reduced. Be especially careful at the end of a working day. Perform all work calmly and carefully. The user is responsible for all damages to third parties.

- Check to make sure that the voltage and frequency of the power supply correspond to the specifications given on the indentification plate. Max. back-up fuse 16 A. We recommend the use of a residual-current-operated circuit breaker (ground-fault circuit interruptor) or an earth leakage current protector.

- Never use the trimmer when under the influence of alcohol, drugs or medication.

Protective equipment

- Make sure that no children or other persons are within 5 meters (17 feet) of the unit during operation. Watch out for animals.

- In order to prevent, eye, hand and foot injuries as well as hearing loss, always wear the protective clothing and gear described in the floowing when working with the hedge trimmer.

- The hedge trimmer must not be used unless fully assembled!

- Make sure you have a secure footing before starting operation.

- Clothing should be appropriate, i. e. snugly fitting but not so tight as to be a hindrance. Do not wear jewellery or clothing which could get caught on twigs and branches. If you have long hair, always wear a hairnet!

- Do not start the hedge trimmer without having a firm grip on both handles with both hands! The trimmer is designed for use by left- or right-handers, and can be used on both sides equally well.

- The protective glasses or goggles keep cut material out of your eyes and prevent eye injuries. Always wear eye protection when using the hedge trimmer!

Page 3 of the Makita UH 4520 user manual — NOTE
Seite 3 · Zum Vergrößern klicken
Seite 3

- NEVER affix the grip safeties in the down position!

- When carrying the hedge trimmer in a vehicle, make sure it is in a secure position. It should be transported only in the trunk or in a transport area separate from the driver.

- Operate the hedge trimmer only in the manner prescribed by the instruction manual.

- Store the hedge trimmer with the sheath on, in a dry room. Keep it out of reach of children. Never store the trimmer outdoors.

- Switch off the hedge trimmer immediately if you notice any change in its behaviour.

- Immediately unplug the mains plug if the power cord should become damaged or severed.

- Clean the hedge trimmer and especially the cutter after use, and before putting the trimmer into storage for extend- ed periods. Lightly oil the cutter and put on the sheath. The sheath supplied with the unit can be hung on the wall, providing a safe and practical way to store the hedge trimmer.

- Immediately switch off the motor and unplug the mains plug if the cutter should come into contact with a fence or other hard object. Check the cutter for damage.

- Before checking the cutter, taking care of faults, or removing material caught in the cutter, always switch off the trimmer and unplug the mains plug.

Maintenance

- Before taking breaks and before leaving the hedge trimmer unattended, always switch it off and unplug the mains plug. Place the trimmer in such a way that it cannot endanger anyone.

- Switch off the trimmer and disconnect and secure the mains plug before doing any maintenance work.

- Make especially sure the cutter is undamaged and in good condition.

Extension power cord

- Regularly inspect the power cord for damage to the insula- tion. If the power cord is damaged, disconnect the mains plug.

- Use only splash-proof extension cords that are approved for outdoor use and marked as such.

- When selecting an extension cord, give preference to cords in fluorescent or eye-catching colours.

- Regularly clean the trimmer.

- If the plastic housing is damaged, have the unit repaired by a qualified service technician immediately. Shock hazard! Danger of injury!

- The hedge trimmer is protectively insulated in accordance with VDE (German Electricians´ Association) Standard 0740 Class II, and can therefore be connected to plug sockets without ground contact.

Follow the accident-prevention instructions and recom- mendations of your trade association or insurer.

- Always work in such a way that the extension power cord is behind you!

Do not make any modifications to the hedge trimmer. Doing so will only endanger your safety.

- Always start near the power source and work away from it. This ensures that the extension cord stays behind the work area.

Perform only the maintenance and repair works described in the instruction manual. All other work must be carried out by MAKITA Service.

- The trimmer power cord must likewise always be behind the operator. Make sure that it does not get caught, or comes into contact with sharp objects. Route the cord in such a way that no persons can be endangered.

Use only original MAKITA spare parts and accessories.

Using other than original MAKITA parts or accessories brings a high risk of accidents. We cannot accept any responsibility for accidents and damage resulting from non- MAKITA parts and accesories which have not been ap- proved.

- Do not use any extension cord with a line cross-section of less than 3 x 1.5 mm2. When using a reel, make sure that the cord is completely unrolled. The cord length must not exceed 30 m / 100 ft!

First aid

For the event of a possible accident, please make sure that a first aid kit is always immediately available close by. Immedi- ately replace any items used from the first aid box.

Transportation and storage

- When moving the hedge trimmer to another location, including during work, always un- plug the mains plug.

When calling for help, give the following information:

- Never carry or transport the trimmer with the cutter running!

- Place of the accident

- Never grasp the cutter with your hands!

- Number of injured

- When transporting the hedge trimmer for more than short distances, always put on the sheath supplied with the unit.

- Kind of injuries

- Carry the trimmer only by the front handle. The cutter should be pointing backwards.

NOTE

Individuals with poor circulation who are exposed to excessive vibration may experience injury to blood vessels or the nervous system.

Vibration may cause the following symptoms to occur in the fingers, hands or wrists: ”Falling asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin colour or of the skin. If any of these symptoms occur, see a physician!

- What happened · - Your name!

Page 4 of the Makita UH 4520 user manual — Environmental protection information
Seite 4 · Zum Vergrößern klicken
Seite 4

Working technique

- Work only in good lighting and visibility.

- Do not use the trimmer to lift, lever, or sweep away cut material or other objects.

- Never work on an unstable surface. Pay attention to obstacles in the work area - risk of stumbling! Pay constant attention to good footing.

- Cut thick branches to length with pruning shears before trimming the hedge.

- Never work while standing on a ladder.

- Do not bend too far over while working.

- Do not start working until you have made sure that:

- Guide the trimmer away from your body, with the cutter pointing away and at a safe distance from your body.

a) No other persons or animals are within the working

area.

- Use the hedge trimmer only for trimming hedges! Do not use it for cutting grass or brash.

b) The trimmer operator can step back unhindered in the

event of an emergency.

- Always keep the ventilation slots unobstructed, to ensure proper cooling of the electric motor.

c) The ground is free of all foreign objects, brush, and

branches. The operator must have a sure footing (risk of stumbling).

- Do not allow the cutter to touch the ground when running. Foreign objects will damage the cutter and may lead to injury.

Tips on trimming hedges

The procedure described here can be used very often and makes working easier. If a hedge has to be cut back very substantially, it should be trimmed in two passes.

Makita UH 4520 — Tips on trimming hedges diagram (page 4)
Abb. 2 · Tips on trimming hedges
Makita UH 4520 — Tips on trimming hedges diagram (page 4)
Abb. 3 · Tips on trimming hedges

- First cut the hedge to the desired height (1). With practice, it is possible to remove cut material from the hedge with a swinging motion. To get a straight cut, stretch a string along the hedge at the desired height.

- Trim the hedge to a trapezoidal shape (about 10 cm / 4" in at the top for every 1 m / 3’3" of height), cutting from bottom to top (2). In this way you avoid cut material falling down into the area not yet cut.

Makita UH 4520 — Tips on trimming hedges diagram (page 4)
Abb. 4 · Tips on trimming hedges
Makita UH 4520 — Tips on trimming hedges diagram (page 4)
Abb. 5 · Tips on trimming hedges

- Round off the top edges of the hedge (3), and finally trim the bottom edges back somewhat (4).

The best times to trim hedges are:

Broad-leaf hedgesJune and October
Coniferous hedgesApril and August
Fast-growing hedgesAbout every 6 weeks starting in May

Environmental protection information

Do not use the hedge trimmer during times when people are likely to be resting.

Before trimming a hedge, check to make sure that no birds are nesting in it. If they are, wait until the young have left the nest before trimming near that part of the hedge.

Dispose of cut material in an environment-friendly way, or compost it.

Page 5 of the Makita UH 4520 user manual — Designation of components
Seite 5 · Zum Vergrößern klicken
Seite 5
Technical Data Technical DataUH 4520UH 5520UH 7020 Power consumption Watt550 Rated voltage V220…240~ Mains frequency Hz50…60 Rated current A2.5 Supply (back-up) fuse A16 Power-cord length cm30 Cutter length cm455570 Blade cycles (n) n/min o1500 Sound pressure level L at the workplace per EN 50144-1 1) dB (A) pA84,184,184,1 Sound power level L per EN 50144-1 1) dB (A) WA97,197,197,1 Vibration acceleration a per EN 50144-1 1) h,w - Bow-type handle at the front m/s2 - Grap handle at the rear m/s24.8 3.94.8 3.94.8 3.9 Overload protection TypeSlip clutch Weight kg3.84.04.2 Radio Interference suppression/EMCaccording to EMC guidelines 89/336/EWG and 92/31/EWG Protective insulationClass II (double insulation) Extension power cord (not included) TypeDIN 57282 / HO7RN-F L= max. 30 m, min. 3 x 1.5 mm2
Makita UH 4520 — Designation of components diagram (page 5)
Abb. 6 · Designation of components
1. measured at the highest number of revolutions

Designation of components

Makita UH 4520 — Designation of components diagram (page 5)
Abb. 7 · Designation of components
220…240 V~2.5 A 50 - 60 Hz550 W no 1500 1/min

1 Front handle

Page 6 of the Makita UH 4520 user manual — Periodic care and maintenance instructions
Seite 6 · Zum Vergrößern klicken
Seite 6
Makita UH 4520 — Checking the cutter brake diagram (page 6)
Abb. 8 · Checking the cutter brake

Checking the cutter brake

Check the cutter brake each time before starting work!

- Start the trimmer as described above.

- Grasp the front handle firmly with one hand. Hold the rear handle with the other hand.

- Depress and then release the rear handle grip safety (C/7). The cutter should stop instantly.

- Hook the extension cord (A/1) in the strain reliever (A/2).

MAINTENANCE

To ensure a long servicelife and to prevent any damage the maintenance work described in the following must be performed regularly. The product guarantee will be automatically invalidated if this maintenance is not carried out regularly and according to the instructions.

Makita UH 4520 — MAINTENANCE diagram (page 6)
Abb. 9

Always disconnect the power cord before doing any work on the hedge trimmer! Always wear protective gloves!

STOP

Cleaning and care of the cutter

- Connect the mains plug (B/3) with the extension power cord.

Check the cutter regularly for damage, and clean it with a suitable brush or cloth.

If cutting performance should become unsatisfactory after extensive use, contact a service center.

Makita UH 4520 — STOP diagram (page 6)
Abb. 10

Periodic care and maintenance instructions

  • Check the entire hedge trimmer for cracks and breakage. If there is any damage, immediately have the trimmer repaired by a qualified service technician.
  • Check the functioning of the on/off switches.
  • The ventilation slots must be unobstructed.
  • Check the power cord. If there is any damage, have it replaced at a qualified service center.

- Hold the front handle (C/4) with one hand, depressing the front grip safety (C/5).

  • Clean the entire trimmer.

- Grasp the rear handle (C/6) with the other hand and start the trimmer with the rear handle grip safety (C/7).

  • Clean and lightly oil the cutter.
  • Store the entire trimmer in a safe place in a dry room.

The motor will not run:

- No power supply, power cord defective, check fuse.

To switch off: Release one or both grip safeties. The trimmer will stop immediately.

The motor runs, but the cutter doesn´t move: Take the trimmer to a MAKITA service center.

Show 4 more labels / short text on this page
Before every use · After every use · Storage · Trouble shooting
Page 7 of the Makita UH 4520 user manual — Guarantee
Seite 7 · Zum Vergrößern klicken
Seite 7

Service

The maintenance and repair of modern hedge trimmers and their safety devices require qualified technical training and a workshop equipped with special tools and test instruments.

We therefore recommend that you consult a MAKITA service centre for all work not described in this instruction manual.

The MAKITA service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost- effective solutions and advise you in all matters.

Please contact your nearest service centre (list enclosed).

Spare parts

Reliable long-term operation, as well as the safety of your hedge trimmer, depend among other things on the quality of the spare parts used. Use only original MAKITA parts, marked

Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety.

Original spare parts and accessories can be obtained from your local dealer. He will also have the spare parts lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and parts innovations.

Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product guarantee.

Guarantee

MAKITA guarantees the highest quality and will therefore reimburse all costs for replacement of damaged parts resulting from material or production faults occurring within the guarantee period after purchase.

Please note that in some countries special guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the product.

Please note that we cannot accept any responsibility for damage caused by:

  • Failure to observe the instructions in the Instruction Manual.
  • Non-performance of the required maintenance and cleaning.
  • Normal wear and tear.
  • The use of unapproved extension power cords.
  • The use of force, improper use, misuse or accidents.
  • Overheating damage caused by blockage of the ventilation slots.
  • Work on the hedge trimmer by unskilled persons or inappropriate repairs.
  • Use of unsuitable spare parts or parts other than original MAKITA parts, insofar as they caused the damage.
  • Damage related to conditions arising from lease or rent contracts.

Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed by a MAKITA service centre.

Frage zu Makita UH 4520 stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Makita UH 4520

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Makita UH 4520 PDF-Anleitung

44 Seiten·1.4 MB·Heckenschere·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…