DE
Makita logo
Offizielle Bedienungsanleitung

Makita ML705

24 Seiten·963 KB·Sonstiges·PDF·ENJA
Makita ML705
Inhaltsverzeichnis 16 Abschnitte GB Rechargeable Grab Light Instruction manual · F Lampe torche rechargeable Manuel d’instructions · D Akku-Grifflicht Betriebsanleitung · I Torcia ricaricabile Istruzioni per l’uso · … AnzeigenAusblenden
Page 1 of the Makita ML705 user manual — GB Rechargeable Grab Light Instruction manual
Seite 1 · Zum Vergrößern klicken
Seite 1

GB Rechargeable Grab Light Instruction manual

F Lampe torche rechargeable Manuel d’instructions

D Akku-Grifflicht Betriebsanleitung

I Torcia ricaricabile Istruzioni per l’uso

NL Oplaadbare lamp Gebruiksaanwijzing

E Linterna recargable Manual de instrucciones

Makita ML705 — GB Rechargeable Grab Light Instruction manual diagram (page 1)
Abb. 1 · GB Rechargeable Grab Light Instruction manual
Page 2 of the Makita ML705 user manual — GB Rechargeable Grab Light Instruction manual
Seite 2 · Zum Vergrößern klicken
Seite 2
Makita ML705 — GB Rechargeable Grab Light Instruction manual diagram (page 2)
Abb. 2 · GB Rechargeable Grab Light Instruction manual
Makita ML705 — GB Rechargeable Grab Light Instruction manual diagram (page 2)
Abb. 3 · GB Rechargeable Grab Light Instruction manual
Makita ML705 — GB Rechargeable Grab Light Instruction manual diagram (page 2)
Abb. 4 · GB Rechargeable Grab Light Instruction manual
Makita ML705 — GB Rechargeable Grab Light Instruction manual diagram (page 2)
Abb. 5 · GB Rechargeable Grab Light Instruction manual
Page 3 of the Makita ML705 user manual — GB Rechargeable Grab Light Instruction manual
Seite 3 · Zum Vergrößern klicken
Seite 3
Page 3 of the Makita ML705 user manual — GB Rechargeable Grab Light Instruction manual
Page 4 of the Makita ML705 user manual — IMPORTANT SAFETY INSTRUCTIONS
Seite 4 · Zum Vergrößern klicken
Seite 4

ENGLISH

Explanation of general view

1. Charging light 2. Button 3. Battery cartridge 4. Switch
5. Light 6. Clip 7. C-shaped portion 8. Flexible leg
9. Raised portion 10. Hole of the clip

SPECIFICATIONS

ModelML705 Power sourceD.C 7.2 V LED1 W Operating timeApprox. 5 hours (BL7010) Charging timeApprox. 30 min (DC07SA) imensions (With battery cartridge Without flexible leg)115 mm (L) x 46 mm (W) x 40 mm (H) Net weight (With battery cartridge)0.24 Kg
  • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
  • Note: Specifications may differ from country to country.

Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use.

Do not expose battery to water or rain.

Read instruction manual.

Do not short batteries.

Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance).

Always recycle batteries.

This cordless worklight produces laser class 2 light radiation according to IEC 60825-1 ed. 1.2.-2001. This can lead to other persons being unintentionally blinded.

Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/ EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

DOUBLE INSULATION.

Ready to charge Charging.

IMPORTANT SAFETY INSTRUCTIONS

Delay charge (too hot battery)

READ ALL INSTRUCTIONS.

Defective battery.

1. Read this instruction manual and the charger instruction manual carefully before use. 2. This light is not waterproof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do not wash it in water.

Do not destroy battery by fire.

Indoor use only · Charging complete

Page 5 of the Makita ML705 user manual — FUNCTIONAL DESCRIPTION
Seite 5 · Zum Vergrößern klicken
Seite 5
3. A short-circuit can cause a large current flow, overheating, possible burns and even a breakdown. (1) Do not touch the inside of the light with tweezers,

source. Pull by plug rather than cord whenever disconnecting charger. 10. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. 11. Do not operate charger with damaged cord or plug - replace them immediately. 12. Do not operate or disassemble charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Incorrect use or reassembly may result in a risk of electric shock or fire. 13. The battery charger is not intended for use by young children or infirm persons without supervision. 14. Young children should be supervised to ensure that they do not play with the battery charger. 15. Do not charge battery cartridge when temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F). 16. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.

metal tools, etc. (2) Do not touch the battery terminals with any

conductive material. (3) Avoid storing the battery cartridge in a container

with any metal objects such as nails, coins, etc. 4. Never expose the battery cartridge to flames, fire or great heat. Breakage may cause release of injurious material. 5. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 6. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 7. Be careful not to drop, shake or strike battery. 8. When the tool is not in use, always switch off and remove the battery cartridge from the tool. 9. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). 10. Do not give the tool a shock by dropping, striking, etc. 11. Do not expose the light to eyes continuously. It may hurt them. 12. Do not cover or clog the lit tool with cloth or carton, etc. It may create a risk of fire. 13. Do not disassemble the charger or battery cartridge; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 14. If any problem develops, consult your nearest Makita Service Center or dealer. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service Center.

Charging (Fig. 1) Charge the battery cartridge with the Makita charger before use. 1. Plug the battery charger into the proper AC voltage source. The charging light will flash in green color. 2. Insert the battery cartridge so that the plus and minus terminals on the battery cartridge are on the same sides as their respective markings on the charger. 3. When the battery cartridge is inserted fully, the charging light will change from green to red and charging will begin. The charging light will remain lit steadily during charging. 4. When the charging light changes from red to green, the charging cycle is complete. 5. After charging, unplug the charger from the power source.

SAVE THESE INSTRUCTIONS.

  • NOTE:
  • The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer's batteries.
  • If you charge a battery cartridge from a just operated tool or a battery cartridge which has been exposed to direct sunlight or heat for a long time, the charging light may flash in red color. If this occurs, wait for a while. Charging will begin after the battery cartridge cools.
  • If the charging light flashes alternately in green and red, charging is not possible. The terminals on the charger or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged.

FUNCTIONAL DESCRIPTION

CAUTION: 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA rechargeable batteries. Other types of batteries may burst causing personal injury and damage. 4. Non-rechargeable batteries cannot be charged with this battery charger. 5. Use a power source with the voltage specified on the nameplate of the charger. 6. Do not charge the battery cartridge in presence of flammable liquids or gases. 7. Do not expose charger to rain or snow. 8. Never carry charger by cord or yank it to disconnect from receptacle. 9. After charging or before attempting any maintenance or cleaning, unplug the charger from the power

  • Installing or removing battery cartridge (Fig. 2)
  • Always switch off the tool before insertion or removal of the battery cartridge.
  • To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge.
Page 6 of the Makita ML705 user manual — Using flexible leg (Fig. 8, 9)
Seite 6 · Zum Vergrößern klicken
Seite 6
  • To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.
  • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
  • turn and drop before releasing your hand from the flash light.
  • The flexible leg is for use with the flash light only.
  • Do not use it for other application. Using for other application may cause the flash light damage, personal injuries etc.

MAINTENANCE

Lighting up the lamp (Fig. 3)

  • CAUTION:
  • Do not look in the light or see the source of light directly.
  • Push the switch to light up the light. To turn off, push the switch again.

ACCESSORIES

  • NOTE:
  • When remaining battery capacity becomes lower, light turns off automatically. So you should charge the battery cartridge soon.
  • Operating time may be shortened according to environments and battery conditions.
  • CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center.
  • Flexible leg
  • Battery Charger
  • Battery Cartridge

OPERATION

Clip (Fig. 4) User can carry the light with hands free by hooking the clip on a belt.

Attaching flexible leg (Fig. 5, 6 & 7) Slide the C-shaped portion of the flexible leg over the light in the direction of the arrow. Hold the flexible leg securely in place by fitting the raised portion of the flexible leg in the hole of the clip.

Using flexible leg (Fig. 8, 9)

  • CAUTION:
  • Do not wind the flexible leg over a part of body such as hand or arm to use the flash light. This may cause the tool to drop, resulting in the flash light damage, personal injuries etc.
  • Do no carry the flash light by flexible leg. This may cause the flash light to drop, resulting in the flash light damage, personal injuries etc.
  • Do not wind the flexible leg over moving objects such as bicycle to use the flash light. Vibration may cause the flash light to drop, resulting in the flash light damage, personal injuries etc.

By attaching the flexible leg to the light, the light can be set on or fixed at various locations for hands-free lighting. e.g. 1) The light can be set on the surface of a workbench or the like by standing the light on the flexible leg. e.g. 2) The light can be fixed by wrapping the flexible leg around a pipe, bar or the like.

  • NOTE:
  • Do not bend the flexible leg excessively. Doing that may cause flash light breakage.
  • When winding the flexible leg over a rod, make sure that it grabs securely to avoid its accidental

Frage zu Makita ML705 stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Makita ML705

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Makita ML705 PDF-Anleitung

24 Seiten·963 KB·Sonstiges·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…