
1 Frame 2 Base 3 Screw 4 Cover lock
5 Battery cover 6 Battery cartridge 7 Plug (the shape may differ from country to country)
8 Switch 9 Knob

Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
CAUTION: 1. When the luminaire is not in use, always switch off, and unplug / remove the battery cartridge from the luminaire. 2. Do not cover or clog the luminaire with cloth or carton, etc. Covering or clogging it may cause a flame. 3. Do not use the luminaire in damp or wet locations. Do not expose the luminaire to rain or snow. Do not wash it in water. 4. Do not use the luminaire in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. 5. Luminaire plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) luminaires. Unmodified plugs and matching outlets will reduce risk of electric shock.
Cd Ni-MH Li-ion

6. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the luminaire. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 8. If external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by authorized service center in order to avoid a hazard. 9. Do not look in the LED light or see the source of light directly.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive
The lamp was classified at risk Group 1. a) The lamp or lamp system is in excess of the Exempt Group and that the viewer related risk is dependent upon how the users install and use the product; b) The most restrictive optical radiation hazard and other optical radiation hazards in excess of Exempt Group. c) Proper assembly, installation, maintenance and safe use, including clear warnings concerning precautions to avoid possible exposure to hazardous optical radiation. d) Advice on safe operation procedures and warnings concerning reasonably foreseeable malpractices, malfunctions and hazardous failure modes. e) NOTICE: UV and IR emitted from this product. f) WARNING: IR emitted from this product. g) CAUTION: Possibly hazardous optical radiation emitted from this product. h) Minimize exposure to eyes or skin. Use appropriate shielding. i) Use appropriate shielding or eye protection. j) Do not stare at operating lamp. May be harmful to the eyes. k) Eye or skin irritation may result from exposure. Avoid eye exposure.
material. (2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. 6. Do not store the luminaire and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). 7. Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 8. Be careful not to drop or strike battery. 9. Do not use a damaged battery. 10. Follow your local regulations relating to disposal of battery.
Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop luminaire operation and charge the battery cartridge when you notice less luminaire power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. 4. Charge the battery cartridge once in every six months if you do not use it for a long period of time. Save all warnings and instructions for future reference.
Battery luminaire use and care 1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery cartridge may create a risk of fire when used with another battery cartridge. 2. Use luminaires only with specifically designated battery cartridges. Use of any other battery cartridges may create a risk of injury and fire. 3. When the battery cartridge is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

OPERATION
Assembling the frame and the base (Fig. 1) Assemble the worklight as follows: 1. Remove the screws. 2. Insert the legs of the frame into the base. 3. Align the holes of the frame and the base. 4. Tighten them with screws.
Adjusting the angle of the worklight (Fig. 6) Loosen the knobs on the both side. Adjust the angle of the worklight. Then tighten the knobs again.
You can put the worklight on the tripod or vise to facilitate the operation.
Use with battery:
MAINTENANCE
Only maintenance work described in this instruction manual may be performed by the user. Any other work must be carried out by Makita authorized service centers.
To install the battery cartridge, release the cover lock, and open the battery cover. And insert the battery cartridge. Align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. Then close the battery cover. (Fig. 2)
Cleaning From time to time wipe off the outside (luminaire body) of the luminaire using a cloth dampened in soapy water.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita authorized service centers, always using Makita replacement parts.
To remove the battery cartridge, slide it from the luminaire while sliding the button on the front of the cartridge.
Turning on LED light (Fig. 4) Press the switch once, the light shines brightly (high mode). Press the switch again, the light shines mildly (low mode). To turn off the light, press the switch once again.
Battery protection system (Fig. 5) The luminaire is equipped with a battery protection system to extend battery life. When the battery becomes low, the LED lights go out except one LED (the one on the second line center). Then, after approximately five to ten minutes later, the system automatically cuts off power.
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.