Benutzeranleitung / Produktwartung MP35 des Produzenten Blaupunkt
Zur Seite of 29
Radio / CD / MP3 http://www .blaupunkt.com Key W est MP35 7 645 280 510 Monterrey MP35 7 645 485 510 Syracuse MP35 7 645 480 510 Operating instructions.
2 Open here.
3 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS 12 3 5 2 10 8 1 4 11 6 7 9.
4 1 Button to switch the unit on/off and to mute the unit. 2 button to open and release the control panel. 3 V olume control. 4 Short press: BND button, to se- lect the FM memory bank and the AM waveband, source selection to radio mode. Long press: TS , to start the T ravelstore function.
5 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS CO NTENTS Notes and accessories ................ 6 Road safety ........................................ 6 Installation .......................................... 6 Accessories ..................................
6 Note s and acce ssories Thank you for deciding to purchase a Blaupunkt product. We hope you enjoy using this new piece of equipment. Before using the device for the first time, please read these instructions careful- ly . The Blaupunkt editors are constant- ly working on making the operating in- structions clearer and easier to under- stand.
7 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS Detac hable c ontrol panel T heft prot ection As a way of protecting your equipment against theft, the unit is equipped with a detachable control panel (release pan- el). Without this control panel, the car radio is worthless to a thief.
8 SWIT CHI NG ON/ OF F DET A C HAB LE CO NTROL P AN E L Off timer After opening the control panel, the unit will switch off after a pre-adjusted time between 0 to 30 seconds. ➮ Press the MENU button 7 . ➮ Press the or button 6 repeat- edly until “ OFF TIMER ” appears in the display .
9 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS ADJ U STIN G TH E V O LU M E Switching on by insert ing a CD If the unit is switched off and there is no CD inserted in the drive, ➮ press the button 2 . The release panel opens. ➮ Gently insert the CD with the print- ed side uppermost into the drive until you feel some resistance.
10 ADJ U STIN G TH E V OLU M E Instant aneous volume reduct ion ( mute) This feature allows you to instantane- ously reduce (mute) the volume to a lev- el preset by you. ➮ Briefly press button 1 . “ MUTE ” appears in the display . To restore the volume, ➮ press button 1 again.
11 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS RAD IO MODE Radio mode Swit ching t o radio mode If you are listening to CD/MP3, CD changer or AUX mode, ➮ press the BND•TS 4 button or ➮ press the SRC button ; repeated- ly until “ FM ” or “ AM ” ( “ MW ” ) ap- pears in the display .
12 RA D IO MO DE ➮ Press the MENU button 7 . ➮ Press the or button 6 repeat- edly until “ SENS HI ” or “ SENS LO ” appears in the display . “ SENS HI ” means that the tuner is highly sensitive. “ SENS LO ” means it is set to the lower sensitivity setting.
13 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS RA D IO MO DE Start ing SCAN ➮ Keep the MENU button 7 pressed until the scan process starts. “ SCAN ” appears briefly in the display followed by the current frequency (which flashes). Stopping S CAN and continuing listening t o a stat ion ➮ Press the MENU button 7 .
14 CD MOD E Y ou must not hinder or assist the drive as it draws in the CD. ➮ Gently close the control panel whilst exerting a little pressure until you feel it clicks into place. CD playback begins. Note: ● The unit will remain off if the igni- tion is off.
15 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS CD MOD E “ RPT OFF ” appears briefly in the dis- play and the RPT symbol disappears. Normal playback is then continued. Pausing playback ( P AUS E) ➮ Press button 3 9 . “ P AUSE ” appears in the display .
16 M P3 MO DE MP 3 mode Y ou can also use this car radio for play- ing CD-Rs and CD-RWs containing MP3 music files. Preparing the M P3- CD The various combinations of CD burn- ers, CD burning software and CD blanks may lead to problems arising with the ability to play certain CDs.
17 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS M P3 MO DE ● Do not use “ mixed ” CDs containing both non-MP3 data and MP3 files. The unit will only select MP3 files during playback. ● Do not use mix-mode CDs contain- ing both audio tracks and MP3 files.
18 M P3 MO DE Stopping S CAN and continuing playback ➮ Briefly press the MENU button 7 . The currently scanned track/file will then continue to be played normally . Repeat ing individual t rack/file or whole directories ( R E PE A T) To play the current track/file repeatedly , ➮ briefly press button 4 RPT 9 .
19 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS M P3 MO DE Note: ● Artist, song and album names are part of the ID3 tag version 1 and will not be shown if they are not available on the MP3 files. To configure the MP3 scrolling texts, ➮ Press the MENU button 7 .
20 CD C HANG E R MO DE Changing the display 5 options are available: ● T rack number and play time ● T rack number and clock ● CD number and track number ● CD number and clock ● CD number and play time ➮ Press the DIS button : once or several times for longer than two seconds until the required display appears.
21 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS CL O CK - Time Briefly displaying the t ime ➮ To display the time, briefly press the DIS button : . Set t ing t he t ime ➮ To set the time, press the MENU button 7 . ➮ Press the or button 6 repeat- edly until “ CLOCK SET ” appears in the display .
22 Tone and volume distribut ion set tings Y ou can adjust the tone settings (bass and treble) separately for each source (radio, CD (MP3), CD changer or AUX and phone). Y ou can boost or cut the bass and tre- ble in ± seven steps. Y ou can select one of four possible cen- tre frequencies in order to further opti- mise the sound.
23 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS Set ting t he front/back volume distribut ion ( fader) ➮ To set the front/back volume distri- bution (fader), press the AUDIO button 5 . “ BASS ” appears in the display . ➮ Press the button 6 repeatedly until “ FADER ” appears in the dis- play .
24 X- BA S S X-Bass means increased bass at low volumes. Y ou can set the X-Bass in steps rang- ing from OFF to three. Three means that the X-Bass boost is set to maximum and OFF means that X-Bass is switched off. In addition, you can choose between a centre frequency of 50 Hz or 100 Hz.
25 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS Adjusting t he brightne ss (d immer) The display brightness will change when the headlights are turned on/off if your car sound system is connected as de- scribed in the installation instructions and your vehicle is equipped with the appropriate connections.
26 DIS P LA Y CO L OUR Select ing the colour of t he display illumination using t he colour scan ( Syracuse / Mont errey M P35) Y ou can select the colour of the display illumination during the colour scan. The display shows all the possible colour variations that are available in the RGB spectrum.
27 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS EXTE R NAL A U DIO SOU R C E S Entering t he power- on message After you switch on your device, the system displays a short message in the display . The factory default setting is the “BLAUPUNKT” text. Instead of this you can enter your own text up to 9 charac- ters long.
28 Specific at ions Amplifier Output power: 18W RMS x 4ch @ 14.4V @ 4ohm @ 1% THD Tuner Frequency ranges USA: FM: 87.5 - 107.9 MHz (200 kHz step) AM: 530 - 1710 kHz (10 kHz step) Frequency ranges Europe: FM: 87.5 - 108 MHz (100 kHz step auto/50 kHz manual) AM: 531 - 1602 kHz (9 kHz step) Frequency ranges Thailand: FM: 87.
Ser vice numb ers / Numéros du servic e après-vent e / Números de ser vicio / Número de ser viço Country: Phone: Fax: WWW: Germany (D) 0180-5000225 05121-49 4002 http://www .
Ein wichtiger Punkt beim Kauf des Geräts Blaupunkt MP35 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Blaupunkt MP35 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Blaupunkt MP35 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Blaupunkt MP35 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Blaupunkt MP35 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Blaupunkt MP35 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Blaupunkt MP35 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Blaupunkt MP35. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Blaupunkt MP35 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
