Benutzeranleitung / Produktwartung ES700 des Produzenten Acroprint
Zur Seite of 48
ES700 USER’ S MANUAL.
W ARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
ES700 User’ s Manual i T able of Contents Alert Definitions .............................................................................. iii Precautions ..................................................................................... iv Intr oduction .
ii Reset Factory Default Settings ...................................................... 30 W all Mounting .................................................................................. 32 Replacing the Ribbon Cassette ............................
ES700 User’ s Manual iii A LERT D EFINITIONS For your safety and the protection of the unit, th e following alerts are used througho ut this manual. R EADER A LERT M EANING Alerts you to supplementary information. Alerts you to helpful tips (information given as a guide to action).
iv P RECAUT IONS A LERT D ESCRIPTION • Insert the power plug as far as it will go. Improper insertion of the plu g may result in fire or electric shock. • Do not disassemble the unit. High voltage is present inside that may lead to an electric shock.
ES700 User’ s Manual 1 I NTRODUCTION Thank you for purchasing an Acroprint Model ES 700 T ime Recorder . W e are confident this unit will give you full sa tisfaction. Items such as th e time and date are preset at the factory . After plugging in the power cord to the wall outlet, this unit can be used.
2 E QUIPM ENT Unpack the unit and check its contents to ens u re that the time recorder unit and all accessories shown below are included. If equipment has been dama ged in transit, report the extent of damage to the transportation company and to Acroprint.
ES700 User’ s Manual 3 Open and Close Unit Open Unit Insert the key into the lock on cover of the unit. T u rn the key in the clockwis e position to unlock the unit. Remove the cover . Refer to Open Unit below . Open Unit When you open the unit for the fi rst time, you must remove the Pr o tective Pad and Cardboard Insert .
4 Remove Pr otective Pad and Car dboard Insert/Plug A C Adapter into Unit Close Unit Replace the cover . Insert the key into the lock on the cover of the unit. T u rn the key in the counter-clockwise position to lock the uni t. Refer to Close Unit be low .
ES700 User’ s Manual 5 P ower the Unit/Print P ositioning Plug the transformer into the AC outlet. Insert a card to get a sample print. Re fer to Power the Unit below . Po w e r t h e U n i t Print position from the card edge is adjustable by pressing an d s liding the print position button located on the right outside bottom of the unit.
6 I MPORTANT T HING S TO R EMEMBE R W HEN U SING T HE ES700 Y ou must open the unit to make changes to the settings. After each use, replace the cover and lock it. Refer to “Open and Close Unit” on page 3 . After performing each procedure on the unit, remember to press SET until the unit returns to normal operation mode.
ES700 User’ s Manual 7 Q UIC K S TART Atomic Synchr onization The clock receives the NIST WW VB Signal which will automatically set the time and date. Refer to Atomic Synchronization T ime Zones on page 8 . For more information about the WWVB Radio Signal (Atomic Signal), visit NIST’ s website at: www .
8 Atomic Synchr onization Time Zones Default = ES-05 D ISPLAY T IME Z ONE D ESCRIPTION 12 11 10 09 08 07 06 05 04 03 02 01 00 Greenwich -01 -02 -03 -04 Atlantic St andard T ime ES-05 (Default) Eastern.
ES700 User’ s Manual 9 P R OGRAM THE T IME R ECOR DER Press SELECT . The unit changes into the program mode showing S on the display positioned under the "TIME" mark. Time Recorder Men u Time Recorder Func tion Buttons Most of the procedures in this manual are performed from the T ime Recorder menu.
10 S ETTINGS Time Example : Change the time from 9:08 AM to 10:09 AM. 1. Press SE LECT until the S is under the "TIME" mark. 2. "Hour" flashes. Change Hour 1. Press CHAN GE until the Hour is " 10 ". 2. Press SE T . 3. Th e flashing changes from " Hour" to "Minute".
ES700 User’ s Manu al 11 Date Example : Change the date from September 20, 2007 to October 21, 2008. 1. Press SE LECT until the S is under the "DA TE" mark. 2. "Y ear" flashes. Change Y ear 1. Press CHAN GE until the Y ear is " 08 ".
12 Change Date 1. Press CHAN GE until the Date is " 21 ". 2. Press SE T . 12/24 Hour Format Example : Change the hour format from 12 hour format to 24 hour format. 1. Press SE LECT until the S is under the "HOUR" mark. 2. The flash ing digit indicates "Hour Disp lay Format Options".
ES700 User’ s Manu al 13 Print Order Example : Set the print order to "Month, Date, Y ear , Hour , Minute". 1. Press SE LECT until the S is under the "PRINT ORDER" mark. 2. The flash ing digit indicat es "Print Order Options".
14 Print Or der Options Y ear Digit Change Y ear Digit If you have selected the unit to print the year , this allows you to choose the number of digits in the year (two or four). Example : Change the Y ear imprint to 4 digits. 1. Press SE LECT until the S is under the "YEAR DIGIT" mark.
ES700 User’ s Manu al 15 3. In this example, press CHANGE until the option is " 2 " (4 Digits ). Refer to Y ear Digit Options below . 4. Press SE T . Y ear Digit Options Hour/Minute Change Hour/Min ute Example : Set the "Hour" and "Minute" to 24 Hour and 1/100 Min.
16 5. The flash ing digit indicates from "Hour" to "Minute". 6. In this example, press CHANGE until the option is " 2 " (1/100 Min.). Refer to T ype of Minute Options below . 7. Press SE T . T ype of M inute Option s O PTION T YPE OF M I NUTE P RINT E XAMPLE 1 1/60 Min JAN 31 2008 10:10 2 1/100 Min JAN 31 2008 10.
ES700 User’ s Manu al 17 Leading Zer o Change Leading Zero Example : Set the Leading Zero to "ZERO Di sabled". 1. Press SE LECT until the S is under the "LEADING ZERO" mark. 2. The flash ing digit indicat es "Leading Zero Options".
18 Preset Comments Example : Change the comment to "SENT". 1. Press SE LECT until the S is under the "COMMENT" mark. 2. The flash ing digit indi cates "Comment Options". Change Comment Options 1. In this example, press CHANGE until the option is " 2 " (SENT).
ES700 User’ s Manu al 19 Language This setting is available if you select "Month", "Day of the W eek", or "Comment" in previous "PRINT ORDER". Example : Change the print language to French. 1. Press SE LECT until the X is beside the "LANGUAGE" mark.
20 Print Length The print length default is 4. Y ou may select from six (1-6) font sizes (refer to Print Length Examples (1-6) below). Print Length Examples (1-6) Example : Change the print length from the 4 to 2. 1. Press SE LECT until the X is beside the "PRINT LENG TH" mark.
ES700 User’ s Manu al 21 Print Method Example : Change the print direction to "Left" and the print activation to "Manual". 1. Press SELECT until the T is above the "PRINT DIRECTION/PRINT ACTIV A TION" mark. 2. The flash ing digit indicates "Print Direction Options".
22 Change Print Activation 1. In this example, press CHANGE until the option is " 3 " (Manual). Refer to Print Activation Options below . 2. Press SE T . Print Activation Options Press Push Bar O PTION P RINT M ETHOD O PTIONS 1 Automatic – Allows you to print by inserting a card or piece of paper .
ES700 User’ s Manu al 23 Daylight Sa ving Time (DST) DST begins on the second Sunday in March and ends on the firs t Sunday in November . Refer to DST below . At 2:00 AM on the first day of DST , the cloc k automatically gains one hour to show 3:00 AM.
24 Manually Set ting DST Example: Start Date – Sunday , March 9, 2008 End Date – Sunday , November 2, 2008 In this example, the unit remembers the S tart Date as the second Sunday in March and the End Date as the first Sunday in Nove mber . Once the un it i s set, it automatically updates the settings every year thereafter .
ES700 User’ s Manu al 25 2. Press SE T . 3. The flashing changes from "Y ear" to "Month". Change the Mont h 1. In this example, press CHANGE until the month is " 3 " (March). Refer to DST on page 23 . 2. Press SE T . 3.
26 Change the Date 1. In this example, press CHANGE until the date is " 09 ". Refer to DST on page 23 . 2. Press SE T . 3. The "Starting Date" of the display ch anges from flashing to steady and the S mark is displayed under "SU".
ES700 User’ s Manu al 27 Change the Mont h 1. In this example, press CH ANGE until the month is " 11 " (November). Refer to DST on page 23 . 2. Press SE T . 3. Th e flashing changes from " Month" to "Date" . Change the Date 1.
28 2. The first two digits flash. Change the First T wo Digits 1. In this example, press CHANGE until the first two digits are " 12 ". 2. Press SE T . 3. The flashing changes to the last two digits. Change the Last T wo Digits 1. In this example, press CHANGE until the last two digits are " 34 ".
ES700 User’ s Manu al 29 Enter P asswor d 1. Press SE LECT twice. 2. Th e numbers "9999" are disp layed and the first two digits flash. Set the First T wo Digits 1. In this example, press CHANGE until the first two digits are " 12 ".
30 R ESET F AC TORY D EFAUL T S ETTINGS Press the reset switch with a pointed object to re turn all settings to the factory default settings. Refer to Press Reset Button below .
ES700 User’ s Manu al 31 Factory Default Settings F EATURE F ACTO R Y D EFAULT S ETTINGS T ime Defa ult = 8:00 AM Date Default = 01/01/2008 12/24 Hour Format Default = 1 (12 ho urs format, AM/PM) Print Order Default = 1 (M.
32 W ALL M OUNTING 1. Install the supplied wall-mount screws by using the template. Refer to Install W all-Mount Screws below . Install W all-Mount Screws 2. Open the unit. Refer to “Open Unit” on page 3 . 3. Hang the unit on the wall and install W all Mount Brackets.
ES700 User’ s Manu al 33 R EPLACIN G THE R IBBON C ASSETTE 1. Open the unit. Refer to “Open Unit” on page 3 . 2. Hold the ribbon cassette by its tab and pull th e ribbon cassette straight out to remove it. Refer to Remove Ribbon Cassette below .
34 4. Install the ribbon cassette insi de the unit as shown. Refer to Install Ribbon Cassette below . Push the ribbon cassette until it snaps into positi on. Install Ribbon Cassette Install Ribbon Cassette Between Print Head and Ribbon Mask T urning the knob on the ribbo n cassette may make installation easier .
ES700 User’ s Manu al 35 5. Turn the knob of the ribbon cassette in the direction of the arrow to tighten the ribbon . Refer to Tighten Ribbon Cassette below .
36 T ROUB LESHOOTING Error No. Appears Other Failures E RR OR N O .E RROR C ONTENTS C ORRE CTIVE A CTION E-00 CPU error Contact Acroprint at (800) 334-7190 (USA). E-01 The remaining life of lithium battery for memory back-up is short. E-05 The card is not inserted in the T ime Recorder properly .
ES700 User’ s Manu al 37 S PECIFIC ATIONS Clock Accuracy Monthly accuracy ± 15 sec. (at ordinary temperatures) Calendar Y ear up to 2099. Automatically adjusted to leap years, 31-day months and months with 30 or f ewer days, and the days of the week.
.
Cut Here Product Registration Card Mail, Fax to 919.850.0720, or Register Online at www. acroprint.com ES700 Model No. Serial No. First Name Last Name T itle Company Name Address C i t y S t a t e Z i.
.
.
5640 Depar ture Drive Raleigh, NC 27616 USA 919.872.5800 800.334.7190 (in USA) 919.850.0720 (F ax) www .acroprint.com sales@acroprint.com P/N 06-0365-000 Rev .
Ein wichtiger Punkt beim Kauf des Geräts Acroprint ES700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Acroprint ES700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Acroprint ES700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Acroprint ES700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Acroprint ES700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Acroprint ES700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Acroprint ES700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Acroprint ES700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Acroprint ES700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
