Benutzeranleitung / Produktwartung CAPRICE 600 des Produzenten Binatone
Zur Seite of 34
1.
2.
3.
2. Installation 1. Locating the Base unit The Base unit should be placed on a level surface, in a position where: the mains adapter plug will reach an easily accessible 230-V AC switch mains supply socket - never try to lengthen the mains power cable .
3. Desk/W all mount installation 5 T o place the Caprice 600 on a desk, connect the stand to the bottom of the phone in the slots near the ringer cover as shown below . Desk Mount Insert the rigid clips of the stand into the slots on the bottom of the phone (near the ringer cover).
6 Desk/W all mount installation continue ... Insert the rigid clips of the stand into the slots on the bottom of the phone (near the battery cover). Press down firmly until the flexible clips clicks into place. T o remove the stand , ( 1 ) pinch the flexible clips, ( 2 ) pull back the stand, and then (3) slide up and forward as shown below .
7 4. Setting up the Caprice 600 The following section details how to set up your telephone. Press the MENU button to enter the Options menu and then use the UP or DOWN buttons to cycle through the fol.
Setting up continue... 8 4 Press UP or DOWN button to set the year . 5 Press MENU button to confirm. Ö The ‘month’ icon will be blinking. 6 Press UP or DOWN button to set the month. 7 Press MENU button to confirm. Ö The ‘date’ icon will be blinking.
Setting up continue... 9 5 Press MENU button to confirm. 6 Continue with programming, or press EXIT button to return to standby mode. Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
Setting up continue... 10 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. T o set the number of rings before the machine answers a call; 1 Press MENU button.
Setting up continue... 11 5 Press MENU button to confirm. Ö The second digit of the code will be blinking. 6 Press UP or DOWN button to set the second digit of the REMOTE ACCESS code. 7 Press MENU button to confirm. Ö The third digit of the code will be blinking.
12 When the phone rings; Lift the handset or press SPEAKERPHONE button on the Base unit. Ö The display shows the duration of the call in minutes and seconds . T o answer a call During a call; Adjust the volume of the speakerphone to your comfortable volume level using the SPEAKERPHONE volume switch located at the right side of the Base unit.
13 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 6. Outgoing call record The telephone remembers the last 10 outgoing calls .
14 1 When viewing the Outgoing call records, press UP or DOWN button to find the record you wish to store. 2 When the record is displayed, press BOOK button.
15 name and the search will jump to the first entry in the Phonebook beginning with that letter . 5 Press UP or DOWN button to scroll through the other records. 6 Press EXIT button repeatedly to return to standby mode or wait until the program times out.
Phonebook continue... 16 7 Press BOOK button to confirm. 8 Press EXIT button repeatedly to return to standby mode or wait until the program times out. Binatone Help Line - 0845 345 9677 Binatone Help .
17 Phonebook continue... 1 When viewing the Phonebook records, press UP or DOWN button to find the record you wish to edit. 2 When the record is displayed, press ERASE button. Ö The display prompts DELETE? DELETE? DELETE? DELETE? DELETE? 3 Press ERASE button again to confirm.
18 The place origin of the Caller Display record will display a special network message as: Message Significant WITHHELD WITHHELD WITHHELD WITHHELD WITHHELD The caller hides his number . UNAVAILABLE UNAVAILABLE UNAVAILABLE UNAVAILABLE UNAVAILABLE The caller ’s number is out of the network area.
19 Caller Displa y operation continue... When the Caller Display record is displayed; Press DIAL button. Ö The phone automatically dials the displayed record. T o return a call from the Caller ’s list When the Caller Display record is displayed; 1 Press ERASE button.
9. Answ ering Machine system 20 An OGM is the announcement callers will hear when the machine answers a call. The Caprice 600 has two pre-recorded announcements available if you choose not to record your own OGMs. OGM1 - this invites callers to leave a message after the tone.
1 After setting the OGM1, briefly press EXIT/ ON-OFF button again. Y ou will hear , “ Announcement 2.” 2 Press and hold OGM button until you hear a ‘beep.’ Ö The display shows OGM RECORDING OGM RECORDING OGM RECORDING OGM RECORDING OGM RECORDING and the message counter starts to count.
Answering Machine System continue... Y ou can record a memo directly into the machine. The length of the memo message recording depends on the MESSAGE LENGTH setting, see page 9. The memo message will be played back together with any messages from callers.
Answering Machine System continue... 3 Press PLAY/P AUSE button again to restar t message playback, otherwise it will restart automatically after a 30-second pause. 4 After playing all new messages, press PLAY/ P AUSE button again. The system will play all of its messages/memos.
Answering Machine System continue... 24 T o delete the current incoming message; 1 During message playback, press ERASE button. Ö The display prompts DELETE? DELETE? DELETE? DELETE? DELETE? . 2 Press ERASE button again to confirm. Ö After the erasure is complete, the numeric order of the remaining messages will be rearranged.
T o go back to the default OGM Answering Machine System continue... 25 If you no longer want callers to hear the OGMs that you have recorded, you can delete them and revert to the pre-recorded defaults as follows: 1 Make sure the machine is switched on.
1 Using a tone dialing phone, dial your home phone number . 2 Listen to or bypass the OGM. 3 Enter your REMOTE ACCESS Code. 4 Press keypad “2” to playback your messages. Ö For other instructions, see the Remote Intruction code menu shown on the next page.
The following is the Remote Instruction Code Help Menu: T o bypass the Outgoing Message , press “ * ” T o play new messages , press “2” Ö After playing back new messages, press “2” again to play all recorded messages .
28 11. Operational notes Electrical safety DON’T let the Base unit get wet . Electrical equipment can cause serious injury if used while you are wet or standing in water .
29 12. T r oubleshooting The Caprice 600 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself - you could make the problem worse and invalidate the Guarantee. AL WA YS check you have followed the steps listed in Section 2 to first that: install and set up your Caprice 600.
T r oubleshooting continue ... The caller may have withheld their number by dialing 141. Or they may be calling from a network that does not transmit the Caller Display (for example, it may be an international call). Be sure to wait until the second ring before answering.
T r oubleshooting continue ... If your PBX requires you to wait for a second Dial tone before dialing the telephone number , press the REDIAL/P AUSE button for a pause between the access digit and the number .
32 13. Guarantee and ser vice The Binatone Caprice 600 is guaranteed for 12 months from the date of purchase shown on your sales receipt. The Guarantee does not cover damage by misuse or negligence, or by excessive voltages - for example, faults on the telephone line, or lightning.
33 14. T echnical details Standard Corded T elephone with Caller Display and Answering Machine T emperature range Operating 0 ºC to 40 ºC Storage -20 ºC to 60 ºC Electrical power Base unit - input 230 V AC, 50 Hz; output DC 6 V , 350 mA; 2.
Connection and conditions for use Y ou can connect your Caprice 600 to a direct exchange line (DEL) - a line connected to a local exchange, with its own phone number; to an extension socket connected to a DEL; or to an extension on an approved compatible PBX.
Ein wichtiger Punkt beim Kauf des Geräts Binatone CAPRICE 600 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Binatone CAPRICE 600 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Binatone CAPRICE 600 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Binatone CAPRICE 600 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Binatone CAPRICE 600 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Binatone CAPRICE 600 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Binatone CAPRICE 600 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Binatone CAPRICE 600. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Binatone CAPRICE 600 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
