Benutzeranleitung / Produktwartung Prestige 623ME-T des Produzenten ZyXEL Communications
Zur Seite of 253
Pr estige 623ME-T ADSL Modem Combo for Internet Access User's Guide Version 3.40 February 2004.
.
Prestige 623ME-T User’s Guide Copyright iii Copyright Copyright © 2 003 by ZyXEL Comm unications Corporation. The contents of this publicat ion may not be reproduced in any part or a s a whole, t r.
.
Prestige 623ME-T User’s Guide FCC Statement v Federal Communications Commission (FCC) Interference S t atement This device complies with Part 15 of FCC rules. Operation is subject to the following two cond itions: • This device m ay not cause harmful interference.
.
Prestige 623ME-T User’s Guide FCC Statement vii ZyXEL Limited W arranty ZyXEL warrants to the original end us er (purchaser) that this product is free from any defects in materials or workm anship for a period of up to two y ears from the date of purchase.
.
Prestige 623ME-T User’s Guide Customer Support ix Customer Support Please have th e following i nformation re ady when you cont act customer support. • Product model and serial num ber. • Warranty Information. • Date that you received your device.
.
Prestige 623ME-T User’s Guide Table of Contents xi T able of Content s Copyright ...................................................................................................................... ..................................iii Federal Communications Commission (FCC) Interfer en ce S tatement .
Prestige 623ME-T User’s Guide xii Table of Contents 3.9.1 RFC 14 83 ....................................................................................................................... .... 3-5 3.9.2 PPP oE .......................................
Prestige 623ME-T User’s Guide Table of Contents xiii 8.2 UPnP a nd ZyXEL ................................................................................................................. ..... 8-2 8.2.1 Configuri ng UPnP ............................
Prestige 623ME-T User’s Guide xiv Table of Contents 14.2.1 Remote Node Profile ........................................................................................................ 14-1 14.2.2 Encapsulation and Multiple xing Scenari os ..........
Prestige 623ME-T User’s Guide Table of Contents xv Chapter 19 SNMP Configuration .................................................................................................. ...........19-1 19.1 SNMP Over view .................................
Prestige 623ME-T User’s Guide xvi Table of Contents 22.3.1 Resetting the Tim e ........................................................................................................... 22 -5 Chapter 23 Remote Man agement ..........................
Prestige 623ME-T User’s Guide List of Figures xvii List of Figures Figure 1-1 Internet Access App lication ......................................................................................... ................. 1-3 Figure 1-2 LAN-to-L AN Application .
Prestige 623ME-T User’s Guide xviii List of Figures Figure 14-1 Menu 1 1 Remote N ode Setup .......................................................................................... ......... 14-2 Figure 14-2 Menu 1 1.1 Rem ote No de Profile ......
Prestige 623ME-T User’s Guide List of Figures xix Figure 19-1 SNMP Management Model .............................................................................................. ........ 19-1 Figure 19-2 Menu 22 SNMP Config uration.................
.
Prestige 623ME-T User’s Guide List of Tables xxi List of T ables T able 2-1 Password ............................................................................................................. ........................... 2-3 T able 3-1 W izard Screen 1 .
Prestige 623ME-T User’s Guide xxii List of Tables T able 20-3 Menu 24.3.2 System Maintenance : UN IX Syslog ..................................................................... 20- 6 T able 20-4 Menu 24.4 System Ma intenanc e Menu : Diagnos tic ...
Prestige 623ME-T User’s Guide List of Tables xxiii List of Chart s Chart A-1 T roubles hooting Powe r LE D .........................................................................................................A-1 Chart A-2 T roubles hooting LAN LE D .
.
Prestige 623ME-T User’s Guide Preface xxv Preface Congratulations on your purchase from the Prestige 623ME-T ADSL Modem Combo for Internet Access. Your Prestige i s easy to install and configure . Use the we b configurator , System Management Term inal (SMT) or command interpreter interf ace to configure your Pres tige.
Prestige 623ME-T User’s Guide xxvi Preface • Mouse action s equences are denoted usin g a comm a. For exam ple, “click t he Apple icon, Control Panels and then Modem ” means first click the Apple icon, then point your mouse pointer to Control Panels and then click Modem .
Prestige 623ME-T User’s Guide Introduction to DSL xxvii Introduction to DSL DSL (Digital Subscriber Line) technology enh ances the data capacity of the ex isting twisted-pair wire that runs between t he local tele phone company switching of fices and m ost homes and offices.
.
Getting Started I Part I: Getting Started This part is structured as a step-by-step guide to help you acce ss your P restige. I t covers key features and applications, accessi ng the web config urator and confi guring the wizard screens for initial setup.
.
Prestige 623ME-T User’s Guide Getting To Know Your Prestige 1-1 Chapter 1 Getting To Know Your Prestige This chapter describes the key features and applications of your Prestige . 1.1 Introducing the Prestige Your Prestige i ntegrates a hi gh-speed 10/ 100Mbps aut o-negoti ating LAN i nterface and a high-spee d DSL port into a single package.
Prestige 623ME-T User’s Guide 1-2 Getting To Know Your Prestige Protocols Supported • TCP/IP (Trans mission Co ntrol Prot ocol/Inter net Protocol) network la yer protoc ol. • PPP (Point-to-Point Protoc ol) link layer protocol. • Transparent b ridging f or unsupp orted networ k layer pr otocols.
Prestige 623ME-T User’s Guide Getting To Know Your Prestige 1-3 • Web configurato r. P AP and CHAP Security The Prestige s upports PAP (Passw ord Authent ication Protocol ) and CHA P (Challenge Handshake Authenticatio n Protocol). CHAP is m ore secure since t he password i s scram bled prior to transmission.
Prestige 623ME-T User’s Guide 1-4 Getting To Know Your Prestige 1.3.2 LAN to LAN Application You can use the Prestige to connect two geogr aphical ly dispersed net works throug h an ADSL l ine. A typi cal LAN-to-LAN application for your Prestige is shown as follows.
Prestige 623ME-T User’s Guide Introducing the Web Configurato r 2-1 Chapter 2 Introducing the Web Configurator This chapter describes how to access and navigate the web configurator.
Prestige 623ME-T User’s Guide 2-2 Introducing the Web Configurato r The Prestige automatically times out after fiv e minutes of inactivity . Simply log back into the Prestige if this happen s to you. 2.3 Navigating the Prestige W eb Configurator The followin g summari zes how to navigat e the web con figurator fr om the Site Map scre en.
Prestige 623ME-T User’s Guide Introducing the Web Configurato r 2-3 2.4 Configuring Password It is highly recommended tha t you change the password for accessing the Prestige. To change your Prestig e’s password, click Advanced Setup and then Password .
Prestige 623ME-T User’s Guide 2-4 Introducing the Web Configurato r 2.5 Resetting the Prestige If you forget your password or ca nnot access the Prestige, you will nee d to reload the factory-default configuration file or use the RESET button th e back of the Prestige.
Prestige 623ME-T User’s Guide Wizard Setup 3-1 Chapter 3 Wizard Setup This chapter provides information on the Wiza rd Setup screens in the web configurator.
Prestige 623ME-T User’s Guide 3-2 Wizard Setup LAN do not need PPPoE software installed, since the Pr estig e does that part of the task. Furthermore, with NAT, all of the LANs’ com puters will have access. 3.2.2 RFC 1483 RFC 1483 describes two method s for Multiprotocol En capsulation over ATM Adaptation Layer 5 (AAL5).
Prestige 623ME-T User’s Guide Wizard Setup 3-3 Figure 3-1 Wizard Screen 1 The following table describes the labels in this screen. Table 3-1 Wizard Screen 1 LA BE L DESCRIPTION Protocol Select the encapsulat ion type your ISP uses from the drop-do wn list box.
Prestige 623ME-T User’s Guide 3-4 Wizard Setup unless you a re told othe rwise. Let's say you select 19 2.168.1.0 a s the network number; wh ich covers 254 individual a ddresses, fr om 192.16 8.1.1 to 192.168.1. 254 (zero and 255 are reserve d).
Prestige 623ME-T User’s Guide Wizard Setup 3-5 You can obt ain your IP a ddress from the IANA, from an ISP or i t can be assigne d from a private networ k. If you belong to a small orga nization and your Internet acce s s is through an ISP, the ISP can provide you with the Internet addresses for your local networks.
Prestige 623ME-T User’s Guide 3-6 Wizard Setup Table 3-2 Internet Connection with RFC 1483 LA BE L DESCRIPTION Modem Type This field displays the protocol selected on the prev ious wizard screen. Protocol This field displays the encaps ulation used by the protocol s elected on the previous wizard screen.
Prestige 623ME-T User’s Guide Wizard Setup 3-7 Table 3-3 Internet Connection with PPPoE LA BE L DESCRIPTION Modem Type This field displays the protocol selected in the prev ious wizard screen. Protocol This field displays the encapsulation us ed fo r the protocol selected in the previous wizard screen.
Prestige 623ME-T User’s Guide 3-8 Wizard Setup 3.10.1 IP Pool Setup The Prestige is pre-config ured with a pool of IP addre sses. This leaves a plurality of IP ad dresses, (excluding the Prestige itself which has a d efault IP of 192.168.1.1 ) for other serv er machines, for exa mple, server for mail, FTP, telnet, web, etc.
LAN II Part II: LAN This part covers LAN (L ocal Area Network) setup..
.
Prestige 623ME-T User’s Guide LAN Setup 4-1 Chapter 4 LAN Setup This chapter describes how to configure LAN settings. 4.1 LAN Overview A Local Area Network (LAN) is a sh ared communication system to whic h m any computers are attached. A LAN is a computer network limited to the immed iate ar ea, usually the same building or floor of a building.
Prestige 623ME-T User’s Guide 4-2 LAN Setup There are two ways that an ISP disseminates the DNS se rver addresses. The first is for an ISP to tell a customer the DNS server addresses, us ually in the form of an information sheet, when s/he signs up.
Prestige 623ME-T User’s Guide LAN Setup 4-3 These param eters should wor k for the m ajority of in stallations. If your ISP gi ves you explicit DNS server address(es), read the em bedded we b confi gurator help regarding w hat fields need to be configure d.
Prestige 623ME-T User’s Guide 4-4 LAN Setup 4.5 Configuring LAN Click LAN to open the following sc reen. Figure 4-2 LAN The following table describes the labels in this screen.
Prestige 623ME-T User’s Guide LAN Setup 4-5 Table 4-1 LAN LA BE L DESCRIPTION Client IP Pool Starting Address This field specifies the first of the contigu ous addresses in the IP address pool. Size of Client IP Pool This field specifies the size or count of the IP addr ess pool.
.
NAT and Dynamic DNS III Part III: NAT and Dynamic DNS This part covers NA T (Network Address T ran slation) and dynamic DNS (Domain Name Sever)..
.
Prestige 623ME-T User’s Guide NAT 5-1 Chapter 5 Network Address Translation (NAT) This chapter discusses how to configure NAT on the Prestige . 5.1 NA T Overview NAT (Network Address Tran slation - .
Prestige 623ME-T User’s Guide 5-2 NAT The IP address for the SUA can be either fixed or dynamically assigne d when a call is connected. In addition, you can desi gnate servers, e.g ., a web serve r and a telnet se rver, on yo ur local network a nd make t hem accessible to the outside world.
Prestige 623ME-T User’s Guide NAT 5-3 Figure 5-2 Multiple Servers Behind NAT Example Please note that a server can support more than one service, e.g.
Prestige 623ME-T User’s Guide 5-4 NAT 5.3 Selecting the NA T Mode Click NAT to open the follo wing screen. Figure 5-3 NAT Mode The following table describes the labels in this screen. Table 5-2 NAT Mode LABEL DESCRIPTION None Select this radio button to disabl e NAT.
Prestige 623ME-T User’s Guide NAT 5-5 Figure 5-4 Edit SUA/NAT Server Set The following table describes the labels in this screen..
Prestige 623ME-T User’s Guide 5-6 NAT Table 5-3 Edit SUA/NAT Server Set LABEL DESCRIPTION Start Port No. Enter a port number in this field. To forward only one port, enter the port num ber again in the End Port No. field. To forward a series of ports, enter the start port number here and the end port numb er in the End Port No.
Prestige 623ME-T User’s Guide Dynamic DNS Setup 6-1 Chapter 6 Dynamic DNS Setup This chapter discusses how to configure your Prestige to use Dynamic DNS. 6.1 Dynamic DNS Dynamic DNS allows you to update your curr ent dynamic IP address with one or many dynamic DNS services so that anyone can c ontact you (in NetMee ting, CU-SeeMe, etc.
Prestige 623ME-T User’s Guide 6-2 Dynamic DNS Setup Figure 6-1 DDNS The following table describes the labels in this screen. Table 6-1 DDNS LABEL DESCRIPTION Active Select this che ck box to use dynamic DNS. Service Provider Select the name of your Dynamic DNS service provider.
Remote Management and UPnP IV Part IV: Remote Management and UPnP This part cont ains information on ho w to config ure the Prestige for remote management and se tting up Universal Plug and Play (UPnP).
.
Prestige 623ME-T User’s Guide Remote Management Conf iguration 7-1 Chapter 7 Remote Management Configuration This chapter provides information on configuring remote management.
Prestige 623ME-T User’s Guide 7-2 Remote Management Conf iguration 7.1.2 Remote Management and NA T When NAT is enabled: Use the Prestige’s WAN IP address wh e n configu ring from the WAN. Use the Prestige’s LAN IP address when configuring from the LAN.
Prestige 623ME-T User’s Guide Remote Management Conf iguration 7-3 7.4 Web You can use the Prestige’s em bedded web confi gurator for c onfiguration a nd file m anagement. See the online hel p for details. 7.5 Configuring Remote Management Click Remote Management t o open the following screen.
Prestige 623ME-T User’s Guide 7-4 Remote Management Conf iguration Table 7-1 Remote Management LA BE L DESCRIPTION Secured Client IP The default 0.0.0.0 allo ws any client to use this service to remotely ma nage the Prestige. Type an IP address to restrict access to a client with a matching IP address.
Prestige 623ME-T User’s Guide UPnP 8-1 Chapter 8 Universal Plug-and-Play (UPnP) This chapter introduces the UPnP feature in the web configurator. 8.1 Universal Plug and Play Overview Universal Plug and Play (UPnP) is a di stributed, open networki ng standard that uses TCP/IP fo r simple peer- to-peer networ k connectivity between devi ces.
Prestige 623ME-T User’s Guide 8-2 UPnP All UPnP-enabled devices may communicate freely with ea ch other without add itional configur ation. Disable UPnP if this is not your intention. 8.2 UPnP and ZyXEL ZyXEL has achieved UPnP c ertification fro m th e Universal Plug and Pl ay Forum Creates UPnP™ Implem enters Corp.
Prestige 623ME-T User’s Guide UPnP 8-3 Table 8-1 Configuring UPnP LA BE L DESCRIPTION Allow users to make configuration changes through UPnP Select this check box to allow UPnP-e nabl ed application.
Prestige 623ME-T User’s Guide 8-4 UPnP Step 3. In the Communications window, select the Universal Plug and Play chec k box in the Components selection box. Step 4. Click OK to go back to the Add/Remove Pr ograms Properties window and click Next . Step 5.
Prestige 623ME-T User’s Guide UPnP 8-5 Step 5. In the Networking Services window, select the Universal Plu g and Play check box. Step 6. Click OK to go back to the Windows Optional Ne tworking C omponent Wizard window and click Next . 8.4 Using UPnP in Windows XP Example This section sh ows you how t o use the UP nP feature in Windows XP.
Prestige 623ME-T User’s Guide 8-6 UPnP Step 3. In the I nternet Connection Properties window, click Settings to see the port mappings there were a utomatically created. Step 4. You may edit or delete the port mappings or cli ck Add to manually add port m appings.
Prestige 623ME-T User’s Guide UPnP 8-7 Step 6. Double-click on the icon to display your current Internet connection status. 8.4.2 Web Configurator Easy Access With UPnP, you can access the web-base d configurator on the Prestige without finding out the IP address of the Prestige first.
Prestige 623ME-T User’s Guide 8-8 UPnP Step 4. An icon with the description for each UPnP-enabl ed device displa ys under Local Network . Step 5. Right-click on the icon for you r Prestige and select Invoke . The web configurator login screen displ ays.
Maintenance V Part V: Maintenance This part covers the maint enance screens..
.
Prestige 623ME-T User’s Guide Maintenance 9-1 Chapter 9 Maintenance This chapter displays system information such as ZyNOS firmware, port IP addre sses and port traffic statistics. 9.1 Maintenance Overview Use the maintenance screens to view system informa tion, upload new firm ware, manage configuratio n and restart your Prestige.
Prestige 623ME-T User’s Guide 9-2 Maintenance Figure 9-1 System Status The following table describes the labels in this screen. Table 9-1 System Status LA BE L DESCRIPTION System Status.
Prestige 623ME-T User’s Guide Maintenance 9-3 Table 9-1 System Status LA BE L DESCRIPTION Syst em Name This is the name of your Prestige. It is for identification purposes. ZyNOS F/W Version This is the ZyNOS firmware version and the date created. ZyNOS is ZyXEL' s proprietary Network Operating System design.
Prestige 623ME-T User’s Guide 9-4 Maintenance 9.2.1 System S t atistics Click Show Statistics in the System Status screen to open the following screen. Read-only information here includes port status and pac ket specific stat istics. Also pr ovided are "sys tem up tim e" and "poll inte rval(s)".
Prestige 623ME-T User’s Guide Maintenance 9-5 Table 9-2 System Status: Show Statistics LA BE L DESCRIPTION Upstream Speed This is the upstream speed of your Prestig e. Downstream Speed This is the downstream speed of your Prestige. Node-Link This field displa ys the remote node index number and link t ype.
Prestige 623ME-T User’s Guide 9-6 Maintenance 9.3 DHCP T able Screen DHCP (Dynamic Host Config uration Protocol, RFC 2131 and RFC 2132) allows individual clien ts to obtain TCP/IP config uration at start- up from a ser ver. You can confi gure the Prestige as a DHCP serve r or disable it.
Prestige 623ME-T User’s Guide Maintenance 9-7 Click Diagnostic to display the following screen. Figure 9-4 Diagnostic 9.4.1 Diagnostic General Screen Click Diagnostic and then General to open the screen shown next.
Prestige 623ME-T User’s Guide 9-8 Maintenance Figure 9-5 Diagnostic General The following table describes the labels in this screen. Table 9-4 Diagnostic General LA BE L DESCRIPTION TCP/ IP Address Type the IP address of a computer that you wa nt to ping in order to test a connection.
Prestige 623ME-T User’s Guide Maintenance 9-9 Table 9-4 Diagnostic General LA BE L DESCRIPTION Back Click this button to go back to the main Diagnostic screen. 9.4.2 Diagnostic DSL Line Screen Click Diagnostic and then DSL Line to open the screen sh own next.
Prestige 623ME-T User’s Guide 9-10 Maintenance Table 9-5 Diagnostic DSL Line LA BE L DESCRIPTION Reset ADSL Line Click this button to reinitialize the ADSL line. The large text bo x above then displays the progress and results of this operation, for ex ample: "Start to reset ADSL Loading ADSL modem F/W.
Prestige 623ME-T User’s Guide Maintenance 9-11 Figure 9-7 Firmware Upgrade The following table describes the labels in this screen. Table 9-6 Firmware Upgrade LA BE L DESCRIPTION File Path Type in the location of the file you want to upload in this field or click Browse .
Prestige 623ME-T User’s Guide 9-12 Maintenance The Prestige automatically restarts in this time causing a tempor ary network disconnect. In some operating systems, y ou may see the f ollowing ic on on your desktop.
SMT General Configuration VI Part VI: SMT General Configuration This part covers System Manag ement T erminal co nfiguration for general setup, Ethernet setup, Internet access, remote nodes, remote n ode TCP/IP , st atic routing and NA T .
.
Prestige 623ME-T User’s Guide Introducing the SMT 10-1 Chapter 10 Introducing the SMT This chapter explains how to access and navigate the System Management Terminal and gives an overview of its menus.
Prestige 623ME-T User’s Guide 10-2 Introducing the SMT Figure 10-2 Prestige 623ME-T SMT Menu Ov erview.
Prestige 623ME-T User’s Guide Introducing the SMT 10-3 10.2 Navigating the SMT Interface The SMT (System Management Terminal) is the inte rface that you use t o co nfigure your Pr estige. Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.
Prestige 623ME-T User’s Guide 10-4 Introducing the SMT Figure 10-3 SMT Main Menu 10.2.1 System Management T erminal Interface Summar y Table 10-2 Main Menu Summary # MENU TITLE DESCRIPTION 1 General Setup Use this menu to set up your general information.
Prestige 623ME-T User’s Guide Introducing the SMT 10-5 10.3 Changing the System Password Change the Pre stige default password by following t he steps shown ne xt. Step 1. Enter 23 in the main menu to display Menu 23 - System Security as s hown next.
.
Prestige 623ME-T User’s Guide General Setup 11-1 Chapter 11 General Setup Menu 1 - General Setup contains administrative and system-related information. 11.1 General Setup Menu 1 — General Se tup contains a dministrat ive and system -related in formation ( shown next ).
Prestige 623ME-T User’s Guide 11-2 General Setup Figure 11-1 Menu 1 General Setup Fill in the required fields. Refer to the table shown nex t for more information about these fields. Table 11-1 Menu 1 General Setup FIELD DESCRIPTION EXAMPLE System Name Enter a descriptive name for i dentification purposes.
Prestige 623ME-T User’s Guide General Setup 11-3 Table 11-1 Menu 1 General Setup FIELD DESCRIPTION EXAMPLE When you have compl eted this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at an y time to cancel.
Prestige 623ME-T User’s Guide 11-4 General Setup Table 11-2 Menu 1.1 Configure Dy namic DNS FIELD DESCRIPTION EXA MPLE Password Enter the password assigned to you. Enable Wildcard Your Prestige supp orts DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER] to select Yes or No This field is N/A when you choose DDNS client as your service provider.
Prestige 623ME-T User’s Guide LAN Setup 12-1 Chapter 12 LAN Setup This chapter covers how to configure your wired Local Area Network (LAN) settings. 12.1 LAN Setup This section describes how to configure the Ethern et using Menu 3 — LAN Setup . From the main m enu, enter 3 to displ ay menu 3.
Prestige 623ME-T User’s Guide 12-2 LAN Setup 12.2 Protocol Dependent Ethernet Setup Depending on the protoc ols for your ap plications, yo u need to configure the respective Et hernet Setup, a s outlined b elow. For TCP/IP Ethernet setup refer to the Internet Access Application chapter.
Prestige 623ME-T User’s Guide LAN Setup 12-3 Table 12-1 DHCP Ethernet Setup Menu Fields FIELD DESCRIPTION EXAMPLE DHCP Setup DHCP If set to Server , your Prestige can assign IP addresses, an IP default gateway and DNS servers to Windo ws 95, Windows NT and other systems that support the DHCP client.
Prestige 623ME-T User’s Guide 12-4 LAN Setup Table 12-2 TCP/IP Ethernet Setup Menu Fields FIELD DESCRIPTION EXAMPLE Multicast IGMP (Internet Group Multicast Pr otocol) is a network-layer protocol used to establish membership in a Multic ast group. The Prestige supports both IGMP version 1 ( IGMP-v1 ) and version 2 ( IGMP-v2 ).
Prestige 623ME-T User’s Guide Internet Access 13-1 Chapter 13 Internet Access This chapter show s you how to configure the LA N an d WAN of your Prestige for Internet access .
Prestige 623ME-T User’s Guide 13-2 Internet Access 13.4 Internet Access Configuration Menu 4 allows you to enter the In ternet Access information in one screen. Menu 4 is actually a simplified setup for one of the remote nodes that you ca n access in menu 11.
Prestige 623ME-T User’s Guide Internet Access 13-3 Table 13-1 Menu 4 Internet Acces s Setup FIELD DESCRIPTION EXAMPLE Multiplexing Press [ SPACE BAR ] to select the met hod of multiplexing used by your ISP. Choices are VC-based or LLC-b ased . LLC-based VPI # Enter the Virtual Path Iden tifier (VPI) assigned to you.
Prestige 623ME-T User’s Guide 13-4 Internet Access Table 13-1 Menu 4 Internet Acces s Setup FIELD DESCRIPTION EXAMPLE Address Mapping Set When Full Feature is selected in the NA T field, configure address mapping sets in menu 15.1. T ype the numbers of mapping sets (1-8) to use with NAT.
Prestige 623ME-T User’s Guide Remote Node Configuration 14-1 Chapter 14 Remote Node Configuration This chapter covers remote node configuration. 14.1 Remote Node Setup Overview This section de scribes the pr otocol-i ndependent parame ters for a rem ote node.
Prestige 623ME-T User’s Guide 14-2 Remote Node Configuration Figure 14-1 Menu 11 Remote No de Setup 14.2.2 Encap sulation and Multiplexing Scenarios For Internet access you shou ld use the encapsulation and multiplex ing methods used by your ISP.
Prestige 623ME-T User’s Guide Remote Node Configuration 14-3 Figure 14-2 Menu 11.1 Remote Node Profile In Menu 11.1 – Remote N ode Profile , fill in the fields as described in the following table.
Prestige 623ME-T User’s Guide 14-4 Remote Node Configuration Table 14-1 Menu 11.1 Remote Node Profile FIELD DESCRIPTION EXAMPLE Rem Login Type the login name that this remote node will use to call your Prestige. The login name and the Rem Password will be used to authenticate this node.
Prestige 623ME-T User’s Guide Remote Node Configuration 14-5 Table 14-1 Menu 11.1 Remote Node Profile FIELD DESCRIPTION EXAMPLE Schedule Sets This field is only a pplicable for PPPoE and PPPo A encapsulation. You can apply up to four schedule sets here.
Prestige 623ME-T User’s Guide 14-6 Remote Node Configuration The metric sets the priority for the Prestige’s routes to the Internet. If any two of t he default routes have the same metric, the Prestige uses the following pre-defined priorities: 1.
Prestige 623ME-T User’s Guide Remote Node Configuration 14-7 The next table explain s fields in Menu 11.3 – Remote Node Network Layer Options . Table 14-2 Menu 11.
Prestige 623ME-T User’s Guide 14-8 Remote Node Configuration Table 14-2 Menu 11.3 Remote Node Network Layer Options FIELD DESCRIPTION EXAMPLE Version Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are RIP-1 , RIP-2B or RIP-2M .
Prestige 623ME-T User’s Guide Remote Node Configuration 14-9 14.5 Remote Node Filter Move the cur sor to the Edit Filter Sets fiel d in m enu 11.1, then press [SPACE BAR] to select Yes . Press [ENTER] to display Menu 11.5 – Remote Node Filter . Use Menu 11.
Prestige 623ME-T User’s Guide 14-10 Remote Node Configuration 14.5.1 We b Configurator Intern et Security Filter Rules In the web configu rator, open the Security screen as shown next.
Prestige 623ME-T User’s Guide Remote Node Configuration 14-11 Figure 14-8 Menu 21- Filer Set Confi guration The following figures display the filter rules in filter sets 11 and 12. Figure 14-9 Menu 21.11- WebSe t 11 Figure 14-10 Menu 21.12- WebSet 12 Menu 21.
Prestige 623ME-T User’s Guide 14-12 Remote Node Configuration Do not edit filter set s 1 1 and 12. They are used excl usively by the web configurator . Any rules you configured in sets 1 1 and 12 will be erased and replaced when you apply the web configurator-generated filter rules.
Prestige 623ME-T User’s Guide Remote Node Configuration 14-13 Figure 14-12 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation In this case, only one set of VPI and VC I num bers need be specified for all pr otocols.
.
Prestige 623ME-T User’s Guide Static Route Setup 15-1 Chapter 15 Static Route Setup This chapter shows how to setup IP static routes. 15.1 IP S tatic Route Overview Static routes tell the Prestige routing information th at it cannot learn au tomati cally through other m eans.
Prestige 623ME-T User’s Guide 15-2 Static Route Setup 15.2 Configuring an IP st atic route Step 1. To configure an IP static route, use Menu 12 – Static Route Setup (show n next). Figure 15-2 Menu 12 Static Route Setup Step 2. From m enu 12, select 1 t o open Menu 12.
Prestige 623ME-T User’s Guide Static Route Setup 15-3 Figure 15-4 Menu12.1.1 Edit IP Static Route The following table describes the fields for Menu 12.1.1 – Edit IP Static Ro ute Setup . Table 15-1 Menu12.1.1 Edit IP Static Route FIELD DESCRIPTION Route # This is the index number of the static route that y ou ch ose in menu 12.
Prestige 623ME-T User’s Guide 15-4 Static Route Setup Table 15-1 Menu12.1.1 Edit IP Static Route FIELD DESCRIPTION Private This parameter determine s if the Prestige will include the route to this remote node in its RIP broadcasts. If set to Yes , this route is kept private and is not included in RIP broadcasts.
Prestige 623ME-T User’s Guide Bridging Setup 16-1 Chapter 16 Bridging Setup This chapter shows you how to configure th e bridging parameters of your Prestige. 16.1 Bridging Overview Bridging ba ses the forwa rding decisi on on the MAC (M edia Access C ontrol), or hardware a ddress, while routing does it on the net work layer ( IP) address.
Prestige 623ME-T User’s Guide 16-2 Bridging Setup Figure 16-1 Menu 11.1 Remote Node Profile Step 2. Move the cur sor to the Edit IP/Bridge field, then press [ SPACE BAR ] to set the value to Yes and press [ENTER] to edit Menu 11.3 – Remote Node Network Layer Options .
Prestige 623ME-T User’s Guide Bridging Setup 16-3 Table 16-1 Menu 11.3 Remote Node Network Layer Options : Bridge Fields FIELD DESCRIPTION Bridge (menu 11.1) Make sure this field is set to Yes . Edit IP/Bridge (menu 11.1) Press [SPACE BAR] to select Yes and press [ENTER] to display menu 1 1.
Prestige 623ME-T User’s Guide 16-4 Bridging Setup Table 16-2 Menu 12.3.1 Edit Bridge Static Ro ute FIELD DESCRIPTION Active Indicates whether the static route is active ( Yes ) or not ( No ). Ether Address T ype the MAC address of the destinati on computer that you want to bridge the packets to.
Prestige 623ME-T User’s Guide NAT 17-1 Chapter 17 Network Address Translation (NAT) This chapter discusses h ow to configure NAT on the Prestige. 17.
Prestige 623ME-T User’s Guide 17-2 NAT The following fig ure shows how you appl y NAT to the rem ote node in menu 11.1. Figure 17-2 Menu 11.3 Apply ing NAT to the Remote Node Step 1. Enter 11 from the main menu. Step 2. When menu 11 appears, as shown in the following fi gure, type t he number of t he remote n ode that you want to conf igure.
Prestige 623ME-T User’s Guide NAT 17-3 17.3 NA T Server Setup A server set is a list of LAN servers mapped to external ports. To use this set, NAT must be enabled. Please see the section on port forwardi ng in the cha pter on NAT web configurat or screens fo r further i nformation on these m enus.
Prestige 623ME-T User’s Guide 17-4 NAT Figure 17-4 Configuring NAT 17.4.2 How to configure NA T From m enu 4, choose t he SUA Onl y option from the Network Address Translation field. This is the Many-to-One m apping discussed in secti on 17.4. The SUA On ly read-only op tion from the Network Address Translation field in menus 4 and 11.
Prestige 623ME-T User’s Guide NAT 17-5 17.4.3 Example 2: Configuring an Inside Server In this case you want to make the LAN Server visible to the outside world. Figure 17-6 Configuring an Inside Serv er 17.4.4 How to configur e an Inside Server Go to menu 15.
.
SMT Advanced Management VII Part VII: SMT Advanced Management This part discusse s filtering setup, SNMP , system information and diagno sis, firmware and configuration file maintenance, sy stem mainte nance, remote managem ent, IP policy routing and call scheduling.
.
Prestige 623ME-T User’s Guide Filter Configuration 18-1 Chapter 18 Filter Configuration This chapter shows you how to create and apply filters. 18.1 About Filtering Your Prestige uses filters to decide whether or not to allow passage of a data packet and/or to make a call.
Prestige 623ME-T User’s Guide 18-2 Filter Configuration Figure 18-1 Outgoing Packet Filtering Process Two sets of factory filter rules have been configured in menu 21 to prevent NetBIOS traffic from triggering calls. A summary of their filter rules is shown in the figures that follow.
Prestige 623ME-T User’s Guide Filter Configuration 18-3 Start Fetch First Filter Set Fetch First Filter Rule Active? Execute Filter Rule Fetch Next Filter Rule Next filter Rule Available? Fetch Next.
Prestige 623ME-T User’s Guide 18-4 Filter Configuration For incoming packets, your Prestige ap plies data filters only. Packets are p rocessed depending on whether a match is found. The following section s describe how to configure filter sets. The Filter Structur e of the Prestige A filter set consists of one or more filter rules.
Prestige 623ME-T User’s Guide Filter Configuration 18-5 Figure 18-4 NetBIOS_WAN Filte r Rules Summary Figure 18-5 NetBIOS_LAN Filter Rules Summary Figure 18-6 PPPoE Filter Rules Summary Menu 21.1 - Filter Rules Summary # A Type Filter Rules M m n - - ---- --------------------------------------------------------------- - - - 1 Y IP Pr=6, SA=0.
Prestige 623ME-T User’s Guide 18-6 Filter Configuration 18.2.1 Filter Rules Summary Menus The following tables briefly describe the abbreviations used in menu 21.x. Table 18-1 Abbreviations Used in the Filter Rules Summary Menu FIELD DESCRIPTION # The filter rule number: 1 to 6.
Prestige 623ME-T User’s Guide Filter Configuration 18-7 Table 18-2 Rule Abbreviations Used FILTER TYPE DESCRIPTION Off Offset Len Length 18.3 Configuring a Filter Rule To configure a filter rule, type its number in Menu 21.x – Filter Rules Summary and press [ENTER] to open me nu 21.
Prestige 623ME-T User’s Guide 18-8 Filter Configuration Figure 18-7 Menu 21.x.1 TCP/IP Filter Rule The following table describes how to con figure your TCP/IP filter rule.
Prestige 623ME-T User’s Guide Filter Configuration 18-9 Table 18-3 Menu 21.x.1 TCP/IP Filter Rule FIELD DESCRIPTION EXAMPLE IP Mask Type the IP mask to apply to the Destination: IP Addr field. IP mask Port # Type the destination port of t he packets you want to filter.
Prestige 623ME-T User’s Guide 18-10 Filter Configuration Table 18-3 Menu 21.x.1 TCP/IP Filter Rule FIELD DESCRIPTION EXAMPLE Action Not Matched Select the action for a packet not matching the rule.
Prestige 623ME-T User’s Guide Filter Configuration 18-11 Packet into IP Filter Matched Matched Yes Action Matched Action Not Matched More? No Filter Active? Check IP Protocol Drop Drop Packet Accept.
Prestige 623ME-T User’s Guide 18-12 Filter Configuration 18.3.2 Generic Filter Rule This section shows you how to co nfigure a generic filte r rule. The purpose of generic rules is to allow you to filter non-IP packets. For IP, it is generally easier to use the IP rules directly.
Prestige 623ME-T User’s Guide Filter Configuration 18-13 Table 18-4 Menu 21.6.1 Generic Filter Rule FIELD DESCRIPTION EXAMPLE Filter Type Press [SPACE BAR] and then [ENTER] to select a type of rule. Parameters displayed belo w each type will be different.
Prestige 623ME-T User’s Guide 18-14 Filter Configuration 18.4 Filter T ypes and NA T There are two classe s of filter rules, Generic Filter Device rules and Protocol Filter ( TCP/IP ) rules. Generic Filter rules act on the raw data from/to LAN and WAN.
Prestige 623ME-T User’s Guide Filter Configuration 18-15 Figure 18-11 Sample Telnet Filter Step 1. Enter 21 in the main menu to display Menu 21 — Filter Set Configuration . Step 2. Enter the index number of the filter set you want to configure (in this case 3) .
Prestige 623ME-T User’s Guide 18-16 Filter Configuration Step 4. Press [ENTER] at the message “ Press [ENTER] to confirm or [ESC] to cancel” to open Menu 21.3 — Filter Rules Summary . Step 5. Type 1 to configure the first filter rule. Make the entries in this menu as shown next.
Prestige 623ME-T User’s Guide Filter Configuration 18-17 Figure 18-13 Menu 21.3 Sample Filter Rules Summary After you have created the filter set, you must apply it. Step 1. Enter 11 in the main menu to display menu 11 and typ e the remote node number to edit.
Prestige 623ME-T User’s Guide 18-18 Filter Configuration Table 18-5 Filter Sets Table FILTER SETS DESCRIPTION Input Filter Sets: Apply filters for incoming traffic. You may apply protocol or devic e filter rules. See earlier in this chapter for information on filters.
Prestige 623ME-T User’s Guide Filter Configuration 18-19 Figure 18-15 Filtering Remote Node T raffic Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation.
.
Prestige 623ME-T User’s Guide SNMP Configuration 19-1 Chapter 19 SNMP Configuration This chapter explains SNMP Configuration menu 22. 19.1 SNMP Overview Simple Netw ork Managem ent Protoc ol is a prot ocol used for exchangi ng managem ent inform ation between network de vices.
Prestige 623ME-T User’s Guide 19-2 SNMP Configuration An agent is a managem ent software mod ule that resides i n a managed d evice (the Pres tige). An agent translates the local management information from the managed device into a form compatible with SNMP.
Prestige 623ME-T User’s Guide SNMP Configuration 19-3 Figure 19-2 Menu 22 SNMP Configuration The following table d escribes the SNMP configuration parameters.
Prestige 623ME-T User’s Guide 19-4 SNMP Configuration 19.4 SNMP T rap s The Prestige will send traps to the SNMP manager when any on e of the following events occurs: Table 19-2 SNMP Traps TRAP # TRAP NAME DESCRIPTION 1 coldStart ( defined in RFC-121 5 ) A trap is sent after booting (power on).
Prestige 623ME-T User’s Guide System Information and Diagnosis 20-1 Chapter 20 System Information and Diagnosis This chapter covers the information and diagnostic tools in SMT menus 24.
Prestige 623ME-T User’s Guide 20-2 System Information and Diagnosis The following ta ble describe s the fields present in Menu 24.1 — System Maintenance — Status which are read-only and meant fo r diagnostic purposes. Figure 20-2 Menu 24.1 Sy stem Maintenance : Status The following ta ble describe s the fields present in Menu 24.
Prestige 623ME-T User’s Guide System Information and Diagnosis 20-3 Table 20-1 Menu 24.1 Sy stem Maintenance : Status FIELD DESCRIPTION Status T his shows the current status of the LAN. Tx Pkts T his is the number of transmitted packets to the LAN. Rx Pkts T his is the number of received packets from the LAN.
Prestige 623ME-T User’s Guide 20-4 System Information and Diagnosis Figure 20-4 Menu 24.2.1 Sy stem Maintenance : Information The following table describes the fields in this menu. Table 20-2 Menu 24.2.1 Sy stem Maintenance : Information FIELD DESCRIPTION Name This displays the system name of your Prestige.
Prestige 623ME-T User’s Guide System Information and Diagnosis 20-5 20.3.2 Console Port Speed The Prestige has an internal console port fo r support personnel only . Do not open the Prestige as it will void your warranty . You can set up differe nt port speeds for the console port throu gh Menu 24.
Prestige 623ME-T User’s Guide 20-6 System Information and Diagnosis Step 3. Enter 1 from Menu 2 4.3 — System Maintenance — Lo g and Trace to display the error log in the system. After the Prestige finishes displaying the error log, you will have the option to clear it.
Prestige 623ME-T User’s Guide System Information and Diagnosis 20-7 Table 20-3 Menu 24.3.2 Sy stem Maintenance : UNIX Sy slog PARAMETER DESCRIPTION Log Facility Use [SPACE BAR] and then [ENTER] to select one of seven different local options. The log facility lets you lo g the message in di ff erent server files.
Prestige 623ME-T User’s Guide 20-8 System Information and Diagnosis Jul 19 11:28:39 192.168.102.2 ZyXEL Communications Corp.: Packet Trigger: Protocol=1, Data=4500003c100100001f010004c0a86614ca849a7b08004a5c020001006162636465666768696a6b6c6d6e6 f7071727374 Jul 19 11:28:56 192.
Prestige 623ME-T User’s Guide System Information and Diagnosis 20-9 Follow the procedure next to get to Diagnostic: Step 1. From the main menu, type 24 to open Menu 24 – System Maintenance . Step 2. From this m enu, type 4. Diagnost ic to ope n Menu 24.
.
Prestige 623ME-T User’s Guide Firmware and Configuration File Maintenance 21-1 Chapter 21 Firmware and Configuration File Maintenance This chapter tells you how to backup and restor e your configuration file as well as upload n ew firmware and configuration files.
Prestige 623ME-T User’s Guide 21-2 Firmware and Configuration File Maintenance Table 21-1 Filename Conventions FILE TYPE INTERNAL NAME EXTERNAL NAME DESCRIPTION Configuration File Rom-0 This is the configurat ion filename on the Pres tige.
Prestige 623ME-T User’s Guide Firmware and Configuration File Maintenance 21-3 21.2.1 Backup Configuration Follow the instructions as shown in the next screen. Figure 21-1 Telnet in Menu 24.5 21.2.2 Using the FTP Command from the Command Line Step 1.
Prestige 623ME-T User’s Guide 21-4 Firmware and Configuration File Maintenance Figure 21-2 FTP Session Example 21.2.4 GUI-based FTP Client s The followin g table describes some of the c ommands that you may see in GUI-based F TP clients.
Prestige 623ME-T User’s Guide Firmware and Configuration File Maintenance 21-5 21.2.6 Backup Confi guration Using TFTP The Prestige supports the up/download ing of the firmware and the configuration file using TFTP (Trivial File Transfer Protoc ol) over LAN.
Prestige 623ME-T User’s Guide 21-6 Firmware and Configuration File Maintenance Table 21-3 General Commands for GUI-based TFTP Clients COMMAND DESCRIPTION Host Enter the IP address of the Prestige. 19 2.168.1.1 is the Prestige’s default IP address when shipped.
Prestige 623ME-T User’s Guide Firmware and Configuration File Maintenance 21-7 21.3.1 Restore Using FTP For details about backup using (T)FTP please refer to ea rlier sections on FTP and TFTP file upload in this chapter. Figure 21-3 Telnet into Menu 24.
Prestige 623ME-T User’s Guide 21-8 Firmware and Configuration File Maintenance 21.3.2 Restore Using FTP Session Example Figure 21-4 Restore Usi ng FTP Session Example Refer to section 21 .2.5 to read about configurations that disallow TFTP and FTP over WAN.
Prestige 623ME-T User’s Guide Firmware and Configuration File Maintenance 21-9 Figure 21-5 Telnet Into Menu 24.7.1 Upload Sy stem Firmware 21.4.2 Configuration File Upload You see the following screen when you telnet into menu 24.7 .2. Figure 21-6 Telnet Into Menu 24.
Prestige 623ME-T User’s Guide 21-10 Firmware and Configuration File Maintenance Step 2. Enter “open”, followed by a space and the IP addres s of your Prestige. Step 3. Press [ENTER] when prom pted for a use rname. Step 4. Enter your pas sword as re quested (the default is “12 34”).
Prestige 623ME-T User’s Guide Firmware and Configuration File Maintenance 21-11 Step 1. Use telnet from your comput er to connect to the Prestige and log in. Because T FTP does not have any security checks, the Prestige records the IP addres s of the telnet client and accepts TFTP requests only from this address.
.
Prestige 623ME-T User’s Guide System Maintenance 22-1 Chapter 22 System Maintenance This chapter leads yo u through SMT menus 24.8 to 24.10. 22.1 Command Interpreter Mode Overview The Command I nterpreter (CI) is a part o f the main system firmware.
Prestige 623ME-T User’s Guide 22-2 System Maintenance 22.2 Call Control Support Call Control Suppo rt is only applicable when Encapsulation is set to PPPoE i n menu 4 or menu 1 1.1. The budget management function allows you to set a limit on the total outgo ing call time of the Prestige within certain times.
Prestige 623ME-T User’s Guide System Maintenance 22-3 The total budget is the time limit on the accum ulated time for outgoing calls to a rem ote node. When this limit is reached, the call will be dropped a nd further out going calls to that remote node will be bloc ked.
Prestige 623ME-T User’s Guide 22-4 System Maintenance Figure 22-5 Menu 24 Sy stem Maintenance Then en ter 10 to go to Menu 24. 10 System Ma intenan ce Time and Date Settin g to update the time and date settings of your Prestige as shown in the following screen.
Prestige 623ME-T User’s Guide System Maintenance 22-5 Table 22-2 Menu 24.10 System Main tenance: Time and Date Setting FIELD DESCRIPTION Enter the time service protocol that your time server sends when you turn on the Prestige.
.
Prestige 623ME-T User’s Guide Remote Management 23-1 Chapter 23 Remote Management This chapter cove rs remote management (SMT m enu 24.11). 23.1 Remote Management Overview Remote management allows you to determine which services/protocols can acces s which Prestige interface (if any) fr om which c omputers .
Prestige 623ME-T User’s Guide 23-2 Remote Management Figure 23-1 Menu 24.11 Remote Managemen t Control The following table describes the fields in this menu.
Prestige 623ME-T User’s Guide Remote Management 23-3 2. You ha ve disabled t hat service i n menu 24.1 1. 3. The IP addres s in the Secur ed Client IP fie ld (menu 2 4.11) does n ot match the client IP address. If it does not match, the Prestige will disconnect the session immediately.
.
Prestige 623ME-T User’s Guide IP Policy Routing 24-1 Chapter 24 IP Policy Routing This chapter covers setting and applying policies used for IP routing. 24.1 IP Policy Routing Overview Traditionally, routing is based on the d estination ad dress only and the IAD takes the shortest path to forward a pac ket.
Prestige 623ME-T User’s Guide 24-2 IP Policy Routing IPPR follows the existing pack et filtering facility of RAS in style and in implementation. The po licies are divided into sets, where related policies are grouped to geth er.
Prestige 623ME-T User’s Guide IP Policy Routing 24-3 Figure 24-2 Menu 25.1 IP Routing Policy Setup Table 24-1 Menu 25.1 IP Routing Policy Setup AB B RE V I AT I ON M E AN I NG Criterion SA Source IP.
Prestige 623ME-T User’s Guide 24-4 IP Policy Routing Type a num ber from 1 to 6 t o display Menu 25.1.1 – IP R outing Policy (see the next figure). Thi s menu allows you to configure a policy rule. Figure 24-3 Menu 25.1.1 IP Routing Policy The following table describes the fields in this menu.
Prestige 623ME-T User’s Guide IP Policy Routing 24-5 Table 24-2 Menu 25.1.1 IP Routing Policy FIELD DESCRIPTION Len Comp Press [SPACE BAR] and then [ENTER] to choose from Equal , Not Equal , Less , Greater , Less or Equal or Greater or Equal . Source: addr start / end Source IP address range from start to end.
Prestige 623ME-T User’s Guide 24-6 IP Policy Routing Figure 24-4 Menu 3.2 TCP/IP and DHCP Ethernet Setup Go to menu 11.3 (sho wn next) a nd type the number(s) o f the IP Rout ing Policy set(s) as appro priate. You can cascade up t o four policy sets by typing t heir numbers s eparated by co mmas.
Prestige 623ME-T User’s Guide IP Policy Routing 24-7 24.6 IP Policy Routing Example If a network has both In ternet and remote node conn ections, y ou can route Web packets to the Internet using one pol icy and r oute FTP packets t o a remot e network usi ng another pol icy.
Prestige 623ME-T User’s Guide 24-8 IP Policy Routing Figure 24-7 IP Routing Policy Example Step 3. Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly. Step 4. Create another policy set in menu 25. Step 5. Create a rule in m enu 25.
Prestige 623ME-T User’s Guide IP Policy Routing 24-9 Figure 24-8 IP Routing Policy Example Step 6. Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly. Step 7. Apply both policy sets in menu 3. 2 as shown ne xt. Figure 24-9 Apply ing IP Policies Example Menu 3.
.
Prestige 623ME-T User’s Guide Call Scheduling 25-1 Chapter 25 Call Scheduling Call scheduling (applicable for PPPoE encapsulation only) allows you to dictate when a remote node should be call ed and for how long.
Prestige 623ME-T User’s Guide 25-2 Call Scheduling T o delete a schedule set, enter the set number and press [SP ACE BAR] and then [ENTER] (or delete) in the Edit Name field. To setup a schedule set, select the schedule set you want to setup from men u 26 (1-12) and pr ess [ENTER] to see Menu 26.
Prestige 623ME-T User’s Guide Call Scheduling 25-3 Table 25-1 Menu 26.1 Schedule Set Setup FIELD DESCRIPTION EXAMPLE How Often Should this schedule set recur weekly or be used just onc e only? Press the [SPACE BAR] and then [ENTER] to select Once or Weekly .
Prestige 623ME-T User’s Guide 25-4 Call Scheduling Figure 25-3 Applying Schedule Set( s) to a Remote Node (PPPoE) You can ap ply up to f our schedule sets, separate d by comm as, for one remote node. Change the sc hedule set numbers to your pref erence(s).
Appendices and Index VIII Part VIII: Appendices and Index This part cont ains troubleshooting, ad ditional background information and an index of key terms.
.
Prestige 623ME-T User’s Guide Troubleshooting A-1 Appendix A Troubleshooting This chapter covers potential problems and the corresponding remedies. A.1 Using LEDs to Diagnose Problems The LEDs are useful aides f or finding possible probl em causes. A.
Prestige 623ME-T User’s Guide A-2 Troubleshooting A.1.3 DSL LED The DSL LED on the front panel does not light up . Chart A-3 Troubleshooti ng DSL LED STEPS CORRECTIVE ACTION 1 Check the telephone wire and connections bet ween the Prestige DSL por t and the wall jack.
Prestige 623ME-T User’s Guide Troubleshooting A-3 A.3 Web Configurator I cannot access the web configurator. Chart A-5 Troubleshooti ng Web Configurator STEPS CORRECTIVE ACTION 1 Make sure you are using the correct IP addre ss of the Prestige. Check the IP address of the Prestige.
Prestige 623ME-T User’s Guide A-4 Troubleshooting Chart A-7 Troubleshooti ng Login Username and Pass w ord STEPS CORRECTIVE ACTION 3 The default username is “admin”. T he default password is “1234”. T he Password and Username fields are case-sensitive.
Prestige 623ME-T User’s Guide Troubleshooting A-5 I cannot get a WAN IP ad dress from t he ISP. Chart A-10 Troubleshooti ng WAN Interface STEPS CORRECTIVE ACTION 1 The ISP provides the WAN IP address after authe nticating you. Authe ntication may be through the user name and pass word, the MAC address or the host name.
Prestige 623ME-T User’s Guide A-6 Troubleshooting A.8 Remote Node Connection I cannot con nect to a rem ote node or I SP. Chart A-13 Troubleshooti ng Connecting to a Remote Node or ISP STEPS CORRECTIVE ACTION 1 Check menu 4 or WAN screen to verify that t he username and pass word are entered properl y.
Prestige 623ME-T User’s Guide IP Subnetting B-1 Appendix B IP Subnetting IP Addres sing Routers “route” base d on the network num ber. The rout er t hat delivers the data packet to the correct destination hos t uses the host ID.
Prestige 623ME-T User’s Guide B-2 IP Subnetting A class “A” address (24 host bits) can have 2 24 –2 h osts (appr oximat ely 16 mill ion hosts). Since the first octet of a class “A” IP addre ss must c ontain a “0”, the first octet of a class “A” addres s can have a value of 0 to 12 7.
Prestige 623ME-T User’s Guide IP Subnetting B-3 of ones beginning from the left most bit of the mask, followed by a continuou s sequence of zeros, for a total number of 32 bi ts.
Prestige 623ME-T User’s Guide B-4 IP Subnetting Divide the network 192. 168.1.0 int o two se parate subnets by converti ng one of t he host ID bi ts of the IP address to a networ k number bit. The “bor rowed” host ID bit can be either “0” or “1” thus giving two subnets; 192.
Prestige 623ME-T User’s Guide IP Subnetting B-5 actual host for the first subn et is 192.168.1.1 and the highest is 192.168.1 .126. Similarly the host ID r ange for the second subnet is 192.
Prestige 623ME-T User’s Guide B-6 IP Subnetting Chart B-10 Subnet 4 NETWORK NUMBER L AST OCTET BIT VA LUE IP Address 192.168.1. 192 IP Address (Binary) 11000 000.10101000.0000 0001. 11 000 000 Subnet Mask (Binary) 11111111.11111111.11111111. 11 000000 Subnet Address: 192.
Prestige 623ME-T User’s Guide IP Subnetting B-7 Chart B-12 Class C Subnet Planning NO. “BORROWED” HOST BITS SUBNET MASK NO. SUBNETS NO. HOSTS PER SUBNET 1 255.255.255.128 (/25) 2 126 2 255.255.255.192 (/26) 4 62 3 255.255.255.224 (/27) 8 30 4 255.
Prestige 623ME-T User’s Guide B-8 IP Subnetting Chart B-13 Class B Subnet Planning NO. “BORROWED” HOST BITS SUBNET MASK NO. SUBNETS NO. HOSTS PER SUBNET 10 255.255.255.192 (/26) 1024 62 11 255.255.255.224 (/27) 2048 30 12 255.255.255.240 (/28) 4096 14 13 255.
Prestige 623ME-T User’s Guide PPPoE C-1 Appendix C PPPoE PPPoE in Action An ADSL m odem bridges a PPP session o ver Ethernet (P PP over Ethe rnet, RFC 2516) from your PC t o an ATM PVC (Permanent Virt ual Circuit) which c onnect s to a xDSL Access Concentrator where the PPP session terminates (see the ne xt figure).
Prestige 623ME-T User’s Guide C-2 PPPoE How PPPoE Works The PPPoE driver m akes the Ethernet appear as a serial link to the PC and the PC runs PPP over it, while the modem bridges the Et hernet frames to the Access Conce ntr ator (AC).
Prestige 623ME-T User’s Guide Setting up Your Computer’s IP Address D-1 Appendix D Setting up Your Computer’s IP Address All computers must have a 1 0M or 100M Et he rnet adapter card and TC P/IP installed.
Prestige 623ME-T User’s Guide D-2 Setting up Your Computer’s IP Address Installing Components The Network window Configuration ta b display s a list of i nstalled com ponents. Y ou need a net work adapter, the T CP/IP protoc ol and Cl ient for Microsoft Networks.
Prestige 623ME-T User’s Guide Setting up Your Computer’s IP Address D-3 2. Click the IP Address tab. -If your IP address is dynamic, select Obtain an IP address automatically . -If you have a static IP address, select Specify an IP address and type your informatio n into the IP Address and Subne t Mask fields.
Prestige 623ME-T User’s Guide D-4 Setting up Your Computer’s IP Address 4. Click the Gateway tab. -If you do not know your gateway’s IP address, remove previously installed gate ways. -If you have a gateway IP address, type it in the Ne w ga te way fi e l d and click Add .
Prestige 623ME-T User’s Guide Setting up Your Computer’s IP Address D-5 Windows 2000/NT/XP 1. For Windo ws XP, click start , Control Panel . In Windows 2000/NT, click Start , Settings , Control Panel . 2. For Windo ws XP, click Network Connections .
Prestige 623ME-T User’s Guide D-6 Setting up Your Computer’s IP Address 4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties . 5. T he Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP).
Prestige 623ME-T User’s Guide Setting up Your Computer’s IP Address D-7 6. -If you do not know your gatewa y's IP address, remove any previously installed gate ways in the IP Settin gs tab and click OK . Do one or more of the following if you want to configure additional IP addres ses: -In the IP Settings tab, in IP addresses, click Add .
Prestige 623ME-T User’s Guide D-8 Setting up Your Computer’s IP Address 7. In the Internet Protocol TCP/IP Properties window (the Gene ral t ab in Windows XP): -Click Obtain DNS server address automatically if you do not know your DNS server IP address(es).
Prestige 623ME-T User’s Guide Setting up Your Computer’s IP Address D-9 Macintosh OS 8/9 1. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel .
Prestige 623ME-T User’s Guide D-10 Setting up Your Computer’s IP Address 3. For d ynamically assigned settings, sel ect Using DHCP Server from the Configure: list. 4. For staticall y assigned settings, do the following: -From the Configure box, select Manually .
Prestige 623ME-T User’s Guide Setting up Your Computer’s IP Address D-11 2. Click Network in the icon bar. - Select Automatic from the Location list. - Select Built-in Ethernet from the Show list. - Click the TCP/IP tab. 3. For dynamically assigned settings, sel ect Using DHCP from the Configure list.
.
Prestige 623ME-T User’s Guide Virtual Circuit Topology E-1 Appendix E Virtual Circuit Topology ATM is a connection-oriented techno logy, meaning that it sets up virtual circuits over which end syste ms communicate.
.
Prestige 623ME-T User’s Guide Splitters and Microfilters F-1 Appendix F Splitters and Microfilters This appendix tells you how to install a POTS splitter or a telephone microfilter.
Prestige 623ME-T User’s Guide F-2 Splitters and Microfilters Step 2. Connect a cable from the double jack end of the Y-Connector to the “wall side” of the microfilter. Step 3. Connect another cable from the double jack end of the Y-C onnect or to the Prestige.
Prestige 623ME-T User’s Guide Power Adaptor Specifications G-1 Appendix G Power Adaptor Specifications NORTH AMERICAN PLUG STANDARDS AC Power Adapter Model DV-1215A Input Power AC120Volts/60Hz/30W Output Power AC12Volts/1.25A Power Consumption 11 W Safety Standards UL, CUL, CSA (UL 1310, CSA C22.
.
Prestige 623ME-T User’s Guide Index H-1 Appendix H Index A Address Assignment ........................................ 4-2 ADSL, what is it ? ........................................... xxix Alternative Subnet Mask Notation .................. B-3 AT comm and .
Prestige 623ME-T User’s Guide H-2 Index Filename Conv entions ................................... 20-1 Filter .............................................................. 11-1 Applying F ilters ....................................... 17-17 Ethernet traffic.
Prestige 623ME-T User’s Guide Index H-3 Criteria ....................................................... 23-1 Load Sharing.............................................. 23-1 Setup .......................................................... 23-2 IP Routing Poli cy Setup .
Prestige 623ME-T User’s Guide H-4 Index Restore Configur ation .................................... 20-6 RIP . 11-3, 13 -7. See Routing Inf ormation Pr otocol Routing Informati on Protoc ol .......................... 4-3 Direction ..................
Prestige 623ME-T User’s Guide Index H-5 U Universal Plug and Play ................................... 7-1 Application .................................................. 7-1 Security issues ............................................. 7-1 Universal Plug and Play Forum .
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications Prestige 623ME-T (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications Prestige 623ME-T noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications Prestige 623ME-T - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications Prestige 623ME-T reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications Prestige 623ME-T erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications Prestige 623ME-T besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications Prestige 623ME-T verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications Prestige 623ME-T. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications Prestige 623ME-T gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
