Benutzeranleitung / Produktwartung IES-1000 des Produzenten ZyXEL Communications
Zur Seite of 51
IES-1000 Integrated Ethernet Switch July 2002 Version 2.04 Hardware Installation Guide.
IES-1000 Hardware Installation Guide ii Copyright Copyright IES-1000 Integrated Ethernet Switch Copyright © 2002 by ZyXEL Communications Corporation. The contents of this publication may not be repro.
IES-1000 Hardware Installation Guide ZyXEL Limited Warranty iii ZyXEL Limited W arranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase.
IES-1000 Hardware Installation Guide iv Customer Support Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwid.
IES-1000 Hardware Installation Guide T able of Contents v T able of Content s Copyright ...................................................................................................................................................................
IES-1000 Hardware Installation Guide vi T able of Contents 6.1 System S tartup ................................................................................................................. .......................... 6-1 6.1.1 The SYS LED Does Not Turn On .
IES-1000 Hardware Installation Guide Lists of Figures, Diagrams and T ables vii List of Figures Figure 1-1 IES-1000 Building Deployment Example ................................................................................ ............... 1-2 Figure 1-2 Enterprise Application .
IES-1000 Hardware Installation Guide viii Preface Preface Congratulations on your purchase of the IES-1000 Integrated Ethernet switch. This guide shows you how to set up the hardware for your IES-1000. About the IES-1000 The IES-1000 is an integrated Ethernet switch th at multiplexes traffic from up to 16 G.
IES-1000 Hardware Installation Guide IES-1000 Applications 1-1 Chapter 1 IES-1000 Applications This chapter describes IES-1000 applications an d basic operating environment. 1.1 Applications The following are typical DSL multiplexing applications of the IES-1000.
IES-1000 Hardware Installation Guide 1-2 IES-1000 Applications Figure 1-1 IES-1000 Building Deployment Example 1.1.2 Enterprise Application The IES-1000 can also be used in any-sized compan y to multiplex traffic from employee G.SHDSL or ADSL connections to the Internet.
IES-1000 Hardware Installation Guide IES-1000 Applications 1-3 Figure 1-2 Enterprise Application.
.
IES-1000 Hardware Installation Guide Hardware Installation 2-1 This chapter shows you how to install hardware for a free-standing or rack-m ounted scenario. 2.1 Environment The following are the recommended environments for the IES-1000. 2.1.1 Operating Environment Temperature: 0 — 50°C; Humidity: 5% — 95% (non-condensing) 2.
IES-1000 Hardware Installation Guide 2-2 Hardware Installation 2.4.1 Att aching the Mounting Bracket s to the IES-1000 Step 1. Position a mounting bracket on one side of the IES-1000, lining up the four screw holes on the bracket with the screw holes on the side of the unit (see the figure shown next).
IES-1000 Hardware Installation Guide Hardware Installation 2-3 Figure 2-2 Mounting the IES-1000 on a Rack Step 2. Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack. Step 3. Repeat Step 1 and Step 2 to attach the second mounting bracket on t he other side of the rack.
.
IES-1000 Hardware Installation Guide Removing and Installing Network Modules 3-1 This chapter shows you how to remove and install network modules. Each IES-1000 accommodates up to two network modules. Remove and install modules via the front of the IES- 1000.
IES-1000 Hardware Installation Guide 3-2 Removing and Installing Network Modules Figure 3-3 Removing a Network Module from the IES-1000 Chassis 3.2 Inst alling a Network Module Step 1. Hold the module with the network ports facing you an d insert it into an empty slot located on the front of the IES-1000 as shown next.
IES-1000 Hardware Installation Guide Removing and Installing Network Modules 3-3 Figure 3-4 Installing a Network Module into the IES-1000 Chassis The front of the network module must be flush with the front of the IES-1000 after you install a network module or it will not work! Step 3.
.
IES-1000 Hardware Installation Guide Hardware Connections 4-1 Chapter 4 IES-1000 Connections This chapter shows you how and where to make hardware connections. Before you make your hardware connections, make su re that your IES-1000 is safely and securely positioned.
IES-1000 Hardware Installation Guide 4-2 Hardware Connections Figure 4-2 Console Port Connection 4.3 SHDSL Port Connections The SHDSL ports connect to an MDF (Main Distribution Frame) and end-user equipment via telephone wire. • For detailed specifications about the associated RJ-11 connector, refer to the Pin Assignment appendix.
IES-1000 Hardware Installation Guide Hardware Connections 4-3 Figure 4-3 SHDSL Port and MDF Connections Step 3. Connect a different telephone wire to the lowe r port of the MDF using a punch-down tool. Step 4. Connect the other (RJ-11) end of the telephone wire to the end-user G.
IES-1000 Hardware Installation Guide 4-4 Hardware Connections Figure 4-4 SHDSL Port, MDF and User Equipment Connections Notes About MDFs (Main Distribution Frames) An MDF is usually installed between end-users’ equipment and the telephone company (CO) in a basement or telephone room.
IES-1000 Hardware Installation Guide Hardware Connections 4-5 Figure 4-5 Magnified View of MDF Wiring Connect wiring from end-user equipment to the lower por ts of an MDF using a telephone wire. Connect wiring from the telephone company to the upper ports of an MDF (see the previous figure).
IES-1000 Hardware Installation Guide 4-6 Hardware Connections Figure 4-6 AAM1008 Installation Overview You can also use RJ-11 connectors on both ends of the telephone cables connect directly to an ADSL modem(s) or patch panel. This chapter discusses connections using MDFs.
IES-1000 Hardware Installation Guide Hardware Connections 4-7 Figure 4-7 Installation Scenario A Procedure T o Connect T o An MDF Step 1. Connect the RJ-11 connector end of a telephone wire to one of the USER ports on the AAM1 008. Step 2. Connect the other end of the telephone wire to th e upper ports of the MDF using a punch-down tool.
IES-1000 Hardware Installation Guide 4-8 Hardware Connections Figure 4-8 One MDF for End-user and CO Connections Please refer to the following figure for the connection schema. MDF 1 is the original MDF used for telephone connections only. MDF 2 is used for telephone connections only.
IES-1000 Hardware Installation Guide Hardware Connections 4-9 Figure 4-9 Installation Scenario B Procedure T o Connect T o MDFs Step 1. Acquire two additional MDFs (MDFs 2 and 3). Step 2. Connect the RJ-11 connector ends of telephone wires you want for ADSL service to the USER ports on the AAM1008.
IES-1000 Hardware Installation Guide 4-10 Hardware Connections 4.4.4 Installation Scenario C Phone service is also available but there are two MDFs; one for end-user telephone lin e connections and the other one for CO telephone line connections (see the following figure).
IES-1000 Hardware Installation Guide Hardware Connections 4-1 1 Figure 4-11 Installation Scenario C Procedure T o Connect T o MDFs Step 1. Acquire two additional MDFs (3 and 4). Step 2. Connect the RJ-11 connector ends of telephone wires you want for ADSL service to the USER ports on the AAM1008.
IES-1000 Hardware Installation Guide 4-12 Hardware Connections Connect the top ports of MDF 1 to the telephone company. 4.4.5 LAN Port (Ethernet) Connection Connect the LAN port of your SAM1008 to an Ethernet WAN switch using a st raight-through Category 5 UTP (Unshielded Twisted Pair) cable with RJ -45 connectors.
IES-1000 Hardware Installation Guide Hardware Connections 4-13 Make sure you use a 100-240VAC/1A, 50/60Hz power source. Figure 4-13 Connecting the Power Cord to the IES-1000 and a Power Source.
.
IES-1000 Hardware Installation Guide T urning On Y our IES-1000 5-1 Chapter 5 Tu r n i n g On Y our IES-1000 This chapter discusses the fans and LEDs of the IES-1000 after you turn it on. 5.1 Introduction Before turning on your IES-1000, m ake sure you: • Have attached a computer to the IES-1000 serial port as explained previously.
IES-1000 Hardware Installation Guide 5-2 T urning On Y our IES-1000 5.2 Network Module Front Panel LEDs The following figures show the front panels of the network modules. LEDs describe the operational status of your network module. Please also refer to the Hardware Troubleshooting chapter to see how LEDs may aid in troubleshooting.
IES-1000 Hardware Installation Guide Hardware T roubleshooting 6-1 This chapter explains how to troubleshoot IES-1000 hardware. Refer also to the Troubleshooting chapter in the User’s Guide . 6.1 System S t artup When you turn on the IES-1000, it automatically runs a self-test that takes approximately 20 seconds.
IES-1000 Hardware Installation Guide 6-2 Hardware T roubleshooting 6.3 The SHDSL LED(s) Do Not T urn On The SHDSL LEDs show the operational status of SHDSL port co nnections. If the SHDSL LED is off, it means the link to the SHDSL modem/router is down or there is not a connection to the SHDSL po rt.
IES-1000 Hardware Installation Guide Hardware T roubleshooting 6-3 Table 6-4 ADSL LED Troubleshooting STEP CORRECTIVE ACTION 9 If your line quality is low, you may need to select slower upstream and do wnstream line rates for both the IES-1000 and CPE sides.
.
IES-1000 Hardware Installation Guide Appendix A Removing and Installing a Fuse A Appendix A Removing and Inst alling a Fuse This appendix shows you how to remove and install fuses fo r the IES-1000.
IES-1000 Hardware Installation Guide B Appendix A Removing and Installing a Fuse Step 3. Using a small flat head screwdriver, gently pry open t he right side of the fuse housing (located t o the left of the power cord port receptacle) as shown next. Diagram 2 Opening the Fuse Housing Step 4.
IES-1000 Hardware Installation Guide Appendix A Removing and Installing a Fuse C Diagram 3 Locations of the Installed and Spare Fuses Step 5. Remove the burnt-out fuse from the IES-1000. A burnt-out fuse is blackened, darkened or cloudy inside its glass casing.
IES-1000 Hardware Installation Guide D Appendix B PIN Assignments Appendix B Pin Assignment s Mini RJ-1 1 4P4C (Console Port) Pin Assignment s Diagram 4 RJ-11 4P4C (Console Port) Pin Assignments RJ-1 .
IES-1000 Hardware Installation Guide Appendix B PIN Assignments E Note that a 2, 4 or 6 pin connector can be used with this port provided pins 3 and 4 connect to a SAM1008 SHDSL port.
IES-1000 Hardware Installation Guide F Appendix C Hardware S pecifications Appendix C Hardware S pecifications Physical Interfaces IES-1000 • Two slots for a total of up to two hot-swappable xDSL ne.
IES-1000 Hardware Installation Guide Appendix C Hardware S pecifications G • One AAM1008 = 1.1 kg Power Consumption • 60 w atts max imu m • 100-240VAC/1A, 50/60Hz Fuse Rated • T3A 250VAC Opera.
.
IES-1000 Hardware Installation Guide Index I Index # #2 Philips screwdriver ............................. 2-1, 2-2, 2-3 1 10 Mbps Ethernet ................................................... 5-2 100 Mbps Ethernet ......................................
IES-1000 Hardware Installation Guide J Index I IES-1000................................................................. viii Installing a Network Module .................................. 3-2 Installing Fuses .........................................
IES-1000 Hardware Installation Guide Index K SYS LED................................................................ 6-1 T Telnet ..................................................................... 4-1 Temperature ...................................
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications IES-1000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications IES-1000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications IES-1000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications IES-1000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications IES-1000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications IES-1000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications IES-1000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications IES-1000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications IES-1000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
