Benutzeranleitung / Produktwartung EES-1024AF des Produzenten ZyXEL Communications
Zur Seite of 99
EES-1024AF Intelligent Ethernet Switch December 2002 User’s Guide.
EES-1024AF Intelligent Ethernet Switch ii Copyright Copyright Copyright © 2002 by ZyXEL Co mmunications Corporation The contents of this publication may not be reproduced in any part or as a whole, t.
EES-1024AF Intelligent Ethernet Switch ZyXEL Limited Warranty iii ZyXEL Limited W arranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase.
EES-1024AF Intelligent Ethernet Switch iv Interference S tatements and W arnings Interference Statements and Warnings FCC Interference St atement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
EES-1024AF Intelligent Ethernet Switch Customer Support v Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwi.
.
EES-1024AF Intelligent Ethernet Switch T able of Contents vii T able of Content s Copyright ...............................................................................................................................................................
EES-1024AF Intelligent Ethernet Switch viii T able of Contents 4.2 Establishing the Console Port Connection ................................................................................... ................... 4-1 4.2.1 Initia l Screen .............
EES-1024AF Intelligent Ethernet Switch T able of Contents ix 7.12 Port Mirror (Sniffer) ..................................................................................................... ............................... 7-13 7.13 IP Config .........
.
EES-1024AF Intelligent Ethernet Switch List of Figures xi List of Figures Figure 1-1 Backbone Application ................................................................................................ ............................. 1-4 Figure 1-2 Bridging Application .
EES-1024AF Intelligent Ethernet Switch xii List of Figures Figure 7-2 W eb Configurator - Statistics ....................................................................................... ............................ 7-2 Figure 7-3 W eb Configurator - VLAN .
EES-1024AF Intelligent Ethernet Switch List of T ables xiii List of T ables T able 2-1 The LED Descriptions................................................................................................. .............................. 2-2 T able 3-1 EM1024A-8TP LED Description.
.
EES-1024AF Intelligent Ethernet Switch List of Diagrams xv List of Diagrams Diagram 1 Internet Explorer 5.0 ..................................................................................................................................A Diagram 2 IE5.
.
EES-1024AF Intelligent Ethernet Switch Preface xvii Preface Congratulations on your purchase of the EES Series of Intelligent Ethernet Switches. This preface introduces you to the EES Series and discusses the organization and conventions of this User’s Guide.
.
Getting Ready I Part I: Getting Ready This part acquaint s you with the features and applications of the EES-1024AF Intelligent Ethernet Switch, instructs you how to make the hardware connections, understand the front panel LEDs and introduces the SMT (System Management T erminal).
.
EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-1 The EES-1024AF Intelligent Switch is desi gned to provide your network with Ethernet, Fast Ethernet, Gigabit Ethernet connectivity over twisted pair and fiber optic cab ling.
EES-1024AF Intelligent Ethernet Switch 1-2 Getting to Know the EES 1024 • IGMP and Sniffer (Port Mirr oring) supported • Port Priority - 802 .1p & TOS (Type of Service) supported • Static Address Table for manual address addition • Broadcast Storm Filter function supported • Firmware upgradeable through TFTP 1.
EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-3 1.4.3 SNMP Network Management Simple Network Management Protocol is a protocol u sed for exchanging management information between network devices. SNMP is a member of the TCP/IP protoc ol suite.
EES-1024AF Intelligent Ethernet Switch 1-4 Getting to Know the EES 1024 Figure 1-1 Backbone Application 1.5.2 Bridging Example For enterprise networks where large data broadcasts are c onstantly processed, the switch is an ideal solution for department users to connect to the corporate backbone.
EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-5 Figure 1-2 Bridging Application Full-duplex mode operation only applies to point-to-point access (for example, when attaching the switch to a workstation, server, or another switch).
EES-1024AF Intelligent Ethernet Switch 1-6 Getting to Know the EES 1024 Figure 1-3 High Performance Switched Workgroup Application 1.5.4 IEEE 802.1Q VLAN Application The switch supports up to 4095 tag-based IEEE 802.
EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-7 Figure 1-4 VLAN Workgroup Application Shared Server The switch’s compliance to the IEEE802 .1Q tagging VLAN standard allows ports to exist in multiple VLANs for shared resources, such as servers, printers, or Switch-to-S witch connections.
EES-1024AF Intelligent Ethernet Switch 1-8 Getting to Know the EES 1024 Figure 1-5 Shared Server In this example, stations in different VLANs share resources. As a result, VLAN 1 and VLAN 2 can access VLAN 3 for printing. All VLAN port members of VLAN3 can see the broadcasts from ports configured in VLAN3.
EES-1024AF Intelligent Ethernet Switch Hardware Connections 2-1 This section describes the hardware of the EES-1024AF Intelligent Switch, and gives a functional overview of the switch.
EES-1024AF Intelligent Ethernet Switch 2-2 Hardware Connections Console Port Console management can be done through the Conso le Port. It requires a direct connection between the switch and a computer via a RS-232 cable. LED Indicators All LED indicators are located on the front panel of the sw itch.
EES-1024AF Intelligent Ethernet Switch Hardware Connections 2-3 Figure 2-3 The Rear Panel of the switch Power On After all network cables are connected, plug the power cord into the power socket on the back panel and the other end into a power outlet.
EES-1024AF Intelligent Ethernet Switch 2-4 Hardware Connections Step 4. Remove the adhesive backing from the supplied rubbe r feet. Step 5. Attach the rubber feet to each corner on the botto m of the EES-1024AF. These rubber feet help protect the EES-1024AF from shock or vibration and en sure space between devices when stacking.
EES-1024AF Intelligent Ethernet Switch Hardware Connections 2-5 Figure 2-6 Mount the switch in an EIA standard 19-inch Rack.
.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-1 3.1 Introduction 1 With the EES switch’s two expansion slots, you can use optional modules that allow your EES switch to provide 10/100 Mbps and 1000 Mb ps connections to other compatible netw ork devices.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-2 Optional Modules • Supports store-and-forward switching • Supports non-blocking and full wire speed forwarding rate • 4K-entry MAC address table • 100M, LK/ACT, FD/COL LEDs • Supports SNMP management Front Panel LEDs There are three types of LEDs for each RJ-45 port.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-3 • 128Kb memory buffer sharing • Supports store-and-forward switching • Supports half-duplex and full-duplex m odes at 10/100 Mbps on MII interface • 1000M, 100M, LK/ACT and FD/COL LEDs Front Panel LEDs There are four LEDs for the RJ-45 port.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-4 Optional Modules 3.4.2 EM1024A-4FX-SC: 4-Port 100Base-FX (Multi-mode) Intelligent Fiber Module Figure 3-4 EM1024A-4FX-SC Front Panel F.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-5 3.4.4 EM1024A-4FX-SC-30: 4-Port 100Base-FX (Single-mode) Intelligent Fiber Module Figure 3-6 EM1024A-4FX-SC-30 Front .
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-6 Optional Modules 3.5 Gigabit 1000Base-X Intelligent Fiber Module Series 3.5.1 EM1024A-SX-SC: Gigabit 1000Base-SX Intelligent Module Fi.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-7 • LK, ACT, FD and COL LEDs • Supports connection distance of up to 10 kilom eters (usi ng 9/125um Single-m ode fiber) via fiber optic cable. • Support SNMP management Front Panel LEDs There are four LED indicators for the fiber port.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-8 Optional Modules Figure 3-10 Inserting the optional module Never force, bend or twist the optional modules into the expansion slots. Step 6. Turn on the switch. The switch automatically detects the installed optional module.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Introducing the SMT 4-1 This chapter introduces the basics of SMT. 4.1 Connecting to the Console Port The Console configuration (out of ba.
EES-1024AF Intelligent Ethernet Switch 4-2 Introducing the SMT Figure 4-2 Parameter settings of communication parameters in Hyper Terminal Table 4-1 Field Values for Hyper Terminal in Windows FIELD VALUE Baud Rate 9600 bps Data Bits 8 Parity none Stop Bit 1 Control flow None 4.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Introducing the SMT 4-3 4.3 Navigating the SMT Interface The SMT (System Management Terminal) is the interface you use to manage your switch through the Console port or Telnet.
EES-1024AF Intelligent Ethernet Switch 4-4 Introducing the SMT Table 4-3 SMT Main Menu Summary # MENU TITLE DESCRIPTION 4 Spanning Tree Protocol Use this menu to enable or disable the Spanning Tree Protocol and show the port status. 5 Broadcast Storm Filter Use this menu to enabl e or disable the Broadcast Storm filters.
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Introducing the SMT 4-5 The SMT will return to the Device Settings screen. You should see your new user name and the password will be shown as “********”. 4.4.2 Enable Console Login ZyXEL strongly recommend that you enable the console login feature for security.
EES-1024AF Intelligent Ethernet Switch 4-6 Introducing the SMT Figure 4-7 SMT – Save Current Settings 4.5.2 Reboot Y our EES-1024AF Follow the steps to reboot the switch. Rebooting will make all new settings take effect. Step 1. Enter “r” from the SMT main menu.
Getting S tarted II Part II: Getting Started This part shows you how to configure the basic setup using the SMT menus and introduces you to the Web Configurator .
.
EES-1024AF Intelligent Ethernet Switch General Setup Using the SMT 5-1 This chapter shows you basic config uration using the SMT. 5.1 Ethernet Port Settings Ethernet port connections can be in half-duplex or full - duplex mode. The Ethernet port must use the same speed or duplex mode setting as the peer Ethernet port in order to connect.
EES-1024AF Intelligent Ethernet Switch 5-2 General Setup Using the SMT Table 5-1 Port Settings Fields # FIELD DESCRIPTION EXAMPLE 5 VLAN Tagged The VLAN ID will be tagged to the transmitted packets through the port. No 6 Default VLAN ID Select this option to set the default VLAN ID.
EES-1024AF Intelligent Ethernet Switch General Setup Using the SMT 5-3 Figure 5-3 SMT - Spanning Tree Protocol with Port Status 5.4 Broadcast S torm Filter Follow the steps to enable or disable the broadcast storm filter. Step 1. Enter 5 from the main menu to bring up the Broadcast Storm Filter page.
EES-1024AF Intelligent Ethernet Switch 5-4 General Setup Using the SMT Figure 5-5 SMT - IGMP 5.6 Setting the VLAN Mode Follow the steps to set the VLAN mode. Step 1. Enter “v” from the main menu to open the VLAN Mode page. Step 2. Enter one of the two modes at the prompt.
EES-1024AF Intelligent Ethernet Switch General Setup Using the SMT 5-5 5.8 Configure Secure IP Addresses When the secure IP for Telnet or HTTP is enabled, only tho se IP address(es) specified in this screen will be able to Telnet to the switch or login using th e Web Configurator.
.
EES-1024AF Intelligent Ethernet Switch Using the Web Configurator 6-1 This section introduces the configuration and functions of the Web Configurator. 6.
EES-1024AF Intelligent Ethernet Switch 6-2 Using the Web Configurator 6.3 Navigating the W eb Configurator 6.3.1 T ask Bar The task bar displays at the left of all web pages provides a consistent way to access all program functions. Figure 6-2 Web Configurator - Navigation Bar 6.
EES-1024AF Intelligent Ethernet Switch Using the Web Configurator 6-3 Figure 6-3 Web Configurator - Front Panel A yellow “X” indicates a port is disabled. To view port information, click on the ports to open the Ports page. See 7.1 Port Management for information on config uring the ports.
EES-1024AF Intelligent Ethernet Switch 6-4 Using the Web Configurator Figure 6-4 Web Configurator - Home Table 6-3 Home Page Field Description FIELD DESCRIPTION EXAMPLE System Name Displays the descriptive name for identification purposes. EES 1024AF System Location The physical loca tion of the switch.
EES-1024AF Intelligent Ethernet Switch Using the Web Configurator 6-5 6.5 Modules Modules page shows the modules that have been insta lled into the switch. There are fixed 24x 10/100 Base-TX ports in Module 0, and another 2 slot ( m odule 1 and m odule 2 ) used for expansion.
.
Advanced Applications and Management III Part III: Advanced Applications and Management This part shows you how to use the advanc ed features of the W eb Configurator .
.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-1 7.1 Port Management Inside the Ports page, you can enable or disable, configure sp eed and duplex, and assign VLAN ID to each port. The Port Management table shows the port status of all ports.
EES-1024AF Intelligent Ethernet Switch 7-2 Advanced Web Management Table 7-1 Port Management Field Description FIELDS DESCRIPTION Flow Control When this option is selected, the sw itch sends a PAUSE message to the device to pause the transmission when the buffer in the switch is full.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-3 Table 7-2 The Statistics Field Description FIELD DESCRIPTION Bytes RX The total bytes received from that port Bytes TX The total byte.
EES-1024AF Intelligent Ethernet Switch 7-4 Advanced Web Management 7.3 VLAN ( V irtual LAN ) A VLAN ( Virtual LAN ) is a group of switching ports designated by the switch as belonging to the same broadcast domain.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-5 >> Click this button to display the next two VLANs << Click this button to display the previous two VLANs >>| Click.
EES-1024AF Intelligent Ethernet Switch 7-6 Advanced Web Management 7.5 STP (S panning T ree Protocol) Spanning tree is a link management protocol that pro vi des path redundancy while preventing undesirable loops in the network. For Layer 2 Ethernet network to function properl y, only one active path must exist between two stations.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-7 Table 7-4 STP Fields Descriptions FIELD DESCRIPTION The Current Spanning Tree Root describes the unique root switch information for the instance of spanning tree. MAC Address The MAC address of the root switch.
EES-1024AF Intelligent Ethernet Switch 7-8 Advanced Web Management 7.6 Port Security When a computer accesses a port on the switch, the MAC a ddress of that computer is entered in the MAC address table of that port. Port Security allows you to restrict the number of MAC addresses residing in a port.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-9 7.7 Port Priority – 802.1p There are two priority queues ( high and low ) on each port. Each port arbitrates between two transmit queues (high and low priority). The arbitration uses weighted round-r obin between the high and low priority queues, and you can adjust this weight.
EES-1024AF Intelligent Ethernet Switch 7-10 Advanced Web Management port. Please check the corresponding mapping checkbox to assi gn a high priorit y or uncheck that to assign a low priority. The old 48310 and 48 320 modules do not support this fun ction.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-1 1 Figure 7-9 Web Configurator - IGMP 7.10 S tatic Address You can lock a certain MAC address ( associated with a host, ) to a certain port. Once the MAC address is locked to a specific port, this MAC address will not receive any packets if it is moved to another port.
EES-1024AF Intelligent Ethernet Switch 7-12 Advanced Web Management Figure 7-10 Web Configurator - Static Address 7.11 Broadcast S torm Filter Storm filter avoids flooded data packets.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-13 Figure 7-11 Web Configurator -Broadcast Storm Filter 7.12 Port Mirror (Snif fer) Port Mirror (Sniffer) mirrors traffic (all frames) from a speci fic resource port to a target port.
EES-1024AF Intelligent Ethernet Switch 7-14 Advanced Web Management Figure 7-12 Web Configurator - Port Mirroring 7.13 IP Config You can change the IP address, subnet mask and default gateway of the ma naged node. You can also modify the fields from the RS232 console.
EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-15 Figure 7-13 Web Configurator - IP Config 7.14 SNMP You can manage the switch using a third-party SNMP ( Simple Network Managem ent Protocol ) agent. The community strings control the access rights to the SNMP agent.
EES-1024AF Intelligent Ethernet Switch 7-16 Advanced Web Management Figure 7-14 Web Configurator - SNMP.
EES-1024AF Intelligent Ethernet Switch Configuration and Firmware Maintenance 8-1 This chapter shows you how to save, reboot, reset and upgrade new firmware to the switch using the Web Configurator. 8.1 Save and Reboot 8.1.1 Save You can save current settings by selecting Current Settings then clicking Apply next to the checkbox.
EES-1024AF Intelligent Ethernet Switch 8-2 Configuration and Firmware Maintenance Figure 8-1 Web Configurator - Save & Reboot 8.3 Upgrade Follow the steps below to upgrade the firm ware of the managed unit using the Web Configurator. Step 1. Download the latest firmware from ZyXEL website ( http://www.
EES-1024AF Intelligent Ethernet Switch Configuration and Firmware Maintenance 8-3 Figure 8-2 Web Configurator - Upgrade Do NOT shut down the switch if you can't upgrade your new firmware successfully. Try the upgrade process again. Contact local customer support if any problem occurred.
.
Additional Information IV Part IV: Additional Information This part cont ains the troubleshooting, the appendices and the index..
.
EES-1024AF Intelligent Ethernet Switch T roubleshooting 9-1 9.1 Console Port I cannot access the switch using the Console Port. Table 9-1 Troubleshooting Console Port STEPS CORRECTIVE ACTION 1 Check to see if the switch is connected to your comput er using the RS-232 cable.
EES-1024AF Intelligent Ethernet Switch 9-2 T roubleshooting The Web Configurator does not show properly in Internet Explorer. Table 9-4 Troubleshooting Internet Explorer STEPS CORRECTIVE ACTION 1 Make sure you are using Internet Explorer 4.0 or Netscap e Communicator 4.
EES-1024AF Intelligent Ethernet Switch Microsoft Internet Explorer Setup A Appendix A Microsof t Internet Explorer 5.0 Setup This appendix shows you how to enable Java applet secur ity option in Internet Explorer 5.
EES-1024AF Intelligent Ethernet Switch B Microsoft Internet Explorer Setup Diagram 3 IE5.0- Add Trusted Site IP Address Step 8. In the Internet Options window, click Custom Level . Step 9. Scroll down to the Microsoft VM option. Under Java Permissions select Custom .
EES-1024AF Intelligent Ethernet Switch Microsoft Internet Explorer Setup C Diagram 5 IE5.0 – Edit Permissions Step 12. Click Yes to change the security settings then click OK to close all settings windows.
.
EES-1024AF Intelligent Ethernet Switch Product S pecifica t ions E Appendix B Product S pecifications This section provides the specifications of EES-1024AF Intelligent Switch and optional modules. Diagram 7 General Product Specifications Standards • IEEE802.
EES-1024AF Intelligent Ethernet Switch F Product S pecifications Diagram 7 General Product Specifications Full/Half Duplex • Full/half duplex for 10/100Mbps speed s • Full duplex only for Gigabit .
EES-1024AF Intelligent Ethernet Switch Product S pecifica t ions G Diagram 8 Performance and Management Specifications • VLAN MIBs (RFC 2674)(Future Upgrade) • ZyXEL Private MIB Console Port DB-9 RS-232 Diagram 9 Physical and Environmental Specifications Ventilation Main switch: 2 DC fans Weight Main switch: 4.
EES-1024AF Intelligent Ethernet Switch H Product S pecifications Diagram 10 Optional Modules Specifications 10/100Base T module EM1024A-8TP 8 x 10/100 RJ-45, with Auto MDI/MDI- X 100m 100FX module EM1.
EES-1024AF Intelligent Ethernet Switch Index I Index A Address Table................................................................. 5-2 Auto MDI/MDIX ........................................................... 2-1 auto-sensi ng......................
EES-1024AF Intelligent Ethernet Switch J Index J Jabber ............................................................................. 7-3 M MAC address ............................................................... 7-11 MAC Address ..................
EES-1024AF Intelligent Ethernet Switch Index K T Telnet.............................................................................. 9-1 TOS ..................................................... See Type Of Service Troubleshooting Console Port.......
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications EES-1024AF (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications EES-1024AF noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications EES-1024AF - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications EES-1024AF reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications EES-1024AF erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications EES-1024AF besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications EES-1024AF verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications EES-1024AF. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications EES-1024AF gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
