Benutzeranleitung / Produktwartung BCZ2610DL des Produzenten Zenoah
Zur Seite of 16
GB-1 G B BCZ2610DL BCZ2610DL G B OWNER’S MANUAL BRUSHCUTTER 848JPX93A0 (801).
GB-2 BCZ2610DL EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF DAMAGING HEARING W ear head, ey e and ear protection. Husqvarna Zenoah Co.
GB-3 G B BCZ2610DL SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern cr itical points which must be taken into consideration to pre vent possib le serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and f ollow them without f ail.
GB-4 BCZ2610DL 2. Specification Overall size (L W H) ........................................................... 1830 x 400 x 365 mm Dry weight ...................................................................................................
GB-5 G B BCZ2610DL 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions.
GB-6 BCZ2610DL 5. For safe operation contact with any obstacle when the engine starts. W ARNING Never place the thr ottle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its original position.
GB-7 G B BCZ2610DL • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area.
GB-8 BCZ2610DL MIN SP ACING About 48 cm SUSPENSION POINT arrow mark 6. Set up SUSPENSION POINT NOTE Be the SUSPENSION POINT in the location of the arrow mark. INST ALLING HANDLE NOTE The handle is put during the arrow mark. • Mount the handle to the shaft tube and suspension point it at a location that is comfortable to you.
GB-9 G B BCZ2610DL 7. Fuel ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENO AH genuine oil) • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq.
GB-10 BCZ2610DL ST ART Stop Start Stop switch W ARNING The product is equipped with a centrifugal c lutch mechanism, so the cutting attachment begins to r o- tate as soon as the engine is started by putting the throttle into the start position.
GB-11 G B BCZ2610DL ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.
GB-12 BCZ2610DL CUTTING WORK (LINE HEAD USAGE) W ARNING 1. Alwa ys wear eye pr otection such as saf ety goggles. Ne ver lean over the r otating cutting head. Rocks or other debris could be thr own into e yes and face and cause serious personal injury .
GB-13 G B BCZ2610DL 9. Maintenance BLADE • Check the blade and the fasteners for looseness, cracking, or bending. • Check the cutting edges and reform with a flat file. (A) Saw blade (B) 8-teeth blade (C) 3-teeth blade Point : 1. Keep the end corner sharp.
GB-14 BCZ2610DL IMPORT ANT • Note that using any spark plug other than those desig- nated may result in the engine failing to operate properly or in the engine becoming overheated and damaged. • To install the spark plug, first turn the plug until it is finger tight, then tighten it a quar ter turn more with a sock et wrench.
GB-15 G B BCZ2610DL Cylinder Intake air cooling v ent • When chec king the machine to make sure that it is okay bef ore using it, chec k the area ar ound the m uffler and remove an y wood c hips or leaves which have attac hed themselves to the brushcutter .
GB-16 BCZ2610DL 12. T r oubleshooting guide Case 1. Starting failure CHECK PROB ABLE CA USES A CTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogg.
Ein wichtiger Punkt beim Kauf des Geräts Zenoah BCZ2610DL (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Zenoah BCZ2610DL noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Zenoah BCZ2610DL - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Zenoah BCZ2610DL reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Zenoah BCZ2610DL erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Zenoah BCZ2610DL besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Zenoah BCZ2610DL verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Zenoah BCZ2610DL. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Zenoah BCZ2610DL gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.