Benutzeranleitung / Produktwartung BiPAC 2072 des Produzenten Billion Electric Company
Zur Seite of 29
BiP AC 2071 HomePlug A V 200 Ethernet Adapter BiP AC 2072 HomePlug A V 200 Ethernet Bridge with AC Pass Through User Manual.
T able of Content s Product Introduction ..................................................................................... 3 Features & Specifications ............................................................................. 3 Getting S tarted .
Product Introduction BiPAC 2071 / 2072 is a networki ng device that utilizes th e existing wiring system as a path to transmit data signa l through the inter-conversion between digital and analog signal.
Vista (32 and 64 bit) RAM 128Mb Power Supplier Specification • Input: 100~240V AC, 50~60Hz Physical Interface • Interface: Ethernet 10/100M (MDI/MDIX) switch • Sync button • Reset button • Power AC Plug (for BiP AC 2071 only) • Power AC socket (f or BiP AC 2072 only) • LED display: - 1.
Getting S t arted Safety W arnings 1. Do not use the adapter in high humidity or high temperature environm ent. 2. Do not open or repair the case yourself. 3. Avoid using this product a nd all its accesories outdoor. 4. Place the adapter on a stable surface.
Hardware Overview BiP AC 2071 BiP AC 2072 Ethernet Port Power Plug AC Outlet / AC Pass-thru (only available in BiP AC 2072 model) Reset Button Sync Button ETH LED 1.0 DET LED Power LED PLC LED The Description of each labeled part is described in the table below .
ETH (Ethernet Link/Act) LED Lit when an Ethernet data signal is transm itted or received. Sync Button Used to establish a LAN ne twork with other Ethernet devices. Reset Button Press this b utton to restore the device conf iguration to factory default.
Sync Button Function: There are 3 types of Sync Button trigger states: 1. Broadcast State: A BiPAC 2071 / 2072 device can provide information for another BiPAC 2071 or 2072 device to join its powerline network group (works even if it is currently the only devi ce existing within the network group).
Scenario 2: A BiPAC 2071 / 2072 device wa nts to join an existing network group BC Device A wants to join a network group “BC” currently consisting of device B and device C. Any devices within the “BC” group can become the “Broadcast State” and device A will be the “Join State”.
Application Illustration Home / Office Setting.
BiP AC 2071 (2072) Utility Inst allation Procedures 1. Place the BiPAC 2071/BiPAC 2072 auto-installation CD into your CD-ROM/DVD-ROM drive and click on Utility for Easy Installation .
2. If you have not installed Microsoft .NET Framework 2.0, click on Install Microsoft .NET Framew ork 2.0 to install this program first before installing BiPAC 2071 (2072) Utility .
Microsof t .NET Framework 2.0 Inst allation 1. After clicking on Install Microsoft .NET Framework 2.0, the Net Framework 2.0 installation wizard will be displayed.
3. Check the Agreement acceptance box then pr ess Install to start the installation. When the installation is complete, click Finish to exit..
.
BiP AC 2071 (2072) Utility Inst allation 1. After clicking on Install the utility for Windows (32-bit / 64-bit), the installation wizard wi ll appear. Click.
2. You may define the location of the insta llation folder using the Browser or use the default location. In addition, you can also choose to install BiPAC 2071 (2072) Utility only for yourself or for all the users who shar e your PC. When all necessary items are properly selected, press to proceed.
3. Press to confirm and start the installation. 4. Wait until the installation process is complete then press to complete the utility setup..
S t arting BiP AC 2071 (2072) Utility Once the BiP AC 2071 (2072) Utility Setup Wizard is insta lled, a shortcut will appear on the desktop. Y ou can start the BiP AC 2071 (2072) Utility by double cli.
Underst anding BiP AC 2071 (2072) Utility Billion BiP AC 2071 (2072) Utility consists of 4 screens accessed through 4 panel tabs. The 4 panels are Main , Privacy , Diagnostics and About located on the top left corner of the program for configuration convenience.
message ‘NO HOMEPLUG ADAPTERS DETECTED’. The lower panel displays all the HomePlug remote devices, detected on the current network. The total number of remote devices connected on the same network can be found on top of the Remote device panel.
Password Setup Procedure: 1. To assign a password to a specific device, select the device and click on the Enter Password button at the bottom of the lower panel to call up the Set Device Password dialog box. 2. Then type in the password in the blank provided and press OK.
Add New HomePlug Device to a Pow erline Network Additionally , when there is more than one powerline networ k present, a new HomePlug device can be added to any sp ecific powerline network as desired. T o add a new device to a network: 1. Press the Add button.
Privacy T ab Privacy T ab is to allow user the convenience to manage the secu rity of the private powerline network and to enable the adding of new HomePlug device to the private network. All HomePlug devices are shipped usi ng a default logical network name “HomePlugA v”.
network, rendering the local de vice unable to communicate w ith other devices in its previous network. Set All Devices button is used to change the logical network of all devices that appear on the Main tab screen whose Device Passwor d had been entered for the same logical network.
Diagnostics T ab The Diagnostics T ab screen shows System informati on and a history of all remote devices seen over a period of time. Th is screen is availab le for OEM/ODM Customization.
The Lower panel contains a history of all remote devices seen on the computer over a certain period of tim e. All devices that we re on the powerline netw ork are listed here along with a few other parameters.
About T a b The About screen shows the software version and provides the HTML link to the Billion of ficial website. Clicking on the web address field will open a web browser that link directly to the web site.
T roubleshooting Problem: My Homeplug device is unable to det ect my other HomePlug device. Solution: This may due to the accidental change of the device p a ssword. Access the HomePlug A V Utility and select the Privacy T ab. Enter the password “ HomePlugA V ” (Case Sensitive) in the blank provided.
Ein wichtiger Punkt beim Kauf des Geräts Billion Electric Company BiPAC 2072 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Billion Electric Company BiPAC 2072 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Billion Electric Company BiPAC 2072 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Billion Electric Company BiPAC 2072 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Billion Electric Company BiPAC 2072 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Billion Electric Company BiPAC 2072 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Billion Electric Company BiPAC 2072 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Billion Electric Company BiPAC 2072. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Billion Electric Company BiPAC 2072 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
