Benutzeranleitung / Produktwartung DP-H1 des Produzenten Beyonwiz
Zur Seite of 118
USER GUIDE DP-H1.
Contents.
Welcome Message i Welcome Message Thank you for choos ing a DP-H1, th e high-defin it ion media play er . The DP-H1 su pports the features of the conventional d igital broadc asting receiver (STB, Set.
Precaution ii Precaution Read this manual carefully before using this product. The cautions described below contain important information about safety , and are categorized into: Danger , W arning and Notice. The company will not be responsible for accidents or damage resulting from careless handling by the user .
Precaution iii WARNING If the product is mishandled, th e user might receiver a serious or minor injury. Damage or loss to the user’s property may also occur. z The pro duct must not be exposed t o water or li quid. If the a pparatus is exposed to drips or splashes, it might cause a problem that may not be re pa i rabl e.
Precaution iv This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This page intentionally left as blank..
Contents Contents Welcome Message i Precaution ii 1. Package Contents 1 2. Introduction 3 1. DP-H1 Highlights 3 2. Front Panel 4 3. Rea r Pan e l 4 4. Front Display Window 5 5. R emote Control 6 5-1. Operating DP-H1 6 5-2. Operating TV set 7 5-3. Remo te Control HEXA Code 9 3.
Contents 2. Service Edit 42 2-1. Service List Edit 42 2-2. Fa v o r i t e G r o u p 4 3 3. PVR Functions 45 3-1. Time-shifting 45 3-2. A-B Re p ea t 47 3-3. Instant Recording 48 3-4. Timer 52 3-5. Reco rding Conflict 56 4. EPG (Electronic Progr am Guide) 59 4-1.
This page intentionally left as blank..
Package Contents 1 1. Package Contents The following elements are in cluded in the gift box. Please check all package contents before using your product.
2 This page intentionally left as blank..
Introduction 3 2. Introduction 1. DP-H1 Highlights As a HD (High Def inition) media pl ayer , the DP- H1 supports v arious ways of co nnecting to HD TVs and audio systems; HDMI port combining with HD video decoders, which support MPEG-2, MPEG-4, H.264 and WMV9, give you the true HD digital A/V environment.
Introduction 4 2. Front Panel Five buttons are placed on the f ront panel. z ST ANDBY Button: it switches the DP-H1 between the operation and standby modes. z CHANNEL Buttons: the top and bottom parts of the circular button work as the channel-up and ch annel-down buttons.
Introduction 5 4. Front Display Window The front display win dow gives you easy way to check the status of the DP-H1. 1 Lights when t here is no time info rmation. 2 Lights when a timer rec ording is progr ammed in sta ndby mode. 3 Lights wh en th e si g n al co m es out via HD MI.
Introduction 6 5. Remote Control 5-1. Operating DP-H1 In order to operate the DP-H1 with th e enclosed r emote control, please select STB mode by pr essing the STB button. The red backlight beneath t he STB button lights when you press a button in this mode.
Introduction 7 5-2. Operating TV set The enclosed remote control can also be used to control a TV set provided by major TV manufa cturers. In order to operate a TV with the enclosed remote control, please select TV mode by press ing the TV button. The red backlight beneath the TV button lights when you press a button in this mode.
Introduction 8 JVC 207 212 247 264 323 385 LG 208 215 224 229 253 286 307 344 374 385 387 410 412 NEC 205 207 208 215 224 229 248 253 286 389 PANASONIC 208 210 211 212 213 214 216 220 230 236 237 239 .
Introduction 9 5-3. Remote Control HEXA Code The below picture an d right t able infor m you to set your own r emote control to operate the DP-H 1. The co ding system used for the DP-H1 is the NEC type.
10 This page intentionally left as blank..
How to Connect 11 3. How to Connect 1. A/V Connection Depending on your A/V equipment including TV which you would like t o connect to, there are various wa ys you can connect the DP-H1 and A/V equipment. T o make the best connections, please r efer to th e manual of your TV , stereo system or other equipment which you would like to connect to.
How to Connect 12 1-2. Audio Connection T o connect your DP-H1 to your TV or audio system, you hav e the following options; Only one connection can be done at a time. z S/PDIF Digi t a l Au dio outp u t (COAXI AL, OPTIC AL) z 5.1 CH Analog Audio output 2.
How to Connect 13 3. Ethernet Connection 3-1. Connection Using a Ne twork Rout er In order to utilize the DP-H1 fully , it is strongly reco mmended to connect the DP-H1 to the h ome network with a network router . Fo r this connection, the following equipments are required; z A router with a built-in network switch.
How to Connect 14 3-2. Direct Connection to the PC With this configuration, y ou can share contents with a PC thr ough home network but the DP-H1 can not access to Int ernet. For this connection, the following equipment is required; z A PC with Windows XP oper ating system.
How to Connect 15 3-3. Direct Connection to Internet With this configuration, y ou can not share contents with a PC through home network. For this connection, a crossed Ethernet cable (not included in the box) is required. The most ISP (Internet Service Provider) services DHCP feature.
16 This page intentionally left as blank..
STB & PVR Function 17 4. Quick Setup This chapter guides you through the basic set up of the DP-H1 s o that you can experience its basic feature. In order to enjoy the DP-H1 fully , please refer t o Chapter 9. A dvanced Setup. 1. Start Quick Setup If A/V and antenna connection is complete, press the STANDBY button to start.
STB & PVR Function 18 1-1. Quick Setup of Video Output F ormat If the front display window indicates that the DP-H1 is r eady to use but nothing displays on the TV screen, you hav e to adjust the format and resoluti on of t he video ou tput by pressin g the TV-OUT button.
STB & PVR Function 19 1-2. Basic Operation 1) Enter and Exit Setup Menu Y o u can enter the SET -UP MENU with the SET-UP button on the remo te control and exit to the previous oper ation mode such as LIVE or FILE PLA Y with the EXIT button .
STB & PVR Function 20 3) How to Change Configuration In the setup menu, there are sever al ways to change the configuration. This manual explains how to change the configuration, here are three cases which are used frequently . z Selection on a pop-up menu: Y ou can choose an option on the pop-up menu.
STB & PVR Function 21 z On-screen keyboard: If you need to input alphabetic characters, an on-screen keyboard will be displayed. Y ou can move the cursor with the UP/DOWN/LEFT/RIGHT buttons and select the letters with the OK button. The YELLOW and BLUE buttons work as a space and backspace keys respectively .
STB & PVR Function 22 2. Configuration 2-1. Time Setting Please set the current date and time . The date and time information will be the refer ence for th e timer r ecording. Theref ore, you have to configure the time and date information precisely .
STB & PVR Function 23 z Date Format: Please select a display format for the date either “DD/MM/YYYY” , “MM/DD/YYYY” or “YYYY/MM/DD” on a pop-up menu. (DD-day , MM-month, YYYY - year) z Time Format: Please select how to display the time: either a 12-hour format or a 24-hour format.
STB & PVR Function 24 2-2. A/V Output Setting Y o u have to set the video and audio configur ation according to your TV set. Please make sure the video and audio port of the DP-H1 is connected to your TV set. The A/V Output menu consists of two parts; the video output and the audio output.
STB & PVR Function 25 - Pan&Scan: The picture is displayed in full on your 4:3 TV screen, but left an d ri ght sides of the origin a l pi c t u r e c a n not be displayed. z Video T ype: Y ou can select either P AL for NTSC format. Most TV sets support the P AL format in Australia.
STB & PVR Function 26 2) Audio Outputs The DP-H1 supports 5.1ch a udio in an analog format. It has Dolby Digital st ereo decoder so tha t i t can dec ode a nd out put the Dolby s ound through the RCA connectors. It also supports digital outputs wi th optical and coaxial ports.
STB & PVR Function 27 2-3. Service Scan Before watching a broadcasted progr am, you need to scan all the services first. The scanned services will be stored in the non-volatilize memo ry . The refor e you d on’t hav e to scan t he serv ice ag ain un less y ou delete all the information of th e service stored in the memor y .
STB & PVR Function 28 z Start Scan: After selecting your scanning range, yo u can “start scanning” . Select Start Scanning an d then press the OK button. On the screen, the scanning window appears and displays the process. Now , you are ready to w atch live television by pressing the LIVE button.
STB & PVR Function 29 3. Network The DP-H1 supports an Ethernet interfaces. T his section will guide you how to configure the net work interfaces. 3-1. Ethernet Setting The first step is to enable the Ethernet interface. Y o u can select this in the Network Device menu.
STB & PVR Function 30 3-2. Automatic Configuration If you enable the Ethernet interface by selecting the “ LAN” option on the “Network Device” menu, all the items to be configured for the Ethernet interface will be displayed.
STB & PVR Function 31 3-3. Manual Configuration If you select the “Disable” option in the “DHCP” , you have to input the IP address manually . z IP Address: Y ou can input the address with the NUMERIC button s and the LEFT/RIGHT buttons. Y o u can move to the next item of Subnet Mask with the DOWN button.
STB & PVR Function 32 3-4. Ice Guide The DP-H1 supports Ice TV service thro ugh the Internet. If you have an Ice TV account, please set your account to utilize the service on your DP- H1.
STB & PVR Function 33 3-5. WizPNP The WizPNP enables to share the recording files with other bey onwiz produc t s or P Cs . The above picture illustrates how the WizPNP functions; If you set the DP-H1 as a WizPNP client, you can access to another beyonwiz product, wh ich enabl es the WizPNP s erver , and play rec ording files on it.
STB & PVR Function 34 1) Set as WizPNP Client Y o u can set the DP-H1 as a WizPNP client; please select t he “Client” menu with the OK button and select “Enable” with the OK button. Y ou can also disable the WizPNP client function by selecting “Disable” wit h the OK button .
STB & PVR Function 35 5. STB & PVR Function The DP-H1 supports various ways of enjoying multimed ia contents and it groups its features in three parts; the first group is STB (Set-to p Box) an.
STB & PVR Function 36 2) Change Service with Service List The service list contains all the broadcasting services you can receive. Y o u can get the service list a s a pop-up menu by pressing the LIST button and select a service with the UP/DOWN buttons.
STB & PVR Function 37 3) Other Ways t o Change Service As in conventional TV sets, you can change a service which you want to watch or listen to in the following ways; z Service Change with the CH+/CH- buttons: As you press the CH+ or CH- button, the next or previous service will be selected.
STB & PVR Function 38 1-2. Information Box Y o u can check the information of a service and the program using three information boxes; the information box contains specific info rmation of a current service and program. The extended information box contains more details about the current program.
STB & PVR Function 39 1-3. Volume Level Adjust With the VOL+/VOL- buttons, you can adjust the volume level of the analog audio output. The MUTE button will turn off the analog and digital audio outpu ts. NOTE z Y o u can not control the volume level of the digital audio outputs if you set the audio format as “pass -through” .
STB & PVR Function 40 1-5. Subtitle and Teletext Service 1) Subtitle Service If you want to view subtitles on the scre en, please press the SUBTITLE button. T o display the su btitle, pleas e select “Ena ble” and press the OK button. Y ou can hide the subtitle by selecting “Disable” with the OK button.
STB & PVR Function 41 1-6. Sleep Timer You can set the DP-H1 to turn off automatically at a specific time. Press the SLEEP button to set the timer. The DP-H1 will only turn off after a recording has finished even if you set it to turn off before the completion of the current recording(s).
STB & PVR Function 42 2. Service Edit 2-1. Service List Edit Y o u can edit the service list if you want. The followings illustr ate the editing functions you can use to edit a service list. z Lock/Unlock: For your privacy , you can protect certain service from unauthorized access.
STB & PVR Function 43 2-2. Favorite Group F avorite grou p is your per sonal collecti on of T V or radio se rvices . Y ou can organize up to 20 groups including three default groups. 1) Favorite Group Edit Before you use the favorite service groups, you have to organize them.
STB & PVR Function 44 4) Service Change on Favorite Group If you change services using the service list when you select a favorite group, the service list will show the services belong to that fav orite group. Y ou can cha nge am on g these services on the list.
STB & PVR Function 45 3. PVR Functions The DP-H1 does not include an onboard HDD. But it can suppo rt PVR functions such as time-shifting, recording and timer recording with an optional USB stor age. Y o u can also play the programs recorded in the USB stor age.
STB & PVR Function 46 Y o u can jump to a certain position with the LEFT/RIGHT/UP/DOWN buttons. z LEFT/RIGHT butt ons s kips an d mo ves b ackw ard o r fo rwar d 15 seconds at a time respectively .
STB & PVR Function 47 3-2. A-B Repeat The DP-H1 can play a certain section (A-B) re peatedly . Please activate the p rogress bar with the OK button. Place the lower anchor mark at the start position and press the YELLOW button. A new anchor mark with “ A ” will indicates the start position.
STB & PVR Function 48 3-3. Instant Recording 1) Start Reco rding Y o u can record the current service and stor e it in the USB storage instantly by pressing the REC button. The fol lowing picture sh ows options you can choose when you record a program.
STB & PVR Function 49 NOTE z If you disable the time-shifting function, you can’ t record a program from the time-shifting buffer . Theref ore you can only choose a single option of “ Live” when you intend t o record a program.
STB & PVR Function 50 3) Pause/Resume and Stop Recording If you want to skip recording for a certain period of time, i.e. , commercial advertisements, please press the REC button while you are watching the recording service. Once a pop-u p page appears, pl ease press the PAUSE butto n.
STB & PVR Function 51 4) Change Recording Options wh ile Recording Y o u can change the duration of a recording or file name after the recording has started. Y ou can also lock or unlock the recording file while you are recording the service. Pr ess the POP-UP button and select “Recording Info rmation” with the OK button .
STB & PVR Function 52 3-4. Timer Y o u can set programs which you would like to record to USB storage. The timer function can also be used to turn on the DP-H1 an d watch the set program according to your time r reservations. Y ou can s et up to a maximu m 100 timers .
STB & PVR Function 53 2) Add New Timer T o add a timer , pleas e press the RED button to display a menu on the screen. A new pop-up window will appear to c onfigure the timer . Y o u can configure the following items with your preference for a new time record.
STB & PVR Function 54 z Mode: If you would like to watch a certain progr am or tr ansfer it to an external recorder instead of recording it to H DD, please choose “View” option with the LEFT/RIGHT b u t t o n s . I f y o u w a n t t o r e c o r d a program, please s elect “ Record” opti on.
STB & PVR Function 55 4) Delete Timer Select a timer which you want to delete with the UP/DOWN button s and press th e GREEN button. A pop-up confirmation will appear and choose “Y es” with the OK button. If you do not want to delete a timer , choose “No” with the OK button or pr es s EXIT.
STB & PVR Function 56 3-5. Recording Conflict The DP-H1 can record up to two programs simultaneously . If you intend to record more than two pr ograms simultaneously , a w arning pop-up of duplication will be disp layed.
STB & PVR Function 57 2) When New Recording Starts If a new recording starts according to a timer while the DP-H1 records two programs simultaneo usly , t he following pop-up will be displayed. There are two options you can choose if duplication occurs: you can stop one of the current recordings to let a new recording start.
STB & PVR Function 58 NOTE z The ne w record ing has high er prio rity than the existin g recording s. Therefore, when a new recording starts it will stop one of the existing recordings, which ends earlier respectively , if there are no confirmation or cancellation.
STB & PVR Function 59 4. EPG (Electronic Program Guide) The EPG (Electronic Program Guide) is a time table of TV programs which show upcoming programs on a network. The EPG information is supplied by TV broadcasters as an optional service, therefore the DP-H1 can not provide a full EPG if some broadcasters do not provide this information.
STB & PVR Function 60 4-2. EPG with Single Service This EPG shows only one service at a time. You can change to the multiple-service EPG with the RED button. Programs are listed vertically by time. Theref ore you can move cu rsor to the pr evious or next program with the UP/DOWN buttons.
STB & PVR Function 61 4-3. Service Change and Recordin g 1) Service Change If you want to change and watch a certain program, place the cursor on the program you want to watc h and press the OK button. In this case, the thumb-nail screen will be changed and the time-shifting buffer will be refres hed.
STB & PVR Function 62 3) Set timer recording If the cursor is placed on a futu re program, th e REC button sets a timer and the colour of types changes to red to indicate that the program is reserved to be recorded. If a c ertain cell in the EPG has red colour, that program is reserved to be recorded.
File Playback Function 63 6. File Playback Function This chapter covers all functions regarding playing multimedia contents. The DP-H1 can play movie, music and photo files stored in the internal hard disk drive, PCs on the home network, USB storage devices, and memory cards.
File Playback Function 64 2) Step 2: Select Storage With the UP/DOWN buttons, you can select a device to access. As you select a device, folders and files stor ed in that device will be listed on the screen.
File Playback Function 65 The “PC” icon indicates the PC and the “STB” icon indicates the WizPNP server . z USB: Y ou can access any USB devices connected to the DP-H1 by selecting “USB” icon on the left me nu. If ther e is more than one US B devices, all the devices will be listed on the screen.
File Playback Function 66 WARNING z Each USB port can supply maximum of 500mA to the external device. Connecting device s consuming more than 500mA can damage the DP-H1 if there is no a dditional power supplier to the USB device. z The USB device should be d e tached properly to prevent the DP-H 1 from unstable operatio n or damage.
File Playback Function 67 3) Step 3: Exploring Folders and File s Once you select a content type, i.e. , “Movie” and storage or device, i.e. , “Network” , press the OK button to enter the list of folders and/or files (the file list). In the file list, the UP/DOWN buttons mov e the cursor upward or downward to select a folder or file.
File Playback Function 68 2. Contents Playback 2-1. Movie Playback T o play a movie, please select the “ Movie” icon on the top menu and s e l e c t w h a t y o u w a n t t o p l a y o n t h e f i.
File Playback Function 69 1) Trick Mode Powerful trick -operation is supported while you watching a movie. z PLAY button will display a time-bar . It changes to the normal playback mode while other trick mode is enabled such as PAUSE, FF or REW . z PAUSE button will hold the picture until you play again with the PLAY button .
File Playback Function 70 2) A-B Repeat The DP-H1 can play a certain section (A-B) re peatedly . Please activate the p rogress bar with the OK button. Place the lower anchor mark at the start position and press the YELLOW button. A new anchor mark with “ A ” will indicates the start position.
File Playback Function 71 3) Subtitle The DP-H1 can decode and display subtitles from a subtitle file. T o play a movie with subtitle, please copy the subtitle file to the same folder of the movie file and give the same file name as the movie file. The DP-H1 automatically display subtitle when you play a movie with the OK or PLAY button .
File Playback Function 72 2-2. Music Playback Y ou can play music the same way you pla y a movie; please select the “Music” icon on the top me nu to play music. Y ou can utilize the same trick operation for pla ying music which is described in the previous section for playing a movie.
File Playback Function 73 2-3. Photo Playback T o play ph oto file s, please selec t the “Ph oto” ic on on th e top menu. Once the DP-H1 play a photo file, it will play all photos in the folder successively .
File Playback Function 74 2-4. Play-list The play-list is a perso nal c ollection of multimedia contents, which stores the list of files temporarily . Y ou can organize a separate play-list for each media content type: mo vie, music and photo. 1) Add File to Play-list Y ou can organize a play-list and enjoy the contents.
File Playback Function 75 3) Play from play-list Y ou can play files in the play -list by pressing the OK or PLAY button. If you change to the previous or next file in the p l a y-list, press the PREV or NEXT button .
76 This page intentionally left as blank..
File Management 77 7. File Management 1. Rename Y ou can rename a recording file stored on the USB storage. Pleas e select a file on the FLIE PLA Y menu and press the POPUP button. A list of extended menus will be displayed. Please select “Rename” menu with the OK button .
File Management 78 2. Delete Y ou can delete the r ecording files ston ed on the USB storage. Please select a file on the FLIE PLA Y menu and press the POPUP button. A list of extended menus will be displayed. Please select “Delete” menu with the OK button .
File Management 79 3. Backup to USB Storage The registered USB st orage does not compatible to the Windows operating system . Th erefore, you can not backup the recording files stored on the USB sto rage directly connecting to yo ur PC. However , you can copy or move the recording files stored on the USB storage to another USB storage device.
File Management 80 If you confirm, two options will be displayed. Please select “USB” with the OK button. The USB storage devices connected to the DP-H1 will be listed. Please select “USB” with the OK button . The USB storage devices connected to the DP-H1 will be listed.
File Management 81 The RED button will copy or move the files to the selected folder . A progress-bar indicates the status. NOTE z If you cancel to copy or move files, please press the EXIT button . z In order to watch a TV program, pl ease press the LIVE button.
File Management 82 4. Backup to PC via Network Y ou can also copy or move the recording files on the USB storage to a PC connected to your home network. Please select a file on the FLIE PLA Y menu and press the POPUP button. A list of extended menu will be displ ayed.
File Management 83 5. Edit Recording File Y ou can edit the recording file stored on the USB storage whilst you play a recording file on the FILE PLA Y menu. Please activate the progress bar with the OK button. Place the anchor mark at the start position and press the YELLOW button.
84.
Internet Service 85 8. Internet Service The DP-H1 is designed to support various Internet services, however this will be updated at a later time. Y ou can get the latest i nformation for the DP-H1 by visiting the website, www .
86 This page intentionally left as blank..
Advanced Setup 87 9. Advanced Setup As an extension to Cha pter 4. Quick Setup, this chapter illustrates how to configure your DP-H1. The MI SCELLANEOUS and MA NAGEMENT parts will be explained. In this chapter as they were the r emaining two items that were not explained previously .
Advanced Setup 88 1-1. Favorite Before us ing th e favorite s ervice groups, you have t o organ ize them . The edit page consists of three columns: Group, F av . Service and All Service. Once you enter into the list with the OK button, you can place the curs or on one of t he thr ee columns with the LEFT and RIGHT buttons.
Advanced Setup 89 2) Favorite Service According to your selection of the favorite group in the f irst column, the services belonging to the favorite group will be display ed on the second column. Y ou can remove a service from the favo rite group with the OK button.
Advanced Setup 90 1-2. OSD 1) Help Box Display Y ou can hide the help box which is displayed with the service list. If you set this option as “Hide” , the help box does not appear when you press the LIST butto n . 2) Transparency Y ou can set the transparency of the OSD.
Advanced Setup 91 1-3. Access Control Y ou can set a PIN number to access certain set-up menus. After setting a PIN number , y ou have to re-enter the PIN number to ent er the menu again. 1) Set PIN Number Y ou can set 4-digit PIN number with the NUMERIC buttons.
Advanced Setup 92 z Time Setting Menu: If you set this, you have to enter th e PIN nu mber when you change the time and dat e setting. z Network Configuration Menu: If you set this, you have to enter the PIN number when you change the net work configuration.
Advanced Setup 93 2. Management Y ou can upgrade or initialize your DP-H1 in this menu. 2-1. F/W Upgrade 1) Firmware Information Befo re upgrad ing the firm ware, y ou can check t he info rmation and last update. Press the OK button to get the information: System Identit y , Firmware V ersion and Last Update.
Advanced Setup 94 If you select the “Network” option, the PCs and network devices connected to your home network will be displayed. If yo u can not see any device on the list view , please press the RED button to scan the devices. Y ou can also scan a specific network device with its IP address.
Advanced Setup 95 Please select the firmware on the file list and press the OK button to start. It takes sever al minutes to complete upgrading. Please make sure that your DP-H1 is NOT turned OFF until it finishes upgrad in g.
Advanced Setup 96 2-2. HDD 1) Register USB Storage T o use the PVR function, an optional USB storage is required; the USB storage should be registered. If you select “R egister USB H DD” menu with the OK button, the USB devices connected to the DP-H1 will be listed.
Advanced Setup 97 2) Format USB Storage The USB s torage shoul d be re-f orma tted with the DP-H 1 to use it for the PVR functions. If you select “Format USB HDD” menu with the OK button, the USB devices connected to the DP-H1 will be listed. Please press the OK button to format the selected USB storage.
Advanced Setup 98 2-3. Initialize 1) Clear Service Information Y ou can clear all the service information. If you select this wi th the OK button, a pop-up window will be displayed to get yo ur c onfirmation. If you select “YES” all services will be deleted and y ou will hav e to rescan them again.
Troubleshooti ng Guide 99 10. Troubleshooting Guide The remote with the D P-H1 can control other brands. If you wish to Before contacting Beyonwiz T echnical Support, please check the following T roubleshooting Guide and try all possible solutions fo r your problem.
Troubleshooti ng Guide 100 strength and/or quality is optimal. If not, please contact an authorized antenna service agent or licensed contractor to seek advice concerning improving your TV reception. No soun d, or p oor sound z Check the V olu me status of the pr oduct, TV and other audio device/s.
Troubleshooti ng Guide 101 (SetupNetworkSettin g) z Check to ensure that the other devices on you r network are configured correctly to connect with another network device. EPG data is not present in the Guide, or the EPG data in the Guide is incorrect for my region z Do you have an account subscription with an EPG data provider? (eg.
102 This page intentionally left as blank..
Spec ificat ion a Specification Main System Main Processor RISC CPU Tuner & Channel Decoder T uner DVB- T Compliant T uner Input Conn. IEC 169-2 Female T y pe T uner Loop-through Conn. IEC 169-2 Male T ype Frequency Range 174~230MH z, 470~860MH z Signal Lev el -20 ~ -80dBm Aerial Supply 5V , max.
Warranty Conditions b Warranty Conditions 1. Where required by Beyonwiz only the original invoice/receip t issued b y the dealer will be accepted as proof of purchase.
WEEE Information c WEEE Information Correct Disposal of This Product (W aste Electrical & Electronic Equipment) This markin g shown on the prod uct or its literature, in dicates th at it shou ld not be disposed with othe r househo ld wastes at the end of it s working life.
Contact Beyonwiz d Contact Beyonwiz Beyonwiz Australia support@beyonwiz.com.au www .beyonwiz.com.au Some features and information in this manual may differ slightly from the product itself due to firmware version and changes ma de after pri nting.
Contents.
Version 1.2_Eng.
Ein wichtiger Punkt beim Kauf des Geräts Beyonwiz DP-H1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Beyonwiz DP-H1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Beyonwiz DP-H1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Beyonwiz DP-H1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Beyonwiz DP-H1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Beyonwiz DP-H1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Beyonwiz DP-H1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Beyonwiz DP-H1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Beyonwiz DP-H1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
