Benutzeranleitung / Produktwartung PDM 4210 des Produzenten Yamaha
Zur Seite of 52
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.
IMPOR T ANT SAFETY INSTRUCTIONS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR Yamaha High Definition Plasma Monitor Our reputation has been built on the quality, performance, and ease of service of Yamaha High Definition Plasma Monitor. Safety is also foremost in our minds in the design of these units.
1 ENGLISH IMPOR T ANT SAFETY INSTRUCTIONS Read before operating equipment Follow all warnings and instructions marked on this monitor. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water.
2 • FCC (Federal Communications Commission) STATEMENT WARNING (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Electronics Corporation Address: 6660 Orangethorpe Avenue Buena Park, CA.
3 ENGLISH USER’S MANUAL Thank you very much for purchasing the Yamaha High Definition Plasma Monitor. Before using your monitor, please carefully read this manual so you will know how to operate the monitor properly. Keep this manual in a safe place.
4 Large-screen, high-definition plasma display panel The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024(V) pixels, creates a high-definition, large-screen (aspect ratio : 16:9) and low-profile flat display.
5 ENGLISH Never use the monitor if a problem occurs. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing, elements, cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock.
6 CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT .(continued) Be careful in handling the power cord and external connection cables. If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tension to the power cord and cables.
7 ENGLISH CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT .(continued) Note on image retention The plasma monitor illuminates phosphor to display images.
8 CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT .(continued) • Please read this User's Manual thoroughly, especially the "IMPORTANT SAFETY INSTRUCTIONS" and the "CAUTION:READ THIS BEFORE OPERATING YOUR UNIT." and the "PRECAUTIONS" sections.
9 ENGLISH Caution when moving the main unit • As this product is heavy, whenever it is moved, two people are required to transport it safely. • Whenever the unit is moved it should be lifted forwards using the two handgrips at the back, and the unit should then be held at the base on both sides for stability.
AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET 10 Remote control ID SET button 17 POWER OFF button 14 POWER ON button 14 POWER ON/OFF button 14 MENU button 17 MUT.
11 ENGLISH Anti-tumble measures Securing to a wall or pillar Use a commercially available cord or chain, and a clamp to secure the set to a firm wall or pillar. Securing to a desktop 1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the pedestal as shown.
12 Read CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. and PRECAUTIONS ( to ) carefully to ensure maximum safety before proceeding to these steps: • Choose a safe, level location to install the product. • Install the monitor in a location with easy access to a power socket.
13 ENGLISH ① ① Connect the power cord to this device. ② ② Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.
14 OPERA TING INSTRUCTIONS T urning Power On and Off • To turn the monitor power on, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button or the ON/OFF or ON button on the remote control.
15 ENGLISH AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET OPERA TING INSTRUCTIONS (continued) Audio Mute The audio volume can be temporarily muted by pressing the MUTE button of the remote control. • When a button is pressed, the volume adjustment status guide (magenta) will be displayed.
16 Size Switching Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change in sequence and the status will be displayed at the bottom of the screen. * Real mode gives an image of the same shape as it is displayed on a computer monitor.
17 ENGLISH AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET ID SET button ID button AUTO button Using the Menu Scr een (On-screen display system) When the MENU butt.
18 PICTURE MENU OPERA TING INSTRUCTIONS (continued) Picture Audio T imer Function Setup Language Select OK Set Picture Contrast : + 31 Brightness : – 31 Color : 0 T int : + 31 Picture Enhancement : Off Color T emperature : Normal Color T emp.
19 ENGLISH Selected characters Setup hint Audio Mode Movie Music Speech Favorite Movie: This selects the audio mode suitable for Movies. Music: This selects the audio mode suitable for Music. Speech: This selects the audio mode suitable for News, Talk show etc.
20 Picture Audio Tim e r Function Setup Language Select OK Set Function Screen Saver Off Screen Wipe On 60Min. Black Side Panel Off Video Power Save Off Freeze Mode Split Default Zoom Panoramic Reset Reset Select Set Return OK MENU FUNCTION MENU Function Panel Life Normal Mode Display Off ID Number 1 Inverse On 60Min.
21 ENGLISH Selected characters Setup hint Auto Adjust* (Menu) (Adjust) Press the OK button to start automatic regulation. Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are adjusted automatically. Horizontal Position Moves the horizontal position to left.
22 OPERA TING INSTRUCTIONS (continued) LANGUAGE MENU Picture Audio Tim e r Function Setup Language Select OK Set Language English Fran ç ais Espa ñ ol Select Return Exit OK MENU Select a language using the ▼ ▲ SELECT buttons and press the OK button.
23 ENGLISH Signal Check Status Display Action When Mode Display is set to ON, the input signal is switched or when the RECALL button is pressed. A guide is displayed for the input terminal and the horizontal and vertical sync frequency. When the sync signal is no longer detected.
24 NOTES About screen defects • High precision technology is used in the making of plasma display panel but there may be dark spots (points that do not illuminate) and bright spots (points that are too bright) in some cases. These do not indicate a malfunction.
See page 25 ENGLISH Symptoms That Appear to be Failures Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. TROUBLESHOOTING CAUTION Customer servicing can be hazardous. 29 12 12 14 13 30 27 27 10 17 12 18 21 21 Symptom • No picture with the power-indicating lamp off.
21 26 TROUBLESHOOTING (continued) Symptoms That Appear to be Failures (continued) 21 Symptom • The temperature of the display panel surface is high. • There are points (*) on the screen that differ in color from the periphery of the screen.
27 ENGLISH Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only for RGB2) Actions to Correct Abnormal Displays Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (figure 1).
28 Product specifications and designs are subject to change without notice. PRODUCT SPECIFICA TIONS • The monitor takes at least 30 minutes to attain optimal picture quality.
29 ENGLISH Signal Input (continued) 12 3 4 5 67 8 91 0 1 1 1 2 1 3 1 4 1 5 1 6 17 18 19 20 21 22 23 24 PRODUCT SPECIFICA TIONS (continued) DVI terminal (DVI-D) Pin Input signal Pin Input signal 1 T.M.D.S. Data2- 14 +5V Power 2 T.M.D.S. Data2+ 15 Ground (for+5V) 3 T.
30 • The type of video board or connecting cable used may not allow for correct display adjustment of Horizontal Position, Vertica l Position, Horizontal Clock and Clock Phase. • The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it.
31 ENGLISH SUPPLEMENT 015_PDM-4210_U_E 2003.12.24 18:37 ページ 31 ( ブラック 版).
32 Optional Video Unit Function Additional functions when the optional video unit is installed are as follows: ( ) Monitor rear panel Speaker (R) Speaker (L) Pow e r cord (1) Make sure that the power switch of the monitor is turned off. (2) Make sure that the power switch of the imaging device is turned off.
33 ENGLISH OPERA TING INSTRUCTIONS Input Switching AV1 AV2 RGB 1 RGB 2 AV3 MUTE VOL VOL AV4 AUTO PinP OK SIZE RECALL MENU ･ ･ Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control.
34 ATTENTION Using a wide-screen monitor • This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image will appear different from the original. Take this into consideration when making screen mode choices.
35 ENGLISH OPERA TING INSTRUCTIONS (continued) Displaying MUL TI PICTURE If the PinP button on the remote control is pressed MULTI PICTURE will display. Activating the P-in-P mode from the RGB input screen Pressing the PinP button once will display 2 pictures.
36 Picture Audio Time r Function Setup Language Select OK Set Picture Picture Mode Day Contrast +31 Brightness -31 Color 0 Sharpness +15 Tint 0 Color T emperature Normal Contrast Mode Normal Reset Res.
37 ENGLISH OPERA TING INSTRUCTIONS (continued) PICTURE MENU (continued) Selected characters Setup hint Picture Mode Day Night Day: This setting is best for very bright ambient lighting. Night: This setting is for normal lighting conditions. Contrast Narrows the gap between brightness and darkness.
38 OPERA TING INSTRUCTIONS (continued) PICTURE MENU (continued) Selected characters Setup hint Color Management Off On Turn On when the original balance of each color is required to adjust to suit user preferences. Magenta Magenta is weakened. Magenta is strengthened.
39 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU Picture Audio Tim er Function Setup Language Select OK Set Setup System System 2 Color System Video Input Audio Input Scart Output Monitor RGB.
40 OPERA TING INSTRUCTIONS (continued) SETUP MENU (continued) Selected characters Setup hint Audio Input AV1 Stereo L/Mono This should correspond to the audio signal from the equipment that is connected to the AV1 audio input terminal. If the signal is monaural audio, set this to L/Mono.
41 ENGLISH Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. CAUTION Customer servicing can be hazardous. Symptom Point to check See page • The screen becomes dark and the images cannot be seen during VCR special playback (fast forward, rewind).
42 PRODUCT SPECIFICA TIONS (continued) Signal Input ① ② ③ ④ S-input connector pin specifications Pin Input signal 1Y 2 Y-GND 3C 4 C-GND Frame GND 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 .
43 ENGLISH Recommended Signal List PRODUCT SPECIFICA TIONS (continued) With Digital RGB signal input (RGB1 input) ( ○ : acceptable) No. Signal mode Horizontal frequency (kHz) Dot clock frequency (MHz) Remarks Signal Name Resolution Vertical frequency (Hz) 1 NTSC-M PAL-M 525 59.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.
PHONO DVR STANDBY /ON PURE DIRECT 2CH/MULTI CH SPEAKERS VIDEO AUX REC OUT/ZONE 2 INPUT MODE SOURCE/REMOTE DVD DTV/LD MD/TAPE CD-R TUNER CD VIDEO AUX VCR 2 VCR 1 SAT CABLE A B STRAIGHT EFFECT MULTI CH .
Ima ge Retention Image Retention can be an issue for all plasma monitors, however if you follow the simple guidelines listed below, you can enjoy many years of viewing. YAMAHA has included a number of features in our range of plasma monitors which help to reduce image retention.
The video unit (PTB-4210) is included as standard equipment with this model ; therefore, descriptions of “Optional Video Unit Function” in this text can be used as is.
T o ensure correct usage Using the hooks at center of the rear of the plasma monitor, a commercially available cord or chain, and a clamp, secure the set to a firm wall or to a wall post.
1030 (40-9/16) 700 (27-9/16) 300 (11-13/16) 124 (4-7/8) 89 (3-1/2) 636 (25-1/16) 713 (28-1/16) 77 (3) 397 (15-5/8) Usage cautions Dimension diagram ■ Do not allow an adhesive material, such as an adhesive tape, into contact with the surface of the pedestal, as they may cause the exterior surface to peel.
T o ensure correct usage Using the hooks at center of the rear of the plasma monitor, a commercially available cord or chain, and a clamp, secure the set to a firm wall or to a wall post.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha PDM 4210 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha PDM 4210 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha PDM 4210 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha PDM 4210 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha PDM 4210 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha PDM 4210 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha PDM 4210 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha PDM 4210. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha PDM 4210 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
