Benutzeranleitung / Produktwartung DG60FX-112 des Produzenten Yamaha
Zur Seite of 32
Owner’ s Manual.
2 ADVARSEL! Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. VARNING Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren.
3 WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These precau- tions include, but are not limited to, the following: 1.
4 Thank you for pur c hasing the Y AMAHA DG60FX-112 Guitar Amplif ier . T o fully under stand the functions and to obtain maxi- mum life of this device , please r ead this Owner’ s Manual car efully befor e using. Also, after r eading this manual, please keep it and the warranty in a safe place for futur e r eference .
5 About the Backup Battery A backup battery (lithium battery) is used to keep internal data (settings) from being lost, even when the power cord is unplugged.
6 Nomenclature ■ Contr ol Panel q Input Jacks (INPUT HIGH, LO W) These are the input jacks for the DG60FX-1 12. Con- nect the guitar here. Use the jack labeled LOW for high output guitars and the jack labeled HIGH for low output guitars. * Make sure the power is switc hed OFF before connecting a guitar .
7 Nomenclature !2 Manual Button (MANU AL) Independent of the selected patch’s settings, this button changes the sound to the settings of the knob’s current position. The lamp will flash if the patch setting is changed. Press the [MANUAL] and [UTILITY] buttons simul- taneously to enter the External Control Setting Mode.
8 Nomenclature ■ Rear P anel @6 P ower Switch (PO WER) Power switch for the main unit. * T o pr otect the speakers, set the OUTPUT knob u to “0” befor e switching the power ON/OFF .
9 Nomenclature #4 #6 #5 #7 ● T op Panel ● Rear Panel #4 Foot Switches 1, 2, 3 According to the settings in the Utility Mode ( → page 23), the switches can be used as for the following functions. • Selects a patch (1/2/3) fr om the currently selected bank.
10 Connections Before making an y connections to any of the DG60FX-112’ s INPUT and/or OUTPUT jacks, make sure that the power on the DG60FX-112 and all other de vices is turned OFF to pre- vent electrical shock or dama ge to the devices.
11 ■ Connecting Headphones Connect a pair of headphones to the PHONES jack (standard stereo) on the DG60FX-1 12 to play or practice in private. The volume of the headphones can be controlled with the OUTPUT knob.
12 Using the DG60FX-112 First, connect a guitar to the DG60FX-112 and try some sounds. ■ Produce Sound 1. Before connecting, turn off the power on the DG60FX-1 12 and connect a guitar to either the LOW or HIGH INPUT jack.
13 ■ T r y Changing the Settings Use the knobs or buttons on the panel to create your own original tone. Using the DG60FX-112 • Continue rotating the knob in the previously de- scribed direction a.
14 Using the DG60FX-112 When another patch is selected, an y set- tings you ha ve altered will revert to their original settings. If you want to sa ve those settings, please use the Store operation described on page 17.
15 ■ T r y Selecting Another P atch The DG60FX-1 12 holds a total of 180 patch pro- grams (patch) in its internal memory . The 180 patches are divided into two areas each containing 10 groups, 3 banks and 3 patches. • AREA There are two areas, the USER AREA and the PRESET AREA .
16 ● Using the Foot Switch and the Bank Switch • Press a foot switch (1-3) to select the corre- sponding patch number 1-3 in the currently se- lected group/bank. * If the F oot Switch’ s function is set to “ EFF ” in the Utility mode, it will not be possible to select a patch using the F oot Switch.
17 Using the DG60FX-112 ■ Create and Store a Patc h Original settings can be stored in the USER AREA (01 1-933). T ry creating an original patch and then store it.
18 Using the DG60FX-112 ● Using the DG60FX-112 Without Patc hes The [MANUAL] button lets you control the DG60FX- 1 12 when patches are not used. Press the [MANUAL] button to enter the Manual Mode (the lamp lights). In this mode, all knobs and effect buttons are set to their present condition.
19 Compressor ● Comp (Compressor) Controlling the input signal (peak) this effect keeps the maximum level constrained to the level set with the knob. • COMP knob Rotate the knob to the right to increase the depth of the compression. When set to “0.
20 Effect Functions and Parameters • SPEED knob + [TREMOLO] Sets the phase difference between the left and right sounds. From 0 degrees to 360 degrees (0.0-10.0). Set to “5” the knob works like a ste- reo pan pot. • DEPTH knob + [TREMOLO] Sets the wave shape of the tremolo.
21 External Control Settings • trE : T one Control (TREBLE) • nnd : T one Control (MIDDLE) • bAS : T one Control (BASS) • PrE : T one Control (PRESENCE) • CP : Compressor Ef fect’s COMP se.
22 T uner Mode When the pitch is low , the CHORUS and FLANGER lamps will light. When the pitch is high, the ROT ARY and TREMOLO lamps will light. Tune the note until only the PHASER lamp lights. Tuning is complete. (At this time the BANK switch’s lamp will also light.
23 Utility Mode The Utility Mode is used for settings that co ver the o verall system of the DG60FX-112 suc h as the foot switc h, MIDI, external contr ol, EXP . PED AL jack, etc. ■ About the Utility Mode Press the [UTILITY] button to enter the Utility Mode (the lamp lights).
24 ■ MIDI Functions Press the [UTILITY] button and set the Amp Select switch to LEAD2 (“ mmd ” will appear). ● Create a MIDI Program Change Receive T able Sets the corresponding patch that will be recalled when a MIDI Program Change No. (referred to as PRG No.
25 T o send all USER AREA data ( 011 - 933 ) plus Utility settings with the Bulk Out operation. Press the [T APE ECHO] button (“ ALL ” will appear on the display), then press the [STORE] button to carry out the MIDI Bulk Out. T o send a single USER AREA patch (data) with the Bulk Out operation.
26 Utility Mode ● Set the P arameter’ s Maxim um V alue Press the [TREMOLO] button and use the [UP]/ [DOWN] buttons to set the parameter’s maximum value (the parameter’s value when the controller is set to its maximum: 0.
27 ■ W ah P edal Settings These settings are available when the Wah Pedal function (“ UUH ”) is selected as the controller in the External Control settings. Press the [UTILITY] button then set the amp select switch to CRUNCH1 (“ UUH ” will appear on the dis- play).
28 Error Messages If an error occur s during operation, one of the follo wing error messa ge numbers will appear on the display . E1 : MIDI Receive Buffer Full CA USE: T oo much MIDI data is being received by the DG amplifier at one time. SOLUTION: Try reducing the amount of data being sent or , break the data into smaller blocks.
29 Specifications Digital Section • Full Digital Signal Processing • 8 Channel Preamp • Digital Effects • Compressor • Chorus, Flanger, Phaser , Rotary Speaker , T remolo • Digital Delay ,.
30 MIDI Implementation Chart YAMAHA [ Guitar Amplifier] Date:30-Jun-2000 Model DG60FX-112 MIDI Implementation Chart Version : 1.0 +----------------------------------------------------------------------+ : : Transmitted : Recognized : Remarks : : Function .
31 MIDI Implementation Chart : : : : : : : : : : : : : : : : : : : : : : : : : :-------------------+----------------+----------------+----------------: :Prog : o 0 - 127 : o 0 - 127 : : :Change : True.
Printed in T aiwan V611000.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha DG60FX-112 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha DG60FX-112 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha DG60FX-112 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha DG60FX-112 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha DG60FX-112 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha DG60FX-112 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha DG60FX-112 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha DG60FX-112. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha DG60FX-112 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
