Benutzeranleitung / Produktwartung CDX-97 des Produzenten Yamaha
Zur Seite of 28
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
i As long as this unit is connected to the A C wall outlet, it is not disconnected from the A C po wer source ev en if you turn off this unit by POWER. D ANGER When this unit is plugged to the wall outlet, do not place your ey es close to the opening of the disc tray and other openings to look into inside.
English 1 En RANDOM-SEQUENCE PLA Y ...................... 12 REPEA T PLA Y .............................................. 12 Repeat a selected item .............................. 12 Repeat A-B ................................................. 13 PROGRAM PLA Y .
2 En What is MP3? “MP3 (MPEG-1 Audio Layer-3)” is a standard technology and format for compressing an audio sequence into a small- sized file. However , the original level of sound quality is preserved during playback. Some MP3 discs have the ID3 tag information.
English 3 En Battery installation 1. T urn the remote control over and remove the battery compartment cover by sliding it in the direction of the arrow . 2. Insert the batteries (AAA, R03, UM-4) according to the polarity markings on the inside of the battery compartment.
4 En ■ To connect this unit to y our amplifier , choose one of the wa ys listed below . Caution Do not plug in this unit to a wall outlet until all connections are complete.
English 5 En A udio CD MP3, WMA (CDX-497 only) IDENTIFICA TION OF COMPONENTS ( ) indicates the page number on which the controls are best described. POWER (p.
6 En SEARCH TIME/INFO FOLDER FOLDER ENTER FILE OUTPUT LEVEL FILE SYNCHRO T APE PEAK SP ACE REPEA T DIMMER RANDOM INDEX 0 9 6 5 8 7 2 1 4 3 OPEN/CLOSE A–B PROGRAM CLEAR DIMMER (p. 1 1) SYNCHRO (p. 21) SP ACE (p. 1 1) T APE (p. 16) Numeric buttons (p.
English 7 En Notes ● After closing the disc tray by pressing ) OPEN/CLOSE , the display shows the follo wing information. Caution When the disc tray is open, do not touch the inside gear wheel . If you touch the gear wheel, your finger may be caught in the closing tray and injured.
8 En Select a desired track by using the numeric buttons. Example: T o select a track number 5 Press “0” and then, press “5”. * In case of an MP3 or WMA f ile which has 100 f iles or more, press “0” twice and then, press “5”. * Pressing a desired track and waiting for a fe w second can also start playback.
English 9 En ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly . ● In case Manual search is performed, pause will be canceled.
10 En Notes ● The text information may not be displa yed with some CD-TEXT discs. ● This unit can only shows alphan umeric characters. Notes ● Some information of ID3 tags may not be displayed with some discs. ● This unit can only shows alphan umeric characters.
English 11 En Normal illumination Slightly dim Dim Notes ● When the automatic spacing function is in effect, the display of the total time and of the total remaining time includes each interval of the 4 seconds between tracks.
12 En Note If the power is switched of f during random-sequence play , pressing POWER again to turn on the unit automatically restores random-sequence play . ALL ” (Single repeat) A single track is played back repeatedly . * This also works for program play and random-sequence play .
English 13 En Repeat A-B Y ou can repeat the specified section of the disc by setting two points (start and end point). 1 Press A-B to select the start point of repeat play . 2 Press A-B to select the end point of repeat play . The selected section is played back repeatedly .
14 En 1 Press to stop the playback. 2 Press PROGRAM . Display inf ormation in step 3 1 Shows the total number of the tracks currently programmed. 2 Shows the total time of the tracks currently programmed. 3 Shows the program number for the track to be programmed next.
English 15 En To cancel the index searc h function Press INDEX . Notes ● Not all discs hav e index numbers. In addition, among those discs which hav e index numbers, not all discs necessarily hav e more than one index number . ● The index system is a method for sub-di viding tracks into smaller divisions for easier loca tion of those parts.
16 En 1 Press to stop the playback. * T he peak lev el search function of this unit is useful for adjusting recording lev el on the tape deck. (For details, refer to page 20.) 2 If desired, you can automatically insert additional time space between tracks.
English 17 En Notes ● In step 4, you can check the program data for side A and side B after pressing REPEA T . Information for each side is displayed for 3 seconds. 1 Shows the number of programmed tracks. 2 Shows the total time of programmed tracks.
18 En 5 Use numeric buttons to select the track numbers (to be recorded on the side B) in any order . 6 Press PROGRAM . 7 Start recording on the tape deck, and then press on the remote control of this unit. 8 This unit automatically pauses at the end of the side A.
English 19 En Notes ● Because programmed data changes ev ery time RANDOM is pressed, the unrecorded space at the end of each side of the tape also varies accordingly . ● All tracks may not be programmed if the tape length is not enough. T o program all tracks, use a tape that is longer than the actual playing time.
20 En To cancel the peak level sear ch function Press . Note Even if the peak le vel search is performed se veral times on the same disc, the same part may not be alw ays selected. That is because the unit searches for the peak le vel among parts of the disc that are randomly selected by the internal microcomputer .
English 21 En 4 Press . Both CD playback and tape deck recording start. * CD playback starts shortly after starting the recording. 5 If you want to stop recording temporarily and restart recording from a desired track, stop this unit by pressing , and the tape deck as well, then follow steps 3–4 again.
22 En Notes about handling compact discs ● Always handle the disc with care so that its surface is not scratched. ● Compact discs are not subjected to wear during playback, but damage to the disc surface when the disc is being handled can adversely affect the disc playback.
English 23 En If the unit fails to operate normally , check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized Y AMAHA dealer or service center for help.
24 En SPECIFICA TIONS A udio Section Frequency response ..................... 2 Hz – 20 kHz, ± 0.5 dB Harmonic distortion + noise (1 kHz) ................................................................ 0.003 % or less S/N ratio ...................
CAUTION VISIBLE AND INVISIBLE LASER RADIA TION WHEN OPEN. A VOID EXPOSURE T O BEAM. ADV ARSEL SYNLIG OG USYNLIG LASERSTRALING VED ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING. ADV ARSEL SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha CDX-97 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha CDX-97 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha CDX-97 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha CDX-97 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha CDX-97 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha CDX-97 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha CDX-97 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha CDX-97. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha CDX-97 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
