Bedienungsanleitung Y-cam White S Sicherheitsaparat

Zusammenfassung des Inhalts auf den nächsten Seiten der Bedienungsanleitung

Seite 1

   This  manual  applies  to  the  following  Y ‐ cam  products.  Y ‐ cam  Black  SD  Y Features  and  operations  listed  in  this  anual  depend  on  the  specific  model.
Seite 2

 Page  2   TABLE  OF  CONTENTS  1.0   INTRODUCTION  ................................................................................................................................................  4  1.1   A PPROVAL  I NFORMATION  .
Seite 3

 Page  3   6.31  D IGITAL  I/O  S ETUP  (Y ‐ CAM  B ULLET  O NLY )  ............................................................................................................................... ...  41  6.32  M OTION  D ETECTION  (I NTERNET  E XPLORER )  .
Seite 4

 Page  4   1.0  INTRODUCTION    Thank  you  for  purchasing  a  Y ‐ cam  wireless  internet  video  came ra.    Please  read  the  following  instruct ions  carefully  before  attempting  to  install  or  use  the  camer a.
Seite 5

 Page  5   1.2  Restrictions   1.  DO  NOT  use  this  product  to  violate  one' s  privacy.
Seite 6

 Page  6   1.5  Recommendations   1. New  firmware  versions  are  released  periodically  and  they  provide  new  features,  improvement  to  existing  features,  fixes  to  known  issues  or  bugs,  etc.
Seite 7

 Page  7   2.0  MAIN  FEATURES   Easy  Installation  The  setup  CD ‐ ROM  include s  the  Camera  Setup  software,  User  Man ual  and  Qui ck  Installation  Guide.
Seite 8

 Page  8    RTSP  MPEG4  Streaming  and  3GPP  Streaming  The  Y ‐ cam  live  stream  can  be  viewed  via  RealPlayer  or  QuickTime.
Seite 9

 Page  9   2.2  Y ‐ cam  Bullet  at  a  glance    .
Seite 10

 Page  10   2.3  microSD  Card  Information  and  Installation  Adding  a  microSD  to  your  Y ‐ cam  will  allow  you  to  record  footage  and  motion  alerts  direct  to  memory  card  for  future  review.
Seite 11

 Page  11   2.31  microSD  card  installation  for  Y ‐ cam  Black,  Knight  and  White  Models  The  microSD  memory  card  slot  can  be  f ound  on  the  bottom  of  the  Y ‐ cam.
Seite 12

 Page  12   3.0  INSTALLATION   For  initial  setup,  you  need  to  connec t  the  Y ‐ cam  directly  to  your  router,  switch  or  computer  via  a  network  cable.
Seite 13

 Page  13   3.2  Connecting  your  Y ‐ cam  directly  to  a  Computer   You  can  also  connect  the  Y ‐ cam  directly  to  a  compute r.
Seite 14

 Page  14   4.0  Y ‐ CAM  SOFTWARE  INSTALLATION   The  Y ‐ cam  Setup  utili ty  can  easily  and  quickly  detect  cameras  connected .
Seite 15

 Page  15   3. If  you  want  to  change  the  default  folder  click  “Change”  to  replace  otherwise  click  “Next”     4. Click  “Install”  to  install  the  Y ‐ cam  Se tup  utility.
Seite 16

 Page  16   4.11  Manually  Setting  TCP/IP  Settin gs  for  a  Camera  In  most  cases,  this  is  not  required  as  the  router  will  assign  the  correct  settings  to  the  camera.
Seite 17

 Page  17   5. Take  note  of  the  following:  a. IP  Address  b. Subnet  Mask  c. Default  Gateway  d.
Seite 18

 Page  18   4.2  Y ‐ cam  Software  Installation  for  Mac  1. Insert  the  Installation  CD  into  your  CD ‐ ROM  drive.   2. Browse  to  the  disk  and  open  the  Mac  directory.
Seite 19

 Page  19   4.3  Finding  your  Camera  with  Y ‐ cam  Setup  Now  you  have  your  camera  attached  and  the  software  ready,  you  are  ready  to  find  your  camera  on  your  network.
Seite 20

 Page  20   5.0  WELCOME  TO  YOUR  Y ‐ CAM!   Once  you  have  used  the  Y ‐ cam  Setup  Software  to  find  your  camera .
Seite 21

 Page  21   5.1  User  Interface  (Internet  Explorer)  Upon  verification  of  the  username  and  password,  the  camera  image  will  load.
Seite 22

 Page  22   Explanation  of  Operating  Bar      1)  Mute.  Click  the  Mute  button  to  mute  the  audio.   2)  Slide  the  slide  block  horizontally  to  adjust  volume.
Seite 23

 Page  23   5.2  User  Interface  (Firefox  and  Safari)   Upon  verification  of  the  username  and  password,  the  camera  image  will  begin  to  load.
Seite 24

 Page  24   6.0  Y ‐ CAM  SETTINGS   You  can  now  view  your  camera  live,  but  this  is  only  on  your  local  network,  and  you  still  need  wireless  to  be  setup,  as  well  as  many  other  settings.
Seite 25

 Page  25   If  you  need  to  add  access  for  another  user ‐ with  an  easier  to  remember  password ‐ you  can  set  that  up  later.   Once  you  have  typed  your  password  twice,  press  “Save”.
Seite 26

 Page  26   6.01  Wizard  –  Easy  Setup  In  order  to  facilitate  the  setup  of  the  Y ‐ cam  there  is  a  Wizard  that  helps  non  technical  users  setup  the  camera  very  easily.
Seite 27

 Page  27   6.1  CAMERA  MENU   The  Camera  menu  is  located  on  the  right  of  the  Settings  screen.  When  you  click  on  the  word  “Camera”,  a  sub ‐ menu  of  camera  setup  options  will  be  displayed.
Seite 28

 Page  28   [Volume]  Adjusts  the  sensitivity  of  the  microphone  from  0~14  where  0  is  the  lowest.   [G.726  bit  rate]  Four  options:  16,  24,  32,  40(kbps).
Seite 29

 Page  29   6.12  Stream  Setup  Click  on  Stream  Setup  under  the  Camera  Menu  to  ch ange  the  stre aming  setti ngs  for  your  camera.
Seite 30

 Page  30   your  connection  speed  and  network  traf fic.  If  you  are  experiencing  jerky  video  it  may  be  necessary  to  decre ase  the  bitrate.
Seite 31

 Page  31   6.13  OSD  Setup  Click  on  OSD  Setup  under  the  ti tle  Camera  to  change  the  on ‐ screen  display  para meters  of  th e  camera.
Seite 32

 Page  32   6.14  Night  Vision  Setup*  The  Y ‐ cam  utilizes  30  infrared  LEDs  to  provide  high  levels  of  light  in  dark  environments.
Seite 33

 Page  33   6.2  Network  Menu  The  Network  menu  is  located  on  the  right  of  the  Settings  screen.  When  you  click  on  the  word  “Network”,  a  sub ‐ menu  of  network  setup  options  will  be  displayed.
Seite 34

 Page  34   [Mode]  Infrastructure  mode  or  Adhoc  mode:   Adhoc  Mode :  Select  Adhoc  mode  when  you  want  to  connect  the  ca mera  wirelessly  directly  to  your  computer.
Seite 35

 Page  35    6.212  Adhoc  Wireless  Setu p  Options  If  you  want  to  make  a  direct  wireless  connection  from  your  camera  to  your  computer,  you  will  need  to  setup  the  Y ‐ cam  in  “Adhoc”  mode.
Seite 36

 Page  36   6.22  TCP/IP  Setup  The  Y ‐ cam  is  setup  to  obtain  an  IP  address  automatically  (DHCP)  from  your  Network  by  default,  so  these  settings  should  not  be  needed  by  most  users.
Seite 37

 Page  37   6.23  PPPoE  Setup  The  Y ‐ cam  can  be  installe d  without  a  PC  on  the  network.  Some  XDSL  services  use  PPPoE  (Point ‐ to ‐ Point  Protocol  over  Ethernet).
Seite 38

 Page  38   6.24  DDNS  Setup  If  you  have  a  broadband  connection  that  gives  you  a  dynamic  IP  address  every  time  you.
Seite 39

 Page  39   6.25  UPnP  Setup  Y ‐ cam  supports  UPnP  (Universal  Plug  and  Play)  which  is  enabled  by  default.
Seite 40

 Page  40   6.26  Viewing  your  camera  externally  Now  you  have  setup  your  DDNS  account  and  enabled  UPNP,  you  should  be  able  to  view  your  camera  externally.
Seite 41

 Page  41   6.3  Alarm  Menu  The  Alarm  menu  is  located  on  the  right  of  the  Setti ngs  screen.  When  you  click  on  the  word  “Alarm”,  a  sub ‐ menu  of  alarm  setup  options  will  be  displayed.
Seite 42

 Page  42     Digital  I/O  Settings  [ Digital  Input] ‐  Enable  or  Disable  the  di gital  input   [Digital  input’s  active �.
Seite 43

 Page  43   6.32  Motion  Detection  (Internet  Explorer)  Motion  Detection  can  trigger  an  alarm  that  sends  images  via  e ‐ mail  or  FTP  (File  Transfer  Protocol).
Seite 44

 Page  44   6.33  Motion  Detection  (non  Internet  Explorer)   Motion  Detection  can  trigger  an  alarm  that  sends  images  via  e ‐ mail  or  FTP  (File  Transfer  Protocol).
Seite 45

 Page  45   6.34  Schedule  Setup  The  Alarm  that  the  motion  detection  triggers  can  be  setup  to  be  active  or  non ‐ active  at  certain  times  of  the  week.
Seite 46

 Page  46   6.35  Alarm  Management ‐ FTP  The  Y ‐ cam  can  upload  an  image  to  an  FTP  server  or  send  an  email  upon  receiving  an  alarm  from  the  motion  detection  window.
Seite 47

 Page  47   6.36  Alarm  Management ‐ Email  The  Y ‐ cam  can  also  be  con f igured  to  send  an  email  when  the  Motion  Detection  alarm  is  triggered.
Seite 48

 Page  48   6.37  Periodic  Sending ‐ FTP  The  Y ‐ cam  can  upload  an  image  to  an  FTP  server  at  spec ific  time  intervals.
Seite 49

 Page  49   6.38  Periodic  Sending ‐ Email  The  Y ‐ cam  can  be  confi gured  to  send  an  E ‐ mail  at  specific  time  intervals.
Seite 50

 Page  50   6.39  Buffer  Management  This  function  is  very  useful  when  che cking  to  see  what  happened  immediately  before  and/or  after  a  trigger.
Seite 51

 Page  51   6.4  Alarm  Server  The  Alarm  Server  menu  is  locate d  on  the  right  of  the  Settings  screen.
Seite 52

 Page  52   6.42  E ‐ mail  Servers  The  Y ‐ cam  can  be  confi gured  to  send  an  E ‐ mail  when  the  Motion  Detection  alarm  is  triggered  or  It  can  send  a  snapshot  after  specified  intervals.
Seite 53

 Page  53   [Subject]  Subject  of  the  e ‐ mail  that  is  sent.  Entering  a  relevant  subject  will  help  identify  the  alarm  better.
Seite 54

 Page  54   6.5  SD  Functions  (Shows  when  microSD  card  is  inserted)  The  SD  functions  menu  will  only  be  displayed  once .
Seite 55

 Page  55   [Split  Time  of  Record  file]  This  specifies  the  maximu m  duration  of  one  file.  If  the  recording  goes  on  for  longer  than  this  parameter  the  camera  will  split  the  video  into  a  number  of  files.
Seite 56

 Page  56   6.52  Snapshot  on  Alarm  Snapshot  on  alarm  records  a  JPG  snapshot  to  the  microSD  card  upon  detection  of  motion  trigger.     [Alarm  Mode]  Activate/  Deactivates  the  motion  de tection  alarm.
Seite 57

 Page  57   6.53  Continuous  Record  Continuously  records  footage  to  the  microSD  card.     [Continuous  Record]  Enable/Disable  savi.
Seite 58

 Page  58   6.54  Snapshot  at  Interval  Snapshot  at  interval  records  a  JPG  snapshot  to  the  microSD  card  at  a  set  interval.
Seite 59

 Page  59   6.55  SD  File  FTP  Sending  Configures  the  camera  to  automati cally  upload  the  contents  of  a  MicroSD  card  onto  an  FTP  Server.
Seite 60

 Page  60   6.56  Browse  SD  card  Clicking  on  Browse  SD  Card  will  take  you  to  the  following  screen  where  you  can  vie w  or  download  the  contents  of  the  MicroSD  card.
Seite 61

 Page  61   6.57  SD  Format  Clicking  on  SD  format  will  take  you  to  the  following  screen  where  you  can  monitor  the  status  of  the  memory  card  –  showing  space  used  and  space  available.
Seite 62

 Page  62   6.6  Tools  Menu  The  Tools  menu  is  located  on  the  right  of  the  Settings  screen.  When  you  click  on  the  word  “Tools”,  a  sub ‐ menu  of  setup  options  will  be  displayed.
Seite 63

 Page  63   6.62  User  Management  Allows  you  to  add  or  remove  users  who  can  view  your  camera.  Useful  if  you  want  to  allow  others  to  view  your  camera,  without  having  full  admin  rights.
Seite 64

 Page  64   6.63  Date  &  Time  Allows  you  to  set  the  date  and  ti me ‐ used  for  timestamp  and  for  storage  of  files  on  the  microSD  card.
Seite 65

 Page  65   6.64  Backup  and  Reset  Allows  you  to  reset  the  camera  to  fa ctory  defaults,  allows  you  to  backup  the  configuration  incase  of  accidental  reset  and  allows  you  to  restore  settings  from  a  backup.
Seite 66

 Page  66   6.65  Firmware  Upgrade  From  time  to  time  a  new  firmware  may  be  released  for  your  model  of  Y ‐ cam.   To  check  for  updates,  con sult  the  Y ‐ cam  website  at  http://www.
Seite 67

 Page  67   Once  you  have  located  the  file  and  selected  it,  click  Upgrade.   When  you  click  upgrade,  the  process  will  start.  This  can  take  5 ‐ 10  minutes.
Seite 68

 Page  68   6.7  System  Menu  From  within  the  Settings  menu,  clicking  on  “System”  at  the  top  right  will  list  th e  system  information  about  your  Y ‐ cam.
Seite 69

 Page  69   6.8  Support  Menu  Click  Support  to  see  current  support  information.     If  you  are  having  problems  with  your  Y ‐ cam,  you  should  first  of  all  seek  help  from  your  place  of  purchase.
Seite 70

 Page  70   6.9  Reboot  Click  Reboot  to  restart  the  Y ‐ cam.  Rebooting  the  ca mera  will  retain  all  the  settings  and  configurations.
Seite 71

 Page  71   7.0  ADVANCED  SETTINGS   7.1  Port  Forwarding  Firewall  security  features  built  into  some  routers  may  prevent  users  from  accessing  the  Y ‐ ca m  over  the  Internet.
Seite 72

 Page  72   7.2  Proxy  Server  Setting  A  proxy  server  may  prevent  you  from  connecting  to  the  Y ‐ cam  in  some  corporate  environments.
Seite 73

 Page  73   7.3  Enabling  Active  X  in  Internet  Explorer  Your  browser  must  have  Active  X  enabled  to  view  the  camera  in  Int ernet  Explorer.
Seite 74

 Page  74   7.4  Recovering  from  a  failed  Firmware  update  If  you  have  tried  to  install  a  new  firmwa re  on  your  camera,  and  the  proce dure  has  failed,  your  camera  may  be  unresponsive.
Seite 75

 Page  75    13. Type  this  command  in  to  the  prompt:  "tftp ‐ i  192.168.168.1  put  YOUR_FI RMWARE_NA ME.mfw"   14. You  will  need  to  replace  Y OUR_FIRMW ARE_NAME.
Seite 76

 Page  76   7.5  Resetting  the  Y ‐ cam  to  Factory  Defaults  There  are  two  ways  to  reset  the  Y ‐ cam  back  to  its  factory  defaults:   1.
Seite 77

 Page  77   7.8  Viewing  your  Y ‐ cam  on  a  Mobile  Phone  Y ‐ cam  is  dedicated  to  providing  easy  to  use  IP  cameras.
Seite 78

 Page  78   8.0  TROUBLE  SHOOTING   Problem   Cause  and  Remedy   I  forgot  the  IP  address  of  the  Y ‐ cam  1.  Use  the  supplied  Y ‐ cam  Setup  progra m.
Seite 79

 Page  79   The  motion  detection  feature  does  not  send  e ‐ mail  alert s.   1.  Check  the  e ‐ mail  alert  feature  is  properly  configured  2.
Seite 80

 Page  80   9.0  GLOSSARY  OF  TERMS   Adhoc  Mode:  A  wireless  network  system  in  which  devices  communi cate  directly  with  each  other,  without  the  use  of  a  wireless  router.

Lesen Sie die Bedienungsanleitung Y-cam White S - vermeiden Sie Probleme

Ein wichtiger Punkt beim Kauf des Geräts Y-cam White S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:

um zu wissen, wie man das Gerät richtig nutzt
um zu wissen, wie man es wartet/ eine jährliche technische Überprüfung des Produkts Y-cam White S durchführt
um zu wissen, wie man im Fall einer Störung mit Y-cam White S umgehen soll

Wenn Sie Y-cam White S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Y-cam White S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Y-cam White S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Y-cam White S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.

Wenn Sie aber schon Y-cam White S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Y-cam White S verkürzen könnten.

Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Y-cam White S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Y-cam White S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.

Y-cam White S Bedienungsanleitung

URL teilen

Ähnliche Anleitungen

URL teilen

Ähnliche Anleitungen

Zusammenfassung des Inhalts auf den nächsten Seiten der Bedienungsanleitung

Seite 1

Seite 2

Seite 3

Seite 4

Seite 5

Seite 6

Seite 7

Seite 8

Seite 9

Seite 10

Seite 11

Seite 12

Seite 13

Seite 14

Seite 15

Seite 16

Seite 17

Seite 18

Seite 19

Seite 20

Seite 21

Seite 22

Seite 23

Seite 24

Seite 25

Seite 26

Seite 27

Seite 28

Seite 29

Seite 30

Seite 31

Seite 32

Seite 33

Seite 34

Seite 35

Seite 36

Seite 37

Seite 38

Seite 39

Seite 40

Seite 41

Seite 42

Seite 43

Seite 44

Seite 45

Seite 46

Seite 47

Seite 48

Seite 49

Seite 50

Seite 51

Seite 52

Seite 53

Seite 54

Seite 55

Seite 56

Seite 57

Seite 58

Seite 59

Seite 60

Seite 61

Seite 62

Seite 63

Seite 64

Seite 65

Seite 66

Seite 67

Seite 68

Seite 69

Seite 70

Seite 71

Seite 72

Seite 73

Seite 74